- Hi guys. I seek your help. I had a Micro in my future for some coastal cruising and a little off shore sailing. Then about three weeks ago I discoveredMessage 1 of 39 , Sep 1, 2001View SourceHi guys. I seek your help. I had a Micro in my future for some
coastal cruising and a little off shore sailing. Then about three
weeks ago I discovered Paradox, a Matt Layden design 14'. I think I
have fallen in love the more I see of it. Not quite as much boat as
Micro, but I think it would fit my wife and I perfectly.
Please take a look at it at this site:
I've been lurking on this group about two months and I would really
like to hear your opinions comparing the two boats. You guys
have "Been there and done that"! At least some of your have.
OK fellows. Let me have it. I think I can take it!
- ... Did ... I built the boat pretty much exactly as Jim MIchalak specifies, with a few minor exceptions. I *think* I used 6oz cloth. I only glassed theMessage 39 of 39 , Sep 16, 2001View SourceComments below:
--- In bolger@y..., ravenous@g... wrote:
> what weight glass cloth did you use on the outside of the hull?
> you glass right over the chine logs in one piece?
I built the boat pretty much exactly as Jim MIchalak specifies, with
a few minor exceptions. I *think* I used 6oz cloth. I only glassed
the bottom on the outside. First I did the bottom with the cloth,
covering the chine logs completely on the sides (but not going any
farther down the sides (the hull was upside down of course). Then I
laid 3" tape on the corners of the chine logs. Finally, I added some
extra layers of tape in the bow grounding area.
> Did you epoxy coat the inside or the deck?
Nope. I just used oil based house paint and primer, but I will use
Latex from now on. Of course I religiously knocked out all of the
little knot hole losse pieces and filled them with thickened epoxy.
> I'm starting the AF4 and
> am thinking about a light glass inside and out after completing the
> hull to avoid the checking of cheap BC Pine ply.
> Have you experienced any checking yet with the Fir?
I used AC Fir from the local yard. Yes I have had some checking, but
it doesn't bother me. I used a plywood pirogue for many years (in
South Lousiana) that was checked all over and never had any
problems. One bulkhead, however seems to be made of a defective 1/4"
sheet which has a 4" bubble de-laminated. I think I'll have to
replace the bulkhead in a year or so.
I do keep the boat in a garage, but may put her outside soon. We will
see what happens. I made a little A-frame to drape a tarp over her
> Any thoughts appreciated. I've bookmarked your site. It is very
> informative and helpful. Beautiful boat.
> > I built my 16' AF3 Sharpie, "Cream Cheese," for about $1,800 not
> > including trailer and gratuitous marine supplies, but I bet I
> > do it for $1200 if I felt like it.
> > http://www.geocities.com/sanmi
> > Frank