185RE: [beemonitoring] cardboard tubes, various sizes and intro.
- Feb 11, 2008Found it!
thanks to this website
From: email@example.com on behalf of Wilson, Michael E
Sent: Mon 2/11/2008 7:51 AM
Subject: RE: [beemonitoring] cardboard tubes, various sizes and intro.
Thanks to all for the for the numerous tips.
With the extra router bits and drilling we will be in
good shape. However, if I can just
find a 5/16th router bit we will be even better.
This looks to be very close to the 7.5mm recommended for
Osmia lignaria. It would be nice to have that size for
our routed boards, but no one online seems to carry a 5/16th.
From: firstname.lastname@example.org on behalf of Jack Neff
Sent: Fri 2/8/2008 10:36 AM
Subject: Re: [beemonitoring] cardboard tubes, various sizes and intro.
Michael: You probably won't be able to get the range
of straws you mention (2-10 mm) without spending some
serious coin as most sizes would have to be custom
manufactured. For relatively small lots, an easy
technique is simply using a handheld drill to bore
single holes in pieces of pine molding cut to
appropriate lengths. (see Krombein, 1967 "Trapnesting
Wasps and Bees...." Parting strip works fine for the
smallest sizes (2-4 mm), 3/4x3/4 for the intermediate
sizes and 1x1 for the largest. Extra long drill bits
are available in all but the smallest sizes. In the
real world, a 12 cm, 8 mm nest is unlikely to be fully
utilized so shorter holes are usually readily
accepted. If of decent quality (no knots), the
individual are easily split to inspect the nests, and
unlike straws, can be opened and closed many times.
This is also an advantage over routed nests although
the latter are much cheaper on a per nest basis..
--- Michael Wilson <mwilso14@...> wrote:
> Hi,John L. Neff
> My name is Michael Wilson. I'm a graduate student at
> the University of
> Tennessee, Knoxville and am doing a study on native
> bees in our area,
> primarily at cucurbit plantings. I'm glad to have
> found this group and
> have enjoyed reviewing the material.
> Part of my project is to put out various size trap
> nests in different
> areas to asses 'stick nesting' bee presence.
> Ideally, I would like a
> wide variety of diameter of cardboard tubes from 2mm
> - 10mm to use as
> explained in Practical Pollination Biology. I have
> some reed inter
> nodes, but not as many as I would like. We also
> routed out some boards
> to stack, but only have 2 different sizes of router
> bits to choose
> from and have been unable to find more bit sizes.
> Is there a reasonable place to buy a wide variety of
> cardboard tube
> The places I've seen on the internet either require
> bulk (very bulk)
> purchasing or only have the size for the Blue
> Orchard Bees. I may
> drill sticks and blocks or try and find some more
> reeds if I can't get
> a variety of tubes. Are there other options?
> Also, anyone know when putting out nests in my area,
> (East Tennessee)
> will be too late to get some species? I'm thinking
> as long as I have
> everything out by the end of February I'll be OK.
> Michael Wilson
Central Texas Melittological Institute
7307 Running Rope
Austin,TX 78731 USA
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
- << Previous post in topic Next post in topic >>