- http://www.mcmaster.com/cgi/loadpage.cgi?pagenum=1854&descid=7296 Look at the bottom under cold galvanizing compounds ... square ... being ... the ... pieceMessage 1 of 5 , Oct 1, 2001View Sourcehttp://www.mcmaster.com/cgi/loadpage.cgi?pagenum=1854&descid=7296
Look at the bottom under "cold galvanizing compounds"
--- In bolger@y..., willsamson@y... wrote:
> > If it's only the top that is causing grief, why not have a wider
> > welded to the top for the tiller to attach to? It could be
> sided to
> > allow more bearing surface, which would cut down the wiggle even
> I'd thought about that, but the wider bit at the top couldn't be
> galvanised in situ, and would prevent the rudder and stock from
> drawn out through the hole for galvanising - unless you know of an
> effective alternative to hot-dip galvanising that can be done on
> At the moment, Chuck Leinweber's suggestion of a pilot 'plug' fixed
> to the 2" auger bit sounds feasible. I could make the plug from
> hardwood and epoxy it onto my 2" bit. I hope that would be strong
> enough - and then it could be removed later. Alternatively, a
> of copper tubing could be used as the plug, and soldered onto the
> bit. No great problem to un-solder it afterwards.
> Thanks again for all your thoughtful replies.
- I was going to respond to this and forgot. The best site of maritime links on the web. http://www.boat-links.com/boatlink.html I am sure somebody sent it toMessage 2 of 5 , Nov 27, 2001View SourceI was going to respond to this and forgot. The best site of maritime
links on the web.
I am sure somebody sent it to you but if not, then here it is.
Levent OZDEMIR wrote:
> hi all,
> We have prepared a web site for our yacht building
> firm, and I wish to submit its URL to yachting/
> boating portals like boatbuilder.com
> But I dont know much sites. I searched on yahoo but I
> found only 4 or 5 marine directories.
> So at this point I need your help to find such portals
> and submit my site.
> Can you send me URLs of these portals?
> Thank you
> Levent OZDEMIR
> Naval Architect