Loading ...
Sorry, an error occurred while loading the content.
 

First Psot ( ARM pt110 rev 0 (v4l) problem

Expand Messages
  • skiiy2003
    Hello all, I have a Digital multimedia receiver card (NMP-530 from Viewsonic) looks like Mediagate35 but with Sigma design EM8621L-LF The CPU info is:
    Message 1 of 2 , Jan 29, 2009
      Hello all,

      I have a Digital multimedia receiver card (NMP-530 from Viewsonic)
      looks like Mediagate35 but with Sigma design EM8621L-LF

      The CPU info is:

      Processor : ARM pt110 rev 0 (v4l)
      BogoMIPS : 80.69
      Hardware : JASPER
      Revision : 0000
      Serial : 0000000000000000

      and the dmesg is:

      Memory BAT mapping: BAT2=128Mb, BAT3=0Mb, residual: 0Mb
      Linux version 2.4.22 (alex@hadera) (gcc version 3.3.2) #1 Sun Sep 10
      08:58:17 ID
      T 2006
      USI:isa_io_base ioremap = a0000000
      PVR:CONFIG_ATC not defined
      On node 0 totalpages: 32768
      zone(0): 32768 pages.
      zone(1): 0 pages.
      zone(2): 0 pages.
      Kernel command line: root=/dev/mtdblock4 rw rootfstype=cramfs
      console=ttyS0,1152
      00
      Warning: real time clock seems stuck!
      Calibrating delay loop... 266.24 BogoMIPS
      Memory: 126952k available (1608k kernel code, 632k data, 72k init, 0k
      highmem)
      Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
      Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
      Mount cache hash table entries: 512 (order: 0, 4096 bytes)
      Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
      Page-cache hash table entries: 32768 (order: 5, 131072 bytes)


      POSIX conformance testing by UNIFIX
      PCI: Probing PCI hardware
      PCI:00:00.0 Resource 0 [00000000-0001ffff] is unassigned
      PCI:00:00.0 Resource 1 [00000000-1fffffff] is unassigned
      PCI: bridge rsrc 0..ffff (100), parent c01c0eb0
      PCI: bridge rsrc 80000000..8fffffff (200), parent c01c0ecc
      PCI:00:16.0: Resource 0: 8f000000-8fffffff (f=200)
      PCI:00:17.0: Resource 0: 8efff000-8effffff (f=200)
      PCI:00:17.1: Resource 0: 8effe000-8effefff (f=200)
      PCI:00:17.2: Resource 0: 8effdf00-8effdfff (f=200)
      Linux NET4.0 for Linux 2.4
      Based upon Swansea University Computer Society NET3.039
      Initializing RT netlink socket
      Starting kswapd
      JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
      i2c-core.o: i2c core module
      i2c-dev.o: i2c /dev entries driver module
      i2c-core.o: driver i2c-dev dummy driver registered.
      i2c-proc.o version 2.6.1 (20010825)
      CPM UART driver version 0.01
      ttyS0 at 0x8000 is a SCC
      ttyS1 at 0x8200 is a SCC
      pty: 256 Unix98 ptys configured
      eth0: FCC ENET Version 0.2, 02:d1:af:82:47:01
      RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
      loop: loaded (max 8 devices)
      PPP generic driver version 2.4.2
      PPP BSD Compression module registered
      SCSI subsystem driver Revision: 1.00
      kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
      kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
      MPC848PC flash device: 2000000 at fe000000
      chipreg.c will do drv-probe
      Found: SPANSION SP29LV256
      Flash Chip: Found 1 x16 devices at 0x0 in 8-bit mode
      number of JEDEC chips: 1
      cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
      do_map_probe,ret=c05fe260
      Using MPC8248PC partition definition
      Creating 7 MTD partitions on "Flash Chip":
      0x00000000-0x00040000 : "u-boot"
      0x00040000-0x00060000 : "u-boot env.var"
      0x00060000-0x001c0000 : "kernel"
      0x001c0000-0x00a80000 : "rootfs"
      0x00a80000-0x01480000 : "system1"
      0x01480000-0x01e80000 : "system2"
      0x01e80000-0x02000000 : "jffs #1"
      usb.c: registered new driver usbdevfs
      usb.c: registered new driver hub
      ehci_hcd 00:17.2: NEC Corporation USB 2.0
      ehci_hcd 00:17.2: irq 23, pci mem 8effdf00
      usb.c: new USB bus registered, assigned bus number 1
      ehci_hcd 00:17.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
      hub.c: USB hub found
      hub.c: 5 ports detected
      host/usb-ohci.c: USB OHCI at membase 0x8efff000, IRQ 23
      host/usb-ohci.c: usb-00:17.0, NEC Corporation USB
      usb.c: new USB bus registered, assigned bus number 2
      hub.c: USB hub found
      hub.c: 3 ports detected
      host/usb-ohci.c: USB OHCI at membase 0x8effe000, IRQ 23
      host/usb-ohci.c: usb-00:17.1, NEC Corporation USB (#2)
      usb.c: new USB bus registered, assigned bus number 3
      hub.c: USB hub found
      hub.c: 2 ports detected
      Initializing USB Mass Storage driver...
      usb.c: registered new driver usb-storage
      USB Mass Storage support registered.
      NET4: Linux TCP/IP 1.0 for NET4.0
      IP: routing cache hash table of 1024 buckets, 8Kbytes
      TCP: Hash tables configured (established 8192 bind 16384)
      NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
      VFS: Mounted root (cramfs filesystem).
      Freeing unused kernel memory: 72k init
      ir: devfs module not registered
      ir: driver loaded (wait_period = 100, buffer_size = 2)
      Unhandled interrupt 16, disabled
      GPIO_RST driver is opened
      IPFILTER: initialization starts...
      IPFILTER: Network driver set follow parameters:
      IPFILTER: Data length offset is 4
      IPFILTER: Buffered mode is ON

      IPFILTER: ipfilter_init_module - device registred to 254
      IPFILTER: Big buffers: 4, each can contain 64 ethernet packets
      IPFILTER: Maximal amount of simultaneously opened streams is 4
      IPFILTER: Total memory allocated: 409632 bytes for buffers (16 + 102404*4)
      IPFILTER: 24 bytes stream definitions
      Erase at 0x00160000 failed immediately: errno -22
      ir: Enable NEC decoder (0x00000000)


      Well i changed the file /dev/mtdblock6 to /dev/mtdblock4

      My card wont boot now the red light stay always on
      on normal boot the red lght is on for five sec.

      So i need your help

      Thanks.
    • skiiy2003
      ... 102404*4) ... Hi again, I m currently connected to card using JTAG approach but I m unable to stop the autoboot:. in Hyper terminal after: Hit any key to
      Message 2 of 2 , Jan 29, 2009
        --- In arm-user@yahoogroups.com, "skiiy2003" <skiiy2003@...> wrote:
        >
        > Hello all,
        >
        > I have a Digital multimedia receiver card (NMP-530 from Viewsonic)
        > looks like Mediagate35 but with Sigma design EM8621L-LF
        >
        > The CPU info is:
        >
        > Processor : ARM pt110 rev 0 (v4l)
        > BogoMIPS : 80.69
        > Hardware : JASPER
        > Revision : 0000
        > Serial : 0000000000000000
        >
        > and the dmesg is:
        >
        > Memory BAT mapping: BAT2=128Mb, BAT3=0Mb, residual: 0Mb
        > Linux version 2.4.22 (alex@hadera) (gcc version 3.3.2) #1 Sun Sep 10
        > 08:58:17 ID
        > T 2006
        > USI:isa_io_base ioremap = a0000000
        > PVR:CONFIG_ATC not defined
        > On node 0 totalpages: 32768
        > zone(0): 32768 pages.
        > zone(1): 0 pages.
        > zone(2): 0 pages.
        > Kernel command line: root=/dev/mtdblock4 rw rootfstype=cramfs
        > console=ttyS0,1152
        > 00
        > Warning: real time clock seems stuck!
        > Calibrating delay loop... 266.24 BogoMIPS
        > Memory: 126952k available (1608k kernel code, 632k data, 72k init, 0k
        > highmem)
        > Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
        > Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
        > Mount cache hash table entries: 512 (order: 0, 4096 bytes)
        > Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
        > Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
        >
        >
        > POSIX conformance testing by UNIFIX
        > PCI: Probing PCI hardware
        > PCI:00:00.0 Resource 0 [00000000-0001ffff] is unassigned
        > PCI:00:00.0 Resource 1 [00000000-1fffffff] is unassigned
        > PCI: bridge rsrc 0..ffff (100), parent c01c0eb0
        > PCI: bridge rsrc 80000000..8fffffff (200), parent c01c0ecc
        > PCI:00:16.0: Resource 0: 8f000000-8fffffff (f=200)
        > PCI:00:17.0: Resource 0: 8efff000-8effffff (f=200)
        > PCI:00:17.1: Resource 0: 8effe000-8effefff (f=200)
        > PCI:00:17.2: Resource 0: 8effdf00-8effdfff (f=200)
        > Linux NET4.0 for Linux 2.4
        > Based upon Swansea University Computer Society NET3.039
        > Initializing RT netlink socket
        > Starting kswapd
        > JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
        > i2c-core.o: i2c core module
        > i2c-dev.o: i2c /dev entries driver module
        > i2c-core.o: driver i2c-dev dummy driver registered.
        > i2c-proc.o version 2.6.1 (20010825)
        > CPM UART driver version 0.01
        > ttyS0 at 0x8000 is a SCC
        > ttyS1 at 0x8200 is a SCC
        > pty: 256 Unix98 ptys configured
        > eth0: FCC ENET Version 0.2, 02:d1:af:82:47:01
        > RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
        > loop: loaded (max 8 devices)
        > PPP generic driver version 2.4.2
        > PPP BSD Compression module registered
        > SCSI subsystem driver Revision: 1.00
        > kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
        > kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
        > MPC848PC flash device: 2000000 at fe000000
        > chipreg.c will do drv-probe
        > Found: SPANSION SP29LV256
        > Flash Chip: Found 1 x16 devices at 0x0 in 8-bit mode
        > number of JEDEC chips: 1
        > cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
        > do_map_probe,ret=c05fe260
        > Using MPC8248PC partition definition
        > Creating 7 MTD partitions on "Flash Chip":
        > 0x00000000-0x00040000 : "u-boot"
        > 0x00040000-0x00060000 : "u-boot env.var"
        > 0x00060000-0x001c0000 : "kernel"
        > 0x001c0000-0x00a80000 : "rootfs"
        > 0x00a80000-0x01480000 : "system1"
        > 0x01480000-0x01e80000 : "system2"
        > 0x01e80000-0x02000000 : "jffs #1"
        > usb.c: registered new driver usbdevfs
        > usb.c: registered new driver hub
        > ehci_hcd 00:17.2: NEC Corporation USB 2.0
        > ehci_hcd 00:17.2: irq 23, pci mem 8effdf00
        > usb.c: new USB bus registered, assigned bus number 1
        > ehci_hcd 00:17.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
        > hub.c: USB hub found
        > hub.c: 5 ports detected
        > host/usb-ohci.c: USB OHCI at membase 0x8efff000, IRQ 23
        > host/usb-ohci.c: usb-00:17.0, NEC Corporation USB
        > usb.c: new USB bus registered, assigned bus number 2
        > hub.c: USB hub found
        > hub.c: 3 ports detected
        > host/usb-ohci.c: USB OHCI at membase 0x8effe000, IRQ 23
        > host/usb-ohci.c: usb-00:17.1, NEC Corporation USB (#2)
        > usb.c: new USB bus registered, assigned bus number 3
        > hub.c: USB hub found
        > hub.c: 2 ports detected
        > Initializing USB Mass Storage driver...
        > usb.c: registered new driver usb-storage
        > USB Mass Storage support registered.
        > NET4: Linux TCP/IP 1.0 for NET4.0
        > IP: routing cache hash table of 1024 buckets, 8Kbytes
        > TCP: Hash tables configured (established 8192 bind 16384)
        > NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
        > VFS: Mounted root (cramfs filesystem).
        > Freeing unused kernel memory: 72k init
        > ir: devfs module not registered
        > ir: driver loaded (wait_period = 100, buffer_size = 2)
        > Unhandled interrupt 16, disabled
        > GPIO_RST driver is opened
        > IPFILTER: initialization starts...
        > IPFILTER: Network driver set follow parameters:
        > IPFILTER: Data length offset is 4
        > IPFILTER: Buffered mode is ON
        >
        > IPFILTER: ipfilter_init_module - device registred to 254
        > IPFILTER: Big buffers: 4, each can contain 64 ethernet packets
        > IPFILTER: Maximal amount of simultaneously opened streams is 4
        > IPFILTER: Total memory allocated: 409632 bytes for buffers (16 +
        102404*4)
        > IPFILTER: 24 bytes stream definitions
        > Erase at 0x00160000 failed immediately: errno -22
        > ir: Enable NEC decoder (0x00000000)
        >
        >
        > Well i changed the file /dev/mtdblock6 to /dev/mtdblock4
        >
        > My card wont boot now the red light stay always on
        > on normal boot the red lght is on for five sec.
        >
        > So i need your help
        >
        > Thanks.
        >


        Hi again,

        I'm currently connected to card using JTAG approach but I'm unable to
        stop the autoboot:.

        in Hyper terminal after:

        Hit any key to stop autoboot: 2...1...0
        ## Booting image at fe060000 ...
        Image Name: Linux-2.4.22
        Image Type: PowerPC Linux Kernel Image (gzip compressed)

        Thanks for your help.

        Best Regards.
      Your message has been successfully submitted and would be delivered to recipients shortly.