Loading ...
Sorry, an error occurred while loading the content.
 

Re: [atlas_craftsman] Craftsman Atlas 12" Follow Rest

Expand Messages
  • Guenther Paul
    Paul David needs 1/2-16 acme lead screws GP ________________________________ From: Paul DeLisle To: atlas_craftsman@yahoogroups.com;
    Message 1 of 19 , Sep 22, 2013
      Paul
      David needs 1/2-16 acme lead screws
       
      GP

      From: Paul DeLisle <ferretpd@...>
      To: atlas_craftsman@yahoogroups.com; thehairs@...
      Sent: Saturday, September 21, 2013 7:05 PM
      Subject: RE: [atlas_craftsman] Craftsman Atlas 12" Follow Rest
       
      Let’s try that again:
      (Click on the number…3/4” x 16 precision rods)
       
      From: Paul DeLisle [mailto:ferretpd@...]
      Sent: Saturday, September 21, 2013 6:02 PM
      To: 'atlas_craftsman@yahoogroups.com'; 'thehairs@...'
      Subject: RE: [atlas_craftsman] Craftsman Atlas 12" Follow Rest
       
      Or try here…much cheaper:
      http://www.mcmaster.com/#=olxyjv
       
       
       
      From: atlas_craftsman@yahoogroups.com [mailto:atlas_craftsman@yahoogroups.com] On Behalf Of John
      Sent: Saturday, September 21, 2013 5:43 PM
      To: atlas_craftsman@yahoogroups.com; thehairs@...
      Subject: RE: [atlas_craftsman] Craftsman Atlas 12" Follow Rest
       
       
      Looking for acme thread ?   Try
       
                    http://www.roton.com/Mating_Components.aspx?family=7059609
       
      G’Day
      John
       
      From: atlas_craftsman@yahoogroups.com [mailto:atlas_craftsman@yahoogroups.com] On Behalf Of David Hair
      Sent: Saturday, September 21, 2013 7:10 AM
      To: atlas_craftsman@yahoogroups.com
      Subject: Re: [atlas_craftsman] Craftsman Atlas 12" Follow Rest
       
       
      
      No one has 16 TPI acme screw. If you can find a sorce I would be very interested.
       
      D.Hair
      ----- Original Message -----
      Sent: Friday, September 20, 2013 9:51 PM
      Subject: Re: [atlas_craftsman] Craftsman Atlas 12" Follow Rest
       
      David
      I recommend you buy the lead screw from McMaster It would be much easier on you. The screw would also be more accurate then what you could make
       
      GP
       
      From: David Hair <thehairs@...>
      To: atlas_craftsman@yahoogroups.com
      Sent: Friday, September 20, 2013 7:11 PM
      Subject: Re: [atlas_craftsman] Craftsman Atlas 12" Follow Rest
       
      
      I'm wanting to turn approx. 30" lead screws for a Craftsman 109 lathe.
       
      D.Hair
      ----- Original Message -----
      From: Doc
      Sent: Friday, September 20, 2013 6:57 PM
      Subject: Re: [atlas_craftsman] Craftsman Atlas 12" Follow Rest
       
      just screw  them   on the end  of 3/8 square  bars for  larger  atlas / crftsmn
       
      BUT  FWIW .....i have tried  wood, brass &  roller  bearings using  STEADY  REST , not  traveling  stdy , on finsihed /blued  gun  barrels ....the roller  bearings  did the  most damge as  far as repolishing  /refinishing ...,.they BURNISHED  so that more  work  was  required .....for a  blued  surface   none of  the  above  was  adequate .....i  ended  up w/ split  steel bushing  clamps w/ paper  under  on the  barrel.&  ORIGINAL  brass  fingers ......do not  know  what  you  are  into &  the  above  may  not  be  relevant ... ...just  thot  i may  save  you  some  misery
       best  wishes
      doc.......
      haw they had included the roller bearings
      -----Original Message-----From: David Hair <thehairs@...>To: atlas_craftsman <atlas_craftsman@yahoogroups.com>Sent: Fri, Sep 20, 2013 4:13 pmSubject: Re: [atlas_craftsman] Craftsman Atlas 12" Follow Rest
       
      
      Thanks GP, I already had that one marked in my ebay and another just like it that has already gone off auction. The one I saw on some group had a bit dirrerent design that included roller bearings. I can measure my lathe and make one from that, but just wanted another look at haw they had included the roller bearings.
       
      D.Hair
      ----- Original Message -----
      Sent: Friday, September 20, 2013 7:40 AM
      Subject: Re: [atlas_craftsman] Craftsman Atlas 12" Follow Rest
       
      David
      Here is one on e-bay
      http://www.ebay.com/itm/Craftsman-Atlas-12-Follow-Rest-Part-L4-396-/231056587367?pt=LH_DefaultDomain_0&hash=item35cc0bba67
       
      GP
       
      From: "thehairs@..." <thehairs@...>
      To: atlas_craftsman@yahoogroups.com
      Sent: Thursday, September 19, 2013 11:50 AM
      Subject: [atlas_craftsman] Craftsman Atlas 12" Follow Rest
       
      Somewhere on this group before NEO I am almost sure there was a file for a shop made Follow rest for the 12" craftsman lathe. If anyone knows where this file is or has a copy you would email please help.
       
      David Hair
      No virus found in this message.Checked by AVG - http://www.avg.com/Version: 2013.0.3408 / Virus Database: 3222/6684 - Release Date: 09/20/13
      No virus found in this message.
      Checked by AVG - http://www.avg.com/
      Version: 2013.0.3408 / Virus Database: 3222/6686 - Release Date: 09/20/13
      No virus found in this message.
      Checked by AVG - http://www.avg.com/
      Version: 2013.0.3408 / Virus Database: 3222/6686 - Release Date: 09/20/13
    • jerry Herrera
      Since we are on a topic of follow rest. Can anybody tell me if this goes to a Atlas. Seen it at a swapmeet. I have a 12x36 and didnt know if it would work.
      Message 2 of 19 , Sep 23, 2013
      Since we are on a topic of follow rest. Can anybody tell me if this goes to a Atlas. Seen it at a swapmeet. I have a 12x36 and didnt know if it would work.



      ------------------------------
      On Fri, Sep 20, 2013 6:51 PM PDT Guenther Paul wrote:

      >David
      >I recommend you buy the lead screw from McMaster It would be much easier on you. The screw would also be more accurate then what you could make
      >
      >GP

      >
      >________________________________
      > From: David Hair <thehairs@...>
      >To: atlas_craftsman@yahoogroups.com
      >Sent: Friday, September 20, 2013 7:11 PM
      >Subject: Re: [atlas_craftsman] Craftsman Atlas 12" Follow Rest
      >
      >
      >

      >
      >
      >I'm wanting to turn
      >approx. 30" lead screws for a Craftsman 109 lathe.

      >D.Hair
      >----- Original Message -----
      >From: Doc
      >To: atlas_craftsman@yahoogroups.com
      >Sent: Friday, September 20, 2013 6:57 PM
      >Subject: Re: [atlas_craftsman] Craftsman Atlas 12" Follow Rest
      >
      >just screw  them   on the end  of 3/8 square  bars for  larger  atlas / crftsmn
      >
      >BUT  FWIW .....i have tried  wood, brass &  roller  bearings using  STEADY  REST , not  traveling  stdy , on finsihed /blued  gun  barrels ....the roller  bearings  did the  most damge as  far as repolishing  /refinishing ...,.they BURNISHED  so that more  work  was  required .....for a  blued  surface   none of  the  above  was  adequate .....i  ended  up w/ split  steel bushing  clamps w/ paper  under  on the  barrel.&  ORIGINAL  brass  fingers ......do not  know  what  you  are  into &  the  above  may  not  be  relevant ... ...just  thot  i may  save  you  some  misery
      > best  wishes
      >doc.......
      >haw they had included the roller bearings
      >-----Original Message-----From: David Hair <thehairs@...>To: atlas_craftsman <atlas_craftsman@yahoogroups.com>Sent: Fri, Sep 20, 2013 4:13 pmSubject: Re: [atlas_craftsman] Craftsman Atlas 12" Follow Rest

      >
      >Thanks GP, I already had that one marked in my ebay and another just like it that has already gone off auction. The one I saw on some group had a bit dirrerent design that included roller bearings. I can measure my lathe and make one from that, but just wanted another look at haw they had included the roller bearings.

      >D.Hair
      >----- Original Message -----
      >From: Guenther Paul
      >To: atlas_craftsman@yahoogroups.com
      >Sent: Friday, September 20, 2013 7:40 AM
      >Subject: Re: [atlas_craftsman] Craftsman Atlas 12" Follow Rest
      >
      >
      >David
      >Here is one on e-bay
      >http://www.ebay.com/itm/Craftsman-Atlas-12-Follow-Rest-Part-L4-396-/231056587367?pt=LH_DefaultDomain_0&hash=item35cc0bba67
      >
      >GP
      >
      >
      >
      >________________________________
      >From: "thehairs@..." <thehairs@...>
      >To: atlas_craftsman@yahoogroups.com
      >Sent: Thursday, September 19, 2013 11:50 AM
      >Subject: [atlas_craftsman] Craftsman Atlas 12" Follow Rest
      >

      >Somewhere on this group before NEO I am almost sure there was a file for a shop made Follow rest for the 12" craftsman lathe. If anyone knows where this file is or has a copy you would email please help.
      >
      >David Hair
      >No virus found in this message.Checked by AVG - http://www.avg.com/Version: 2013.0.3408 / Virus Database: 3222/6684 - Release Date: 09/20/13
      >No virus found in this message.
      >Checked by AVG - http://www.avg.com/
      >Version: 2013.0.3408 / Virus
      > Database: 3222/6686 - Release Date:
      >09/20/13
      >
    • jerry Herrera
      I didnt buy it cause I wasnt sure. But I saw it at a swapmeet here in LB Ca. The guy has had it for awhile.
      Message 3 of 19 , Sep 23, 2013
        I didnt buy it cause I wasnt sure. But I saw it at a swapmeet here in LB Ca. The guy has had it for awhile.



        ------------------------------
        On Mon, Sep 23, 2013 8:36 AM PDT thehairs@... wrote:

        >

        >If I'm not mistaken that is for a southbend. If you would like your money back I would love to help you out.

        >David Hair  
        >--- In atlas_craftsman@yahoogroups.com, <atlas_craftsman@yahoogroups.com> wrote:
        >Jerry, Short answer is no. I've seen follow and/or stead rests with a base like this but can't recall what all they might fit.  But the Atlas steady rests all have a dovetail base that fits the cross slide dovetail on the carriage (you have to remove the cover to mount them). Robert D. In a message dated 09/23/2013 09:46:01 AM Central Daylight Time, jerster1959@... writes:
      Your message has been successfully submitted and would be delivered to recipients shortly.