Loading ...
Sorry, an error occurred while loading the content.

36288Re: micro sheer clamp......how?

Expand Messages
  • Peter Lenihan
    May 3, 2004
    • 0 Attachment
      --- In bolger@yahoogroups.com, "Jason Stancil" <jasonstancil@h...>
      > > Now,working backwards,back out the screws only enough to
      > > release the rubrail while your helper holds the now straightening
      > > out end and keeps it from twisting and breaking.
      > Huh? what does that mean?

      It "means" that this is what is going to be happening as you
      remove the rubrail from its "dry fit" stage,prior to hollowing and
      gluing.You want to make sure the end being freed from the crews does
      not fall off and crack uncerimoniously.Also,do not back out the
      screws too far since you want to keep just a little point sticking
      out proud to serve as guide points for perfect re-attachment.This is
      most helpful since a rub rail loaded with glue is going to be one
      slippy snake and with it smearing all over the place :-), you'll be
      hard pressed to find your pencil line again underneath the glue.......

      Hope this makes better sense and that it is not too late to be


      Peter Lenihan,ex owner/builder of Lestat.........
    • Show all 9 messages in this topic