http://www.loohan.com/magnetronic3.jpg
This is what i got so far in my remote wand booster.
My friend sent me another box, 100# of hardware, so now this setup contains 2 magnetrons, 2 transformers, 4 oil-filled capacitors, and all kinds of bric-a-brac cobbled together with aluminum tape and stuff.

I'm about to put this stuff into a big box. I doubt i will ever encase it all in resin. Probably just keep it in a box, mixed with some cast pieces. That way i can always easily modify or add to the components.

It's getting harder to dowse, but i think at present it's around 440,000X.
Once i get it boxed up it will probably be more potent.

--- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@...> wrote:
>
> http://loohan.com/magnetronic1.jpg
> What a difference a day makes. This is the unit that was on the left in yesterday's pic, considerably embellished with coils, crystals, etc.
> Also that thing lower right is an oil-filled capacitor, which is part of the setup. Eventually i will probably cast all this stuff in a bucket mold.
> That capacitor is also from a microwave oven. When dismantling an oven, be alert for various other components that also have a strong "scalar" vibe.
>
> Now i get that this pumps up my wand to over 8,300X its intrinsic power.
>
> --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
> >
> > http://loohan.com/magnetronic2.jpg
> > The unit on the right has not had much added to it. This is the one blasting my LHC. It is sitting on an orgone block.
> > The one on the left is the one feeding into my wand. They keep having me tape on more stuff. I get that now this thing has my wand boosted to 445X. And it still gets more stuff added now and then.
> > What did i add? A few epoxy ice cubes, a bunch of little capacitors, a few resistors...
> > Also they had me make a number of Lakhovsky coils and plain rings, and other coils out of stainless steel 19awg wire. I get this at the hardware store: National n264-705 v2567. This stuff takes some special programs and is worth having around if you work with this magnetron stuff and/or the "UFO decloaking tech" which is actually so much more than that.
> > They mostly had me use Shurtape, but sometimes i used regular duct tape.
> >
> > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
> > >
> > > Pix:
> > > http://tinyurl.com/9o6j34g
> > > All these different types seem to have comparable potential for passive (non-electrified) scalar weapons. They are pretty pricey new, though, and used is just as good.
> > >
> > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
> > > >
> > > > Correction: i meant Shurtape. Shurtape DC 181. I mentioned it in a recent post.
> > > >
> > > > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
> > > > >
> > > > > I linked to this pic in msg #126:
> > > > > http://loohan.com/rept-ripper.jpg
> > > > > Now they've got me going in a slightly different direction with these MW pieces. I have 2 similar metal things like this that someone sent me. The other one, i was guided to wrap a whole bunch of that Shurflo tape around in certain ways, then tape on a couple pieces of orgonite and a few other things. What does it do? Wild stuff. It remotely pumps intense anti-evil orgone into the piece on the left here
> > > > > http://loohan.com/perpendiculosis6c.jpg
> > > > > which is connected to the wand on the right by wires. So now the wand is 8X as powerful as it was a few days ago, and i'm still working on this.
> > > > > I get that as long as the MW piece is within 6000 miles of the wand piece, there will be no loss of energy in transmission.
> > > > >
> > > > > The other MW heart, which is the one in that 1st pic, has only had a fraction as much of the Shurflo tape wrapped around it, and not much else. It is pumping energy into this unit
> > > > > http://loohan.com/LHC.jpg
> > > > > making it 6X as strong.
> > > > > I get that the range for this one is 50' at this time.
> > > > >
> > > > > Both MW hearts are sitting on pieces of cast resin. Someday maybe i will encase them in resin, but no rush; something like this is likely to be added to as time goes on, gaining many-fold the power at each step.
> > > > > I'll probably have pix in a few days.
> > > > >
> > > >
> > >
> >
>

OK, i just dissected an Emerson MW oven i found in a dumpster. Here are the parts one wants to save for this work:
http://www.loohan.com/MW-parts.jpg

--- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@...> wrote:
>
> Pix:
> http://tinyurl.com/9o6j34g
> All these different types seem to have comparable potential for passive (non-electrified) scalar weapons. They are pretty pricey new, though, and used is just as good.
>
> --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
> >
> > Correction: i meant Shurtape. Shurtape DC 181. I mentioned it in a recent post.
> >
> > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
> > >
> > > I linked to this pic in msg #126:
> > > http://loohan.com/rept-ripper.jpg
> > > Now they've got me going in a slightly different direction with these MW pieces. I have 2 similar metal things like this that someone sent me. The other one, i was guided to wrap a whole bunch of that Shurflo tape around in certain ways, then tape on a couple pieces of orgonite and a few other things. What does it do? Wild stuff. It remotely pumps intense anti-evil orgone into the piece on the left here
> > > http://loohan.com/perpendiculosis6c.jpg
> > > which is connected to the wand on the right by wires. So now the wand is 8X as powerful as it was a few days ago, and i'm still working on this.
> > > I get that as long as the MW piece is within 6000 miles of the wand piece, there will be no loss of energy in transmission.
> > >
> > > The other MW heart, which is the one in that 1st pic, has only had a fraction as much of the Shurflo tape wrapped around it, and not much else. It is pumping energy into this unit
> > > http://loohan.com/LHC.jpg
> > > making it 6X as strong.
> > > I get that the range for this one is 50' at this time.
> > >
> > > Both MW hearts are sitting on pieces of cast resin. Someday maybe i will encase them in resin, but no rush; something like this is likely to be added to as time goes on, gaining many-fold the power at each step.
> > > I'll probably have pix in a few days.
> > >
> >
>

Weatherwar 101
http://www.youtube.com/user/WeatherWar101
says HAARP-type transmitters create an artificial plasma layer in the sky that manipulates clouds, if i understand correctly. And i get that several of my unconventional CB-like devices have been addressing this plasma stuff all along. Maybe positive orgone weakens it.
I especially get the feeling that (properly inspired and crafted) magnetron devices also vibe the piss out of this plasma layer.

I have made some more of my bizarre tape-wrapped items containing magnetrons in recent weeks, BTW.

--- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@...> wrote:
>
> Pix:
> http://tinyurl.com/9o6j34g
> All these different types seem to have comparable potential for passive (non-electrified) scalar weapons. They are pretty pricey new, though, and used is just as good.
>
> --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
> >
> > Correction: i meant Shurtape. Shurtape DC 181. I mentioned it in a recent post.
> >
> > --- In arcturan_technologies@yahoogroups.com, "loohon" <dogwood57@> wrote:
> > >
> > > I linked to this pic in msg #126:
> > > http://loohan.com/rept-ripper.jpg
> > > Now they've got me going in a slightly different direction with these MW pieces. I have 2 similar metal things like this that someone sent me. The other one, i was guided to wrap a whole bunch of that Shurflo tape around in certain ways, then tape on a couple pieces of orgonite and a few other things. What does it do? Wild stuff. It remotely pumps intense anti-evil orgone into the piece on the left here
> > > http://loohan.com/perpendiculosis6c.jpg
> > > which is connected to the wand on the right by wires. So now the wand is 8X as powerful as it was a few days ago, and i'm still working on this.
> > > I get that as long as the MW piece is within 6000 miles of the wand piece, there will be no loss of energy in transmission.
> > >
> > > The other MW heart, which is the one in that 1st pic, has only had a fraction as much of the Shurflo tape wrapped around it, and not much else. It is pumping energy into this unit
> > > http://loohan.com/LHC.jpg
> > > making it 6X as strong.
> > > I get that the range for this one is 50' at this time.
> > >
> > > Both MW hearts are sitting on pieces of cast resin. Someday maybe i will encase them in resin, but no rush; something like this is likely to be added to as time goes on, gaining many-fold the power at each step.
> > > I'll probably have pix in a few days.
> > >
> >
>