Loading ...
Sorry, an error occurred while loading the content.
 

Dealing with tape selving (was Re: Tack and tape question)

Expand Messages
  • dagon_gsl
    ... Yup. But you need to have a sharp blade so it only takes a little pressure. If you pull the waste strip off as you move along you can make cut a pretty
    Message 1 of 26 , Jul 26 2:45 PM
      --- In bolger@y..., David Ryan <david@c...> wrote:
      > >Good tip, how do you ensure you aren't cutting into the wood?

      > Don't press too hard.


      Yup. But you need to have a sharp blade so it only takes a little
      pressure. If you pull the waste strip off as you move along you can
      make cut a pretty accurate depth. Sometimes I go too light and have
      to make a second, feather-light touch to finish the cut.

      Kellan
    Your message has been successfully submitted and would be delivered to recipients shortly.