Loading ...
Sorry, an error occurred while loading the content.

Re: [aprsisce] Wish List

Expand Messages
  • Lynn W Deffenbaugh (Mr)
    Yep, disabled trace logs may contain some information that is forced into them by the code, but Enabled trace logs will typically show you LOTS more detail.
    Message 1 of 18 , Feb 27, 2011
    • 0 Attachment
      Yep, disabled trace logs may contain some information that is forced
      into them by the code, but Enabled trace logs will typically show you
      LOTS more detail. In the case of the <YourPortName> logs, you'll want
      it enabled to see the traffic.

      Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

      On 2/27/2011 9:48 PM, Nigel Gunn G8IFF/W8IFF wrote:
      > OK, works after I click ENABLE
      >
      > On 28-Feb-11 02:40, Nigel Gunn G8IFF/W8IFF wrote:
      >> Gives the message:
      >>
      >> WinMain:2011-02-27T18:04:44.401 Starting TNC
      >> TNC:2011-02-27T18:04:44.416 Opening COM1 with 4 Args
      >> TNC:2011-02-27T18:04:47.287 Missed Expected Response(cmd:) From Command(KISS ON)
      >>
      >>
      >> On 27-Feb-11 20:58, Lynn W Deffenbaugh (Mr) wrote:
      >>>
      >>> Enables / View Logs /<YourPortName> and make sure it is Enabled. You'll see every packet on that port in near realtime.
      >>> The next time you close APRSISCE/32, tell it to "Always" keep that trace log enabled. No terminal mode required.
      >>>
      >>> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
      >>>
      >>> On 2/27/2011 3:34 PM, Randy Love wrote:
      >>>>
      >>>> On Sun, Feb 27, 2011 at 6:44 AM, Lynn W Deffenbaugh (Mr)<kj4erj@...<mailto:kj4erj@...>> wrote:
      >>>>
      >>>> ToDo List: Dumb terminal emulator (Craig KI6WLP)
      >>>>
      >>>> I'm curious though, after you have it all set up, just how often do you
      >>>> need to access the TNC to send commands? And which TNC are you
      >>>> particularly interested in?
      >>>>
      >>>> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
      >>>>
      >>>>
      >>>>
      >>>>
      >>>> When the TNC is in KISS mode or accessed via AGWpe, there isn't much at all you can do with this, but monitor the
      >>>> packets received. I would want it more for that reason than anything else -- to see the received packets ( all of them
      >>>> ) and determine if there's other traffic on the channel other than APRS traffic and to verify APRS packets that are
      >>>> received visually. Sometimes you can't tell that someone has messed up their path or comment text unless you can see
      >>>> the raw packet, real time is nice, but digging thru a log file after the fact is time consuming when you just want to
      >>>> do a quick, instant verification. Besides, it's good for those of us that are experienced to see the packets fly. :) I
      >>>> get a warm and fuzzy feeling that my AGW connection or TNC is actually receiving stuff by being able to open that
      >>>> monitor/terminal window whilst in APRSISCE/32. I'd consider it more of a diagnostic tool than an actual communications
      >>>> aid.
      >>>>
      >>>> Randy
      >>>> WF5X
      >>>>
      >>>
      >>>
      >>>
    Your message has been successfully submitted and would be delivered to recipients shortly.