RE: [bolger] Re: Plywood Again???
- I prefer Joubert Okoume Marine from Anderson International Trading
www.aitwood.com <http://www.aitwood.com/> has 5 ply 6 m/m for $52.98 per
sheet; Beautiful stuff and worth the price, it has a BS1088 rating. I have
built a mess of plywood and cold-molded boats and one plywood airplane and
this is the best that I've seen. I just bought all of the plywood to build
Bolger's Marine Van $5400.00 (I'm stretching it to 29'), but I'll save many
hours of finishing time. The greatest investment that we make is our time,
and it is not replaceable; I used to build out of any thing I could find
until I realized that if it was worth the investment in time then it was
worth the money for the best materials that i could find. Tim P Anderson
From: firstname.lastname@example.org [mailto:email@example.com] On Behalf Of
Sent: Wednesday, January 02, 2008 7:54 AM
Subject: Re: [bolger] Re: Plywood Again???
Pricing I've gotten for "signal MDO" is higher than Okoume ply. I'm sure
it's very good but regular MDO is where the savings is. There may be
voids to fill and it is heavy but I've had some outside for a year and
nothing is apparent. I sided my boat shed 3/8,10ft sheets but didn't get
around to painting, and it makes a not unattractive building with green
ondura roof. Clyde PS I think I mentioned earlier, that 8ft long, 10 ft
high wall sections are all I and a friend wanted to lift to stand up.
Peter Lenihan wrote:
> --- In bolger@yahoogroups. <mailto:bolger%40yahoogroups.com> com<mailto:bolger%40yahoogroups.com>,
> "mike" <mikearedmond@...> wrote:[Non-text portions of this message have been removed]
> > Hi everybody an a happy New Year thrown in there also,,,Must be the
> > Scrooge in me, taking over my boat building urges...been chequing
> > posts on the internet concerning Ultraply,,some kind of supposed to
> > good quality underlay plywood.(Still have to find out if it is
> > available in Canada ei specifically Edmonton area).Has anyone built
> > boat with this stuff amonsght all of you fellows,ei;also awfull
> > about MDO...Mike
> Hi Mike,
> Cannot speak to your Ultraply query but can probably go on for ages
> about MDO :-)
> I have used it in the past for a MICRO I built(see files section in
> the MICRO folder; Lenihan's MICRO) and continued using it during the
> build of my Bolger WINDERMERE esturary cruiser.The best stuff I have
> found is from Olympic ply,ex-Simpsonply, called SIGNAL MDO. Absolutely
> great stuff,virtually no voids,waterproof glue between the laminates
> and takes a finish like magic and much cheaper then marine ply. I am
> sure if you drill around this group, via the search function, you'll
> come up with lots of recommendations/discussions about the virtues of
> MDO. Just be certain you are getting top quality MDO and stuff that
> looks like it was wrapped in Kraft paper :-)
> What are you looking to build with MDO?
> Peter Lenihan, a not too unbiased person regarding MDO, from along the
> snow covered,swept and frozen shores of the St.Lawrence...........
[Non-text portions of this message have been removed]
- That's exactly what I did. I don't know how thick their skins are; but If I
were in a position to order a boat build that way I'd insist on a filling of
the slots at leats with more foam.
I really don't claim or want to argue my point beyond the fact that I looked
at it in a very amateurish way; but decided I didn't trust this method; or
voids and gaps between skin sheets in a composite.
Now no matter how wrong I might be; I'm never going to be particular happy
in a boat that has this issue; so I avoid it.
On Jan 8, 2008 11:31 PM, Stefan Probst <firstname.lastname@example.org>
> --- "Hajo Smulders" <hajosmulders@...> wrote:[Non-text portions of this message have been removed]
> > Slots were probably up to an half an inch wide in a 2 inch piece
> > of foam at the 'open side' of the curve. These were gaps; not voids.
> Something like on
> under the headline "Wide foam sheet planking"?
> Seems to be ok there.