Loading ...
Sorry, an error occurred while loading the content.
 

Combat Cones

Expand Messages
  • loohon
    Advance warning for crafters who have been working with The Committee: Soon i will be posting info on how to make cone units that are superior remote weapons.
    Message 1 of 18 , Sep 3, 2011
      Advance warning for crafters who have been working with The Committee:
      Soon i will be posting info on how to make cone units that are superior remote weapons. There is no one way to make these. But there will be some guidelines to help you along.

      If you are able to, please acquire some of these excellent molds:
      http://www.southernstates.com/catalog/p-5004-little-giant-poultry-feeder-cover-22lb.aspx
      Little Giant Poultry Feeder Cover 22lb
      SKU: 10030801
      I bought one at a feed store for 2.79
      Will get more next time.

      Otherwise, find or make some other large cone molds that are of a very shallow slope like this one or close to it.
      If that's not feasible, get a big red 2-qt funnel of the type sold in stores all over the US for around $1. But don't go with a steeper mold than that.
      http://www.digitalfrontiersuf.com/wp-content/images/red-funnel.jpg

      Also some preferably smallish jasper and green aventurine, like at least 1/2 pound of each, tumbled or rough for each cone.

      OR the same pgms can go into generous quantities of aluminum shavings. So if you have that, you don't need the rox.

      Also some small cheap magnets. Most any will do, but ideally, i recommend these Precision Craft:
      http://www.hardwareandtools.com/Stanley-Hardware-N302-372-PrecisionCraft-by-Stanley-National-Assorted-Flexible-Shape-Magnets-Pack-Of-30-038613302372.html
      I just paid 7.99 for these in a blister pack in the hardware store, and here they are selling them for 2.97!
      Also there are, in similar blister packs, SKU N302-240 (which does not google well) and contains 6 ring magnets, as well as SKU N302-265, 8 discs. I recommend getting them all if they are handy at your local hardware store.

      Also some of the pink goo i mentioned here
      http://loohan.com/otb38.htm
    • loohon
      Feels like someone in Europe already made a nice crispy one. You may also need a cup or 2 of small, cheap quartz crystals/shards. Of course the S-B and VF
      Message 2 of 18 , Sep 4, 2011
        Feels like someone in Europe already made a nice crispy one.

        You may also need a cup or 2 of small, cheap quartz crystals/shards.
        Of course the S-B and VF mixes (and S-B can now be done with cocoa only; see http://loohan.com/otb33summary.htm )
        As well as the usual bric-a-brac if you have it. Maybe an occasional coil of some sort. But even with limited variety of ingredients one should be able to make something good.

        The key things seem to be
        -- as wide and shallow a cone as feasible
        -- lots of aluminum shavings, unless you have the jasper and aventurine. That's RED jasper, BTW.
        This is to hold the special pgms.

        This alone, with some cheap magnets and a bit of quartz, will probably make something pretty impressive.
        Aside from some VF and S-B layers, there may be clear resin layers and layers with other single substances like turmeric, sindhooram, or other powder mixes.

        The aluminum i'm using is in small chips that pack densely. I pour first, then sprinkle on the aluminum, and heap it up in the center.
        (If instead you put a bunch of dense shavings into the mold first, then pour, you will probably end up with unsightly air pockets on the surface of the cone.) I just did the last pour on such a unit that is mostly dense aluminum with a few small things inserted.

        You will probably be guided to put a lot of the rocks and other objects along the periphery and maybe the flat bottom of cone, and mainly aluminum (or resin in the case you use the red & green stones) in the center and top portions. This is unusual, but go with it.

        What sets these cones apart is the wider angle and the pgms that go into the aluminum (or jasper and aventurine).
        These weapons are enormously crispy and have already gone far to calm down a lot of evil attack energies. These are like Power Wands on steroids, using only cheap ingredients.

        These are the 2 first ones i made, that have the colored stones but very little aluminum.
        http://loohan.com/CombatCones.jpg
        The smaller one has maybe 1.5 cups of steel shavings, offset from center. If you use the colored stones insted of aluminum, and metal shavings used will likely be lopsidedly placed.



        --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@...> wrote:
        >
        > Advance warning for crafters who have been working with The Committee:
        > Soon i will be posting info on how to make cone units that are superior remote weapons. There is no one way to make these. But there will be some guidelines to help you along.
        >
        > If you are able to, please acquire some of these excellent molds:
        > http://www.southernstates.com/catalog/p-5004-little-giant-poultry-feeder-cover-22lb.aspx
        > Little Giant Poultry Feeder Cover 22lb
        > SKU: 10030801
        > I bought one at a feed store for 2.79
        > Will get more next time.
        >
        > Otherwise, find or make some other large cone molds that are of a very shallow slope like this one or close to it.
        > If that's not feasible, get a big red 2-qt funnel of the type sold in stores all over the US for around $1. But don't go with a steeper mold than that.
        > http://www.digitalfrontiersuf.com/wp-content/images/red-funnel.jpg
        >
        > Also some preferably smallish jasper and green aventurine, like at least 1/2 pound of each, tumbled or rough for each cone.
        >
        > OR the same pgms can go into generous quantities of aluminum shavings. So if you have that, you don't need the rox.
        >
        > Also some small cheap magnets. Most any will do, but ideally, i recommend these Precision Craft:
        > http://www.hardwareandtools.com/Stanley-Hardware-N302-372-PrecisionCraft-by-Stanley-National-Assorted-Flexible-Shape-Magnets-Pack-Of-30-038613302372.html
        > I just paid 7.99 for these in a blister pack in the hardware store, and here they are selling them for 2.97!
        > Also there are, in similar blister packs, SKU N302-240 (which does not google well) and contains 6 ring magnets, as well as SKU N302-265, 8 discs. I recommend getting them all if they are handy at your local hardware store.
        >
        > Also some of the pink goo i mentioned here
        > http://loohan.com/otb38.htm
        >
      • loohon
        Aluminum powder: It occurred to me today that this would be good to augment fluffy aluminum shavings or substitute for them entirely. I am most attracted to
        Message 3 of 18 , Sep 4, 2011
          Aluminum powder:
          It occurred to me today that this would be good to augment fluffy aluminum shavings or substitute for them entirely.
          I am most attracted to the 3000 mesh, which is more expensive.
          I just ordered 2#
          http://www.ebay.com/itm/2-lb-Aluminum-Powder-5-3000-Mesh-Super-Fine-/370468750296?pt=LH_DefaultDomain_0&hash=item5641a883d8
          He also has 1# and 5# lots.

          Vaguely, i think that 3oz might be enough to sub entirely for the shavings if one had none. That's in the recommended cone mold.
          Which seems a bit strange as i have been packing these 2 cones i've been working on with pounds of chips.
          Probably the fine powder would change the resin such that it would then take the aluminum programs itself.
          I suspect 3000 mesh is necessary to get the resin to work that way.

          BTW there are 3 distinct special pgms that go with these cones to make them so effective (but would not work in other shapes). 2 of these go into green aventurine, and the other goes into red jasper.
          Alternatively all 3 go into heaps of aluminum or, i'm getting, resin with this fine powder in it.

          Eventually i would like to work out a "standard recipe" that anyone could follow to make these things, even if they lacked intuitived sensitivity.
          With these weapons we can fry the nazis so hard...

          --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@...> wrote:
          >
          > Feels like someone in Europe already made a nice crispy one.
          >
          > You may also need a cup or 2 of small, cheap quartz crystals/shards.
          > Of course the S-B and VF mixes (and S-B can now be done with cocoa only; see http://loohan.com/otb33summary.htm )
          > As well as the usual bric-a-brac if you have it. Maybe an occasional coil of some sort. But even with limited variety of ingredients one should be able to make something good.
          >
          > The key things seem to be
          > -- as wide and shallow a cone as feasible
          > -- lots of aluminum shavings, unless you have the jasper and aventurine. That's RED jasper, BTW.
          > This is to hold the special pgms.
          >
          > This alone, with some cheap magnets and a bit of quartz, will probably make something pretty impressive.
          > Aside from some VF and S-B layers, there may be clear resin layers and layers with other single substances like turmeric, sindhooram, or other powder mixes.
          >
          > The aluminum i'm using is in small chips that pack densely. I pour first, then sprinkle on the aluminum, and heap it up in the center.
          > (If instead you put a bunch of dense shavings into the mold first, then pour, you will probably end up with unsightly air pockets on the surface of the cone.) I just did the last pour on such a unit that is mostly dense aluminum with a few small things inserted.
          >
          > You will probably be guided to put a lot of the rocks and other objects along the periphery and maybe the flat bottom of cone, and mainly aluminum (or resin in the case you use the red & green stones) in the center and top portions. This is unusual, but go with it.
          >
          > What sets these cones apart is the wider angle and the pgms that go into the aluminum (or jasper and aventurine).
          > These weapons are enormously crispy and have already gone far to calm down a lot of evil attack energies. These are like Power Wands on steroids, using only cheap ingredients.
          >
          > These are the 2 first ones i made, that have the colored stones but very little aluminum.
          > http://loohan.com/CombatCones.jpg
          > The smaller one has maybe 1.5 cups of steel shavings, offset from center. If you use the colored stones insted of aluminum, and metal shavings used will likely be lopsidedly placed.
          >
          >
          >
          > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
          > >
          > > Advance warning for crafters who have been working with The Committee:
          > > Soon i will be posting info on how to make cone units that are superior remote weapons. There is no one way to make these. But there will be some guidelines to help you along.
          > >
          > > If you are able to, please acquire some of these excellent molds:
          > > http://www.southernstates.com/catalog/p-5004-little-giant-poultry-feeder-cover-22lb.aspx
          > > Little Giant Poultry Feeder Cover 22lb
          > > SKU: 10030801
          > > I bought one at a feed store for 2.79
          > > Will get more next time.
          > >
          > > Otherwise, find or make some other large cone molds that are of a very shallow slope like this one or close to it.
          > > If that's not feasible, get a big red 2-qt funnel of the type sold in stores all over the US for around $1. But don't go with a steeper mold than that.
          > > http://www.digitalfrontiersuf.com/wp-content/images/red-funnel.jpg
          > >
          > > Also some preferably smallish jasper and green aventurine, like at least 1/2 pound of each, tumbled or rough for each cone.
          > >
          > > OR the same pgms can go into generous quantities of aluminum shavings. So if you have that, you don't need the rox.
          > >
          > > Also some small cheap magnets. Most any will do, but ideally, i recommend these Precision Craft:
          > > http://www.hardwareandtools.com/Stanley-Hardware-N302-372-PrecisionCraft-by-Stanley-National-Assorted-Flexible-Shape-Magnets-Pack-Of-30-038613302372.html
          > > I just paid 7.99 for these in a blister pack in the hardware store, and here they are selling them for 2.97!
          > > Also there are, in similar blister packs, SKU N302-240 (which does not google well) and contains 6 ring magnets, as well as SKU N302-265, 8 discs. I recommend getting them all if they are handy at your local hardware store.
          > >
          > > Also some of the pink goo i mentioned here
          > > http://loohan.com/otb38.htm
          > >
          >
        • loohon
          CombatConeAluminum1.jpg
          Message 4 of 18 , Sep 4, 2011
            CombatConeAluminum1.jpg

            --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@...> wrote:
            >
            > Aluminum powder:
            > It occurred to me today that this would be good to augment fluffy aluminum shavings or substitute for them entirely.
            > I am most attracted to the 3000 mesh, which is more expensive.
            > I just ordered 2#
            > http://www.ebay.com/itm/2-lb-Aluminum-Powder-5-3000-Mesh-Super-Fine-/370468750296?pt=LH_DefaultDomain_0&hash=item5641a883d8
            > He also has 1# and 5# lots.
            >
            > Vaguely, i think that 3oz might be enough to sub entirely for the shavings if one had none. That's in the recommended cone mold.
            > Which seems a bit strange as i have been packing these 2 cones i've been working on with pounds of chips.
            > Probably the fine powder would change the resin such that it would then take the aluminum programs itself.
            > I suspect 3000 mesh is necessary to get the resin to work that way.
            >
            > BTW there are 3 distinct special pgms that go with these cones to make them so effective (but would not work in other shapes). 2 of these go into green aventurine, and the other goes into red jasper.
            > Alternatively all 3 go into heaps of aluminum or, i'm getting, resin with this fine powder in it.
            >
            > Eventually i would like to work out a "standard recipe" that anyone could follow to make these things, even if they lacked intuitived sensitivity.
            > With these weapons we can fry the nazis so hard...
            >
            > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
            > >
            > > Feels like someone in Europe already made a nice crispy one.
            > >
            > > You may also need a cup or 2 of small, cheap quartz crystals/shards.
            > > Of course the S-B and VF mixes (and S-B can now be done with cocoa only; see http://loohan.com/otb33summary.htm )
            > > As well as the usual bric-a-brac if you have it. Maybe an occasional coil of some sort. But even with limited variety of ingredients one should be able to make something good.
            > >
            > > The key things seem to be
            > > -- as wide and shallow a cone as feasible
            > > -- lots of aluminum shavings, unless you have the jasper and aventurine. That's RED jasper, BTW.
            > > This is to hold the special pgms.
            > >
            > > This alone, with some cheap magnets and a bit of quartz, will probably make something pretty impressive.
            > > Aside from some VF and S-B layers, there may be clear resin layers and layers with other single substances like turmeric, sindhooram, or other powder mixes.
            > >
            > > The aluminum i'm using is in small chips that pack densely. I pour first, then sprinkle on the aluminum, and heap it up in the center.
            > > (If instead you put a bunch of dense shavings into the mold first, then pour, you will probably end up with unsightly air pockets on the surface of the cone.) I just did the last pour on such a unit that is mostly dense aluminum with a few small things inserted.
            > >
            > > You will probably be guided to put a lot of the rocks and other objects along the periphery and maybe the flat bottom of cone, and mainly aluminum (or resin in the case you use the red & green stones) in the center and top portions. This is unusual, but go with it.
            > >
            > > What sets these cones apart is the wider angle and the pgms that go into the aluminum (or jasper and aventurine).
            > > These weapons are enormously crispy and have already gone far to calm down a lot of evil attack energies. These are like Power Wands on steroids, using only cheap ingredients.
            > >
            > > These are the 2 first ones i made, that have the colored stones but very little aluminum.
            > > http://loohan.com/CombatCones.jpg
            > > The smaller one has maybe 1.5 cups of steel shavings, offset from center. If you use the colored stones insted of aluminum, and metal shavings used will likely be lopsidedly placed.
            > >
            > >
            > >
            > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
            > > >
            > > > Advance warning for crafters who have been working with The Committee:
            > > > Soon i will be posting info on how to make cone units that are superior remote weapons. There is no one way to make these. But there will be some guidelines to help you along.
            > > >
            > > > If you are able to, please acquire some of these excellent molds:
            > > > http://www.southernstates.com/catalog/p-5004-little-giant-poultry-feeder-cover-22lb.aspx
            > > > Little Giant Poultry Feeder Cover 22lb
            > > > SKU: 10030801
            > > > I bought one at a feed store for 2.79
            > > > Will get more next time.
            > > >
            > > > Otherwise, find or make some other large cone molds that are of a very shallow slope like this one or close to it.
            > > > If that's not feasible, get a big red 2-qt funnel of the type sold in stores all over the US for around $1. But don't go with a steeper mold than that.
            > > > http://www.digitalfrontiersuf.com/wp-content/images/red-funnel.jpg
            > > >
            > > > Also some preferably smallish jasper and green aventurine, like at least 1/2 pound of each, tumbled or rough for each cone.
            > > >
            > > > OR the same pgms can go into generous quantities of aluminum shavings. So if you have that, you don't need the rox.
            > > >
            > > > Also some small cheap magnets. Most any will do, but ideally, i recommend these Precision Craft:
            > > > http://www.hardwareandtools.com/Stanley-Hardware-N302-372-PrecisionCraft-by-Stanley-National-Assorted-Flexible-Shape-Magnets-Pack-Of-30-038613302372.html
            > > > I just paid 7.99 for these in a blister pack in the hardware store, and here they are selling them for 2.97!
            > > > Also there are, in similar blister packs, SKU N302-240 (which does not google well) and contains 6 ring magnets, as well as SKU N302-265, 8 discs. I recommend getting them all if they are handy at your local hardware store.
            > > >
            > > > Also some of the pink goo i mentioned here
            > > > http://loohan.com/otb38.htm
            > > >
            > >
            >
          • loohon
            Forgot to mention, that sexy pastel lavender stuff is cobalt carbonate i got from Bailey clay supplies like 2 years ago, and this is the first time The C had
            Message 5 of 18 , Sep 4, 2011
              Forgot to mention, that sexy pastel lavender stuff is cobalt carbonate i got from Bailey clay supplies like 2 years ago, and this is the first time The C had me open the bag.
              There is a pgm that is kind of good for these cones that goes into cobalt carbonate mixed into resin.
              Some resins might alter the color, i don't know.

              --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@...> wrote:
              >
              > CombatConeAluminum1.jpg
              >
              > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
              > >
              > > Aluminum powder:
              > > It occurred to me today that this would be good to augment fluffy aluminum shavings or substitute for them entirely.
              > > I am most attracted to the 3000 mesh, which is more expensive.
              > > I just ordered 2#
              > > http://www.ebay.com/itm/2-lb-Aluminum-Powder-5-3000-Mesh-Super-Fine-/370468750296?pt=LH_DefaultDomain_0&hash=item5641a883d8
              > > He also has 1# and 5# lots.
              > >
              > > Vaguely, i think that 3oz might be enough to sub entirely for the shavings if one had none. That's in the recommended cone mold.
              > > Which seems a bit strange as i have been packing these 2 cones i've been working on with pounds of chips.
              > > Probably the fine powder would change the resin such that it would then take the aluminum programs itself.
              > > I suspect 3000 mesh is necessary to get the resin to work that way.
              > >
              > > BTW there are 3 distinct special pgms that go with these cones to make them so effective (but would not work in other shapes). 2 of these go into green aventurine, and the other goes into red jasper.
              > > Alternatively all 3 go into heaps of aluminum or, i'm getting, resin with this fine powder in it.
              > >
              > > Eventually i would like to work out a "standard recipe" that anyone could follow to make these things, even if they lacked intuitived sensitivity.
              > > With these weapons we can fry the nazis so hard...
              > >
              > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
              > > >
              > > > Feels like someone in Europe already made a nice crispy one.
              > > >
              > > > You may also need a cup or 2 of small, cheap quartz crystals/shards.
              > > > Of course the S-B and VF mixes (and S-B can now be done with cocoa only; see http://loohan.com/otb33summary.htm )
              > > > As well as the usual bric-a-brac if you have it. Maybe an occasional coil of some sort. But even with limited variety of ingredients one should be able to make something good.
              > > >
              > > > The key things seem to be
              > > > -- as wide and shallow a cone as feasible
              > > > -- lots of aluminum shavings, unless you have the jasper and aventurine. That's RED jasper, BTW.
              > > > This is to hold the special pgms.
              > > >
              > > > This alone, with some cheap magnets and a bit of quartz, will probably make something pretty impressive.
              > > > Aside from some VF and S-B layers, there may be clear resin layers and layers with other single substances like turmeric, sindhooram, or other powder mixes.
              > > >
              > > > The aluminum i'm using is in small chips that pack densely. I pour first, then sprinkle on the aluminum, and heap it up in the center.
              > > > (If instead you put a bunch of dense shavings into the mold first, then pour, you will probably end up with unsightly air pockets on the surface of the cone.) I just did the last pour on such a unit that is mostly dense aluminum with a few small things inserted.
              > > >
              > > > You will probably be guided to put a lot of the rocks and other objects along the periphery and maybe the flat bottom of cone, and mainly aluminum (or resin in the case you use the red & green stones) in the center and top portions. This is unusual, but go with it.
              > > >
              > > > What sets these cones apart is the wider angle and the pgms that go into the aluminum (or jasper and aventurine).
              > > > These weapons are enormously crispy and have already gone far to calm down a lot of evil attack energies. These are like Power Wands on steroids, using only cheap ingredients.
              > > >
              > > > These are the 2 first ones i made, that have the colored stones but very little aluminum.
              > > > http://loohan.com/CombatCones.jpg
              > > > The smaller one has maybe 1.5 cups of steel shavings, offset from center. If you use the colored stones insted of aluminum, and metal shavings used will likely be lopsidedly placed.
              > > >
              > > >
              > > >
              > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
              > > > >
              > > > > Advance warning for crafters who have been working with The Committee:
              > > > > Soon i will be posting info on how to make cone units that are superior remote weapons. There is no one way to make these. But there will be some guidelines to help you along.
              > > > >
              > > > > If you are able to, please acquire some of these excellent molds:
              > > > > http://www.southernstates.com/catalog/p-5004-little-giant-poultry-feeder-cover-22lb.aspx
              > > > > Little Giant Poultry Feeder Cover 22lb
              > > > > SKU: 10030801
              > > > > I bought one at a feed store for 2.79
              > > > > Will get more next time.
              > > > >
              > > > > Otherwise, find or make some other large cone molds that are of a very shallow slope like this one or close to it.
              > > > > If that's not feasible, get a big red 2-qt funnel of the type sold in stores all over the US for around $1. But don't go with a steeper mold than that.
              > > > > http://www.digitalfrontiersuf.com/wp-content/images/red-funnel.jpg
              > > > >
              > > > > Also some preferably smallish jasper and green aventurine, like at least 1/2 pound of each, tumbled or rough for each cone.
              > > > >
              > > > > OR the same pgms can go into generous quantities of aluminum shavings. So if you have that, you don't need the rox.
              > > > >
              > > > > Also some small cheap magnets. Most any will do, but ideally, i recommend these Precision Craft:
              > > > > http://www.hardwareandtools.com/Stanley-Hardware-N302-372-PrecisionCraft-by-Stanley-National-Assorted-Flexible-Shape-Magnets-Pack-Of-30-038613302372.html
              > > > > I just paid 7.99 for these in a blister pack in the hardware store, and here they are selling them for 2.97!
              > > > > Also there are, in similar blister packs, SKU N302-240 (which does not google well) and contains 6 ring magnets, as well as SKU N302-265, 8 discs. I recommend getting them all if they are handy at your local hardware store.
              > > > >
              > > > > Also some of the pink goo i mentioned here
              > > > > http://loohan.com/otb38.htm
              > > > >
              > > >
              > >
              >
            • loohon
              http://loohan.com/CombatConeAluminum2.jpg My latest. Now i am working on a base for the 1st one i made of that shape with the big orange funnel mold. Often i
              Message 6 of 18 , Sep 6, 2011
                http://loohan.com/CombatConeAluminum2.jpg
                My latest.

                Now i am working on a base for the 1st one i made of that shape with the big orange funnel mold.
                Often i like to re-cast cones in disks.
                In this shape, i have been guided to use quite a bunch of capacitors. Luckily a friend had sent me bags full.
                Also i put in a few resistors of various strengths.
                The disk base i'm working on has dozens of capacitors too.

                I doubt i will make any more of these aluminum-heavy ones. I plan to make a bunch more cones when my aluminum powder gets here.
                Each one significantly suppresses the evil energies.

                I am a bit puzzled: it only takes a pound or so of the jasper/aventurine to make a cone, yet many pounds of aluminum shavings to replace these.
                Most of the programming in the shavings is a 4th pgm, which is also present to a lesser extent in the jasper/aventurine cones.
                Apparently this 4th pgm is necessary to make the aluminum units work well.
                However both types seem to be about just as good overall.


                --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@...> wrote:
                >
                > Forgot to mention, that sexy pastel lavender stuff is cobalt carbonate i got from Bailey clay supplies like 2 years ago, and this is the first time The C had me open the bag.
                > There is a pgm that is kind of good for these cones that goes into cobalt carbonate mixed into resin.
                > Some resins might alter the color, i don't know.
                >
                > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                > >
                > > CombatConeAluminum1.jpg
                > >
                > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                > > >
                > > > Aluminum powder:
                > > > It occurred to me today that this would be good to augment fluffy aluminum shavings or substitute for them entirely.
                > > > I am most attracted to the 3000 mesh, which is more expensive.
                > > > I just ordered 2#
                > > > http://www.ebay.com/itm/2-lb-Aluminum-Powder-5-3000-Mesh-Super-Fine-/370468750296?pt=LH_DefaultDomain_0&hash=item5641a883d8
                > > > He also has 1# and 5# lots.
                > > >
                > > > Vaguely, i think that 3oz might be enough to sub entirely for the shavings if one had none. That's in the recommended cone mold.
                > > > Which seems a bit strange as i have been packing these 2 cones i've been working on with pounds of chips.
                > > > Probably the fine powder would change the resin such that it would then take the aluminum programs itself.
                > > > I suspect 3000 mesh is necessary to get the resin to work that way.
                > > >
                > > > BTW there are 3 distinct special pgms that go with these cones to make them so effective (but would not work in other shapes). 2 of these go into green aventurine, and the other goes into red jasper.
                > > > Alternatively all 3 go into heaps of aluminum or, i'm getting, resin with this fine powder in it.
                > > >
                > > > Eventually i would like to work out a "standard recipe" that anyone could follow to make these things, even if they lacked intuitived sensitivity.
                > > > With these weapons we can fry the nazis so hard...
                > > >
                > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                > > > >
                > > > > Feels like someone in Europe already made a nice crispy one.
                > > > >
                > > > > You may also need a cup or 2 of small, cheap quartz crystals/shards.
                > > > > Of course the S-B and VF mixes (and S-B can now be done with cocoa only; see http://loohan.com/otb33summary.htm )
                > > > > As well as the usual bric-a-brac if you have it. Maybe an occasional coil of some sort. But even with limited variety of ingredients one should be able to make something good.
                > > > >
                > > > > The key things seem to be
                > > > > -- as wide and shallow a cone as feasible
                > > > > -- lots of aluminum shavings, unless you have the jasper and aventurine. That's RED jasper, BTW.
                > > > > This is to hold the special pgms.
                > > > >
                > > > > This alone, with some cheap magnets and a bit of quartz, will probably make something pretty impressive.
                > > > > Aside from some VF and S-B layers, there may be clear resin layers and layers with other single substances like turmeric, sindhooram, or other powder mixes.
                > > > >
                > > > > The aluminum i'm using is in small chips that pack densely. I pour first, then sprinkle on the aluminum, and heap it up in the center.
                > > > > (If instead you put a bunch of dense shavings into the mold first, then pour, you will probably end up with unsightly air pockets on the surface of the cone.) I just did the last pour on such a unit that is mostly dense aluminum with a few small things inserted.
                > > > >
                > > > > You will probably be guided to put a lot of the rocks and other objects along the periphery and maybe the flat bottom of cone, and mainly aluminum (or resin in the case you use the red & green stones) in the center and top portions. This is unusual, but go with it.
                > > > >
                > > > > What sets these cones apart is the wider angle and the pgms that go into the aluminum (or jasper and aventurine).
                > > > > These weapons are enormously crispy and have already gone far to calm down a lot of evil attack energies. These are like Power Wands on steroids, using only cheap ingredients.
                > > > >
                > > > > These are the 2 first ones i made, that have the colored stones but very little aluminum.
                > > > > http://loohan.com/CombatCones.jpg
                > > > > The smaller one has maybe 1.5 cups of steel shavings, offset from center. If you use the colored stones insted of aluminum, and metal shavings used will likely be lopsidedly placed.
                > > > >
                > > > >
                > > > >
                > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                > > > > >
                > > > > > Advance warning for crafters who have been working with The Committee:
                > > > > > Soon i will be posting info on how to make cone units that are superior remote weapons. There is no one way to make these. But there will be some guidelines to help you along.
                > > > > >
                > > > > > If you are able to, please acquire some of these excellent molds:
                > > > > > http://www.southernstates.com/catalog/p-5004-little-giant-poultry-feeder-cover-22lb.aspx
                > > > > > Little Giant Poultry Feeder Cover 22lb
                > > > > > SKU: 10030801
                > > > > > I bought one at a feed store for 2.79
                > > > > > Will get more next time.
                > > > > >
                > > > > > Otherwise, find or make some other large cone molds that are of a very shallow slope like this one or close to it.
                > > > > > If that's not feasible, get a big red 2-qt funnel of the type sold in stores all over the US for around $1. But don't go with a steeper mold than that.
                > > > > > http://www.digitalfrontiersuf.com/wp-content/images/red-funnel.jpg
                > > > > >
                > > > > > Also some preferably smallish jasper and green aventurine, like at least 1/2 pound of each, tumbled or rough for each cone.
                > > > > >
                > > > > > OR the same pgms can go into generous quantities of aluminum shavings. So if you have that, you don't need the rox.
                > > > > >
                > > > > > Also some small cheap magnets. Most any will do, but ideally, i recommend these Precision Craft:
                > > > > > http://www.hardwareandtools.com/Stanley-Hardware-N302-372-PrecisionCraft-by-Stanley-National-Assorted-Flexible-Shape-Magnets-Pack-Of-30-038613302372.html
                > > > > > I just paid 7.99 for these in a blister pack in the hardware store, and here they are selling them for 2.97!
                > > > > > Also there are, in similar blister packs, SKU N302-240 (which does not google well) and contains 6 ring magnets, as well as SKU N302-265, 8 discs. I recommend getting them all if they are handy at your local hardware store.
                > > > > >
                > > > > > Also some of the pink goo i mentioned here
                > > > > > http://loohan.com/otb38.htm
                > > > > >
                > > > >
                > > >
                > >
                >
              • loohon
                http://loohan.com/CombatConeDisk1.jpg Right now it is not yet fully programmed. Maybe someday i ll rub it with fine steel wool or something to get an aesthetic
                Message 7 of 18 , Sep 8, 2011
                  http://loohan.com/CombatConeDisk1.jpg
                  Right now it is not yet fully programmed.

                  Maybe someday i'll rub it with fine steel wool or something to get an aesthetic matte finish. Or maybe a coarse rubbing compound. The glossiness is a bit garish.

                  This massive disk is PACKED. Unlike much of my contemporary stuff, it is practically wall-to-wall rocks and metal in there. Heavy.

                  A few notes about the disk base:
                  --Very dense powder mixes for the most part. Almost 1# of turmeric powder in there, for instance. Some of it used straight, the rest mixed with other ingredients like fine silica. I made many unique powder mixes ad hoc for this.
                  --Lotsa capacitors as i already mentioned.
                  --Does contain some aluminum shaving with the same pgms as go into the aluminum cones.
                  --Also a couple dozen green aventurine tumbled stones that got the 2 special pgms that go into those. I.e. this base had a lot of programming that the base by itself could not use because the pgms require the broad cone shape to be effective.
                  --Some of those cheap magnets and some stainless steel screws. A few coils. Almost a whole tube of the Rose goo.

                  --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@...> wrote:
                  >
                  > http://loohan.com/CombatConeAluminum2.jpg
                  > My latest.
                  >
                  > Now i am working on a base for the 1st one i made of that shape with the big orange funnel mold.
                  > Often i like to re-cast cones in disks.
                  > In this shape, i have been guided to use quite a bunch of capacitors. Luckily a friend had sent me bags full.
                  > Also i put in a few resistors of various strengths.
                  > The disk base i'm working on has dozens of capacitors too.
                  >
                  > I doubt i will make any more of these aluminum-heavy ones. I plan to make a bunch more cones when my aluminum powder gets here.
                  > Each one significantly suppresses the evil energies.
                  >
                  > I am a bit puzzled: it only takes a pound or so of the jasper/aventurine to make a cone, yet many pounds of aluminum shavings to replace these.
                  > Most of the programming in the shavings is a 4th pgm, which is also present to a lesser extent in the jasper/aventurine cones.
                  > Apparently this 4th pgm is necessary to make the aluminum units work well.
                  > However both types seem to be about just as good overall.
                  >
                  >
                  > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                  > >
                  > > Forgot to mention, that sexy pastel lavender stuff is cobalt carbonate i got from Bailey clay supplies like 2 years ago, and this is the first time The C had me open the bag.
                  > > There is a pgm that is kind of good for these cones that goes into cobalt carbonate mixed into resin.
                  > > Some resins might alter the color, i don't know.
                  > >
                  > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                  > > >
                  > > > CombatConeAluminum1.jpg
                  > > >
                  > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                  > > > >
                  > > > > Aluminum powder:
                  > > > > It occurred to me today that this would be good to augment fluffy aluminum shavings or substitute for them entirely.
                  > > > > I am most attracted to the 3000 mesh, which is more expensive.
                  > > > > I just ordered 2#
                  > > > > http://www.ebay.com/itm/2-lb-Aluminum-Powder-5-3000-Mesh-Super-Fine-/370468750296?pt=LH_DefaultDomain_0&hash=item5641a883d8
                  > > > > He also has 1# and 5# lots.
                  > > > >
                  > > > > Vaguely, i think that 3oz might be enough to sub entirely for the shavings if one had none. That's in the recommended cone mold.
                  > > > > Which seems a bit strange as i have been packing these 2 cones i've been working on with pounds of chips.
                  > > > > Probably the fine powder would change the resin such that it would then take the aluminum programs itself.
                  > > > > I suspect 3000 mesh is necessary to get the resin to work that way.
                  > > > >
                  > > > > BTW there are 3 distinct special pgms that go with these cones to make them so effective (but would not work in other shapes). 2 of these go into green aventurine, and the other goes into red jasper.
                  > > > > Alternatively all 3 go into heaps of aluminum or, i'm getting, resin with this fine powder in it.
                  > > > >
                  > > > > Eventually i would like to work out a "standard recipe" that anyone could follow to make these things, even if they lacked intuitived sensitivity.
                  > > > > With these weapons we can fry the nazis so hard...
                  > > > >
                  > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                  > > > > >
                  > > > > > Feels like someone in Europe already made a nice crispy one.
                  > > > > >
                  > > > > > You may also need a cup or 2 of small, cheap quartz crystals/shards.
                  > > > > > Of course the S-B and VF mixes (and S-B can now be done with cocoa only; see http://loohan.com/otb33summary.htm )
                  > > > > > As well as the usual bric-a-brac if you have it. Maybe an occasional coil of some sort. But even with limited variety of ingredients one should be able to make something good.
                  > > > > >
                  > > > > > The key things seem to be
                  > > > > > -- as wide and shallow a cone as feasible
                  > > > > > -- lots of aluminum shavings, unless you have the jasper and aventurine. That's RED jasper, BTW.
                  > > > > > This is to hold the special pgms.
                  > > > > >
                  > > > > > This alone, with some cheap magnets and a bit of quartz, will probably make something pretty impressive.
                  > > > > > Aside from some VF and S-B layers, there may be clear resin layers and layers with other single substances like turmeric, sindhooram, or other powder mixes.
                  > > > > >
                  > > > > > The aluminum i'm using is in small chips that pack densely. I pour first, then sprinkle on the aluminum, and heap it up in the center.
                  > > > > > (If instead you put a bunch of dense shavings into the mold first, then pour, you will probably end up with unsightly air pockets on the surface of the cone.) I just did the last pour on such a unit that is mostly dense aluminum with a few small things inserted.
                  > > > > >
                  > > > > > You will probably be guided to put a lot of the rocks and other objects along the periphery and maybe the flat bottom of cone, and mainly aluminum (or resin in the case you use the red & green stones) in the center and top portions. This is unusual, but go with it.
                  > > > > >
                  > > > > > What sets these cones apart is the wider angle and the pgms that go into the aluminum (or jasper and aventurine).
                  > > > > > These weapons are enormously crispy and have already gone far to calm down a lot of evil attack energies. These are like Power Wands on steroids, using only cheap ingredients.
                  > > > > >
                  > > > > > These are the 2 first ones i made, that have the colored stones but very little aluminum.
                  > > > > > http://loohan.com/CombatCones.jpg
                  > > > > > The smaller one has maybe 1.5 cups of steel shavings, offset from center. If you use the colored stones insted of aluminum, and metal shavings used will likely be lopsidedly placed.
                  > > > > >
                  > > > > >
                  > > > > >
                  > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                  > > > > > >
                  > > > > > > Advance warning for crafters who have been working with The Committee:
                  > > > > > > Soon i will be posting info on how to make cone units that are superior remote weapons. There is no one way to make these. But there will be some guidelines to help you along.
                  > > > > > >
                  > > > > > > If you are able to, please acquire some of these excellent molds:
                  > > > > > > http://www.southernstates.com/catalog/p-5004-little-giant-poultry-feeder-cover-22lb.aspx
                  > > > > > > Little Giant Poultry Feeder Cover 22lb
                  > > > > > > SKU: 10030801
                  > > > > > > I bought one at a feed store for 2.79
                  > > > > > > Will get more next time.
                  > > > > > >
                  > > > > > > Otherwise, find or make some other large cone molds that are of a very shallow slope like this one or close to it.
                  > > > > > > If that's not feasible, get a big red 2-qt funnel of the type sold in stores all over the US for around $1. But don't go with a steeper mold than that.
                  > > > > > > http://www.digitalfrontiersuf.com/wp-content/images/red-funnel.jpg
                  > > > > > >
                  > > > > > > Also some preferably smallish jasper and green aventurine, like at least 1/2 pound of each, tumbled or rough for each cone.
                  > > > > > >
                  > > > > > > OR the same pgms can go into generous quantities of aluminum shavings. So if you have that, you don't need the rox.
                  > > > > > >
                  > > > > > > Also some small cheap magnets. Most any will do, but ideally, i recommend these Precision Craft:
                  > > > > > > http://www.hardwareandtools.com/Stanley-Hardware-N302-372-PrecisionCraft-by-Stanley-National-Assorted-Flexible-Shape-Magnets-Pack-Of-30-038613302372.html
                  > > > > > > I just paid 7.99 for these in a blister pack in the hardware store, and here they are selling them for 2.97!
                  > > > > > > Also there are, in similar blister packs, SKU N302-240 (which does not google well) and contains 6 ring magnets, as well as SKU N302-265, 8 discs. I recommend getting them all if they are handy at your local hardware store.
                  > > > > > >
                  > > > > > > Also some of the pink goo i mentioned here
                  > > > > > > http://loohan.com/otb38.htm
                  > > > > > >
                  > > > > >
                  > > > >
                  > > >
                  > >
                  >
                • loohon
                  Went back to the feed store but they only had 1 more of those cool feeder molds. Bought it. Also they have those big orange cones like in this pic.
                  Message 8 of 18 , Sep 8, 2011
                    Went back to the feed store but they only had 1 more of those cool feeder molds. Bought it. Also they have those big orange cones like in
                    this pic.
                    http://loohan.com/CombatCones.jpg
                    So i got another one. They are $6 but good quality for many uses. Proudly crafted in the Orient.

                    Also i have 2 of these funnels i had gotten at the feed store:
                    http://www.igetmore4less.com/images/CHIF0003.jpg
                    They can be found on a websearch of CHIF0003
                    I get these are good for Combat Cones too.

                    So now i started a batch of 6: 2 of each of these types of molds.

                    Also i got my aluminum powder today.
                    And they had me mix some into a larger amount of silica, and add a fair bit of the cobalt carbonate to this. I will be using this mix soon.
                    I suspect this is not the only way i will be mixing aluminum powder into these cones, but i do suspect the cobalt carbonate will always be mixed into the aluminum. Maybe not always silica.

                    Right now they have only had me pour straight cobalt carbonate in epoxy into the tips of these 6 cones.

                    Caution, TOXICITY: aluminum this fine is probably absorbed thru the skin. Hulda Clark claimed that one absorbs aluminum even just touching lawn chairs etc.
                    Also cobalt carbonate is toxic.
                    Always use caution, gloves, and a dust mask when handling such powders. Don't get into eyes.

                    --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@...> wrote:
                    >
                    > http://loohan.com/CombatConeDisk1.jpg
                    > Right now it is not yet fully programmed.
                    >
                    > Maybe someday i'll rub it with fine steel wool or something to get an aesthetic matte finish. Or maybe a coarse rubbing compound. The glossiness is a bit garish.
                    >
                    > This massive disk is PACKED. Unlike much of my contemporary stuff, it is practically wall-to-wall rocks and metal in there. Heavy.
                    >
                    > A few notes about the disk base:
                    > --Very dense powder mixes for the most part. Almost 1# of turmeric powder in there, for instance. Some of it used straight, the rest mixed with other ingredients like fine silica. I made many unique powder mixes ad hoc for this.
                    > --Lotsa capacitors as i already mentioned.
                    > --Does contain some aluminum shaving with the same pgms as go into the aluminum cones.
                    > --Also a couple dozen green aventurine tumbled stones that got the 2 special pgms that go into those. I.e. this base had a lot of programming that the base by itself could not use because the pgms require the broad cone shape to be effective.
                    > --Some of those cheap magnets and some stainless steel screws. A few coils. Almost a whole tube of the Rose goo.
                    >
                    > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                    > >
                    > > http://loohan.com/CombatConeAluminum2.jpg
                    > > My latest.
                    > >
                    > > Now i am working on a base for the 1st one i made of that shape with the big orange funnel mold.
                    > > Often i like to re-cast cones in disks.
                    > > In this shape, i have been guided to use quite a bunch of capacitors. Luckily a friend had sent me bags full.
                    > > Also i put in a few resistors of various strengths.
                    > > The disk base i'm working on has dozens of capacitors too.
                    > >
                    > > I doubt i will make any more of these aluminum-heavy ones. I plan to make a bunch more cones when my aluminum powder gets here.
                    > > Each one significantly suppresses the evil energies.
                    > >
                    > > I am a bit puzzled: it only takes a pound or so of the jasper/aventurine to make a cone, yet many pounds of aluminum shavings to replace these.
                    > > Most of the programming in the shavings is a 4th pgm, which is also present to a lesser extent in the jasper/aventurine cones.
                    > > Apparently this 4th pgm is necessary to make the aluminum units work well.
                    > > However both types seem to be about just as good overall.
                    > >
                    > >
                    > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                    > > >
                    > > > Forgot to mention, that sexy pastel lavender stuff is cobalt carbonate i got from Bailey clay supplies like 2 years ago, and this is the first time The C had me open the bag.
                    > > > There is a pgm that is kind of good for these cones that goes into cobalt carbonate mixed into resin.
                    > > > Some resins might alter the color, i don't know.
                    > > >
                    > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                    > > > >
                    > > > > CombatConeAluminum1.jpg
                    > > > >
                    > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                    > > > > >
                    > > > > > Aluminum powder:
                    > > > > > It occurred to me today that this would be good to augment fluffy aluminum shavings or substitute for them entirely.
                    > > > > > I am most attracted to the 3000 mesh, which is more expensive.
                    > > > > > I just ordered 2#
                    > > > > > http://www.ebay.com/itm/2-lb-Aluminum-Powder-5-3000-Mesh-Super-Fine-/370468750296?pt=LH_DefaultDomain_0&hash=item5641a883d8
                    > > > > > He also has 1# and 5# lots.
                    > > > > >
                    > > > > > Vaguely, i think that 3oz might be enough to sub entirely for the shavings if one had none. That's in the recommended cone mold.
                    > > > > > Which seems a bit strange as i have been packing these 2 cones i've been working on with pounds of chips.
                    > > > > > Probably the fine powder would change the resin such that it would then take the aluminum programs itself.
                    > > > > > I suspect 3000 mesh is necessary to get the resin to work that way.
                    > > > > >
                    > > > > > BTW there are 3 distinct special pgms that go with these cones to make them so effective (but would not work in other shapes). 2 of these go into green aventurine, and the other goes into red jasper.
                    > > > > > Alternatively all 3 go into heaps of aluminum or, i'm getting, resin with this fine powder in it.
                    > > > > >
                    > > > > > Eventually i would like to work out a "standard recipe" that anyone could follow to make these things, even if they lacked intuitived sensitivity.
                    > > > > > With these weapons we can fry the nazis so hard...
                    > > > > >
                    > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                    > > > > > >
                    > > > > > > Feels like someone in Europe already made a nice crispy one.
                    > > > > > >
                    > > > > > > You may also need a cup or 2 of small, cheap quartz crystals/shards.
                    > > > > > > Of course the S-B and VF mixes (and S-B can now be done with cocoa only; see http://loohan.com/otb33summary.htm )
                    > > > > > > As well as the usual bric-a-brac if you have it. Maybe an occasional coil of some sort. But even with limited variety of ingredients one should be able to make something good.
                    > > > > > >
                    > > > > > > The key things seem to be
                    > > > > > > -- as wide and shallow a cone as feasible
                    > > > > > > -- lots of aluminum shavings, unless you have the jasper and aventurine. That's RED jasper, BTW.
                    > > > > > > This is to hold the special pgms.
                    > > > > > >
                    > > > > > > This alone, with some cheap magnets and a bit of quartz, will probably make something pretty impressive.
                    > > > > > > Aside from some VF and S-B layers, there may be clear resin layers and layers with other single substances like turmeric, sindhooram, or other powder mixes.
                    > > > > > >
                    > > > > > > The aluminum i'm using is in small chips that pack densely. I pour first, then sprinkle on the aluminum, and heap it up in the center.
                    > > > > > > (If instead you put a bunch of dense shavings into the mold first, then pour, you will probably end up with unsightly air pockets on the surface of the cone.) I just did the last pour on such a unit that is mostly dense aluminum with a few small things inserted.
                    > > > > > >
                    > > > > > > You will probably be guided to put a lot of the rocks and other objects along the periphery and maybe the flat bottom of cone, and mainly aluminum (or resin in the case you use the red & green stones) in the center and top portions. This is unusual, but go with it.
                    > > > > > >
                    > > > > > > What sets these cones apart is the wider angle and the pgms that go into the aluminum (or jasper and aventurine).
                    > > > > > > These weapons are enormously crispy and have already gone far to calm down a lot of evil attack energies. These are like Power Wands on steroids, using only cheap ingredients.
                    > > > > > >
                    > > > > > > These are the 2 first ones i made, that have the colored stones but very little aluminum.
                    > > > > > > http://loohan.com/CombatCones.jpg
                    > > > > > > The smaller one has maybe 1.5 cups of steel shavings, offset from center. If you use the colored stones insted of aluminum, and metal shavings used will likely be lopsidedly placed.
                    > > > > > >
                    > > > > > >
                    > > > > > >
                    > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                    > > > > > > >
                    > > > > > > > Advance warning for crafters who have been working with The Committee:
                    > > > > > > > Soon i will be posting info on how to make cone units that are superior remote weapons. There is no one way to make these. But there will be some guidelines to help you along.
                    > > > > > > >
                    > > > > > > > If you are able to, please acquire some of these excellent molds:
                    > > > > > > > http://www.southernstates.com/catalog/p-5004-little-giant-poultry-feeder-cover-22lb.aspx
                    > > > > > > > Little Giant Poultry Feeder Cover 22lb
                    > > > > > > > SKU: 10030801
                    > > > > > > > I bought one at a feed store for 2.79
                    > > > > > > > Will get more next time.
                    > > > > > > >
                    > > > > > > > Otherwise, find or make some other large cone molds that are of a very shallow slope like this one or close to it.
                    > > > > > > > If that's not feasible, get a big red 2-qt funnel of the type sold in stores all over the US for around $1. But don't go with a steeper mold than that.
                    > > > > > > > http://www.digitalfrontiersuf.com/wp-content/images/red-funnel.jpg
                    > > > > > > >
                    > > > > > > > Also some preferably smallish jasper and green aventurine, like at least 1/2 pound of each, tumbled or rough for each cone.
                    > > > > > > >
                    > > > > > > > OR the same pgms can go into generous quantities of aluminum shavings. So if you have that, you don't need the rox.
                    > > > > > > >
                    > > > > > > > Also some small cheap magnets. Most any will do, but ideally, i recommend these Precision Craft:
                    > > > > > > > http://www.hardwareandtools.com/Stanley-Hardware-N302-372-PrecisionCraft-by-Stanley-National-Assorted-Flexible-Shape-Magnets-Pack-Of-30-038613302372.html
                    > > > > > > > I just paid 7.99 for these in a blister pack in the hardware store, and here they are selling them for 2.97!
                    > > > > > > > Also there are, in similar blister packs, SKU N302-240 (which does not google well) and contains 6 ring magnets, as well as SKU N302-265, 8 discs. I recommend getting them all if they are handy at your local hardware store.
                    > > > > > > >
                    > > > > > > > Also some of the pink goo i mentioned here
                    > > > > > > > http://loohan.com/otb38.htm
                    > > > > > > >
                    > > > > > >
                    > > > > >
                    > > > >
                    > > >
                    > >
                    >
                  • loohon
                    I went to a different feed store. This one did not have the feeder cones, but did have the big orange ones for 3.95 instead on the 5.99 the satanist-owned
                    Message 9 of 18 , Sep 9, 2011
                      I went to a different feed store. This one did not have the feeder cones, but did have the big orange ones for 3.95 instead on the 5.99 the satanist-owned store in Marshall charges.
                      These also had identification on them: CHIF004. However, this does not come up in google.
                      I bought a couple more. I'm a serious conehead.
                      Sometime i'll make one with a copper pipe sticking out the top, for blasting bad stuff in the sky.

                      --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@...> wrote:
                      >
                      > Went back to the feed store but they only had 1 more of those cool feeder molds. Bought it. Also they have those big orange cones like in
                      > this pic.
                      > http://loohan.com/CombatCones.jpg
                      > So i got another one. They are $6 but good quality for many uses. Proudly crafted in the Orient.
                      >
                      > Also i have 2 of these funnels i had gotten at the feed store:
                      > http://www.igetmore4less.com/images/CHIF0003.jpg
                      > They can be found on a websearch of CHIF0003
                      > I get these are good for Combat Cones too.
                      >
                      > So now i started a batch of 6: 2 of each of these types of molds.
                      >
                      > Also i got my aluminum powder today.
                      > And they had me mix some into a larger amount of silica, and add a fair bit of the cobalt carbonate to this. I will be using this mix soon.
                      > I suspect this is not the only way i will be mixing aluminum powder into these cones, but i do suspect the cobalt carbonate will always be mixed into the aluminum. Maybe not always silica.
                      >
                      > Right now they have only had me pour straight cobalt carbonate in epoxy into the tips of these 6 cones.
                      >
                      > Caution, TOXICITY: aluminum this fine is probably absorbed thru the skin. Hulda Clark claimed that one absorbs aluminum even just touching lawn chairs etc.
                      > Also cobalt carbonate is toxic.
                      > Always use caution, gloves, and a dust mask when handling such powders. Don't get into eyes.
                      >
                      > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                      > >
                      > > http://loohan.com/CombatConeDisk1.jpg
                      > > Right now it is not yet fully programmed.
                      > >
                      > > Maybe someday i'll rub it with fine steel wool or something to get an aesthetic matte finish. Or maybe a coarse rubbing compound. The glossiness is a bit garish.
                      > >
                      > > This massive disk is PACKED. Unlike much of my contemporary stuff, it is practically wall-to-wall rocks and metal in there. Heavy.
                      > >
                      > > A few notes about the disk base:
                      > > --Very dense powder mixes for the most part. Almost 1# of turmeric powder in there, for instance. Some of it used straight, the rest mixed with other ingredients like fine silica. I made many unique powder mixes ad hoc for this.
                      > > --Lotsa capacitors as i already mentioned.
                      > > --Does contain some aluminum shaving with the same pgms as go into the aluminum cones.
                      > > --Also a couple dozen green aventurine tumbled stones that got the 2 special pgms that go into those. I.e. this base had a lot of programming that the base by itself could not use because the pgms require the broad cone shape to be effective.
                      > > --Some of those cheap magnets and some stainless steel screws. A few coils. Almost a whole tube of the Rose goo.
                      > >
                      > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                      > > >
                      > > > http://loohan.com/CombatConeAluminum2.jpg
                      > > > My latest.
                      > > >
                      > > > Now i am working on a base for the 1st one i made of that shape with the big orange funnel mold.
                      > > > Often i like to re-cast cones in disks.
                      > > > In this shape, i have been guided to use quite a bunch of capacitors. Luckily a friend had sent me bags full.
                      > > > Also i put in a few resistors of various strengths.
                      > > > The disk base i'm working on has dozens of capacitors too.
                      > > >
                      > > > I doubt i will make any more of these aluminum-heavy ones. I plan to make a bunch more cones when my aluminum powder gets here.
                      > > > Each one significantly suppresses the evil energies.
                      > > >
                      > > > I am a bit puzzled: it only takes a pound or so of the jasper/aventurine to make a cone, yet many pounds of aluminum shavings to replace these.
                      > > > Most of the programming in the shavings is a 4th pgm, which is also present to a lesser extent in the jasper/aventurine cones.
                      > > > Apparently this 4th pgm is necessary to make the aluminum units work well.
                      > > > However both types seem to be about just as good overall.
                      > > >
                      > > >
                      > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                      > > > >
                      > > > > Forgot to mention, that sexy pastel lavender stuff is cobalt carbonate i got from Bailey clay supplies like 2 years ago, and this is the first time The C had me open the bag.
                      > > > > There is a pgm that is kind of good for these cones that goes into cobalt carbonate mixed into resin.
                      > > > > Some resins might alter the color, i don't know.
                      > > > >
                      > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                      > > > > >
                      > > > > > CombatConeAluminum1.jpg
                      > > > > >
                      > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                      > > > > > >
                      > > > > > > Aluminum powder:
                      > > > > > > It occurred to me today that this would be good to augment fluffy aluminum shavings or substitute for them entirely.
                      > > > > > > I am most attracted to the 3000 mesh, which is more expensive.
                      > > > > > > I just ordered 2#
                      > > > > > > http://www.ebay.com/itm/2-lb-Aluminum-Powder-5-3000-Mesh-Super-Fine-/370468750296?pt=LH_DefaultDomain_0&hash=item5641a883d8
                      > > > > > > He also has 1# and 5# lots.
                      > > > > > >
                      > > > > > > Vaguely, i think that 3oz might be enough to sub entirely for the shavings if one had none. That's in the recommended cone mold.
                      > > > > > > Which seems a bit strange as i have been packing these 2 cones i've been working on with pounds of chips.
                      > > > > > > Probably the fine powder would change the resin such that it would then take the aluminum programs itself.
                      > > > > > > I suspect 3000 mesh is necessary to get the resin to work that way.
                      > > > > > >
                      > > > > > > BTW there are 3 distinct special pgms that go with these cones to make them so effective (but would not work in other shapes). 2 of these go into green aventurine, and the other goes into red jasper.
                      > > > > > > Alternatively all 3 go into heaps of aluminum or, i'm getting, resin with this fine powder in it.
                      > > > > > >
                      > > > > > > Eventually i would like to work out a "standard recipe" that anyone could follow to make these things, even if they lacked intuitived sensitivity.
                      > > > > > > With these weapons we can fry the nazis so hard...
                      > > > > > >
                      > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                      > > > > > > >
                      > > > > > > > Feels like someone in Europe already made a nice crispy one.
                      > > > > > > >
                      > > > > > > > You may also need a cup or 2 of small, cheap quartz crystals/shards.
                      > > > > > > > Of course the S-B and VF mixes (and S-B can now be done with cocoa only; see http://loohan.com/otb33summary.htm )
                      > > > > > > > As well as the usual bric-a-brac if you have it. Maybe an occasional coil of some sort. But even with limited variety of ingredients one should be able to make something good.
                      > > > > > > >
                      > > > > > > > The key things seem to be
                      > > > > > > > -- as wide and shallow a cone as feasible
                      > > > > > > > -- lots of aluminum shavings, unless you have the jasper and aventurine. That's RED jasper, BTW.
                      > > > > > > > This is to hold the special pgms.
                      > > > > > > >
                      > > > > > > > This alone, with some cheap magnets and a bit of quartz, will probably make something pretty impressive.
                      > > > > > > > Aside from some VF and S-B layers, there may be clear resin layers and layers with other single substances like turmeric, sindhooram, or other powder mixes.
                      > > > > > > >
                      > > > > > > > The aluminum i'm using is in small chips that pack densely. I pour first, then sprinkle on the aluminum, and heap it up in the center.
                      > > > > > > > (If instead you put a bunch of dense shavings into the mold first, then pour, you will probably end up with unsightly air pockets on the surface of the cone.) I just did the last pour on such a unit that is mostly dense aluminum with a few small things inserted.
                      > > > > > > >
                      > > > > > > > You will probably be guided to put a lot of the rocks and other objects along the periphery and maybe the flat bottom of cone, and mainly aluminum (or resin in the case you use the red & green stones) in the center and top portions. This is unusual, but go with it.
                      > > > > > > >
                      > > > > > > > What sets these cones apart is the wider angle and the pgms that go into the aluminum (or jasper and aventurine).
                      > > > > > > > These weapons are enormously crispy and have already gone far to calm down a lot of evil attack energies. These are like Power Wands on steroids, using only cheap ingredients.
                      > > > > > > >
                      > > > > > > > These are the 2 first ones i made, that have the colored stones but very little aluminum.
                      > > > > > > > http://loohan.com/CombatCones.jpg
                      > > > > > > > The smaller one has maybe 1.5 cups of steel shavings, offset from center. If you use the colored stones insted of aluminum, and metal shavings used will likely be lopsidedly placed.
                      > > > > > > >
                      > > > > > > >
                      > > > > > > >
                      > > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                      > > > > > > > >
                      > > > > > > > > Advance warning for crafters who have been working with The Committee:
                      > > > > > > > > Soon i will be posting info on how to make cone units that are superior remote weapons. There is no one way to make these. But there will be some guidelines to help you along.
                      > > > > > > > >
                      > > > > > > > > If you are able to, please acquire some of these excellent molds:
                      > > > > > > > > http://www.southernstates.com/catalog/p-5004-little-giant-poultry-feeder-cover-22lb.aspx
                      > > > > > > > > Little Giant Poultry Feeder Cover 22lb
                      > > > > > > > > SKU: 10030801
                      > > > > > > > > I bought one at a feed store for 2.79
                      > > > > > > > > Will get more next time.
                      > > > > > > > >
                      > > > > > > > > Otherwise, find or make some other large cone molds that are of a very shallow slope like this one or close to it.
                      > > > > > > > > If that's not feasible, get a big red 2-qt funnel of the type sold in stores all over the US for around $1. But don't go with a steeper mold than that.
                      > > > > > > > > http://www.digitalfrontiersuf.com/wp-content/images/red-funnel.jpg
                      > > > > > > > >
                      > > > > > > > > Also some preferably smallish jasper and green aventurine, like at least 1/2 pound of each, tumbled or rough for each cone.
                      > > > > > > > >
                      > > > > > > > > OR the same pgms can go into generous quantities of aluminum shavings. So if you have that, you don't need the rox.
                      > > > > > > > >
                      > > > > > > > > Also some small cheap magnets. Most any will do, but ideally, i recommend these Precision Craft:
                      > > > > > > > > http://www.hardwareandtools.com/Stanley-Hardware-N302-372-PrecisionCraft-by-Stanley-National-Assorted-Flexible-Shape-Magnets-Pack-Of-30-038613302372.html
                      > > > > > > > > I just paid 7.99 for these in a blister pack in the hardware store, and here they are selling them for 2.97!
                      > > > > > > > > Also there are, in similar blister packs, SKU N302-240 (which does not google well) and contains 6 ring magnets, as well as SKU N302-265, 8 discs. I recommend getting them all if they are handy at your local hardware store.
                      > > > > > > > >
                      > > > > > > > > Also some of the pink goo i mentioned here
                      > > > > > > > > http://loohan.com/otb38.htm
                      > > > > > > > >
                      > > > > > > >
                      > > > > > >
                      > > > > >
                      > > > >
                      > > >
                      > >
                      >
                    • loohon
                      Arguably, that lavender ledge is pretty tacky as well. However it was always meant to be obscured by a coil. Which i have commenced to do:
                      Message 10 of 18 , Sep 9, 2011
                        Arguably, that lavender ledge is pretty tacky as well. However it was always meant to be obscured by a coil.
                        Which i have commenced to do:
                        http://loohan.com/CombatConeDisk1coil.jpg
                        The coil is only about 20% programmed so far.

                        This is a nice thing about leaving ledges aroud the edges.

                        --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@...> wrote:
                        >
                        > http://loohan.com/CombatConeDisk1.jpg
                        > Right now it is not yet fully programmed.
                        >
                        > Maybe someday i'll rub it with fine steel wool or something to get an aesthetic matte finish. Or maybe a coarse rubbing compound. The glossiness is a bit garish.
                        >
                        > This massive disk is PACKED. Unlike much of my contemporary stuff, it is practically wall-to-wall rocks and metal in there. Heavy.
                        >
                        > A few notes about the disk base:
                        > --Very dense powder mixes for the most part. Almost 1# of turmeric powder in there, for instance. Some of it used straight, the rest mixed with other ingredients like fine silica. I made many unique powder mixes ad hoc for this.
                        > --Lotsa capacitors as i already mentioned.
                        > --Does contain some aluminum shaving with the same pgms as go into the aluminum cones.
                        > --Also a couple dozen green aventurine tumbled stones that got the 2 special pgms that go into those. I.e. this base had a lot of programming that the base by itself could not use because the pgms require the broad cone shape to be effective.
                        > --Some of those cheap magnets and some stainless steel screws. A few coils. Almost a whole tube of the Rose goo.
                        >
                        > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                        > >
                        > > http://loohan.com/CombatConeAluminum2.jpg
                        > > My latest.
                        > >
                        > > Now i am working on a base for the 1st one i made of that shape with the big orange funnel mold.
                        > > Often i like to re-cast cones in disks.
                        > > In this shape, i have been guided to use quite a bunch of capacitors. Luckily a friend had sent me bags full.
                        > > Also i put in a few resistors of various strengths.
                        > > The disk base i'm working on has dozens of capacitors too.
                        > >
                        > > I doubt i will make any more of these aluminum-heavy ones. I plan to make a bunch more cones when my aluminum powder gets here.
                        > > Each one significantly suppresses the evil energies.
                        > >
                        > > I am a bit puzzled: it only takes a pound or so of the jasper/aventurine to make a cone, yet many pounds of aluminum shavings to replace these.
                        > > Most of the programming in the shavings is a 4th pgm, which is also present to a lesser extent in the jasper/aventurine cones.
                        > > Apparently this 4th pgm is necessary to make the aluminum units work well.
                        > > However both types seem to be about just as good overall.
                        > >
                        > >
                        > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                        > > >
                        > > > Forgot to mention, that sexy pastel lavender stuff is cobalt carbonate i got from Bailey clay supplies like 2 years ago, and this is the first time The C had me open the bag.
                        > > > There is a pgm that is kind of good for these cones that goes into cobalt carbonate mixed into resin.
                        > > > Some resins might alter the color, i don't know.
                        > > >
                        > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                        > > > >
                        > > > > CombatConeAluminum1.jpg
                        > > > >
                        > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                        > > > > >
                        > > > > > Aluminum powder:
                        > > > > > It occurred to me today that this would be good to augment fluffy aluminum shavings or substitute for them entirely.
                        > > > > > I am most attracted to the 3000 mesh, which is more expensive.
                        > > > > > I just ordered 2#
                        > > > > > http://www.ebay.com/itm/2-lb-Aluminum-Powder-5-3000-Mesh-Super-Fine-/370468750296?pt=LH_DefaultDomain_0&hash=item5641a883d8
                        > > > > > He also has 1# and 5# lots.
                        > > > > >
                        > > > > > Vaguely, i think that 3oz might be enough to sub entirely for the shavings if one had none. That's in the recommended cone mold.
                        > > > > > Which seems a bit strange as i have been packing these 2 cones i've been working on with pounds of chips.
                        > > > > > Probably the fine powder would change the resin such that it would then take the aluminum programs itself.
                        > > > > > I suspect 3000 mesh is necessary to get the resin to work that way.
                        > > > > >
                        > > > > > BTW there are 3 distinct special pgms that go with these cones to make them so effective (but would not work in other shapes). 2 of these go into green aventurine, and the other goes into red jasper.
                        > > > > > Alternatively all 3 go into heaps of aluminum or, i'm getting, resin with this fine powder in it.
                        > > > > >
                        > > > > > Eventually i would like to work out a "standard recipe" that anyone could follow to make these things, even if they lacked intuitived sensitivity.
                        > > > > > With these weapons we can fry the nazis so hard...
                        > > > > >
                        > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                        > > > > > >
                        > > > > > > Feels like someone in Europe already made a nice crispy one.
                        > > > > > >
                        > > > > > > You may also need a cup or 2 of small, cheap quartz crystals/shards.
                        > > > > > > Of course the S-B and VF mixes (and S-B can now be done with cocoa only; see http://loohan.com/otb33summary.htm )
                        > > > > > > As well as the usual bric-a-brac if you have it. Maybe an occasional coil of some sort. But even with limited variety of ingredients one should be able to make something good.
                        > > > > > >
                        > > > > > > The key things seem to be
                        > > > > > > -- as wide and shallow a cone as feasible
                        > > > > > > -- lots of aluminum shavings, unless you have the jasper and aventurine. That's RED jasper, BTW.
                        > > > > > > This is to hold the special pgms.
                        > > > > > >
                        > > > > > > This alone, with some cheap magnets and a bit of quartz, will probably make something pretty impressive.
                        > > > > > > Aside from some VF and S-B layers, there may be clear resin layers and layers with other single substances like turmeric, sindhooram, or other powder mixes.
                        > > > > > >
                        > > > > > > The aluminum i'm using is in small chips that pack densely. I pour first, then sprinkle on the aluminum, and heap it up in the center.
                        > > > > > > (If instead you put a bunch of dense shavings into the mold first, then pour, you will probably end up with unsightly air pockets on the surface of the cone.) I just did the last pour on such a unit that is mostly dense aluminum with a few small things inserted.
                        > > > > > >
                        > > > > > > You will probably be guided to put a lot of the rocks and other objects along the periphery and maybe the flat bottom of cone, and mainly aluminum (or resin in the case you use the red & green stones) in the center and top portions. This is unusual, but go with it.
                        > > > > > >
                        > > > > > > What sets these cones apart is the wider angle and the pgms that go into the aluminum (or jasper and aventurine).
                        > > > > > > These weapons are enormously crispy and have already gone far to calm down a lot of evil attack energies. These are like Power Wands on steroids, using only cheap ingredients.
                        > > > > > >
                        > > > > > > These are the 2 first ones i made, that have the colored stones but very little aluminum.
                        > > > > > > http://loohan.com/CombatCones.jpg
                        > > > > > > The smaller one has maybe 1.5 cups of steel shavings, offset from center. If you use the colored stones insted of aluminum, and metal shavings used will likely be lopsidedly placed.
                        > > > > > >
                        > > > > > >
                        > > > > > >
                        > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                        > > > > > > >
                        > > > > > > > Advance warning for crafters who have been working with The Committee:
                        > > > > > > > Soon i will be posting info on how to make cone units that are superior remote weapons. There is no one way to make these. But there will be some guidelines to help you along.
                        > > > > > > >
                        > > > > > > > If you are able to, please acquire some of these excellent molds:
                        > > > > > > > http://www.southernstates.com/catalog/p-5004-little-giant-poultry-feeder-cover-22lb.aspx
                        > > > > > > > Little Giant Poultry Feeder Cover 22lb
                        > > > > > > > SKU: 10030801
                        > > > > > > > I bought one at a feed store for 2.79
                        > > > > > > > Will get more next time.
                        > > > > > > >
                        > > > > > > > Otherwise, find or make some other large cone molds that are of a very shallow slope like this one or close to it.
                        > > > > > > > If that's not feasible, get a big red 2-qt funnel of the type sold in stores all over the US for around $1. But don't go with a steeper mold than that.
                        > > > > > > > http://www.digitalfrontiersuf.com/wp-content/images/red-funnel.jpg
                        > > > > > > >
                        > > > > > > > Also some preferably smallish jasper and green aventurine, like at least 1/2 pound of each, tumbled or rough for each cone.
                        > > > > > > >
                        > > > > > > > OR the same pgms can go into generous quantities of aluminum shavings. So if you have that, you don't need the rox.
                        > > > > > > >
                        > > > > > > > Also some small cheap magnets. Most any will do, but ideally, i recommend these Precision Craft:
                        > > > > > > > http://www.hardwareandtools.com/Stanley-Hardware-N302-372-PrecisionCraft-by-Stanley-National-Assorted-Flexible-Shape-Magnets-Pack-Of-30-038613302372.html
                        > > > > > > > I just paid 7.99 for these in a blister pack in the hardware store, and here they are selling them for 2.97!
                        > > > > > > > Also there are, in similar blister packs, SKU N302-240 (which does not google well) and contains 6 ring magnets, as well as SKU N302-265, 8 discs. I recommend getting them all if they are handy at your local hardware store.
                        > > > > > > >
                        > > > > > > > Also some of the pink goo i mentioned here
                        > > > > > > > http://loohan.com/otb38.htm
                        > > > > > > >
                        > > > > > >
                        > > > > >
                        > > > >
                        > > >
                        > >
                        >
                      • loohon
                        I ll have pix in a couple days. The 6 new cones are nearly complete. In fact i put one on my Product page: http://loohan.com/CombatConeA1.jpg In this batch, i
                        Message 11 of 18 , Sep 13, 2011
                          I'll have pix in a couple days. The 6 new cones are nearly complete.
                          In fact i put one on my Product page:
                          http://loohan.com/CombatConeA1.jpg

                          In this batch, i did use some aluminum powder, but it was always a lesser ingredient mixed with other stuff.

                          I also used some aluminum shavings and copper shavings. And capacitors. And other stuff.

                          Usually very thick ad hoc mixes again. A couple of these weird mixes got the Strontium-Barium pgm!
                          Also used a lot of tulsi powder, and not always for the VF formula.

                          I noticed the same vendor i got the aluminum from also sells cobalt carbonate. Which is pricey as powders go. I also used a fair bit of that stuff and will order more.

                          --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@...> wrote:
                          >
                          > I went to a different feed store. This one did not have the feeder cones, but did have the big orange ones for 3.95 instead on the 5.99 the satanist-owned store in Marshall charges.
                          > These also had identification on them: CHIF004. However, this does not come up in google.
                          > I bought a couple more. I'm a serious conehead.
                          > Sometime i'll make one with a copper pipe sticking out the top, for blasting bad stuff in the sky.
                          >
                          > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                          > >
                          > > Went back to the feed store but they only had 1 more of those cool feeder molds. Bought it. Also they have those big orange cones like in
                          > > this pic.
                          > > http://loohan.com/CombatCones.jpg
                          > > So i got another one. They are $6 but good quality for many uses. Proudly crafted in the Orient.
                          > >
                          > > Also i have 2 of these funnels i had gotten at the feed store:
                          > > http://www.igetmore4less.com/images/CHIF0003.jpg
                          > > They can be found on a websearch of CHIF0003
                          > > I get these are good for Combat Cones too.
                          > >
                          > > So now i started a batch of 6: 2 of each of these types of molds.
                          > >
                          > > Also i got my aluminum powder today.
                          > > And they had me mix some into a larger amount of silica, and add a fair bit of the cobalt carbonate to this. I will be using this mix soon.
                          > > I suspect this is not the only way i will be mixing aluminum powder into these cones, but i do suspect the cobalt carbonate will always be mixed into the aluminum. Maybe not always silica.
                          > >
                          > > Right now they have only had me pour straight cobalt carbonate in epoxy into the tips of these 6 cones.
                          > >
                          > > Caution, TOXICITY: aluminum this fine is probably absorbed thru the skin. Hulda Clark claimed that one absorbs aluminum even just touching lawn chairs etc.
                          > > Also cobalt carbonate is toxic.
                          > > Always use caution, gloves, and a dust mask when handling such powders. Don't get into eyes.
                          > >
                          > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                          > > >
                          > > > http://loohan.com/CombatConeDisk1.jpg
                          > > > Right now it is not yet fully programmed.
                          > > >
                          > > > Maybe someday i'll rub it with fine steel wool or something to get an aesthetic matte finish. Or maybe a coarse rubbing compound. The glossiness is a bit garish.
                          > > >
                          > > > This massive disk is PACKED. Unlike much of my contemporary stuff, it is practically wall-to-wall rocks and metal in there. Heavy.
                          > > >
                          > > > A few notes about the disk base:
                          > > > --Very dense powder mixes for the most part. Almost 1# of turmeric powder in there, for instance. Some of it used straight, the rest mixed with other ingredients like fine silica. I made many unique powder mixes ad hoc for this.
                          > > > --Lotsa capacitors as i already mentioned.
                          > > > --Does contain some aluminum shaving with the same pgms as go into the aluminum cones.
                          > > > --Also a couple dozen green aventurine tumbled stones that got the 2 special pgms that go into those. I.e. this base had a lot of programming that the base by itself could not use because the pgms require the broad cone shape to be effective.
                          > > > --Some of those cheap magnets and some stainless steel screws. A few coils. Almost a whole tube of the Rose goo.
                          > > >
                          > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                          > > > >
                          > > > > http://loohan.com/CombatConeAluminum2.jpg
                          > > > > My latest.
                          > > > >
                          > > > > Now i am working on a base for the 1st one i made of that shape with the big orange funnel mold.
                          > > > > Often i like to re-cast cones in disks.
                          > > > > In this shape, i have been guided to use quite a bunch of capacitors. Luckily a friend had sent me bags full.
                          > > > > Also i put in a few resistors of various strengths.
                          > > > > The disk base i'm working on has dozens of capacitors too.
                          > > > >
                          > > > > I doubt i will make any more of these aluminum-heavy ones. I plan to make a bunch more cones when my aluminum powder gets here.
                          > > > > Each one significantly suppresses the evil energies.
                          > > > >
                          > > > > I am a bit puzzled: it only takes a pound or so of the jasper/aventurine to make a cone, yet many pounds of aluminum shavings to replace these.
                          > > > > Most of the programming in the shavings is a 4th pgm, which is also present to a lesser extent in the jasper/aventurine cones.
                          > > > > Apparently this 4th pgm is necessary to make the aluminum units work well.
                          > > > > However both types seem to be about just as good overall.
                          > > > >
                          > > > >
                          > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                          > > > > >
                          > > > > > Forgot to mention, that sexy pastel lavender stuff is cobalt carbonate i got from Bailey clay supplies like 2 years ago, and this is the first time The C had me open the bag.
                          > > > > > There is a pgm that is kind of good for these cones that goes into cobalt carbonate mixed into resin.
                          > > > > > Some resins might alter the color, i don't know.
                          > > > > >
                          > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                          > > > > > >
                          > > > > > > CombatConeAluminum1.jpg
                          > > > > > >
                          > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                          > > > > > > >
                          > > > > > > > Aluminum powder:
                          > > > > > > > It occurred to me today that this would be good to augment fluffy aluminum shavings or substitute for them entirely.
                          > > > > > > > I am most attracted to the 3000 mesh, which is more expensive.
                          > > > > > > > I just ordered 2#
                          > > > > > > > http://www.ebay.com/itm/2-lb-Aluminum-Powder-5-3000-Mesh-Super-Fine-/370468750296?pt=LH_DefaultDomain_0&hash=item5641a883d8
                          > > > > > > > He also has 1# and 5# lots.
                          > > > > > > >
                          > > > > > > > Vaguely, i think that 3oz might be enough to sub entirely for the shavings if one had none. That's in the recommended cone mold.
                          > > > > > > > Which seems a bit strange as i have been packing these 2 cones i've been working on with pounds of chips.
                          > > > > > > > Probably the fine powder would change the resin such that it would then take the aluminum programs itself.
                          > > > > > > > I suspect 3000 mesh is necessary to get the resin to work that way.
                          > > > > > > >
                          > > > > > > > BTW there are 3 distinct special pgms that go with these cones to make them so effective (but would not work in other shapes). 2 of these go into green aventurine, and the other goes into red jasper.
                          > > > > > > > Alternatively all 3 go into heaps of aluminum or, i'm getting, resin with this fine powder in it.
                          > > > > > > >
                          > > > > > > > Eventually i would like to work out a "standard recipe" that anyone could follow to make these things, even if they lacked intuitived sensitivity.
                          > > > > > > > With these weapons we can fry the nazis so hard...
                          > > > > > > >
                          > > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                          > > > > > > > >
                          > > > > > > > > Feels like someone in Europe already made a nice crispy one.
                          > > > > > > > >
                          > > > > > > > > You may also need a cup or 2 of small, cheap quartz crystals/shards.
                          > > > > > > > > Of course the S-B and VF mixes (and S-B can now be done with cocoa only; see http://loohan.com/otb33summary.htm )
                          > > > > > > > > As well as the usual bric-a-brac if you have it. Maybe an occasional coil of some sort. But even with limited variety of ingredients one should be able to make something good.
                          > > > > > > > >
                          > > > > > > > > The key things seem to be
                          > > > > > > > > -- as wide and shallow a cone as feasible
                          > > > > > > > > -- lots of aluminum shavings, unless you have the jasper and aventurine. That's RED jasper, BTW.
                          > > > > > > > > This is to hold the special pgms.
                          > > > > > > > >
                          > > > > > > > > This alone, with some cheap magnets and a bit of quartz, will probably make something pretty impressive.
                          > > > > > > > > Aside from some VF and S-B layers, there may be clear resin layers and layers with other single substances like turmeric, sindhooram, or other powder mixes.
                          > > > > > > > >
                          > > > > > > > > The aluminum i'm using is in small chips that pack densely. I pour first, then sprinkle on the aluminum, and heap it up in the center.
                          > > > > > > > > (If instead you put a bunch of dense shavings into the mold first, then pour, you will probably end up with unsightly air pockets on the surface of the cone.) I just did the last pour on such a unit that is mostly dense aluminum with a few small things inserted.
                          > > > > > > > >
                          > > > > > > > > You will probably be guided to put a lot of the rocks and other objects along the periphery and maybe the flat bottom of cone, and mainly aluminum (or resin in the case you use the red & green stones) in the center and top portions. This is unusual, but go with it.
                          > > > > > > > >
                          > > > > > > > > What sets these cones apart is the wider angle and the pgms that go into the aluminum (or jasper and aventurine).
                          > > > > > > > > These weapons are enormously crispy and have already gone far to calm down a lot of evil attack energies. These are like Power Wands on steroids, using only cheap ingredients.
                          > > > > > > > >
                          > > > > > > > > These are the 2 first ones i made, that have the colored stones but very little aluminum.
                          > > > > > > > > http://loohan.com/CombatCones.jpg
                          > > > > > > > > The smaller one has maybe 1.5 cups of steel shavings, offset from center. If you use the colored stones insted of aluminum, and metal shavings used will likely be lopsidedly placed.
                          > > > > > > > >
                          > > > > > > > >
                          > > > > > > > >
                          > > > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                          > > > > > > > > >
                          > > > > > > > > > Advance warning for crafters who have been working with The Committee:
                          > > > > > > > > > Soon i will be posting info on how to make cone units that are superior remote weapons. There is no one way to make these. But there will be some guidelines to help you along.
                          > > > > > > > > >
                          > > > > > > > > > If you are able to, please acquire some of these excellent molds:
                          > > > > > > > > > http://www.southernstates.com/catalog/p-5004-little-giant-poultry-feeder-cover-22lb.aspx
                          > > > > > > > > > Little Giant Poultry Feeder Cover 22lb
                          > > > > > > > > > SKU: 10030801
                          > > > > > > > > > I bought one at a feed store for 2.79
                          > > > > > > > > > Will get more next time.
                          > > > > > > > > >
                          > > > > > > > > > Otherwise, find or make some other large cone molds that are of a very shallow slope like this one or close to it.
                          > > > > > > > > > If that's not feasible, get a big red 2-qt funnel of the type sold in stores all over the US for around $1. But don't go with a steeper mold than that.
                          > > > > > > > > > http://www.digitalfrontiersuf.com/wp-content/images/red-funnel.jpg
                          > > > > > > > > >
                          > > > > > > > > > Also some preferably smallish jasper and green aventurine, like at least 1/2 pound of each, tumbled or rough for each cone.
                          > > > > > > > > >
                          > > > > > > > > > OR the same pgms can go into generous quantities of aluminum shavings. So if you have that, you don't need the rox.
                          > > > > > > > > >
                          > > > > > > > > > Also some small cheap magnets. Most any will do, but ideally, i recommend these Precision Craft:
                          > > > > > > > > > http://www.hardwareandtools.com/Stanley-Hardware-N302-372-PrecisionCraft-by-Stanley-National-Assorted-Flexible-Shape-Magnets-Pack-Of-30-038613302372.html
                          > > > > > > > > > I just paid 7.99 for these in a blister pack in the hardware store, and here they are selling them for 2.97!
                          > > > > > > > > > Also there are, in similar blister packs, SKU N302-240 (which does not google well) and contains 6 ring magnets, as well as SKU N302-265, 8 discs. I recommend getting them all if they are handy at your local hardware store.
                          > > > > > > > > >
                          > > > > > > > > > Also some of the pink goo i mentioned here
                          > > > > > > > > > http://loohan.com/otb38.htm
                          > > > > > > > > >
                          > > > > > > > >
                          > > > > > > >
                          > > > > > >
                          > > > > >
                          > > > >
                          > > >
                          > >
                          >
                        • loohon
                          http://loohan.com/CombatCones9.11.jpg That s the new 6. Change in plans. Now it looks like only the one on the right will get a base. The reason the big ones
                          Message 12 of 18 , Sep 14, 2011
                            http://loohan.com/CombatCones9.11.jpg
                            That's the new 6.

                            Change in plans. Now it looks like only the one on the right will get a base. The reason the big ones may not, is because it limits the coil space. The big unit Antuvozy has been making a coil for, well, i have to use a lot of force now to get the coil in place. And now she wants to make that coil a lot fatter.
                            So now she's designing a base for the cone on the right, that will go well with the coil.

                            Then we will make a thinner coil to replace the one we took off.

                            Also the 2 smaller ones that were made with CHIF003 funnels have fat stems because i used cylindrical molds on the stems and re-poured after the cones were already out of the funnels.

                            These all really rip.

                            BTW another thing to get is an assortment of machine screws or stove bolts with their nuts and maybe a few washers. I used a fair bit of those as well as some stainless steel screws.

                            --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@...> wrote:
                            >
                            > I'll have pix in a couple days. The 6 new cones are nearly complete.
                            > In fact i put one on my Product page:
                            > http://loohan.com/CombatConeA1.jpg
                            >
                            > In this batch, i did use some aluminum powder, but it was always a lesser ingredient mixed with other stuff.
                            >
                            > I also used some aluminum shavings and copper shavings. And capacitors. And other stuff.
                            >
                            > Usually very thick ad hoc mixes again. A couple of these weird mixes got the Strontium-Barium pgm!
                            > Also used a lot of tulsi powder, and not always for the VF formula.
                            >
                            > I noticed the same vendor i got the aluminum from also sells cobalt carbonate. Which is pricey as powders go. I also used a fair bit of that stuff and will order more.
                            >
                            > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                            > >
                            > > I went to a different feed store. This one did not have the feeder cones, but did have the big orange ones for 3.95 instead on the 5.99 the satanist-owned store in Marshall charges.
                            > > These also had identification on them: CHIF004. However, this does not come up in google.
                            > > I bought a couple more. I'm a serious conehead.
                            > > Sometime i'll make one with a copper pipe sticking out the top, for blasting bad stuff in the sky.
                            > >
                            > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                            > > >
                            > > > Went back to the feed store but they only had 1 more of those cool feeder molds. Bought it. Also they have those big orange cones like in
                            > > > this pic.
                            > > > http://loohan.com/CombatCones.jpg
                            > > > So i got another one. They are $6 but good quality for many uses. Proudly crafted in the Orient.
                            > > >
                            > > > Also i have 2 of these funnels i had gotten at the feed store:
                            > > > http://www.igetmore4less.com/images/CHIF0003.jpg
                            > > > They can be found on a websearch of CHIF0003
                            > > > I get these are good for Combat Cones too.
                            > > >
                            > > > So now i started a batch of 6: 2 of each of these types of molds.
                            > > >
                            > > > Also i got my aluminum powder today.
                            > > > And they had me mix some into a larger amount of silica, and add a fair bit of the cobalt carbonate to this. I will be using this mix soon.
                            > > > I suspect this is not the only way i will be mixing aluminum powder into these cones, but i do suspect the cobalt carbonate will always be mixed into the aluminum. Maybe not always silica.
                            > > >
                            > > > Right now they have only had me pour straight cobalt carbonate in epoxy into the tips of these 6 cones.
                            > > >
                            > > > Caution, TOXICITY: aluminum this fine is probably absorbed thru the skin. Hulda Clark claimed that one absorbs aluminum even just touching lawn chairs etc.
                            > > > Also cobalt carbonate is toxic.
                            > > > Always use caution, gloves, and a dust mask when handling such powders. Don't get into eyes.
                            > > >
                            > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                            > > > >
                            > > > > http://loohan.com/CombatConeDisk1.jpg
                            > > > > Right now it is not yet fully programmed.
                            > > > >
                            > > > > Maybe someday i'll rub it with fine steel wool or something to get an aesthetic matte finish. Or maybe a coarse rubbing compound. The glossiness is a bit garish.
                            > > > >
                            > > > > This massive disk is PACKED. Unlike much of my contemporary stuff, it is practically wall-to-wall rocks and metal in there. Heavy.
                            > > > >
                            > > > > A few notes about the disk base:
                            > > > > --Very dense powder mixes for the most part. Almost 1# of turmeric powder in there, for instance. Some of it used straight, the rest mixed with other ingredients like fine silica. I made many unique powder mixes ad hoc for this.
                            > > > > --Lotsa capacitors as i already mentioned.
                            > > > > --Does contain some aluminum shaving with the same pgms as go into the aluminum cones.
                            > > > > --Also a couple dozen green aventurine tumbled stones that got the 2 special pgms that go into those. I.e. this base had a lot of programming that the base by itself could not use because the pgms require the broad cone shape to be effective.
                            > > > > --Some of those cheap magnets and some stainless steel screws. A few coils. Almost a whole tube of the Rose goo.
                            > > > >
                            > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                            > > > > >
                            > > > > > http://loohan.com/CombatConeAluminum2.jpg
                            > > > > > My latest.
                            > > > > >
                            > > > > > Now i am working on a base for the 1st one i made of that shape with the big orange funnel mold.
                            > > > > > Often i like to re-cast cones in disks.
                            > > > > > In this shape, i have been guided to use quite a bunch of capacitors. Luckily a friend had sent me bags full.
                            > > > > > Also i put in a few resistors of various strengths.
                            > > > > > The disk base i'm working on has dozens of capacitors too.
                            > > > > >
                            > > > > > I doubt i will make any more of these aluminum-heavy ones. I plan to make a bunch more cones when my aluminum powder gets here.
                            > > > > > Each one significantly suppresses the evil energies.
                            > > > > >
                            > > > > > I am a bit puzzled: it only takes a pound or so of the jasper/aventurine to make a cone, yet many pounds of aluminum shavings to replace these.
                            > > > > > Most of the programming in the shavings is a 4th pgm, which is also present to a lesser extent in the jasper/aventurine cones.
                            > > > > > Apparently this 4th pgm is necessary to make the aluminum units work well.
                            > > > > > However both types seem to be about just as good overall.
                            > > > > >
                            > > > > >
                            > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                            > > > > > >
                            > > > > > > Forgot to mention, that sexy pastel lavender stuff is cobalt carbonate i got from Bailey clay supplies like 2 years ago, and this is the first time The C had me open the bag.
                            > > > > > > There is a pgm that is kind of good for these cones that goes into cobalt carbonate mixed into resin.
                            > > > > > > Some resins might alter the color, i don't know.
                            > > > > > >
                            > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                            > > > > > > >
                            > > > > > > > CombatConeAluminum1.jpg
                            > > > > > > >
                            > > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                            > > > > > > > >
                            > > > > > > > > Aluminum powder:
                            > > > > > > > > It occurred to me today that this would be good to augment fluffy aluminum shavings or substitute for them entirely.
                            > > > > > > > > I am most attracted to the 3000 mesh, which is more expensive.
                            > > > > > > > > I just ordered 2#
                            > > > > > > > > http://www.ebay.com/itm/2-lb-Aluminum-Powder-5-3000-Mesh-Super-Fine-/370468750296?pt=LH_DefaultDomain_0&hash=item5641a883d8
                            > > > > > > > > He also has 1# and 5# lots.
                            > > > > > > > >
                            > > > > > > > > Vaguely, i think that 3oz might be enough to sub entirely for the shavings if one had none. That's in the recommended cone mold.
                            > > > > > > > > Which seems a bit strange as i have been packing these 2 cones i've been working on with pounds of chips.
                            > > > > > > > > Probably the fine powder would change the resin such that it would then take the aluminum programs itself.
                            > > > > > > > > I suspect 3000 mesh is necessary to get the resin to work that way.
                            > > > > > > > >
                            > > > > > > > > BTW there are 3 distinct special pgms that go with these cones to make them so effective (but would not work in other shapes). 2 of these go into green aventurine, and the other goes into red jasper.
                            > > > > > > > > Alternatively all 3 go into heaps of aluminum or, i'm getting, resin with this fine powder in it.
                            > > > > > > > >
                            > > > > > > > > Eventually i would like to work out a "standard recipe" that anyone could follow to make these things, even if they lacked intuitived sensitivity.
                            > > > > > > > > With these weapons we can fry the nazis so hard...
                            > > > > > > > >
                            > > > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                            > > > > > > > > >
                            > > > > > > > > > Feels like someone in Europe already made a nice crispy one.
                            > > > > > > > > >
                            > > > > > > > > > You may also need a cup or 2 of small, cheap quartz crystals/shards.
                            > > > > > > > > > Of course the S-B and VF mixes (and S-B can now be done with cocoa only; see http://loohan.com/otb33summary.htm )
                            > > > > > > > > > As well as the usual bric-a-brac if you have it. Maybe an occasional coil of some sort. But even with limited variety of ingredients one should be able to make something good.
                            > > > > > > > > >
                            > > > > > > > > > The key things seem to be
                            > > > > > > > > > -- as wide and shallow a cone as feasible
                            > > > > > > > > > -- lots of aluminum shavings, unless you have the jasper and aventurine. That's RED jasper, BTW.
                            > > > > > > > > > This is to hold the special pgms.
                            > > > > > > > > >
                            > > > > > > > > > This alone, with some cheap magnets and a bit of quartz, will probably make something pretty impressive.
                            > > > > > > > > > Aside from some VF and S-B layers, there may be clear resin layers and layers with other single substances like turmeric, sindhooram, or other powder mixes.
                            > > > > > > > > >
                            > > > > > > > > > The aluminum i'm using is in small chips that pack densely. I pour first, then sprinkle on the aluminum, and heap it up in the center.
                            > > > > > > > > > (If instead you put a bunch of dense shavings into the mold first, then pour, you will probably end up with unsightly air pockets on the surface of the cone.) I just did the last pour on such a unit that is mostly dense aluminum with a few small things inserted.
                            > > > > > > > > >
                            > > > > > > > > > You will probably be guided to put a lot of the rocks and other objects along the periphery and maybe the flat bottom of cone, and mainly aluminum (or resin in the case you use the red & green stones) in the center and top portions. This is unusual, but go with it.
                            > > > > > > > > >
                            > > > > > > > > > What sets these cones apart is the wider angle and the pgms that go into the aluminum (or jasper and aventurine).
                            > > > > > > > > > These weapons are enormously crispy and have already gone far to calm down a lot of evil attack energies. These are like Power Wands on steroids, using only cheap ingredients.
                            > > > > > > > > >
                            > > > > > > > > > These are the 2 first ones i made, that have the colored stones but very little aluminum.
                            > > > > > > > > > http://loohan.com/CombatCones.jpg
                            > > > > > > > > > The smaller one has maybe 1.5 cups of steel shavings, offset from center. If you use the colored stones insted of aluminum, and metal shavings used will likely be lopsidedly placed.
                            > > > > > > > > >
                            > > > > > > > > >
                            > > > > > > > > >
                            > > > > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                            > > > > > > > > > >
                            > > > > > > > > > > Advance warning for crafters who have been working with The Committee:
                            > > > > > > > > > > Soon i will be posting info on how to make cone units that are superior remote weapons. There is no one way to make these. But there will be some guidelines to help you along.
                            > > > > > > > > > >
                            > > > > > > > > > > If you are able to, please acquire some of these excellent molds:
                            > > > > > > > > > > http://www.southernstates.com/catalog/p-5004-little-giant-poultry-feeder-cover-22lb.aspx
                            > > > > > > > > > > Little Giant Poultry Feeder Cover 22lb
                            > > > > > > > > > > SKU: 10030801
                            > > > > > > > > > > I bought one at a feed store for 2.79
                            > > > > > > > > > > Will get more next time.
                            > > > > > > > > > >
                            > > > > > > > > > > Otherwise, find or make some other large cone molds that are of a very shallow slope like this one or close to it.
                            > > > > > > > > > > If that's not feasible, get a big red 2-qt funnel of the type sold in stores all over the US for around $1. But don't go with a steeper mold than that.
                            > > > > > > > > > > http://www.digitalfrontiersuf.com/wp-content/images/red-funnel.jpg
                            > > > > > > > > > >
                            > > > > > > > > > > Also some preferably smallish jasper and green aventurine, like at least 1/2 pound of each, tumbled or rough for each cone.
                            > > > > > > > > > >
                            > > > > > > > > > > OR the same pgms can go into generous quantities of aluminum shavings. So if you have that, you don't need the rox.
                            > > > > > > > > > >
                            > > > > > > > > > > Also some small cheap magnets. Most any will do, but ideally, i recommend these Precision Craft:
                            > > > > > > > > > > http://www.hardwareandtools.com/Stanley-Hardware-N302-372-PrecisionCraft-by-Stanley-National-Assorted-Flexible-Shape-Magnets-Pack-Of-30-038613302372.html
                            > > > > > > > > > > I just paid 7.99 for these in a blister pack in the hardware store, and here they are selling them for 2.97!
                            > > > > > > > > > > Also there are, in similar blister packs, SKU N302-240 (which does not google well) and contains 6 ring magnets, as well as SKU N302-265, 8 discs. I recommend getting them all if they are handy at your local hardware store.
                            > > > > > > > > > >
                            > > > > > > > > > > Also some of the pink goo i mentioned here
                            > > > > > > > > > > http://loohan.com/otb38.htm
                            > > > > > > > > > >
                            > > > > > > > > >
                            > > > > > > > >
                            > > > > > > >
                            > > > > > >
                            > > > > >
                            > > > >
                            > > >
                            > >
                            >
                          • loohon
                            It s funny how they started working a lot harder after i uploaded the pic. I just realized, all these Combat Cones i ve been making also have at least 2 copies
                            Message 13 of 18 , Sep 14, 2011
                              It's funny how they started working a lot harder after i uploaded the pic.
                              I just realized, all these Combat Cones i've been making also have at least 2 copies of the Grid Pgm... so now they are working over the internet.

                              --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@...> wrote:
                              >
                              > http://loohan.com/CombatCones9.11.jpg
                              > That's the new 6.
                              >
                              > Change in plans. Now it looks like only the one on the right will get a base. The reason the big ones may not, is because it limits the coil space. The big unit Antuvozy has been making a coil for, well, i have to use a lot of force now to get the coil in place. And now she wants to make that coil a lot fatter.
                              > So now she's designing a base for the cone on the right, that will go well with the coil.
                              >
                              > Then we will make a thinner coil to replace the one we took off.
                              >
                              > Also the 2 smaller ones that were made with CHIF003 funnels have fat stems because i used cylindrical molds on the stems and re-poured after the cones were already out of the funnels.
                              >
                              > These all really rip.
                              >
                              > BTW another thing to get is an assortment of machine screws or stove bolts with their nuts and maybe a few washers. I used a fair bit of those as well as some stainless steel screws.
                              >
                              > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                              > >
                              > > I'll have pix in a couple days. The 6 new cones are nearly complete.
                              > > In fact i put one on my Product page:
                              > > http://loohan.com/CombatConeA1.jpg
                              > >
                              > > In this batch, i did use some aluminum powder, but it was always a lesser ingredient mixed with other stuff.
                              > >
                              > > I also used some aluminum shavings and copper shavings. And capacitors. And other stuff.
                              > >
                              > > Usually very thick ad hoc mixes again. A couple of these weird mixes got the Strontium-Barium pgm!
                              > > Also used a lot of tulsi powder, and not always for the VF formula.
                              > >
                              > > I noticed the same vendor i got the aluminum from also sells cobalt carbonate. Which is pricey as powders go. I also used a fair bit of that stuff and will order more.
                              > >
                              > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                              > > >
                              > > > I went to a different feed store. This one did not have the feeder cones, but did have the big orange ones for 3.95 instead on the 5.99 the satanist-owned store in Marshall charges.
                              > > > These also had identification on them: CHIF004. However, this does not come up in google.
                              > > > I bought a couple more. I'm a serious conehead.
                              > > > Sometime i'll make one with a copper pipe sticking out the top, for blasting bad stuff in the sky.
                              > > >
                              > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                              > > > >
                              > > > > Went back to the feed store but they only had 1 more of those cool feeder molds. Bought it. Also they have those big orange cones like in
                              > > > > this pic.
                              > > > > http://loohan.com/CombatCones.jpg
                              > > > > So i got another one. They are $6 but good quality for many uses. Proudly crafted in the Orient.
                              > > > >
                              > > > > Also i have 2 of these funnels i had gotten at the feed store:
                              > > > > http://www.igetmore4less.com/images/CHIF0003.jpg
                              > > > > They can be found on a websearch of CHIF0003
                              > > > > I get these are good for Combat Cones too.
                              > > > >
                              > > > > So now i started a batch of 6: 2 of each of these types of molds.
                              > > > >
                              > > > > Also i got my aluminum powder today.
                              > > > > And they had me mix some into a larger amount of silica, and add a fair bit of the cobalt carbonate to this. I will be using this mix soon.
                              > > > > I suspect this is not the only way i will be mixing aluminum powder into these cones, but i do suspect the cobalt carbonate will always be mixed into the aluminum. Maybe not always silica.
                              > > > >
                              > > > > Right now they have only had me pour straight cobalt carbonate in epoxy into the tips of these 6 cones.
                              > > > >
                              > > > > Caution, TOXICITY: aluminum this fine is probably absorbed thru the skin. Hulda Clark claimed that one absorbs aluminum even just touching lawn chairs etc.
                              > > > > Also cobalt carbonate is toxic.
                              > > > > Always use caution, gloves, and a dust mask when handling such powders. Don't get into eyes.
                              > > > >
                              > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                              > > > > >
                              > > > > > http://loohan.com/CombatConeDisk1.jpg
                              > > > > > Right now it is not yet fully programmed.
                              > > > > >
                              > > > > > Maybe someday i'll rub it with fine steel wool or something to get an aesthetic matte finish. Or maybe a coarse rubbing compound. The glossiness is a bit garish.
                              > > > > >
                              > > > > > This massive disk is PACKED. Unlike much of my contemporary stuff, it is practically wall-to-wall rocks and metal in there. Heavy.
                              > > > > >
                              > > > > > A few notes about the disk base:
                              > > > > > --Very dense powder mixes for the most part. Almost 1# of turmeric powder in there, for instance. Some of it used straight, the rest mixed with other ingredients like fine silica. I made many unique powder mixes ad hoc for this.
                              > > > > > --Lotsa capacitors as i already mentioned.
                              > > > > > --Does contain some aluminum shaving with the same pgms as go into the aluminum cones.
                              > > > > > --Also a couple dozen green aventurine tumbled stones that got the 2 special pgms that go into those. I.e. this base had a lot of programming that the base by itself could not use because the pgms require the broad cone shape to be effective.
                              > > > > > --Some of those cheap magnets and some stainless steel screws. A few coils. Almost a whole tube of the Rose goo.
                              > > > > >
                              > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                              > > > > > >
                              > > > > > > http://loohan.com/CombatConeAluminum2.jpg
                              > > > > > > My latest.
                              > > > > > >
                              > > > > > > Now i am working on a base for the 1st one i made of that shape with the big orange funnel mold.
                              > > > > > > Often i like to re-cast cones in disks.
                              > > > > > > In this shape, i have been guided to use quite a bunch of capacitors. Luckily a friend had sent me bags full.
                              > > > > > > Also i put in a few resistors of various strengths.
                              > > > > > > The disk base i'm working on has dozens of capacitors too.
                              > > > > > >
                              > > > > > > I doubt i will make any more of these aluminum-heavy ones. I plan to make a bunch more cones when my aluminum powder gets here.
                              > > > > > > Each one significantly suppresses the evil energies.
                              > > > > > >
                              > > > > > > I am a bit puzzled: it only takes a pound or so of the jasper/aventurine to make a cone, yet many pounds of aluminum shavings to replace these.
                              > > > > > > Most of the programming in the shavings is a 4th pgm, which is also present to a lesser extent in the jasper/aventurine cones.
                              > > > > > > Apparently this 4th pgm is necessary to make the aluminum units work well.
                              > > > > > > However both types seem to be about just as good overall.
                              > > > > > >
                              > > > > > >
                              > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                              > > > > > > >
                              > > > > > > > Forgot to mention, that sexy pastel lavender stuff is cobalt carbonate i got from Bailey clay supplies like 2 years ago, and this is the first time The C had me open the bag.
                              > > > > > > > There is a pgm that is kind of good for these cones that goes into cobalt carbonate mixed into resin.
                              > > > > > > > Some resins might alter the color, i don't know.
                              > > > > > > >
                              > > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                              > > > > > > > >
                              > > > > > > > > CombatConeAluminum1.jpg
                              > > > > > > > >
                              > > > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                              > > > > > > > > >
                              > > > > > > > > > Aluminum powder:
                              > > > > > > > > > It occurred to me today that this would be good to augment fluffy aluminum shavings or substitute for them entirely.
                              > > > > > > > > > I am most attracted to the 3000 mesh, which is more expensive.
                              > > > > > > > > > I just ordered 2#
                              > > > > > > > > > http://www.ebay.com/itm/2-lb-Aluminum-Powder-5-3000-Mesh-Super-Fine-/370468750296?pt=LH_DefaultDomain_0&hash=item5641a883d8
                              > > > > > > > > > He also has 1# and 5# lots.
                              > > > > > > > > >
                              > > > > > > > > > Vaguely, i think that 3oz might be enough to sub entirely for the shavings if one had none. That's in the recommended cone mold.
                              > > > > > > > > > Which seems a bit strange as i have been packing these 2 cones i've been working on with pounds of chips.
                              > > > > > > > > > Probably the fine powder would change the resin such that it would then take the aluminum programs itself.
                              > > > > > > > > > I suspect 3000 mesh is necessary to get the resin to work that way.
                              > > > > > > > > >
                              > > > > > > > > > BTW there are 3 distinct special pgms that go with these cones to make them so effective (but would not work in other shapes). 2 of these go into green aventurine, and the other goes into red jasper.
                              > > > > > > > > > Alternatively all 3 go into heaps of aluminum or, i'm getting, resin with this fine powder in it.
                              > > > > > > > > >
                              > > > > > > > > > Eventually i would like to work out a "standard recipe" that anyone could follow to make these things, even if they lacked intuitived sensitivity.
                              > > > > > > > > > With these weapons we can fry the nazis so hard...
                              > > > > > > > > >
                              > > > > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                              > > > > > > > > > >
                              > > > > > > > > > > Feels like someone in Europe already made a nice crispy one.
                              > > > > > > > > > >
                              > > > > > > > > > > You may also need a cup or 2 of small, cheap quartz crystals/shards.
                              > > > > > > > > > > Of course the S-B and VF mixes (and S-B can now be done with cocoa only; see http://loohan.com/otb33summary.htm )
                              > > > > > > > > > > As well as the usual bric-a-brac if you have it. Maybe an occasional coil of some sort. But even with limited variety of ingredients one should be able to make something good.
                              > > > > > > > > > >
                              > > > > > > > > > > The key things seem to be
                              > > > > > > > > > > -- as wide and shallow a cone as feasible
                              > > > > > > > > > > -- lots of aluminum shavings, unless you have the jasper and aventurine. That's RED jasper, BTW.
                              > > > > > > > > > > This is to hold the special pgms.
                              > > > > > > > > > >
                              > > > > > > > > > > This alone, with some cheap magnets and a bit of quartz, will probably make something pretty impressive.
                              > > > > > > > > > > Aside from some VF and S-B layers, there may be clear resin layers and layers with other single substances like turmeric, sindhooram, or other powder mixes.
                              > > > > > > > > > >
                              > > > > > > > > > > The aluminum i'm using is in small chips that pack densely. I pour first, then sprinkle on the aluminum, and heap it up in the center.
                              > > > > > > > > > > (If instead you put a bunch of dense shavings into the mold first, then pour, you will probably end up with unsightly air pockets on the surface of the cone.) I just did the last pour on such a unit that is mostly dense aluminum with a few small things inserted.
                              > > > > > > > > > >
                              > > > > > > > > > > You will probably be guided to put a lot of the rocks and other objects along the periphery and maybe the flat bottom of cone, and mainly aluminum (or resin in the case you use the red & green stones) in the center and top portions. This is unusual, but go with it.
                              > > > > > > > > > >
                              > > > > > > > > > > What sets these cones apart is the wider angle and the pgms that go into the aluminum (or jasper and aventurine).
                              > > > > > > > > > > These weapons are enormously crispy and have already gone far to calm down a lot of evil attack energies. These are like Power Wands on steroids, using only cheap ingredients.
                              > > > > > > > > > >
                              > > > > > > > > > > These are the 2 first ones i made, that have the colored stones but very little aluminum.
                              > > > > > > > > > > http://loohan.com/CombatCones.jpg
                              > > > > > > > > > > The smaller one has maybe 1.5 cups of steel shavings, offset from center. If you use the colored stones insted of aluminum, and metal shavings used will likely be lopsidedly placed.
                              > > > > > > > > > >
                              > > > > > > > > > >
                              > > > > > > > > > >
                              > > > > > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                              > > > > > > > > > > >
                              > > > > > > > > > > > Advance warning for crafters who have been working with The Committee:
                              > > > > > > > > > > > Soon i will be posting info on how to make cone units that are superior remote weapons. There is no one way to make these. But there will be some guidelines to help you along.
                              > > > > > > > > > > >
                              > > > > > > > > > > > If you are able to, please acquire some of these excellent molds:
                              > > > > > > > > > > > http://www.southernstates.com/catalog/p-5004-little-giant-poultry-feeder-cover-22lb.aspx
                              > > > > > > > > > > > Little Giant Poultry Feeder Cover 22lb
                              > > > > > > > > > > > SKU: 10030801
                              > > > > > > > > > > > I bought one at a feed store for 2.79
                              > > > > > > > > > > > Will get more next time.
                              > > > > > > > > > > >
                              > > > > > > > > > > > Otherwise, find or make some other large cone molds that are of a very shallow slope like this one or close to it.
                              > > > > > > > > > > > If that's not feasible, get a big red 2-qt funnel of the type sold in stores all over the US for around $1. But don't go with a steeper mold than that.
                              > > > > > > > > > > > http://www.digitalfrontiersuf.com/wp-content/images/red-funnel.jpg
                              > > > > > > > > > > >
                              > > > > > > > > > > > Also some preferably smallish jasper and green aventurine, like at least 1/2 pound of each, tumbled or rough for each cone.
                              > > > > > > > > > > >
                              > > > > > > > > > > > OR the same pgms can go into generous quantities of aluminum shavings. So if you have that, you don't need the rox.
                              > > > > > > > > > > >
                              > > > > > > > > > > > Also some small cheap magnets. Most any will do, but ideally, i recommend these Precision Craft:
                              > > > > > > > > > > > http://www.hardwareandtools.com/Stanley-Hardware-N302-372-PrecisionCraft-by-Stanley-National-Assorted-Flexible-Shape-Magnets-Pack-Of-30-038613302372.html
                              > > > > > > > > > > > I just paid 7.99 for these in a blister pack in the hardware store, and here they are selling them for 2.97!
                              > > > > > > > > > > > Also there are, in similar blister packs, SKU N302-240 (which does not google well) and contains 6 ring magnets, as well as SKU N302-265, 8 discs. I recommend getting them all if they are handy at your local hardware store.
                              > > > > > > > > > > >
                              > > > > > > > > > > > Also some of the pink goo i mentioned here
                              > > > > > > > > > > > http://loohan.com/otb38.htm
                              > > > > > > > > > > >
                              > > > > > > > > > >
                              > > > > > > > > >
                              > > > > > > > >
                              > > > > > > >
                              > > > > > >
                              > > > > >
                              > > > >
                              > > >
                              > >
                              >
                            • loohon
                              OK, i built a base for that unit that will be getting the coil from the other one later. One interesting thing about this base: it is largely composed of a few
                              Message 14 of 18 , Sep 25, 2011
                                OK, i built a base for that unit that will be getting the coil from the other one later.
                                One interesting thing about this base: it is largely composed of a few big chunks of sandstone i picked up off the ground. And all this rock is programmed with 1 pgm at this time: the Death Ray pgm mentioned in http://loohan.com/otb27c.htm on Oct. 21, '08:

                                "September 21, '08: The death-ray program is something different. It is not compressible. It puts out a freq inimical to all life forms (I think) but has programming to ensure that it can only be used against evil beings. I have been using it a while now with no ill effect to myself, and plenty of ill effect to the enemies.

                                "It requires a crystal approximately 1 cu. in. in displacement, either smoky, clear, or white quartz. Even quartzite is OK.
                                Each person can have up to 5 of these stones."

                                There might be exceptions to the quantity limits rule for skilled crafters. I must have half a gallon of sandstone in there.

                                This base also had little else other than resin mix. A few shavings and other odds and ends, but it was fairly simple to make.

                                This unit kicks. I'll have a pic in a few days when i get coils on these things.
                                I also made a powerful base for the smaller of the 2 aluminum cones i made a while back.




                                --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@...> wrote:
                                >
                                > It's funny how they started working a lot harder after i uploaded the pic.
                                > I just realized, all these Combat Cones i've been making also have at least 2 copies of the Grid Pgm... so now they are working over the internet.
                                >
                                > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                > >
                                > > http://loohan.com/CombatCones9.11.jpg
                                > > That's the new 6.
                                > >
                                > > Change in plans. Now it looks like only the one on the right will get a base. The reason the big ones may not, is because it limits the coil space. The big unit Antuvozy has been making a coil for, well, i have to use a lot of force now to get the coil in place. And now she wants to make that coil a lot fatter.
                                > > So now she's designing a base for the cone on the right, that will go well with the coil.
                                > >
                                > > Then we will make a thinner coil to replace the one we took off.
                                > >
                                > > Also the 2 smaller ones that were made with CHIF003 funnels have fat stems because i used cylindrical molds on the stems and re-poured after the cones were already out of the funnels.
                                > >
                                > > These all really rip.
                                > >
                                > > BTW another thing to get is an assortment of machine screws or stove bolts with their nuts and maybe a few washers. I used a fair bit of those as well as some stainless steel screws.
                                > >
                                > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                > > >
                                > > > I'll have pix in a couple days. The 6 new cones are nearly complete.
                                > > > In fact i put one on my Product page:
                                > > > http://loohan.com/CombatConeA1.jpg
                                > > >
                                > > > In this batch, i did use some aluminum powder, but it was always a lesser ingredient mixed with other stuff.
                                > > >
                                > > > I also used some aluminum shavings and copper shavings. And capacitors. And other stuff.
                                > > >
                                > > > Usually very thick ad hoc mixes again. A couple of these weird mixes got the Strontium-Barium pgm!
                                > > > Also used a lot of tulsi powder, and not always for the VF formula.
                                > > >
                                > > > I noticed the same vendor i got the aluminum from also sells cobalt carbonate. Which is pricey as powders go. I also used a fair bit of that stuff and will order more.
                                > > >
                                > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                > > > >
                                > > > > I went to a different feed store. This one did not have the feeder cones, but did have the big orange ones for 3.95 instead on the 5.99 the satanist-owned store in Marshall charges.
                                > > > > These also had identification on them: CHIF004. However, this does not come up in google.
                                > > > > I bought a couple more. I'm a serious conehead.
                                > > > > Sometime i'll make one with a copper pipe sticking out the top, for blasting bad stuff in the sky.
                                > > > >
                                > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                > > > > >
                                > > > > > Went back to the feed store but they only had 1 more of those cool feeder molds. Bought it. Also they have those big orange cones like in
                                > > > > > this pic.
                                > > > > > http://loohan.com/CombatCones.jpg
                                > > > > > So i got another one. They are $6 but good quality for many uses. Proudly crafted in the Orient.
                                > > > > >
                                > > > > > Also i have 2 of these funnels i had gotten at the feed store:
                                > > > > > http://www.igetmore4less.com/images/CHIF0003.jpg
                                > > > > > They can be found on a websearch of CHIF0003
                                > > > > > I get these are good for Combat Cones too.
                                > > > > >
                                > > > > > So now i started a batch of 6: 2 of each of these types of molds.
                                > > > > >
                                > > > > > Also i got my aluminum powder today.
                                > > > > > And they had me mix some into a larger amount of silica, and add a fair bit of the cobalt carbonate to this. I will be using this mix soon.
                                > > > > > I suspect this is not the only way i will be mixing aluminum powder into these cones, but i do suspect the cobalt carbonate will always be mixed into the aluminum. Maybe not always silica.
                                > > > > >
                                > > > > > Right now they have only had me pour straight cobalt carbonate in epoxy into the tips of these 6 cones.
                                > > > > >
                                > > > > > Caution, TOXICITY: aluminum this fine is probably absorbed thru the skin. Hulda Clark claimed that one absorbs aluminum even just touching lawn chairs etc.
                                > > > > > Also cobalt carbonate is toxic.
                                > > > > > Always use caution, gloves, and a dust mask when handling such powders. Don't get into eyes.
                                > > > > >
                                > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                > > > > > >
                                > > > > > > http://loohan.com/CombatConeDisk1.jpg
                                > > > > > > Right now it is not yet fully programmed.
                                > > > > > >
                                > > > > > > Maybe someday i'll rub it with fine steel wool or something to get an aesthetic matte finish. Or maybe a coarse rubbing compound. The glossiness is a bit garish.
                                > > > > > >
                                > > > > > > This massive disk is PACKED. Unlike much of my contemporary stuff, it is practically wall-to-wall rocks and metal in there. Heavy.
                                > > > > > >
                                > > > > > > A few notes about the disk base:
                                > > > > > > --Very dense powder mixes for the most part. Almost 1# of turmeric powder in there, for instance. Some of it used straight, the rest mixed with other ingredients like fine silica. I made many unique powder mixes ad hoc for this.
                                > > > > > > --Lotsa capacitors as i already mentioned.
                                > > > > > > --Does contain some aluminum shaving with the same pgms as go into the aluminum cones.
                                > > > > > > --Also a couple dozen green aventurine tumbled stones that got the 2 special pgms that go into those. I.e. this base had a lot of programming that the base by itself could not use because the pgms require the broad cone shape to be effective.
                                > > > > > > --Some of those cheap magnets and some stainless steel screws. A few coils. Almost a whole tube of the Rose goo.
                                > > > > > >
                                > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                > > > > > > >
                                > > > > > > > http://loohan.com/CombatConeAluminum2.jpg
                                > > > > > > > My latest.
                                > > > > > > >
                                > > > > > > > Now i am working on a base for the 1st one i made of that shape with the big orange funnel mold.
                                > > > > > > > Often i like to re-cast cones in disks.
                                > > > > > > > In this shape, i have been guided to use quite a bunch of capacitors. Luckily a friend had sent me bags full.
                                > > > > > > > Also i put in a few resistors of various strengths.
                                > > > > > > > The disk base i'm working on has dozens of capacitors too.
                                > > > > > > >
                                > > > > > > > I doubt i will make any more of these aluminum-heavy ones. I plan to make a bunch more cones when my aluminum powder gets here.
                                > > > > > > > Each one significantly suppresses the evil energies.
                                > > > > > > >
                                > > > > > > > I am a bit puzzled: it only takes a pound or so of the jasper/aventurine to make a cone, yet many pounds of aluminum shavings to replace these.
                                > > > > > > > Most of the programming in the shavings is a 4th pgm, which is also present to a lesser extent in the jasper/aventurine cones.
                                > > > > > > > Apparently this 4th pgm is necessary to make the aluminum units work well.
                                > > > > > > > However both types seem to be about just as good overall.
                                > > > > > > >
                                > > > > > > >
                                > > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                > > > > > > > >
                                > > > > > > > > Forgot to mention, that sexy pastel lavender stuff is cobalt carbonate i got from Bailey clay supplies like 2 years ago, and this is the first time The C had me open the bag.
                                > > > > > > > > There is a pgm that is kind of good for these cones that goes into cobalt carbonate mixed into resin.
                                > > > > > > > > Some resins might alter the color, i don't know.
                                > > > > > > > >
                                > > > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                > > > > > > > > >
                                > > > > > > > > > CombatConeAluminum1.jpg
                                > > > > > > > > >
                                > > > > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                > > > > > > > > > >
                                > > > > > > > > > > Aluminum powder:
                                > > > > > > > > > > It occurred to me today that this would be good to augment fluffy aluminum shavings or substitute for them entirely.
                                > > > > > > > > > > I am most attracted to the 3000 mesh, which is more expensive.
                                > > > > > > > > > > I just ordered 2#
                                > > > > > > > > > > http://www.ebay.com/itm/2-lb-Aluminum-Powder-5-3000-Mesh-Super-Fine-/370468750296?pt=LH_DefaultDomain_0&hash=item5641a883d8
                                > > > > > > > > > > He also has 1# and 5# lots.
                                > > > > > > > > > >
                                > > > > > > > > > > Vaguely, i think that 3oz might be enough to sub entirely for the shavings if one had none. That's in the recommended cone mold.
                                > > > > > > > > > > Which seems a bit strange as i have been packing these 2 cones i've been working on with pounds of chips.
                                > > > > > > > > > > Probably the fine powder would change the resin such that it would then take the aluminum programs itself.
                                > > > > > > > > > > I suspect 3000 mesh is necessary to get the resin to work that way.
                                > > > > > > > > > >
                                > > > > > > > > > > BTW there are 3 distinct special pgms that go with these cones to make them so effective (but would not work in other shapes). 2 of these go into green aventurine, and the other goes into red jasper.
                                > > > > > > > > > > Alternatively all 3 go into heaps of aluminum or, i'm getting, resin with this fine powder in it.
                                > > > > > > > > > >
                                > > > > > > > > > > Eventually i would like to work out a "standard recipe" that anyone could follow to make these things, even if they lacked intuitived sensitivity.
                                > > > > > > > > > > With these weapons we can fry the nazis so hard...
                                > > > > > > > > > >
                                > > > > > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                > > > > > > > > > > >
                                > > > > > > > > > > > Feels like someone in Europe already made a nice crispy one.
                                > > > > > > > > > > >
                                > > > > > > > > > > > You may also need a cup or 2 of small, cheap quartz crystals/shards.
                                > > > > > > > > > > > Of course the S-B and VF mixes (and S-B can now be done with cocoa only; see http://loohan.com/otb33summary.htm )
                                > > > > > > > > > > > As well as the usual bric-a-brac if you have it. Maybe an occasional coil of some sort. But even with limited variety of ingredients one should be able to make something good.
                                > > > > > > > > > > >
                                > > > > > > > > > > > The key things seem to be
                                > > > > > > > > > > > -- as wide and shallow a cone as feasible
                                > > > > > > > > > > > -- lots of aluminum shavings, unless you have the jasper and aventurine. That's RED jasper, BTW.
                                > > > > > > > > > > > This is to hold the special pgms.
                                > > > > > > > > > > >
                                > > > > > > > > > > > This alone, with some cheap magnets and a bit of quartz, will probably make something pretty impressive.
                                > > > > > > > > > > > Aside from some VF and S-B layers, there may be clear resin layers and layers with other single substances like turmeric, sindhooram, or other powder mixes.
                                > > > > > > > > > > >
                                > > > > > > > > > > > The aluminum i'm using is in small chips that pack densely. I pour first, then sprinkle on the aluminum, and heap it up in the center.
                                > > > > > > > > > > > (If instead you put a bunch of dense shavings into the mold first, then pour, you will probably end up with unsightly air pockets on the surface of the cone.) I just did the last pour on such a unit that is mostly dense aluminum with a few small things inserted.
                                > > > > > > > > > > >
                                > > > > > > > > > > > You will probably be guided to put a lot of the rocks and other objects along the periphery and maybe the flat bottom of cone, and mainly aluminum (or resin in the case you use the red & green stones) in the center and top portions. This is unusual, but go with it.
                                > > > > > > > > > > >
                                > > > > > > > > > > > What sets these cones apart is the wider angle and the pgms that go into the aluminum (or jasper and aventurine).
                                > > > > > > > > > > > These weapons are enormously crispy and have already gone far to calm down a lot of evil attack energies. These are like Power Wands on steroids, using only cheap ingredients.
                                > > > > > > > > > > >
                                > > > > > > > > > > > These are the 2 first ones i made, that have the colored stones but very little aluminum.
                                > > > > > > > > > > > http://loohan.com/CombatCones.jpg
                                > > > > > > > > > > > The smaller one has maybe 1.5 cups of steel shavings, offset from center. If you use the colored stones insted of aluminum, and metal shavings used will likely be lopsidedly placed.
                                > > > > > > > > > > >
                                > > > > > > > > > > >
                                > > > > > > > > > > >
                                > > > > > > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                > > > > > > > > > > > >
                                > > > > > > > > > > > > Advance warning for crafters who have been working with The Committee:
                                > > > > > > > > > > > > Soon i will be posting info on how to make cone units that are superior remote weapons. There is no one way to make these. But there will be some guidelines to help you along.
                                > > > > > > > > > > > >
                                > > > > > > > > > > > > If you are able to, please acquire some of these excellent molds:
                                > > > > > > > > > > > > http://www.southernstates.com/catalog/p-5004-little-giant-poultry-feeder-cover-22lb.aspx
                                > > > > > > > > > > > > Little Giant Poultry Feeder Cover 22lb
                                > > > > > > > > > > > > SKU: 10030801
                                > > > > > > > > > > > > I bought one at a feed store for 2.79
                                > > > > > > > > > > > > Will get more next time.
                                > > > > > > > > > > > >
                                > > > > > > > > > > > > Otherwise, find or make some other large cone molds that are of a very shallow slope like this one or close to it.
                                > > > > > > > > > > > > If that's not feasible, get a big red 2-qt funnel of the type sold in stores all over the US for around $1. But don't go with a steeper mold than that.
                                > > > > > > > > > > > > http://www.digitalfrontiersuf.com/wp-content/images/red-funnel.jpg
                                > > > > > > > > > > > >
                                > > > > > > > > > > > > Also some preferably smallish jasper and green aventurine, like at least 1/2 pound of each, tumbled or rough for each cone.
                                > > > > > > > > > > > >
                                > > > > > > > > > > > > OR the same pgms can go into generous quantities of aluminum shavings. So if you have that, you don't need the rox.
                                > > > > > > > > > > > >
                                > > > > > > > > > > > > Also some small cheap magnets. Most any will do, but ideally, i recommend these Precision Craft:
                                > > > > > > > > > > > > http://www.hardwareandtools.com/Stanley-Hardware-N302-372-PrecisionCraft-by-Stanley-National-Assorted-Flexible-Shape-Magnets-Pack-Of-30-038613302372.html
                                > > > > > > > > > > > > I just paid 7.99 for these in a blister pack in the hardware store, and here they are selling them for 2.97!
                                > > > > > > > > > > > > Also there are, in similar blister packs, SKU N302-240 (which does not google well) and contains 6 ring magnets, as well as SKU N302-265, 8 discs. I recommend getting them all if they are handy at your local hardware store.
                                > > > > > > > > > > > >
                                > > > > > > > > > > > > Also some of the pink goo i mentioned here
                                > > > > > > > > > > > > http://loohan.com/otb38.htm
                                > > > > > > > > > > > >
                                > > > > > > > > > > >
                                > > > > > > > > > >
                                > > > > > > > > >
                                > > > > > > > >
                                > > > > > > >
                                > > > > > >
                                > > > > >
                                > > > >
                                > > >
                                > >
                                >
                              • loohon
                                To clarify something i mentioned in post 86 http://groups.yahoo.com/group/arcturan_technologies/message/86 THE COMBAT CONE PROGRAMS THAT USED TO REQUIRE
                                Message 15 of 18 , Oct 26, 2011
                                  To clarify something i mentioned in post 86
                                  http://groups.yahoo.com/group/arcturan_technologies/message/86

                                  THE "COMBAT CONE" PROGRAMS THAT USED TO REQUIRE CERTAIN STONES OR ALUMINUM SHAVINGS NO LONGER DO. At least, some powder mixes can substitute. That cone does have these pgms in at least 12 of its numerous layers. (I poured an awful lot of thin layers.)
                                  I think maybe 2 of the layers contained some of the fine aluminum powder. But not much. I think some aluminum, either shavings or the fine mesh stuff, is still required at this time.

                                  --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@...> wrote:
                                  >
                                  > OK, i built a base for that unit that will be getting the coil from the other one later.
                                  > One interesting thing about this base: it is largely composed of a few big chunks of sandstone i picked up off the ground. And all this rock is programmed with 1 pgm at this time: the Death Ray pgm mentioned in http://loohan.com/otb27c.htm on Oct. 21, '08:
                                  >
                                  > "September 21, '08: The death-ray program is something different. It is not compressible. It puts out a freq inimical to all life forms (I think) but has programming to ensure that it can only be used against evil beings. I have been using it a while now with no ill effect to myself, and plenty of ill effect to the enemies.
                                  >
                                  > "It requires a crystal approximately 1 cu. in. in displacement, either smoky, clear, or white quartz. Even quartzite is OK.
                                  > Each person can have up to 5 of these stones."
                                  >
                                  > There might be exceptions to the quantity limits rule for skilled crafters. I must have half a gallon of sandstone in there.
                                  >
                                  > This base also had little else other than resin mix. A few shavings and other odds and ends, but it was fairly simple to make.
                                  >
                                  > This unit kicks. I'll have a pic in a few days when i get coils on these things.
                                  > I also made a powerful base for the smaller of the 2 aluminum cones i made a while back.
                                  >
                                  >
                                  >
                                  >
                                  > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                  > >
                                  > > It's funny how they started working a lot harder after i uploaded the pic.
                                  > > I just realized, all these Combat Cones i've been making also have at least 2 copies of the Grid Pgm... so now they are working over the internet.
                                  > >
                                  > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                  > > >
                                  > > > http://loohan.com/CombatCones9.11.jpg
                                  > > > That's the new 6.
                                  > > >
                                  > > > Change in plans. Now it looks like only the one on the right will get a base. The reason the big ones may not, is because it limits the coil space. The big unit Antuvozy has been making a coil for, well, i have to use a lot of force now to get the coil in place. And now she wants to make that coil a lot fatter.
                                  > > > So now she's designing a base for the cone on the right, that will go well with the coil.
                                  > > >
                                  > > > Then we will make a thinner coil to replace the one we took off.
                                  > > >
                                  > > > Also the 2 smaller ones that were made with CHIF003 funnels have fat stems because i used cylindrical molds on the stems and re-poured after the cones were already out of the funnels.
                                  > > >
                                  > > > These all really rip.
                                  > > >
                                  > > > BTW another thing to get is an assortment of machine screws or stove bolts with their nuts and maybe a few washers. I used a fair bit of those as well as some stainless steel screws.
                                  > > >
                                  > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                  > > > >
                                  > > > > I'll have pix in a couple days. The 6 new cones are nearly complete.
                                  > > > > In fact i put one on my Product page:
                                  > > > > http://loohan.com/CombatConeA1.jpg
                                  > > > >
                                  > > > > In this batch, i did use some aluminum powder, but it was always a lesser ingredient mixed with other stuff.
                                  > > > >
                                  > > > > I also used some aluminum shavings and copper shavings. And capacitors. And other stuff.
                                  > > > >
                                  > > > > Usually very thick ad hoc mixes again. A couple of these weird mixes got the Strontium-Barium pgm!
                                  > > > > Also used a lot of tulsi powder, and not always for the VF formula.
                                  > > > >
                                  > > > > I noticed the same vendor i got the aluminum from also sells cobalt carbonate. Which is pricey as powders go. I also used a fair bit of that stuff and will order more.
                                  > > > >
                                  > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                  > > > > >
                                  > > > > > I went to a different feed store. This one did not have the feeder cones, but did have the big orange ones for 3.95 instead on the 5.99 the satanist-owned store in Marshall charges.
                                  > > > > > These also had identification on them: CHIF004. However, this does not come up in google.
                                  > > > > > I bought a couple more. I'm a serious conehead.
                                  > > > > > Sometime i'll make one with a copper pipe sticking out the top, for blasting bad stuff in the sky.
                                  > > > > >
                                  > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                  > > > > > >
                                  > > > > > > Went back to the feed store but they only had 1 more of those cool feeder molds. Bought it. Also they have those big orange cones like in
                                  > > > > > > this pic.
                                  > > > > > > http://loohan.com/CombatCones.jpg
                                  > > > > > > So i got another one. They are $6 but good quality for many uses. Proudly crafted in the Orient.
                                  > > > > > >
                                  > > > > > > Also i have 2 of these funnels i had gotten at the feed store:
                                  > > > > > > http://www.igetmore4less.com/images/CHIF0003.jpg
                                  > > > > > > They can be found on a websearch of CHIF0003
                                  > > > > > > I get these are good for Combat Cones too.
                                  > > > > > >
                                  > > > > > > So now i started a batch of 6: 2 of each of these types of molds.
                                  > > > > > >
                                  > > > > > > Also i got my aluminum powder today.
                                  > > > > > > And they had me mix some into a larger amount of silica, and add a fair bit of the cobalt carbonate to this. I will be using this mix soon.
                                  > > > > > > I suspect this is not the only way i will be mixing aluminum powder into these cones, but i do suspect the cobalt carbonate will always be mixed into the aluminum. Maybe not always silica.
                                  > > > > > >
                                  > > > > > > Right now they have only had me pour straight cobalt carbonate in epoxy into the tips of these 6 cones.
                                  > > > > > >
                                  > > > > > > Caution, TOXICITY: aluminum this fine is probably absorbed thru the skin. Hulda Clark claimed that one absorbs aluminum even just touching lawn chairs etc.
                                  > > > > > > Also cobalt carbonate is toxic.
                                  > > > > > > Always use caution, gloves, and a dust mask when handling such powders. Don't get into eyes.
                                  > > > > > >
                                  > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                  > > > > > > >
                                  > > > > > > > http://loohan.com/CombatConeDisk1.jpg
                                  > > > > > > > Right now it is not yet fully programmed.
                                  > > > > > > >
                                  > > > > > > > Maybe someday i'll rub it with fine steel wool or something to get an aesthetic matte finish. Or maybe a coarse rubbing compound. The glossiness is a bit garish.
                                  > > > > > > >
                                  > > > > > > > This massive disk is PACKED. Unlike much of my contemporary stuff, it is practically wall-to-wall rocks and metal in there. Heavy.
                                  > > > > > > >
                                  > > > > > > > A few notes about the disk base:
                                  > > > > > > > --Very dense powder mixes for the most part. Almost 1# of turmeric powder in there, for instance. Some of it used straight, the rest mixed with other ingredients like fine silica. I made many unique powder mixes ad hoc for this.
                                  > > > > > > > --Lotsa capacitors as i already mentioned.
                                  > > > > > > > --Does contain some aluminum shaving with the same pgms as go into the aluminum cones.
                                  > > > > > > > --Also a couple dozen green aventurine tumbled stones that got the 2 special pgms that go into those. I.e. this base had a lot of programming that the base by itself could not use because the pgms require the broad cone shape to be effective.
                                  > > > > > > > --Some of those cheap magnets and some stainless steel screws. A few coils. Almost a whole tube of the Rose goo.
                                  > > > > > > >
                                  > > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                  > > > > > > > >
                                  > > > > > > > > http://loohan.com/CombatConeAluminum2.jpg
                                  > > > > > > > > My latest.
                                  > > > > > > > >
                                  > > > > > > > > Now i am working on a base for the 1st one i made of that shape with the big orange funnel mold.
                                  > > > > > > > > Often i like to re-cast cones in disks.
                                  > > > > > > > > In this shape, i have been guided to use quite a bunch of capacitors. Luckily a friend had sent me bags full.
                                  > > > > > > > > Also i put in a few resistors of various strengths.
                                  > > > > > > > > The disk base i'm working on has dozens of capacitors too.
                                  > > > > > > > >
                                  > > > > > > > > I doubt i will make any more of these aluminum-heavy ones. I plan to make a bunch more cones when my aluminum powder gets here.
                                  > > > > > > > > Each one significantly suppresses the evil energies.
                                  > > > > > > > >
                                  > > > > > > > > I am a bit puzzled: it only takes a pound or so of the jasper/aventurine to make a cone, yet many pounds of aluminum shavings to replace these.
                                  > > > > > > > > Most of the programming in the shavings is a 4th pgm, which is also present to a lesser extent in the jasper/aventurine cones.
                                  > > > > > > > > Apparently this 4th pgm is necessary to make the aluminum units work well.
                                  > > > > > > > > However both types seem to be about just as good overall.
                                  > > > > > > > >
                                  > > > > > > > >
                                  > > > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                  > > > > > > > > >
                                  > > > > > > > > > Forgot to mention, that sexy pastel lavender stuff is cobalt carbonate i got from Bailey clay supplies like 2 years ago, and this is the first time The C had me open the bag.
                                  > > > > > > > > > There is a pgm that is kind of good for these cones that goes into cobalt carbonate mixed into resin.
                                  > > > > > > > > > Some resins might alter the color, i don't know.
                                  > > > > > > > > >
                                  > > > > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                  > > > > > > > > > >
                                  > > > > > > > > > > CombatConeAluminum1.jpg
                                  > > > > > > > > > >
                                  > > > > > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                  > > > > > > > > > > >
                                  > > > > > > > > > > > Aluminum powder:
                                  > > > > > > > > > > > It occurred to me today that this would be good to augment fluffy aluminum shavings or substitute for them entirely.
                                  > > > > > > > > > > > I am most attracted to the 3000 mesh, which is more expensive.
                                  > > > > > > > > > > > I just ordered 2#
                                  > > > > > > > > > > > http://www.ebay.com/itm/2-lb-Aluminum-Powder-5-3000-Mesh-Super-Fine-/370468750296?pt=LH_DefaultDomain_0&hash=item5641a883d8
                                  > > > > > > > > > > > He also has 1# and 5# lots.
                                  > > > > > > > > > > >
                                  > > > > > > > > > > > Vaguely, i think that 3oz might be enough to sub entirely for the shavings if one had none. That's in the recommended cone mold.
                                  > > > > > > > > > > > Which seems a bit strange as i have been packing these 2 cones i've been working on with pounds of chips.
                                  > > > > > > > > > > > Probably the fine powder would change the resin such that it would then take the aluminum programs itself.
                                  > > > > > > > > > > > I suspect 3000 mesh is necessary to get the resin to work that way.
                                  > > > > > > > > > > >
                                  > > > > > > > > > > > BTW there are 3 distinct special pgms that go with these cones to make them so effective (but would not work in other shapes). 2 of these go into green aventurine, and the other goes into red jasper.
                                  > > > > > > > > > > > Alternatively all 3 go into heaps of aluminum or, i'm getting, resin with this fine powder in it.
                                  > > > > > > > > > > >
                                  > > > > > > > > > > > Eventually i would like to work out a "standard recipe" that anyone could follow to make these things, even if they lacked intuitived sensitivity.
                                  > > > > > > > > > > > With these weapons we can fry the nazis so hard...
                                  > > > > > > > > > > >
                                  > > > > > > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                  > > > > > > > > > > > >
                                  > > > > > > > > > > > > Feels like someone in Europe already made a nice crispy one.
                                  > > > > > > > > > > > >
                                  > > > > > > > > > > > > You may also need a cup or 2 of small, cheap quartz crystals/shards.
                                  > > > > > > > > > > > > Of course the S-B and VF mixes (and S-B can now be done with cocoa only; see http://loohan.com/otb33summary.htm )
                                  > > > > > > > > > > > > As well as the usual bric-a-brac if you have it. Maybe an occasional coil of some sort. But even with limited variety of ingredients one should be able to make something good.
                                  > > > > > > > > > > > >
                                  > > > > > > > > > > > > The key things seem to be
                                  > > > > > > > > > > > > -- as wide and shallow a cone as feasible
                                  > > > > > > > > > > > > -- lots of aluminum shavings, unless you have the jasper and aventurine. That's RED jasper, BTW.
                                  > > > > > > > > > > > > This is to hold the special pgms.
                                  > > > > > > > > > > > >
                                  > > > > > > > > > > > > This alone, with some cheap magnets and a bit of quartz, will probably make something pretty impressive.
                                  > > > > > > > > > > > > Aside from some VF and S-B layers, there may be clear resin layers and layers with other single substances like turmeric, sindhooram, or other powder mixes.
                                  > > > > > > > > > > > >
                                  > > > > > > > > > > > > The aluminum i'm using is in small chips that pack densely. I pour first, then sprinkle on the aluminum, and heap it up in the center.
                                  > > > > > > > > > > > > (If instead you put a bunch of dense shavings into the mold first, then pour, you will probably end up with unsightly air pockets on the surface of the cone.) I just did the last pour on such a unit that is mostly dense aluminum with a few small things inserted.
                                  > > > > > > > > > > > >
                                  > > > > > > > > > > > > You will probably be guided to put a lot of the rocks and other objects along the periphery and maybe the flat bottom of cone, and mainly aluminum (or resin in the case you use the red & green stones) in the center and top portions. This is unusual, but go with it.
                                  > > > > > > > > > > > >
                                  > > > > > > > > > > > > What sets these cones apart is the wider angle and the pgms that go into the aluminum (or jasper and aventurine).
                                  > > > > > > > > > > > > These weapons are enormously crispy and have already gone far to calm down a lot of evil attack energies. These are like Power Wands on steroids, using only cheap ingredients.
                                  > > > > > > > > > > > >
                                  > > > > > > > > > > > > These are the 2 first ones i made, that have the colored stones but very little aluminum.
                                  > > > > > > > > > > > > http://loohan.com/CombatCones.jpg
                                  > > > > > > > > > > > > The smaller one has maybe 1.5 cups of steel shavings, offset from center. If you use the colored stones insted of aluminum, and metal shavings used will likely be lopsidedly placed.
                                  > > > > > > > > > > > >
                                  > > > > > > > > > > > >
                                  > > > > > > > > > > > >
                                  > > > > > > > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                  > > > > > > > > > > > > >
                                  > > > > > > > > > > > > > Advance warning for crafters who have been working with The Committee:
                                  > > > > > > > > > > > > > Soon i will be posting info on how to make cone units that are superior remote weapons. There is no one way to make these. But there will be some guidelines to help you along.
                                  > > > > > > > > > > > > >
                                  > > > > > > > > > > > > > If you are able to, please acquire some of these excellent molds:
                                  > > > > > > > > > > > > > http://www.southernstates.com/catalog/p-5004-little-giant-poultry-feeder-cover-22lb.aspx
                                  > > > > > > > > > > > > > Little Giant Poultry Feeder Cover 22lb
                                  > > > > > > > > > > > > > SKU: 10030801
                                  > > > > > > > > > > > > > I bought one at a feed store for 2.79
                                  > > > > > > > > > > > > > Will get more next time.
                                  > > > > > > > > > > > > >
                                  > > > > > > > > > > > > > Otherwise, find or make some other large cone molds that are of a very shallow slope like this one or close to it.
                                  > > > > > > > > > > > > > If that's not feasible, get a big red 2-qt funnel of the type sold in stores all over the US for around $1. But don't go with a steeper mold than that.
                                  > > > > > > > > > > > > > http://www.digitalfrontiersuf.com/wp-content/images/red-funnel.jpg
                                  > > > > > > > > > > > > >
                                  > > > > > > > > > > > > > Also some preferably smallish jasper and green aventurine, like at least 1/2 pound of each, tumbled or rough for each cone.
                                  > > > > > > > > > > > > >
                                  > > > > > > > > > > > > > OR the same pgms can go into generous quantities of aluminum shavings. So if you have that, you don't need the rox.
                                  > > > > > > > > > > > > >
                                  > > > > > > > > > > > > > Also some small cheap magnets. Most any will do, but ideally, i recommend these Precision Craft:
                                  > > > > > > > > > > > > > http://www.hardwareandtools.com/Stanley-Hardware-N302-372-PrecisionCraft-by-Stanley-National-Assorted-Flexible-Shape-Magnets-Pack-Of-30-038613302372.html
                                  > > > > > > > > > > > > > I just paid 7.99 for these in a blister pack in the hardware store, and here they are selling them for 2.97!
                                  > > > > > > > > > > > > > Also there are, in similar blister packs, SKU N302-240 (which does not google well) and contains 6 ring magnets, as well as SKU N302-265, 8 discs. I recommend getting them all if they are handy at your local hardware store.
                                  > > > > > > > > > > > > >
                                  > > > > > > > > > > > > > Also some of the pink goo i mentioned here
                                  > > > > > > > > > > > > > http://loohan.com/otb38.htm
                                  > > > > > > > > > > > > >
                                  > > > > > > > > > > > >
                                  > > > > > > > > > > >
                                  > > > > > > > > > >
                                  > > > > > > > > >
                                  > > > > > > > >
                                  > > > > > > >
                                  > > > > > >
                                  > > > > >
                                  > > > >
                                  > > >
                                  > >
                                  >
                                • loohon
                                  Actually, i did put some aluminum shavings and a quartzite in the tip of the cone, i remembered. Also you don t want to fill mold all the way. I stopped at
                                  Message 16 of 18 , Oct 27, 2011
                                    Actually, i did put some aluminum shavings and a quartzite in the tip of the cone, i remembered.

                                    Also you don't want to fill mold all the way. I stopped at least 1/8" shy of top so that one can break the mold loose.
                                    I did spull it away all around at the bottom, and smack the bottom gently against a hard floor, but it was hanging up in the nipple end. Even though the epoxy there was well-cured by then.
                                    So i stuck the whole thing in the big freezer at work for a few hours to make the epoxy shrink slightly, then warmed the tip in warm water for a minute to cause the mold to expand there. Then smacked the bottom on a hard floor and it separated neatly without damaging the mold.

                                    It may be necessary first to file away any mushroom edge on top of the tip. I use duct tape over the tip and sometimes a bit of epoxy will ooze slightly over the tip.

                                    --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@...> wrote:
                                    >
                                    > To clarify something i mentioned in post 86
                                    > http://groups.yahoo.com/group/arcturan_technologies/message/86
                                    >
                                    > THE "COMBAT CONE" PROGRAMS THAT USED TO REQUIRE CERTAIN STONES OR ALUMINUM SHAVINGS NO LONGER DO. At least, some powder mixes can substitute. That cone does have these pgms in at least 12 of its numerous layers. (I poured an awful lot of thin layers.)
                                    > I think maybe 2 of the layers contained some of the fine aluminum powder. But not much. I think some aluminum, either shavings or the fine mesh stuff, is still required at this time.
                                    >
                                    > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                    > >
                                    > > OK, i built a base for that unit that will be getting the coil from the other one later.
                                    > > One interesting thing about this base: it is largely composed of a few big chunks of sandstone i picked up off the ground. And all this rock is programmed with 1 pgm at this time: the Death Ray pgm mentioned in http://loohan.com/otb27c.htm on Oct. 21, '08:
                                    > >
                                    > > "September 21, '08: The death-ray program is something different. It is not compressible. It puts out a freq inimical to all life forms (I think) but has programming to ensure that it can only be used against evil beings. I have been using it a while now with no ill effect to myself, and plenty of ill effect to the enemies.
                                    > >
                                    > > "It requires a crystal approximately 1 cu. in. in displacement, either smoky, clear, or white quartz. Even quartzite is OK.
                                    > > Each person can have up to 5 of these stones."
                                    > >
                                    > > There might be exceptions to the quantity limits rule for skilled crafters. I must have half a gallon of sandstone in there.
                                    > >
                                    > > This base also had little else other than resin mix. A few shavings and other odds and ends, but it was fairly simple to make.
                                    > >
                                    > > This unit kicks. I'll have a pic in a few days when i get coils on these things.
                                    > > I also made a powerful base for the smaller of the 2 aluminum cones i made a while back.
                                    > >
                                    > >
                                    > >
                                    > >
                                    > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                    > > >
                                    > > > It's funny how they started working a lot harder after i uploaded the pic.
                                    > > > I just realized, all these Combat Cones i've been making also have at least 2 copies of the Grid Pgm... so now they are working over the internet.
                                    > > >
                                    > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                    > > > >
                                    > > > > http://loohan.com/CombatCones9.11.jpg
                                    > > > > That's the new 6.
                                    > > > >
                                    > > > > Change in plans. Now it looks like only the one on the right will get a base. The reason the big ones may not, is because it limits the coil space. The big unit Antuvozy has been making a coil for, well, i have to use a lot of force now to get the coil in place. And now she wants to make that coil a lot fatter.
                                    > > > > So now she's designing a base for the cone on the right, that will go well with the coil.
                                    > > > >
                                    > > > > Then we will make a thinner coil to replace the one we took off.
                                    > > > >
                                    > > > > Also the 2 smaller ones that were made with CHIF003 funnels have fat stems because i used cylindrical molds on the stems and re-poured after the cones were already out of the funnels.
                                    > > > >
                                    > > > > These all really rip.
                                    > > > >
                                    > > > > BTW another thing to get is an assortment of machine screws or stove bolts with their nuts and maybe a few washers. I used a fair bit of those as well as some stainless steel screws.
                                    > > > >
                                    > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                    > > > > >
                                    > > > > > I'll have pix in a couple days. The 6 new cones are nearly complete.
                                    > > > > > In fact i put one on my Product page:
                                    > > > > > http://loohan.com/CombatConeA1.jpg
                                    > > > > >
                                    > > > > > In this batch, i did use some aluminum powder, but it was always a lesser ingredient mixed with other stuff.
                                    > > > > >
                                    > > > > > I also used some aluminum shavings and copper shavings. And capacitors. And other stuff.
                                    > > > > >
                                    > > > > > Usually very thick ad hoc mixes again. A couple of these weird mixes got the Strontium-Barium pgm!
                                    > > > > > Also used a lot of tulsi powder, and not always for the VF formula.
                                    > > > > >
                                    > > > > > I noticed the same vendor i got the aluminum from also sells cobalt carbonate. Which is pricey as powders go. I also used a fair bit of that stuff and will order more.
                                    > > > > >
                                    > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                    > > > > > >
                                    > > > > > > I went to a different feed store. This one did not have the feeder cones, but did have the big orange ones for 3.95 instead on the 5.99 the satanist-owned store in Marshall charges.
                                    > > > > > > These also had identification on them: CHIF004. However, this does not come up in google.
                                    > > > > > > I bought a couple more. I'm a serious conehead.
                                    > > > > > > Sometime i'll make one with a copper pipe sticking out the top, for blasting bad stuff in the sky.
                                    > > > > > >
                                    > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                    > > > > > > >
                                    > > > > > > > Went back to the feed store but they only had 1 more of those cool feeder molds. Bought it. Also they have those big orange cones like in
                                    > > > > > > > this pic.
                                    > > > > > > > http://loohan.com/CombatCones.jpg
                                    > > > > > > > So i got another one. They are $6 but good quality for many uses. Proudly crafted in the Orient.
                                    > > > > > > >
                                    > > > > > > > Also i have 2 of these funnels i had gotten at the feed store:
                                    > > > > > > > http://www.igetmore4less.com/images/CHIF0003.jpg
                                    > > > > > > > They can be found on a websearch of CHIF0003
                                    > > > > > > > I get these are good for Combat Cones too.
                                    > > > > > > >
                                    > > > > > > > So now i started a batch of 6: 2 of each of these types of molds.
                                    > > > > > > >
                                    > > > > > > > Also i got my aluminum powder today.
                                    > > > > > > > And they had me mix some into a larger amount of silica, and add a fair bit of the cobalt carbonate to this. I will be using this mix soon.
                                    > > > > > > > I suspect this is not the only way i will be mixing aluminum powder into these cones, but i do suspect the cobalt carbonate will always be mixed into the aluminum. Maybe not always silica.
                                    > > > > > > >
                                    > > > > > > > Right now they have only had me pour straight cobalt carbonate in epoxy into the tips of these 6 cones.
                                    > > > > > > >
                                    > > > > > > > Caution, TOXICITY: aluminum this fine is probably absorbed thru the skin. Hulda Clark claimed that one absorbs aluminum even just touching lawn chairs etc.
                                    > > > > > > > Also cobalt carbonate is toxic.
                                    > > > > > > > Always use caution, gloves, and a dust mask when handling such powders. Don't get into eyes.
                                    > > > > > > >
                                    > > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                    > > > > > > > >
                                    > > > > > > > > http://loohan.com/CombatConeDisk1.jpg
                                    > > > > > > > > Right now it is not yet fully programmed.
                                    > > > > > > > >
                                    > > > > > > > > Maybe someday i'll rub it with fine steel wool or something to get an aesthetic matte finish. Or maybe a coarse rubbing compound. The glossiness is a bit garish.
                                    > > > > > > > >
                                    > > > > > > > > This massive disk is PACKED. Unlike much of my contemporary stuff, it is practically wall-to-wall rocks and metal in there. Heavy.
                                    > > > > > > > >
                                    > > > > > > > > A few notes about the disk base:
                                    > > > > > > > > --Very dense powder mixes for the most part. Almost 1# of turmeric powder in there, for instance. Some of it used straight, the rest mixed with other ingredients like fine silica. I made many unique powder mixes ad hoc for this.
                                    > > > > > > > > --Lotsa capacitors as i already mentioned.
                                    > > > > > > > > --Does contain some aluminum shaving with the same pgms as go into the aluminum cones.
                                    > > > > > > > > --Also a couple dozen green aventurine tumbled stones that got the 2 special pgms that go into those. I.e. this base had a lot of programming that the base by itself could not use because the pgms require the broad cone shape to be effective.
                                    > > > > > > > > --Some of those cheap magnets and some stainless steel screws. A few coils. Almost a whole tube of the Rose goo.
                                    > > > > > > > >
                                    > > > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                    > > > > > > > > >
                                    > > > > > > > > > http://loohan.com/CombatConeAluminum2.jpg
                                    > > > > > > > > > My latest.
                                    > > > > > > > > >
                                    > > > > > > > > > Now i am working on a base for the 1st one i made of that shape with the big orange funnel mold.
                                    > > > > > > > > > Often i like to re-cast cones in disks.
                                    > > > > > > > > > In this shape, i have been guided to use quite a bunch of capacitors. Luckily a friend had sent me bags full.
                                    > > > > > > > > > Also i put in a few resistors of various strengths.
                                    > > > > > > > > > The disk base i'm working on has dozens of capacitors too.
                                    > > > > > > > > >
                                    > > > > > > > > > I doubt i will make any more of these aluminum-heavy ones. I plan to make a bunch more cones when my aluminum powder gets here.
                                    > > > > > > > > > Each one significantly suppresses the evil energies.
                                    > > > > > > > > >
                                    > > > > > > > > > I am a bit puzzled: it only takes a pound or so of the jasper/aventurine to make a cone, yet many pounds of aluminum shavings to replace these.
                                    > > > > > > > > > Most of the programming in the shavings is a 4th pgm, which is also present to a lesser extent in the jasper/aventurine cones.
                                    > > > > > > > > > Apparently this 4th pgm is necessary to make the aluminum units work well.
                                    > > > > > > > > > However both types seem to be about just as good overall.
                                    > > > > > > > > >
                                    > > > > > > > > >
                                    > > > > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                    > > > > > > > > > >
                                    > > > > > > > > > > Forgot to mention, that sexy pastel lavender stuff is cobalt carbonate i got from Bailey clay supplies like 2 years ago, and this is the first time The C had me open the bag.
                                    > > > > > > > > > > There is a pgm that is kind of good for these cones that goes into cobalt carbonate mixed into resin.
                                    > > > > > > > > > > Some resins might alter the color, i don't know.
                                    > > > > > > > > > >
                                    > > > > > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                    > > > > > > > > > > >
                                    > > > > > > > > > > > CombatConeAluminum1.jpg
                                    > > > > > > > > > > >
                                    > > > > > > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                    > > > > > > > > > > > >
                                    > > > > > > > > > > > > Aluminum powder:
                                    > > > > > > > > > > > > It occurred to me today that this would be good to augment fluffy aluminum shavings or substitute for them entirely.
                                    > > > > > > > > > > > > I am most attracted to the 3000 mesh, which is more expensive.
                                    > > > > > > > > > > > > I just ordered 2#
                                    > > > > > > > > > > > > http://www.ebay.com/itm/2-lb-Aluminum-Powder-5-3000-Mesh-Super-Fine-/370468750296?pt=LH_DefaultDomain_0&hash=item5641a883d8
                                    > > > > > > > > > > > > He also has 1# and 5# lots.
                                    > > > > > > > > > > > >
                                    > > > > > > > > > > > > Vaguely, i think that 3oz might be enough to sub entirely for the shavings if one had none. That's in the recommended cone mold.
                                    > > > > > > > > > > > > Which seems a bit strange as i have been packing these 2 cones i've been working on with pounds of chips.
                                    > > > > > > > > > > > > Probably the fine powder would change the resin such that it would then take the aluminum programs itself.
                                    > > > > > > > > > > > > I suspect 3000 mesh is necessary to get the resin to work that way.
                                    > > > > > > > > > > > >
                                    > > > > > > > > > > > > BTW there are 3 distinct special pgms that go with these cones to make them so effective (but would not work in other shapes). 2 of these go into green aventurine, and the other goes into red jasper.
                                    > > > > > > > > > > > > Alternatively all 3 go into heaps of aluminum or, i'm getting, resin with this fine powder in it.
                                    > > > > > > > > > > > >
                                    > > > > > > > > > > > > Eventually i would like to work out a "standard recipe" that anyone could follow to make these things, even if they lacked intuitived sensitivity.
                                    > > > > > > > > > > > > With these weapons we can fry the nazis so hard...
                                    > > > > > > > > > > > >
                                    > > > > > > > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                    > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > Feels like someone in Europe already made a nice crispy one.
                                    > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > You may also need a cup or 2 of small, cheap quartz crystals/shards.
                                    > > > > > > > > > > > > > Of course the S-B and VF mixes (and S-B can now be done with cocoa only; see http://loohan.com/otb33summary.htm )
                                    > > > > > > > > > > > > > As well as the usual bric-a-brac if you have it. Maybe an occasional coil of some sort. But even with limited variety of ingredients one should be able to make something good.
                                    > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > The key things seem to be
                                    > > > > > > > > > > > > > -- as wide and shallow a cone as feasible
                                    > > > > > > > > > > > > > -- lots of aluminum shavings, unless you have the jasper and aventurine. That's RED jasper, BTW.
                                    > > > > > > > > > > > > > This is to hold the special pgms.
                                    > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > This alone, with some cheap magnets and a bit of quartz, will probably make something pretty impressive.
                                    > > > > > > > > > > > > > Aside from some VF and S-B layers, there may be clear resin layers and layers with other single substances like turmeric, sindhooram, or other powder mixes.
                                    > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > The aluminum i'm using is in small chips that pack densely. I pour first, then sprinkle on the aluminum, and heap it up in the center.
                                    > > > > > > > > > > > > > (If instead you put a bunch of dense shavings into the mold first, then pour, you will probably end up with unsightly air pockets on the surface of the cone.) I just did the last pour on such a unit that is mostly dense aluminum with a few small things inserted.
                                    > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > You will probably be guided to put a lot of the rocks and other objects along the periphery and maybe the flat bottom of cone, and mainly aluminum (or resin in the case you use the red & green stones) in the center and top portions. This is unusual, but go with it.
                                    > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > What sets these cones apart is the wider angle and the pgms that go into the aluminum (or jasper and aventurine).
                                    > > > > > > > > > > > > > These weapons are enormously crispy and have already gone far to calm down a lot of evil attack energies. These are like Power Wands on steroids, using only cheap ingredients.
                                    > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > These are the 2 first ones i made, that have the colored stones but very little aluminum.
                                    > > > > > > > > > > > > > http://loohan.com/CombatCones.jpg
                                    > > > > > > > > > > > > > The smaller one has maybe 1.5 cups of steel shavings, offset from center. If you use the colored stones insted of aluminum, and metal shavings used will likely be lopsidedly placed.
                                    > > > > > > > > > > > > >
                                    > > > > > > > > > > > > >
                                    > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                    > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > > Advance warning for crafters who have been working with The Committee:
                                    > > > > > > > > > > > > > > Soon i will be posting info on how to make cone units that are superior remote weapons. There is no one way to make these. But there will be some guidelines to help you along.
                                    > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > > If you are able to, please acquire some of these excellent molds:
                                    > > > > > > > > > > > > > > http://www.southernstates.com/catalog/p-5004-little-giant-poultry-feeder-cover-22lb.aspx
                                    > > > > > > > > > > > > > > Little Giant Poultry Feeder Cover 22lb
                                    > > > > > > > > > > > > > > SKU: 10030801
                                    > > > > > > > > > > > > > > I bought one at a feed store for 2.79
                                    > > > > > > > > > > > > > > Will get more next time.
                                    > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > > Otherwise, find or make some other large cone molds that are of a very shallow slope like this one or close to it.
                                    > > > > > > > > > > > > > > If that's not feasible, get a big red 2-qt funnel of the type sold in stores all over the US for around $1. But don't go with a steeper mold than that.
                                    > > > > > > > > > > > > > > http://www.digitalfrontiersuf.com/wp-content/images/red-funnel.jpg
                                    > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > > Also some preferably smallish jasper and green aventurine, like at least 1/2 pound of each, tumbled or rough for each cone.
                                    > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > > OR the same pgms can go into generous quantities of aluminum shavings. So if you have that, you don't need the rox.
                                    > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > > Also some small cheap magnets. Most any will do, but ideally, i recommend these Precision Craft:
                                    > > > > > > > > > > > > > > http://www.hardwareandtools.com/Stanley-Hardware-N302-372-PrecisionCraft-by-Stanley-National-Assorted-Flexible-Shape-Magnets-Pack-Of-30-038613302372.html
                                    > > > > > > > > > > > > > > I just paid 7.99 for these in a blister pack in the hardware store, and here they are selling them for 2.97!
                                    > > > > > > > > > > > > > > Also there are, in similar blister packs, SKU N302-240 (which does not google well) and contains 6 ring magnets, as well as SKU N302-265, 8 discs. I recommend getting them all if they are handy at your local hardware store.
                                    > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > > Also some of the pink goo i mentioned here
                                    > > > > > > > > > > > > > > http://loohan.com/otb38.htm
                                    > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > >
                                    > > > > > > > > > > > >
                                    > > > > > > > > > > >
                                    > > > > > > > > > >
                                    > > > > > > > > >
                                    > > > > > > > >
                                    > > > > > > >
                                    > > > > > >
                                    > > > > >
                                    > > > >
                                    > > >
                                    > >
                                    >
                                  • loohon
                                    Doh! That was supposed to be http://loohan.com/CombatConeAluminum1.jpg
                                    Message 17 of 18 , Sep 29, 2013
                                      Doh! That was supposed to be
                                      http://loohan.com/CombatConeAluminum1.jpg

                                      --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@...> wrote:
                                      >
                                      > CombatConeAluminum1.jpg
                                      >
                                      > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                      > >
                                      > > Aluminum powder:
                                      > > It occurred to me today that this would be good to augment fluffy aluminum shavings or substitute for them entirely.
                                      > > I am most attracted to the 3000 mesh, which is more expensive.
                                      > > I just ordered 2#
                                      > > http://www.ebay.com/itm/2-lb-Aluminum-Powder-5-3000-Mesh-Super-Fine-/370468750296?pt=LH_DefaultDomain_0&hash=item5641a883d8
                                      > > He also has 1# and 5# lots.
                                      > >
                                      > > Vaguely, i think that 3oz might be enough to sub entirely for the shavings if one had none. That's in the recommended cone mold.
                                      > > Which seems a bit strange as i have been packing these 2 cones i've been working on with pounds of chips.
                                      > > Probably the fine powder would change the resin such that it would then take the aluminum programs itself.
                                      > > I suspect 3000 mesh is necessary to get the resin to work that way.
                                      > >
                                      > > BTW there are 3 distinct special pgms that go with these cones to make them so effective (but would not work in other shapes). 2 of these go into green aventurine, and the other goes into red jasper.
                                      > > Alternatively all 3 go into heaps of aluminum or, i'm getting, resin with this fine powder in it.
                                      > >
                                      > > Eventually i would like to work out a "standard recipe" that anyone could follow to make these things, even if they lacked intuitived sensitivity.
                                      > > With these weapons we can fry the nazis so hard...
                                      > >
                                      > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                      > > >
                                      > > > Feels like someone in Europe already made a nice crispy one.
                                      > > >
                                      > > > You may also need a cup or 2 of small, cheap quartz crystals/shards.
                                      > > > Of course the S-B and VF mixes (and S-B can now be done with cocoa only; see http://loohan.com/otb33summary.htm )
                                      > > > As well as the usual bric-a-brac if you have it. Maybe an occasional coil of some sort. But even with limited variety of ingredients one should be able to make something good.
                                      > > >
                                      > > > The key things seem to be
                                      > > > -- as wide and shallow a cone as feasible
                                      > > > -- lots of aluminum shavings, unless you have the jasper and aventurine. That's RED jasper, BTW.
                                      > > > This is to hold the special pgms.
                                      > > >
                                      > > > This alone, with some cheap magnets and a bit of quartz, will probably make something pretty impressive.
                                      > > > Aside from some VF and S-B layers, there may be clear resin layers and layers with other single substances like turmeric, sindhooram, or other powder mixes.
                                      > > >
                                      > > > The aluminum i'm using is in small chips that pack densely. I pour first, then sprinkle on the aluminum, and heap it up in the center.
                                      > > > (If instead you put a bunch of dense shavings into the mold first, then pour, you will probably end up with unsightly air pockets on the surface of the cone.) I just did the last pour on such a unit that is mostly dense aluminum with a few small things inserted.
                                      > > >
                                      > > > You will probably be guided to put a lot of the rocks and other objects along the periphery and maybe the flat bottom of cone, and mainly aluminum (or resin in the case you use the red & green stones) in the center and top portions. This is unusual, but go with it.
                                      > > >
                                      > > > What sets these cones apart is the wider angle and the pgms that go into the aluminum (or jasper and aventurine).
                                      > > > These weapons are enormously crispy and have already gone far to calm down a lot of evil attack energies. These are like Power Wands on steroids, using only cheap ingredients.
                                      > > >
                                      > > > These are the 2 first ones i made, that have the colored stones but very little aluminum.
                                      > > > http://loohan.com/CombatCones.jpg
                                      > > > The smaller one has maybe 1.5 cups of steel shavings, offset from center. If you use the colored stones insted of aluminum, and metal shavings used will likely be lopsidedly placed.
                                      > > >
                                      > > >
                                      > > >
                                      > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                      > > > >
                                      > > > > Advance warning for crafters who have been working with The Committee:
                                      > > > > Soon i will be posting info on how to make cone units that are superior remote weapons. There is no one way to make these. But there will be some guidelines to help you along.
                                      > > > >
                                      > > > > If you are able to, please acquire some of these excellent molds:
                                      > > > > http://www.southernstates.com/catalog/p-5004-little-giant-poultry-feeder-cover-22lb.aspx
                                      > > > > Little Giant Poultry Feeder Cover 22lb
                                      > > > > SKU: 10030801
                                      > > > > I bought one at a feed store for 2.79
                                      > > > > Will get more next time.
                                      > > > >
                                      > > > > Otherwise, find or make some other large cone molds that are of a very shallow slope like this one or close to it.
                                      > > > > If that's not feasible, get a big red 2-qt funnel of the type sold in stores all over the US for around $1. But don't go with a steeper mold than that.
                                      > > > > http://www.digitalfrontiersuf.com/wp-content/images/red-funnel.jpg
                                      > > > >
                                      > > > > Also some preferably smallish jasper and green aventurine, like at least 1/2 pound of each, tumbled or rough for each cone.
                                      > > > >
                                      > > > > OR the same pgms can go into generous quantities of aluminum shavings. So if you have that, you don't need the rox.
                                      > > > >
                                      > > > > Also some small cheap magnets. Most any will do, but ideally, i recommend these Precision Craft:
                                      > > > > http://www.hardwareandtools.com/Stanley-Hardware-N302-372-PrecisionCraft-by-Stanley-National-Assorted-Flexible-Shape-Magnets-Pack-Of-30-038613302372.html
                                      > > > > I just paid 7.99 for these in a blister pack in the hardware store, and here they are selling them for 2.97!
                                      > > > > Also there are, in similar blister packs, SKU N302-240 (which does not google well) and contains 6 ring magnets, as well as SKU N302-265, 8 discs. I recommend getting them all if they are handy at your local hardware store.
                                      > > > >
                                      > > > > Also some of the pink goo i mentioned here
                                      > > > > http://loohan.com/otb38.htm
                                      > > > >
                                      > > >
                                      > >
                                      >
                                    • loohon
                                      Just a note on cobalt carbonate. I bought some from someone on eBay a couple years ago, but the color is not a rich bright shade of Pepto-Bismol like the stuff
                                      Message 18 of 18 , Oct 29, 2013

                                        Just a note on cobalt carbonate. I bought some from someone on eBay a couple years ago, but the color is not a rich bright shade of Pepto-Bismol like the stuff i got from Bailey.

                                        It is a muddy gray fleshtone kind of color instead. Just as good energyetically, but not aesthertically.



                                        ---In arcturan_technologies@yahoogroups.com, <arcturan_technologies@yahoogroups.com> wrote:

                                        Forgot to mention, that sexy pastel lavender stuff is cobalt carbonate i got from Bailey clay supplies like 2 years ago, and this is the first time The C had me open the bag.
                                        There is a pgm that is kind of good for these cones that goes into cobalt carbonate mixed into resin.
                                        Some resins might alter the color, i don't know.

                                        --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@...> wrote:
                                        >
                                        > CombatConeAluminum1.jpg
                                        >
                                        > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                        > >
                                        > > Aluminum powder:
                                        > > It occurred to me today that this would be good to augment fluffy aluminum shavings or substitute for them entirely.
                                        > > I am most attracted to the 3000 mesh, which is more expensive.
                                        > > I just ordered 2#
                                        > > http://www.ebay.com/itm/2-lb-Aluminum-Powder-5-3000-Mesh-Super-Fine-/370468750296?pt=LH_DefaultDomain_0&hash=item5641a883d8
                                        > > He also has 1# and 5# lots.
                                        > >
                                        > > Vaguely, i think that 3oz might be enough to sub entirely for the shavings if one had none. That's in the recommended cone mold.
                                        > > Which seems a bit strange as i have been packing these 2 cones i've been working on with pounds of chips.
                                        > > Probably the fine powder would change the resin such that it would then take the aluminum programs itself.
                                        > > I suspect 3000 mesh is necessary to get the resin to work that way.
                                        > >
                                        > > BTW there are 3 distinct special pgms that go with these cones to make them so effective (but would not work in other shapes). 2 of these go into green aventurine, and the other goes into red jasper.
                                        > > Alternatively all 3 go into heaps of aluminum or, i'm getting, resin with this fine powder in it.
                                        > >
                                        > > Eventually i would like to work out a "standard recipe" that anyone could follow to make these things, even if they lacked intuitived sensitivity.
                                        > > With these weapons we can fry the nazis so hard...
                                        > >
                                        > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                        > > >
                                        > > > Feels like someone in Europe already made a nice crispy one.
                                        > > >
                                        > > > You may also need a cup or 2 of small, cheap quartz crystals/shards.
                                        > > > Of course the S-B and VF mixes (and S-B can now be done with cocoa only; see http://loohan.com/otb33summary.htm )
                                        > > > As well as the usual bric-a-brac if you have it. Maybe an occasional coil of some sort. But even with limited variety of ingredients one should be able to make something good.
                                        > > >
                                        > > > The key things seem to be
                                        > > > -- as wide and shallow a cone as feasible
                                        > > > -- lots of aluminum shavings, unless you have the jasper and aventurine. That's RED jasper, BTW.
                                        > > > This is to hold the special pgms.
                                        > > >
                                        > > > This alone, with some cheap magnets and a bit of quartz, will probably make something pretty impressive.
                                        > > > Aside from some VF and S-B layers, there may be clear resin layers and layers with other single substances like turmeric, sindhooram, or other powder mixes.
                                        > > >
                                        > > > The aluminum i'm using is in small chips that pack densely. I pour first, then sprinkle on the aluminum, and heap it up in the center.
                                        > > > (If instead you put a bunch of dense shavings into the mold first, then pour, you will probably end up with unsightly air pockets on the surface of the cone.) I just did the last pour on such a unit that is mostly dense aluminum with a few small things inserted.
                                        > > >
                                        > > > You will probably be guided to put a lot of the rocks and other objects along the periphery and maybe the flat bottom of cone, and mainly aluminum (or resin in the case you use the red & green stones) in the center and top portions. This is unusual, but go with it.
                                        > > >
                                        > > > What sets these cones apart is the wider angle and the pgms that go into the aluminum (or jasper and aventurine).
                                        > > > These weapons are enormously crispy and have already gone far to calm down a lot of evil attack energies. These are like Power Wands on steroids, using only cheap ingredients.
                                        > > >
                                        > > > These are the 2 first ones i made, that have the colored stones but very little aluminum.
                                        > > > http://loohan.com/CombatCones.jpg
                                        > > > The smaller one has maybe 1.5 cups of steel shavings, offset from center. If you use the colored stones insted of aluminum, and metal shavings used will likely be lopsidedly placed.
                                        > > >
                                        > > >
                                        > > >
                                        > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
                                        > > > >
                                        > > > > Advance warning for crafters who have been working with The Committee:
                                        > > > > Soon i will be posting info on how to make cone units that are superior remote weapons. There is no one way to make these. But there will be some guidelines to help you along.
                                        > > > >
                                        > > > > If you are able to, please acquire some of these excellent molds:
                                        > > > > http://www.southernstates.com/catalog/p-5004-little-giant-poultry-feeder-cover-22lb.aspx
                                        > > > > Little Giant Poultry Feeder Cover 22lb
                                        > > > > SKU: 10030801
                                        > > > > I bought one at a feed store for 2.79
                                        > > > > Will get more next time.
                                        > > > >
                                        > > > > Otherwise, find or make some other large cone molds that are of a very shallow slope like this one or close to it.
                                        > > > > If that's not feasible, get a big red 2-qt funnel of the type sold in stores all over the US for around $1. But don't go with a steeper mold than that.
                                        > > > > http://www.digitalfrontiersuf.com/wp-content/images/red-funnel.jpg
                                        > > > >
                                        > > > > Also some preferably smallish jasper and green aventurine, like at least 1/2 pound of each, tumbled or rough for each cone.
                                        > > > >
                                        > > > > OR the same pgms can go into generous quantities of aluminum shavings. So if you have that, you don't need the rox.
                                        > > > >
                                        > > > > Also some small cheap magnets. Most any will do, but ideally, i recommend these Precision Craft:
                                        > > > > http://www.hardwareandtools.com/Stanley-Hardware-N302-372-PrecisionCraft-by-Stanley-National-Assorted-Flexible-Shape-Magnets-Pack-Of-30-038613302372.html
                                        > > > > I just paid 7.99 for these in a blister pack in the hardware store, and here they are selling them for 2.97!
                                        > > > > Also there are, in similar blister packs, SKU N302-240 (which does not google well) and contains 6 ring magnets, as well as SKU N302-265, 8 discs. I recommend getting them all if they are handy at your local hardware store.
                                        > > > >
                                        > > > > Also some of the pink goo i mentioned here
                                        > > > > http://loohan.com/otb38.htm
                                        > > > >
                                        > > >
                                        > >
                                        >
                                      Your message has been successfully submitted and would be delivered to recipients shortly.