Loading ...
Sorry, an error occurred while loading the content.

Messages List

2228

From: Tony Lettkeman Hi How are you? Breaking news from Oprah: http://yalock.com/should/age.php She says the results are unbelievable! Tony Lettkeman Sent from Yahoo Mail for

Tony Lettkeman
Feb 19
#2228
 

Messages List

1991

Using Solidworks eDrawings One of the files in the 2014 Game Files / Field folder is an eDrawings model of the playing field. This is a 3D model of the playing field that can be read

dmgauntt2002
Sep 2, 2014
#1991
 

Messages List

1969

CPU board component placement if a previous driver places bottom registers and middle components and I follow must I placed top register and then go to the side pieces or will a bottom

patriciahasley
Nov 8, 2013
#1969
 

Messages List

1968

Re: toggle function Sorry! Here is the video link: http://www.mathworks.com/videos/controlling-servomotor-angle-with-gamepad-buttons-79221.html?type=shadow Thanks Sandeep

Sandeep Math
Nov 1, 2013
#1968
 

Messages List

1967

Re: toggle function Yes, you can do that by using a Latch block from the BEST Simulink library. The latch will make sure that the arm stays up until you press the button again,

Sandeep Math
Nov 1, 2013
#1967
 

Messages List

1966

toggle function Does Simulink have a toggle function to enable pressing a joystick button once to activate a servo and pressing it a second time to deactivate it? I want to be

hofloyt
Nov 1, 2013
#1966
 

Messages List

1965

Re: programming problems Cameron, Try just a "Joystick to Servo" command inside the While(1) loop. Make sure you have solid green Joystick and Robot LEDs and the VexNet LED are

Michael Blazer
Oct 23, 2013
#1965
 

Messages List

1964

Re: programming problems I tried this and the servo ran just fine but when i hooked it up to a joystick it went all spazzy again. What do i do? On Wednesday, October 16, 2013 5:55 PM,

Cameron Newbold
Oct 23, 2013
#1964
 

Messages List

1963

Re: programming problems Cameron, Run Michael Blazer's test code. If the servo doesn't work as described, then try using a different channel on the Cortex, or connect a different

dmgauntt2002
Oct 17, 2013
#1963
 

Messages List

1962

Re: programming problems Cameron, As noted on other posts, you should get 120° of rotation under program control. On the hardware side, try swapping in another servo, check that your

Michael Blazer
Oct 16, 2013
#1962
 

Messages List

1961

Re: programming problems I am from the killdeer school and don't worry about giving to much information i can usually follow just fine. when i tried to do this the servo started to

Cameron Newbold
Oct 16, 2013
#1961
 

Messages List

1960

Re: programming problems Joystick Calibration Procedure Cameron,  Do the Joystick Calibration Procedure also. If you motors are not working correctly this could be the problem. When I

RALPH WILLIAMS
Oct 15, 2013
#1960
 

Messages List

1959

Re: programming problems Cameron, Have you tried compiling and downloading the default program? (It's available here

Michael Blazer
Oct 15, 2013
#1959
 

Messages List

1958

programming problems i am having problems where the motors and servos wont respond properly to the programming. what do i do?

cameron_newbold
Oct 15, 2013
#1958
 

Messages List

1956

Re: .080 pitch , 1/4 inch wide belt stock 3 ft long Ralph, The Generic Kit Usage Guide, page 19, has one method. Another method that my team (I'm a long term mentor) has used when you need to drive a large

Michael Blazer
Oct 11, 2013
#1956
 
View First Topic Go to View Last Topic
Loading 1 - 15 of total 2,228 messages