Loading ...
Sorry, an error occurred while loading the content.

[atlas_craftsman] New lathe parts for 6"

Expand Messages
  • help@4mtool.com
    Here is a list of 6 Atlas items available directly. We are a machine shop and manufacturing facility, and manufacture items such as these, as well as other
    Message 1 of 3 , Feb 25, 2003
    • 0 Attachment
      Here is a list of 6" Atlas items available directly.
      We are a machine shop and manufacturing facility, and
      manufacture items such as these, as well as other items
      we make (sheet metalbbrakes and accessories for cutoff
      bandsaws).
      Currently the price for the blocks (and picture links)
      are:

      6" Atlas:
      Turning block with (2 or 4) 3/8" slots =$36.00 (#4M6T38)
      Turning block w/ 10mm slots (2 or 4) =$36.00 (#4M6T39)
      http://members.dialmaine.com/perocon/web/turna.jpg
      http://members.dialmaine.com/perocon/web/turnb.jpg
      http://members.dialmaine.com/perocon/web/turnc.jpg
      We have carbide tipped bits available, cutting towards
      the
      headstock ("AR" type) or threading ("E" type) available
      for $3.00 each, 3/8"
      square shank.
      We can and have supplied these blocks for 1/2" tooling,
      but our experience
      is that
      3/8" works better.

      Boring Block for 1/2", 3/8" & 5/16" bars =$35.00
      (#4M6B50)
      http://members.dialmaine.com/perocon/web/borea.JPG
      http://members.dialmaine.com/perocon/web/boreb.JPG

      Indexing 4 Way toolpost. 16 position indexing turret
      tool post for this
      small sized lathe.=$105 (#4M6I38)
      http://members.dialmaine.com/perocon/web/indexa.jpg
      http://members.dialmaine.com/perocon/web/indexb.jpg
      http://members.dialmaine.com/perocon/web/indexc.jpg

      Radiusing fixture uses 1/4" bits. =$130 (#4M6R25)
      The one in the picture is on one of our Atlases,
      Showing ball and cavity work, as well as side turning
      of a radius.
      It replaces your compound with a ground 4340 tool steel
      base, and is capable
      of turning male radii to 1", and even larger female
      diameters.
      The tool bits it uses are standard 1/4" bits turning.
      http://members.dialmaine.com/perocon/web/rada.jpg
      http://members.dialmaine.com/perocon/web/rad1.jpg
      http://members.dialmaine.com/perocon/web/rad2.jpg
      http://members.dialmaine.com/perocon/web/rad3.jpg

      1"-10 threaded Backplate blank- =$36 (#4M6BP210)
      This is face ground tool steel, which is 3" diameter,
      and threaded for the spindle nose. There is a chamfer
      on the headstock side for the
      indexing
      pin. Just what you need for that plain backed chuck or
      special driving
      need. It can be drilled tapped or milled to suit your
      needs. We do upon
      request
      offer 1"-8 (#4M6BP218) ones as well ($36)-
      Also 4" Diameter plates are available (#4M6BP310) at
      $40.
      http://members.dialmaine.com/perocon/web/bplate.jpg

      Shipping of the blocks via priority mail are $5.00
      each, the Radiusing
      fixture or the
      backplate are $7.25 each. We will give you costs on UPS
      or other shipping
      methods,
      as well as combined shipping costs.
      We soon will offer other items, including gears in
      brass and plastic(24dp)to
      mesh with your existing Zamak ones, tee slotted cross
      slide tables (another
      item no-one makes yet- this one was from a customer's
      suggestion), and other
      items in the design stages only (email your
      suggestions!)
      We also make similar blocks for SouthBend model "A"'s,
      Logan 11" ones,
      Craftsman 12", as well as some other models.

      Our website (www.4mtool.com) is only "Under
      construction" right now, but feel free to email us for
      any info more info.
      We also offer these items for auction on eBay.com (our
      user name is "forem")
      ,which often seem to show the pictures faster then the
      links below.


      Our # in the daytime (EST) is 1-800-603-0323- but as
      we do commercial work
      here as well, I am not always available to talk,
      although I will return
      calls and emails.

      Our Address is:
      4M Tool
      1044 Riverside Drive
      Vassalboro Me 04989-4119

      Money orders, personal or business check are fine for
      purchases. I can also
      now
      take credit cards via paypal.com (see data below)

      Regards,
      George O'Connor

      Info for credit cards on paypal:
      Please use george@... or forem@...
      for email and leave
      optional boxes blank.
      Link: www.paypal.com or
      https://secure.paypal.com/refer/pal=4mtool@...
    • k-q@webtv.net
      Majority of the links, do not work. Ken [Non-text portions of this message have been removed]
      Message 2 of 3 , Feb 26, 2003
      • 0 Attachment
        Majority of the links, do not work.

        Ken



        [Non-text portions of this message have been removed]
      • help@4mtool.com
        ... Thanks for bring this to my attention I didn t know that JPG in my new server was case sensitive! Here they are again (hopefully working!) rgeards,
        Message 3 of 3 , Mar 1, 2003
        • 0 Attachment
          On Wed, 26 Feb 2003, k-q@... wrote:

          >
          > Majority of the links, do not work.
          >
          > Ken

          Thanks for bring this to my attention I didn't know
          that "JPG" in my new server was case sensitive!
          Here they are again (hopefully working!)
          rgeards,
          George
          george@...

          Here is a list of 6" Atlas items available directly
          from us.
          We are a machine shop and manufacturing facility, and
          manufacture items such as these, as well as other items
          we make (sheet metal brakes and accessories for cutoff
          bandsaws).
          Currently the price for the blocks (and picture links)
          are:

          6" Atlas:
          Turning block with (2 or 4) 3/8" slots =$36.00 (#4M6T38)
          Turning block w/ 10mm slots (2 or 4) =$36.00 (#4M6T39)
          http://members.dialmaine.com/perocon/web/turna.JPG
          http://members.dialmaine.com/perocon/web/turnb.JPG
          http://members.dialmaine.com/perocon/web/turnc.JPG
          We have carbide tipped bits available, cutting towards
          the
          headstock ("AR" type) or threading ("E" type) available
          for $3.00 each, 3/8"
          square shank.
          We can and have supplied these blocks for 1/2" tooling,
          but our experience
          is that
          3/8" works better.

          Boring Block for 1/2", 3/8" & 5/16" bars =$35.00
          (#4M6B50)
          http://members.dialmaine.com/perocon/web/borea.JPG
          http://members.dialmaine.com/perocon/web/boreb.JPG

          Indexing 4 Way toolpost. 16 position indexing turret
          tool post for this
          small sized lathe.=$105 (#4M6I38)
          http://members.dialmaine.com/perocon/web/indexa.JPG
          http://members.dialmaine.com/perocon/web/indexb.JPG
          http://members.dialmaine.com/perocon/web/indexc.JPG

          Radiusing fixture uses 1/4" bits. =$130 (#4M6R25)
          The one in the picture is on one of our Atlases,
          Showing ball and cavity work, as well as side turning
          of a radius.
          It replaces your compound with a ground 4340 tool steel
          base, and is capable
          of turning male radii to 1", and even larger female
          diameters.
          The tool bits it uses are standard 1/4" bits turning.
          http://members.dialmaine.com/perocon/web/rada.JPG
          http://members.dialmaine.com/perocon/web/rad2.JPG
          http://members.dialmaine.com/perocon/web/rad3.JPG

          1"-10 threaded Backplate blank- =$36 (#4M6BP210)
          This is face ground tool steel, which is 3" diameter,
          and threaded for the spindle nose. There is a chamfer
          on the headstock side for the
          indexing
          pin. Just what you need for that plain backed chuck or
          special driving
          need. It can be drilled tapped or milled to suit your
          needs. We do upon
          request
          offer 1"-8 (#4M6BP218) ones as well ($36)-
          Also 4" Diameter plates are available (#4M6BP310) at
          $40.
          http://members.dialmaine.com/perocon/web/bplate.JPG

          Shipping of the blocks via priority mail are $5.00
          each, the Radiusing
          fixture or the
          backplate are $7.25 each. We will give you costs on UPS
          or other shipping
          methods,
          as well as combined shipping costs.
          We soon will offer other items, including gears in
          brass and plastic(24dp)to
          mesh with your existing Zamak ones, tee slotted cross
          slide tables (another
          item no-one makes yet- this one was from a customer's
          suggestion), and other
          items in the design stages only (email your
          suggestions!)
          We also make similar blocks for SouthBend model "A"'s,
          Logan 11" ones,
          Craftsman 12", as well as some other models.

          Our website (www.4mtool.com) is only "Under
          construction" right now, but feel free to email us for
          any info more info.
          We also offer these items for auction on eBay.com (our
          user name is "forem")
          ,which often seem to show the pictures faster then the
          links below.


          Our # in the daytime (EST) is 1-800-603-0323- but as
          we do commercial work
          here as well, I am not always available to talk,
          although I will return
          calls and emails.

          Our Address is:
          4M Tool
          1044 Riverside Drive
          Vassalboro Me 04989-4119

          Money orders, personal or business check are fine for
          purchases. I can also
          now
          take credit cards via paypal.com (see data below)

          Regards,
          George O'Connor

          Info for credit cards on paypal:
          Please use george@... or forem@...
          for email and leave
          optional boxes blank.
          Link: www.paypal.com or
          https://secure.paypal.com/refer/pal=4mtool@...
          >
          >
          > [Non-text portions of this message have been removed]
          >
          >
          > TO UNSUBSCRIBE FROM THE LIST:
          > You do this yourself by sending a message to:
          > atlas_craftsman-unsubscribe@yahoogroups.com
          >
          > Atlas-Craftsman Projects list is at
          > <a
          href="http://mail.4mtool.com/jump/http://groups.yahoo.com/group/atlas_craftsman_projects">http://groups.yahoo.com/group/atlas_craftsman_projects</a>/
          >
          > Your use of Yahoo! Groups is subject to
          > <a
          href="http://mail.4mtool.com/jump/http://docs.yahoo.com/info/terms">http://docs.yahoo.com/info/terms</a>/
        Your message has been successfully submitted and would be delivered to recipients shortly.