Loading ...
Sorry, an error occurred while loading the content.

21043Re: [atlas_craftsman] gear cutting attachment

Expand Messages
  • Bob Barker
    Nov 1, 2002
      Part number is BP-102. There is also an Atlas design for a boring bar, or
      rather a design for a varity of sizes ( 1" dia to 6" dia). It's number is
      BP-101. Good luck and let me know how it turns out.

      Bob Barker

      ----- Original Message -----
      From: "Randy Pedersen" <rpedersen1@...>
      To: <atlas_craftsman@yahoogroups.com>
      Sent: Friday, November 01, 2002 12:49 AM
      Subject: Re: [atlas_craftsman] gear cutting attachment


      > Bob:
      >
      > What is the part number for the drawings?
      >
      > Randy
      > ----- Original Message -----
      > From: "Bob Barker" <bobbarker@...>
      > To: <atlas_craftsman@yahoogroups.com>
      > Sent: Monday, October 28, 2002 10:40 AM
      > Subject: Re: [atlas_craftsman] gear cutting attachment
      >
      >
      > > The blue prints are still available from Clausing at $7.00 a copy. It is
      > > kinda neet to have a drawing made in 1939 and it is a blue print from
      the
      > > original velum drawing. Not to many companies left that have blue print
      > > machines, now it is CAD and photo copies.
      > >
      > > I am intrested in the Manual of Lathe Operations that you must have.
      > Mine
      > > is from the 1980's and doesn't mention these drawings. What 'edition'
      or
      > > year is your manual?
      > >
      > > Bob Barker
      > >
      > > ----- Original Message -----
      > > From: "atlas101a" <hdwla42@...>
      > > To: <atlas_craftsman@yahoogroups.com>
      > > Sent: Monday, October 28, 2002 4:26 AM
      > > Subject: [atlas_craftsman] gear cutting attachment
      > >
      > >
      > > > In Manual of Lathe Operation and Machinists Tables there is a gear
      > > > cutting attachment mentioned. For 50 cents you could order the
      > > > blueprints at ATLAS. Anybody in the possesion of this blue print? The
      > > > attachment is to be mounted on the vertical slide and uses the change
      > > > gears of the lathe itself. Would like to have a copy and make the
      > > > attachment if feasible. Thanks,
      > > > PJ
      >
      >
      > TO UNSUBSCRIBE FROM THE LIST:
      > You do this yourself by sending a message to:
      > atlas_craftsman-unsubscribe@yahoogroups.com
      >
      >
      >
      > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
      >
      >
    • Show all 5 messages in this topic