Loading ...
Sorry, an error occurred while loading the content.

Re: Still more MDO

Expand Messages
  • doug6949
    ... outerlayer and ... 3/8 MDO as ... Check the materials carefully if you go this route. 3/8 ply is usually 11/32 . 1/4 ply generally runs close to 5/16
    Message 1 of 4 , Mar 29, 2004
    • 0 Attachment
      --- In bolger@yahoogroups.com, TOMCBRADY@C... wrote:

      > of the boat. My thought was that I would use 3/8'' MDO for the
      outerlayer and
      > 3/8'' exterior plywood for the inner layer on the sides and use
      3/8''MDO as
      > the outer layer and two layers of 3/8'' plywood for the inner layers
      >

      Check the materials carefully if you go this route. 3/8" ply is
      usually 11/32". 1/4" ply generally runs close to 5/16" and is nearly
      alway much better quality than 3/8". You might get away with 1/4".

      Doug
    Your message has been successfully submitted and would be delivered to recipients shortly.