Loading ...
Sorry, an error occurred while loading the content.

Re: [bolger] Re: HI all, Request for help with lexan window install

Expand Messages
  • Roger Derby
    Actually, you don t need to heat it at all. It can be bent in a sheet metal brake. I ve also bent some strips in a vise with a hammer after cushioning the
    Message 1 of 7 , Apr 27, 2004
    • 0 Attachment
      Actually, you don't need to heat it at all. It can be bent in a sheet metal
      brake. I've also bent some strips in a vise with a hammer after cushioning
      the vise jaws and making provision for a moderate bend radius.

      Roger

      ----- Original Message -----
      From: "Lincoln Ross" <lincolnr@...>
      >
      > BTW, if you heat it up enough (considerably hotter than plexi needs to
      > do the same thing) you can bend the stuff into some nice shapes.
    Your message has been successfully submitted and would be delivered to recipients shortly.