Loading ...
Sorry, an error occurred while loading the content.

Kenwood TS-2000

Expand Messages
  • Pat KC6VVT Assistant SEC/IL
    Up and running with a Kenwood TS-2000 on APRSIS32 2/10/11 version. This radio uses a TASCO internal modem, similar to the one in the TH-D7A and the TM-D700A.
    Message 1 of 13 , Feb 23 3:25 PM
    • 0 Attachment
      Up and running with a Kenwood TS-2000 on APRSIS32 2/10/11 version.
      This radio uses a TASCO internal modem, similar to the one in the TH-D7A and the TM-D700A.
      The TS-2000 does not have an APRS mode, however.
      Using the APRSIS32 program, I picked the TM-D710 Pkt (Packet mode)and saved it as the COM1 port labeled TS-2000 at 9600 8n1.
      I checked everything I could with Hyper-terminal when it did not work at first. That tested okay. The APRSIS Wiki article by Arte concerning the TM-D710 was most helpful, and credit what success I had to that.
      vy 73 de Pat KC6VVT
    • k8rmm@att.net
      Thanks for the info on setting up ARRSIS32 on the Kenwood Ts-2000. What were the settings you used on the radio to get it to work? I am able to connect to the
      Message 2 of 13 , Mar 11, 2011
      • 0 Attachment
        Thanks for the info on setting up ARRSIS32 on the Kenwood Ts-2000.

        What were the settings you used on the radio to get it to work? I am able to connect to the radio from the computer using MCP-2000, HRD etc. But when I try anything with the TNC I can't get it to work. Any help will be appreciated.


        73,
        Richard Maske
        K8RMM

        --- In aprsisce@yahoogroups.com, "Pat KC6VVT Assistant SEC/IL" <kc6vvt@...> wrote:
        >
        > Up and running with a Kenwood TS-2000 on APRSIS32 2/10/11 version.
        > This radio uses a TASCO internal modem, similar to the one in the TH-D7A and the TM-D700A.
        > The TS-2000 does not have an APRS mode, however.
        > Using the APRSIS32 program, I picked the TM-D710 Pkt (Packet mode)and saved it as the COM1 port labeled TS-2000 at 9600 8n1.
        > I checked everything I could with Hyper-terminal when it did not work at first. That tested okay. The APRSIS Wiki article by Arte concerning the TM-D710 was most helpful, and credit what success I had to that.
        > vy 73 de Pat KC6VVT
        >
      • Pat KC6VVT Assistant SEC/IL
        Richard K8RMM, if you are using HRD and MCP control program, that will block use of the internal TNC, as the rig control and packet terminal will the same
        Message 3 of 13 , May 8, 2011
        • 0 Attachment
          Richard K8RMM, if you are using HRD and MCP control program, that will block use of the internal TNC, as the rig control and packet terminal will the same serial port (Dsub 9) on the TS-2000.

          Either use the rig control programs, or use the internal TNC switched on in the rig menu for packet. Rig keeps you from using both at the same time.

          I use the front panel of the radio to choose rig CONTROL or to use the internal TNC.

          Menu control is # 55 for Packet communications mode on/off.
          ==

          Regret delay in answering this, was on a trip to San Diego at the time you asked, and your post got buried in the avalanche of traffic on this APRSISCE Yahoo reflector.

          73 de Pat KC6VVT

          --- In aprsisce@yahoogroups.com, "k8rmm@..." <k8rmm@...> wrote:
          >
          > Thanks for the info on setting up ARRSIS32 on the Kenwood Ts-2000.
          >
          > What were the settings you used on the radio to get it to work? I am able to connect to the radio from the computer using MCP-2000, HRD etc. But when I try anything with the TNC I can't get it to work. Any help will be appreciated.
          >
          >
          > 73,
          > Richard Maske
          > K8RMM
          >
          > --- In aprsisce@yahoogroups.com, "Pat KC6VVT Assistant SEC/IL" <kc6vvt@> wrote:
          > >
          > > Up and running with a Kenwood TS-2000 on APRSIS32 2/10/11 version.
          > > This radio uses a TASCO internal modem, similar to the one in the TH-D7A and the TM-D700A.
          > > The TS-2000 does not have an APRS mode, however.
          > > Using the APRSIS32 program, I picked the TM-D710 Pkt (Packet mode)and saved it as the COM1 port labeled TS-2000 at 9600 8n1.
          > > I checked everything I could with Hyper-terminal when it did not work at first. That tested okay. The APRSIS Wiki article by Arte concerning the TM-D710 was most helpful, and credit what success I had to that.
          > > vy 73 de Pat KC6VVT
          > >
          >
        • astroadam_75
          All, I am trying to get my TS-2000 running with APRSIS32 with the built in com port on the TS-2000. I have tried all the com port types, KISS, TMD710 paket,
          Message 4 of 13 , Jun 3, 2011
          • 0 Attachment
            All, I am trying to get my TS-2000 running with APRSIS32 with the built in com port on the TS-2000. I have tried all the com port types, KISS, TMD710 paket, etc... Nothing seems to be quite right.

            I have the TS-2000 setup for 9600 and set to packet on the sub receiver. I get the following in the log for the TS-2000 port:

            TS-2000:2011-06-03T18:29:34.735 Closing COM1:9600,N,8,1
            TS-2000:2011-06-03T18:29:35.758 Missed Expected Response(cmd:) From Command(^M!cmd:!1)
            TS-2000:2011-06-03T18:29:36.783 Missed Expected Response(cmd:) From Command(LTM 0)
            TS-2000:2011-06-03T18:29:37.808 Missed Expected Response(TS 1) From Command(TC 1!TS 1)
            TS-2000:2011-06-03T18:29:38.836 Missed Expected Response(TN 0,0) From Command(TN 0,0!TN 0,0)
            TS-2000:2011-06-03T18:29:38.849 Restarting Reader...
            TS-2000:2011-06-03T18:29:38.849 Opening COM1 with 4 Args
            TS-2000:2011-06-03T18:29:39.878 Missed Expected Response(?) From Command(TC 1!?)
            TS-2000:2011-06-03T18:29:40.902 Missed Expected Response(TS 1) From Command(TC 1!TS 1)
            TS-2000:2011-06-03T18:29:41.929 Missed Expected Response(TN 2,0) From Command(TN 2,0!TN 2,0)
            TS-2000:2011-06-03T18:29:46.953 Missed Expected Response(cmd:) From Command(^M!cmd:!5)
            TS-2000:2011-06-03T18:29:48.000 Missed Expected Response(cmd:) From Command(DIG OFF)
            TS-2000:2011-06-03T18:29:49.029 Missed Expected Response(cmd:) From Command(GB 4800)
            TS-2000:2011-06-03T18:29:50.053 Missed Expected Response(cmd:) From Command(HB 1200)
            TS-2000:2011-06-03T18:29:51.086 Missed Expected Response(cmd:) From Command(GPST $GPRMC)
            TS-2000:2011-06-03T18:29:52.113 Missed Expected Response(cmd:) From Command(LTM 10)
            TS-2000:2011-06-03T18:29:53.144 Missed Expected Response(cmd:) From Command(LTMH OFF)
            TS-2000:2011-06-03T18:29:54.174 Missed Expected Response(cmd:) From Command(LOC E 0)
            TS-2000:2011-06-03T18:29:55.202 Missed Expected Response(cmd:) From Command(M ON)
            TS-2000:2011-06-03T18:29:56.237 Missed Expected Response(cmd:) From Command(MCOM ON)
            TS-2000:2011-06-03T18:29:57.266 Missed Expected Response(cmd:) From Command(MS OFF)
            TS-2000:2011-06-03T18:29:58.300 Missed Expected Response(cmd:) From Command(CONO OFF)
            TS-2000:2011-06-03T18:29:59.326 Missed Expected Response(cmd:) From Command(P 250)
            TS-2000:2011-06-03T18:30:00.350 Missed Expected Response(cmd:) From Command(UI OFF)
            TS-2000:2011-06-03T18:30:01.384 Missed Expected Response(cmd:) From Command(UIF NOID)
            TS-2000:2011-06-03T18:30:02.412 Missed Expected Response(cmd:) From Command(UIT %)
            TS-2000:2011-06-03T18:30:03.436 Missed Expected Response(cmd:) From Command(X OFF)
            TS-2000:2011-06-03T18:30:04.469 Missed Expected Response(cmd:) From Command(HEADER OFF)
            TS-2000:2011-06-03T18:30:05.499 Missed Expected Response(cmd:) From Command(NE ON)
            TS-2000:2011-06-03T18:30:06.530 Missed Expected Response(cmd:) From Command(NO OFF)
            TS-2000:2011-06-03T18:30:07.563 Missed Expected Response(cmd:) From Command(ECHO OFF!cmd:!1.0)
            TS-2000:2011-06-03T18:30:08.594 Missed Expected Response(cmd:) From Command(BEACON EVERY 0!cmd:!1.0)
            TS-2000:2011-06-03T18:30:09.627 Missed Expected Response(cmd:) From Command(ECHO OFF!cmd:!1.00)
            TS-2000:2011-06-03T18:30:10.658 Missed Expected Response(cmd:) From Command(BEACON EVERY 0!cmd:!1.00)


            Any ideas?

            73's and thanks in advance.

            Adam
            KG4PES
          • James Ewen
            Looks like you re trying to use the TS-2000 as a TM-D710. I have mine running in KISS mode and it s quite happy. The instructions on getting the TS-2000 into
            Message 5 of 13 , Jun 3, 2011
            • 0 Attachment
              Looks like you're trying to use the TS-2000 as a TM-D710.

              I have mine running in KISS mode and it's quite happy. The
              instructions on getting the TS-2000 into KISS are a little wonky in
              the user manual. It says to set the radio up for KISS mode then power
              cycle the radio. Mine seems to like to stay in KISS.

              I'm acouple hours from home right now, but will try to remember to
              share my settings when I get back.

              Search the archives for TS-2000... I have posted some stuff about it
              before. Not sure if I put my settings in an email or not.

              My TS-2000 is running in KISS mode with APRISCE/32 running under WINE
              on Ubuntu.

              Just to be difficult!

              James
              VE6SRV

              On 6/3/11, astroadam_75 <adam@...> wrote:
              > All, I am trying to get my TS-2000 running with APRSIS32 with the built in
              > com port on the TS-2000. I have tried all the com port types, KISS, TMD710
              > paket, etc... Nothing seems to be quite right.
              >
              > I have the TS-2000 setup for 9600 and set to packet on the sub receiver. I
              > get the following in the log for the TS-2000 port:
              >
              > TS-2000:2011-06-03T18:29:34.735 Closing COM1:9600,N,8,1
              > TS-2000:2011-06-03T18:29:35.758 Missed Expected Response(cmd:) From
              > Command(^M!cmd:!1)
              > TS-2000:2011-06-03T18:29:36.783 Missed Expected Response(cmd:) From
              > Command(LTM 0)
              > TS-2000:2011-06-03T18:29:37.808 Missed Expected Response(TS 1) From
              > Command(TC 1!TS 1)
              > TS-2000:2011-06-03T18:29:38.836 Missed Expected Response(TN 0,0) From
              > Command(TN 0,0!TN 0,0)
              > TS-2000:2011-06-03T18:29:38.849 Restarting Reader...
              > TS-2000:2011-06-03T18:29:38.849 Opening COM1 with 4 Args
              > TS-2000:2011-06-03T18:29:39.878 Missed Expected Response(?) From Command(TC
              > 1!?)
              > TS-2000:2011-06-03T18:29:40.902 Missed Expected Response(TS 1) From
              > Command(TC 1!TS 1)
              > TS-2000:2011-06-03T18:29:41.929 Missed Expected Response(TN 2,0) From
              > Command(TN 2,0!TN 2,0)
              > TS-2000:2011-06-03T18:29:46.953 Missed Expected Response(cmd:) From
              > Command(^M!cmd:!5)
              > TS-2000:2011-06-03T18:29:48.000 Missed Expected Response(cmd:) From
              > Command(DIG OFF)
              > TS-2000:2011-06-03T18:29:49.029 Missed Expected Response(cmd:) From
              > Command(GB 4800)
              > TS-2000:2011-06-03T18:29:50.053 Missed Expected Response(cmd:) From
              > Command(HB 1200)
              > TS-2000:2011-06-03T18:29:51.086 Missed Expected Response(cmd:) From
              > Command(GPST $GPRMC)
              > TS-2000:2011-06-03T18:29:52.113 Missed Expected Response(cmd:) From
              > Command(LTM 10)
              > TS-2000:2011-06-03T18:29:53.144 Missed Expected Response(cmd:) From
              > Command(LTMH OFF)
              > TS-2000:2011-06-03T18:29:54.174 Missed Expected Response(cmd:) From
              > Command(LOC E 0)
              > TS-2000:2011-06-03T18:29:55.202 Missed Expected Response(cmd:) From
              > Command(M ON)
              > TS-2000:2011-06-03T18:29:56.237 Missed Expected Response(cmd:) From
              > Command(MCOM ON)
              > TS-2000:2011-06-03T18:29:57.266 Missed Expected Response(cmd:) From
              > Command(MS OFF)
              > TS-2000:2011-06-03T18:29:58.300 Missed Expected Response(cmd:) From
              > Command(CONO OFF)
              > TS-2000:2011-06-03T18:29:59.326 Missed Expected Response(cmd:) From
              > Command(P 250)
              > TS-2000:2011-06-03T18:30:00.350 Missed Expected Response(cmd:) From
              > Command(UI OFF)
              > TS-2000:2011-06-03T18:30:01.384 Missed Expected Response(cmd:) From
              > Command(UIF NOID)
              > TS-2000:2011-06-03T18:30:02.412 Missed Expected Response(cmd:) From
              > Command(UIT %)
              > TS-2000:2011-06-03T18:30:03.436 Missed Expected Response(cmd:) From
              > Command(X OFF)
              > TS-2000:2011-06-03T18:30:04.469 Missed Expected Response(cmd:) From
              > Command(HEADER OFF)
              > TS-2000:2011-06-03T18:30:05.499 Missed Expected Response(cmd:) From
              > Command(NE ON)
              > TS-2000:2011-06-03T18:30:06.530 Missed Expected Response(cmd:) From
              > Command(NO OFF)
              > TS-2000:2011-06-03T18:30:07.563 Missed Expected Response(cmd:) From
              > Command(ECHO OFF!cmd:!1.0)
              > TS-2000:2011-06-03T18:30:08.594 Missed Expected Response(cmd:) From
              > Command(BEACON EVERY 0!cmd:!1.0)
              > TS-2000:2011-06-03T18:30:09.627 Missed Expected Response(cmd:) From
              > Command(ECHO OFF!cmd:!1.00)
              > TS-2000:2011-06-03T18:30:10.658 Missed Expected Response(cmd:) From
              > Command(BEACON EVERY 0!cmd:!1.00)
              >
              >
              > Any ideas?
              >
              > 73's and thanks in advance.
              >
              > Adam
              > KG4PES
              >
              >
              >
              > ------------------------------------
              >
              > Yahoo! Groups Links
              >
              >
              >
              >
            • astroadam_75
              James, The KISS setting seems to get things a bit cleaner. However, I just can t seem to figure out what is not configured with the TS-2000 side. If you
              Message 6 of 13 , Jun 3, 2011
              • 0 Attachment
                James,

                The KISS setting seems to get things a bit cleaner. However, I just can't seem to figure out what is not configured with the TS-2000 side. If you don't mind sending me your TS-2000 configs when you get a chance I would appreciate it.

                A search of the archives doesn't bring up much detail. A few of you were messing with it a year or so ago, but seems like the conversation may have been in email.

                Thanks,
                Adam
                --- In aprsisce@yahoogroups.com, James Ewen <ve6srv@...> wrote:
                >
                > Looks like you're trying to use the TS-2000 as a TM-D710.
                >
                > I have mine running in KISS mode and it's quite happy. The
                > instructions on getting the TS-2000 into KISS are a little wonky in
                > the user manual. It says to set the radio up for KISS mode then power
                > cycle the radio. Mine seems to like to stay in KISS.
                >
                > I'm acouple hours from home right now, but will try to remember to
                > share my settings when I get back.
                >
                > Search the archives for TS-2000... I have posted some stuff about it
                > before. Not sure if I put my settings in an email or not.
                >
                > My TS-2000 is running in KISS mode with APRISCE/32 running under WINE
                > on Ubuntu.
                >
                > Just to be difficult!
                >
                > James
                > VE6SRV
              • apenadragon
                Adam Here is my RF Port for the TS-2000 KISS COM4:57600,N,8,1
                Message 7 of 13 , Jun 5, 2011
                • 0 Attachment
                  Adam

                  Here is my RF Port for the TS-2000

                  <!--RFPort[0]-->
                  <RFPort Name="TS2000">
                  <Protocol>KISS</Protocol>
                  <Device>COM4:57600,N,8,1</Device>
                  <RfBaud>1200</RfBaud>
                  <OpenCmd>^M~</OpenCmd>
                  <OpenCmd>^M~</OpenCmd>
                  <OpenCmd>XFLOW OFF</OpenCmd>
                  <OpenCmd>FULLDUP ON</OpenCmd>
                  <OpenCmd>KISS ON</OpenCmd>
                  <OpenCmd>RESTART!!0</OpenCmd>
                  <CloseCmd>^192^255^192~!!0</CloseCmd>
                  <CloseCmd>^C^C^C~!!0</CloseCmd>
                  <CloseCmd>TC 1!TS 1</CloseCmd>
                  <CloseCmd>TN 2,0!TN 2,0</CloseCmd>
                  <QuietTime>30</QuietTime>
                  <Enabled>0</Enabled>
                  <XmitEnabled>1</XmitEnabled>
                  <RFtoISEnabled>1</RFtoISEnabled>
                  <IStoRFEnabled>1</IStoRFEnabled>
                  <MyCallNot3rd>0</MyCallNot3rd>
                  <BeaconingEnabled>1</BeaconingEnabled>
                  <BeaconPath></BeaconPath>
                  <BulletinObjectEnabled>1</BulletinObjectEnabled>
                  <MessagesEnabled>1</MessagesEnabled>
                  <MessagePath></MessagePath>
                  <TelemetryEnabled>0</TelemetryEnabled>
                  <TelemetryPath></TelemetryPath>
                  <!--DigiXform-->
                  </RFPort>
                  <!--RFPort[0]-->


                  It's currently not my default radio so it's disabled. I did have this running for several months before I got my TT4 set up working properly.

                  TS2000 Menu Items

                  46 Main/Sub band;Built in TNC=Sub
                  47 Data Transfer Rate; Built-In TNC=1200
                  48 DCD Sense=TNC Band
                  50A Packet Filter Bandwidth=off
                  50B AF Input Level for Packet=4
                  50D Sub Band AF Output Level for Packet=4
                  55 Packet Operation=on
                  56 Com Connector Parameters 57600

                  I also ran with the preamp off as I live pretty close to a Digi.


                  I think that covers the TNC menu items.

                  Good luck,
                  Adam
                  KC2ANT

                  --- In aprsisce@yahoogroups.com, "astroadam_75" <adam@...> wrote:
                  >
                  > James,
                  >
                  > The KISS setting seems to get things a bit cleaner. However, I just can't seem to figure out what is not configured with the TS-2000 side. If you don't mind sending me your TS-2000 configs when you get a chance I would appreciate it.
                  >
                  > A search of the archives doesn't bring up much detail. A few of you were messing with it a year or so ago, but seems like the conversation may have been in email.
                  >
                  > Thanks,
                  > Adam
                  > --- In aprsisce@yahoogroups.com, James Ewen <ve6srv@> wrote:
                  > >
                  > > Looks like you're trying to use the TS-2000 as a TM-D710.
                  > >
                  > > I have mine running in KISS mode and it's quite happy. The
                  > > instructions on getting the TS-2000 into KISS are a little wonky in
                  > > the user manual. It says to set the radio up for KISS mode then power
                  > > cycle the radio. Mine seems to like to stay in KISS.
                  > >
                  > > I'm acouple hours from home right now, but will try to remember to
                  > > share my settings when I get back.
                  > >
                  > > Search the archives for TS-2000... I have posted some stuff about it
                  > > before. Not sure if I put my settings in an email or not.
                  > >
                  > > My TS-2000 is running in KISS mode with APRISCE/32 running under WINE
                  > > on Ubuntu.
                  > >
                  > > Just to be difficult!
                  > >
                  > > James
                  > > VE6SRV
                  >
                • astroadam_75
                  Thank you, that was perfect.
                  Message 8 of 13 , Jun 13, 2011
                  • 0 Attachment
                    Thank you, that was perfect.

                    --- In aprsisce@yahoogroups.com, "apenadragon" <kc2ant@...> wrote:
                    >
                    > Adam
                    >
                    > Here is my RF Port for the TS-2000
                    >
                    > <!--RFPort[0]-->
                    > <RFPort Name="TS2000">
                    > <Protocol>KISS</Protocol>
                    > <Device>COM4:57600,N,8,1</Device>
                    > <RfBaud>1200</RfBaud>
                    > <OpenCmd>^M~</OpenCmd>
                    > <OpenCmd>^M~</OpenCmd>
                    > <OpenCmd>XFLOW OFF</OpenCmd>
                    > <OpenCmd>FULLDUP ON</OpenCmd>
                    > <OpenCmd>KISS ON</OpenCmd>
                    > <OpenCmd>RESTART!!0</OpenCmd>
                    > <CloseCmd>^192^255^192~!!0</CloseCmd>
                    > <CloseCmd>^C^C^C~!!0</CloseCmd>
                    > <CloseCmd>TC 1!TS 1</CloseCmd>
                    > <CloseCmd>TN 2,0!TN 2,0</CloseCmd>
                    > <QuietTime>30</QuietTime>
                    > <Enabled>0</Enabled>
                    > <XmitEnabled>1</XmitEnabled>
                    > <RFtoISEnabled>1</RFtoISEnabled>
                    > <IStoRFEnabled>1</IStoRFEnabled>
                    > <MyCallNot3rd>0</MyCallNot3rd>
                    > <BeaconingEnabled>1</BeaconingEnabled>
                    > <BeaconPath></BeaconPath>
                    > <BulletinObjectEnabled>1</BulletinObjectEnabled>
                    > <MessagesEnabled>1</MessagesEnabled>
                    > <MessagePath></MessagePath>
                    > <TelemetryEnabled>0</TelemetryEnabled>
                    > <TelemetryPath></TelemetryPath>
                    > <!--DigiXform-->
                    > </RFPort>
                    > <!--RFPort[0]-->
                    >
                    >
                    > It's currently not my default radio so it's disabled. I did have this running for several months before I got my TT4 set up working properly.
                    >
                    > TS2000 Menu Items
                    >
                    > 46 Main/Sub band;Built in TNC=Sub
                    > 47 Data Transfer Rate; Built-In TNC=1200
                    > 48 DCD Sense=TNC Band
                    > 50A Packet Filter Bandwidth=off
                    > 50B AF Input Level for Packet=4
                    > 50D Sub Band AF Output Level for Packet=4
                    > 55 Packet Operation=on
                    > 56 Com Connector Parameters 57600
                    >
                    > I also ran with the preamp off as I live pretty close to a Digi.
                    >
                    >
                    > I think that covers the TNC menu items.
                    >
                    > Good luck,
                    > Adam
                    > KC2ANT
                    >
                    > --- In aprsisce@yahoogroups.com, "astroadam_75" <adam@> wrote:
                    > >
                    > > James,
                    > >
                    > > The KISS setting seems to get things a bit cleaner. However, I just can't seem to figure out what is not configured with the TS-2000 side. If you don't mind sending me your TS-2000 configs when you get a chance I would appreciate it.
                    > >
                    > > A search of the archives doesn't bring up much detail. A few of you were messing with it a year or so ago, but seems like the conversation may have been in email.
                    > >
                    > > Thanks,
                    > > Adam
                    > > --- In aprsisce@yahoogroups.com, James Ewen <ve6srv@> wrote:
                    > > >
                    > > > Looks like you're trying to use the TS-2000 as a TM-D710.
                    > > >
                    > > > I have mine running in KISS mode and it's quite happy. The
                    > > > instructions on getting the TS-2000 into KISS are a little wonky in
                    > > > the user manual. It says to set the radio up for KISS mode then power
                    > > > cycle the radio. Mine seems to like to stay in KISS.
                    > > >
                    > > > I'm acouple hours from home right now, but will try to remember to
                    > > > share my settings when I get back.
                    > > >
                    > > > Search the archives for TS-2000... I have posted some stuff about it
                    > > > before. Not sure if I put my settings in an email or not.
                    > > >
                    > > > My TS-2000 is running in KISS mode with APRISCE/32 running under WINE
                    > > > on Ubuntu.
                    > > >
                    > > > Just to be difficult!
                    > > >
                    > > > James
                    > > > VE6SRV
                    > >
                    >
                  • apenadragon
                    NP, Glad you got it working. Adam KC2ANT
                    Message 9 of 13 , Jun 16, 2011
                    • 0 Attachment
                      NP, Glad you got it working.

                      Adam
                      KC2ANT

                      --- In aprsisce@yahoogroups.com, "astroadam_75" <adam@...> wrote:
                      >
                      > Thank you, that was perfect.
                    • Ron N9SZV
                      using my Kenwoods sub band for APRS hearing and digipeating lots of signal s but for some resend firenet is not reporting to http://aprs.fi/info/a/N9SZV I go
                      Message 10 of 13 , Nov 19, 2011
                      • 0 Attachment
                        using my Kenwoods sub band for APRS hearing and digipeating lots of signal's but for some resend firenet is not reporting to http://aprs.fi/info/a/N9SZV I go there and its not seeing or posting what i'm hearing or who hears me??

                        Ron N9SZV
                      • James Ewen
                        Is your station the only i-gate in the area? The APRS-IS stream is an extremely heavily filtered subset of the information flowing around the APRS-RF network.
                        Message 11 of 13 , Nov 19, 2011
                        • 0 Attachment
                          Is your station the only i-gate in the area? The APRS-IS stream is an
                          extremely heavily filtered subset of the information flowing around
                          the APRS-RF network. Only the first copy of a packet to be heard by
                          the APRS-IS is stored. Any subsequent copies passed to the APRS-IS are
                          dropped. If you are running an i-gate, and expecting to see every
                          packet you hear passed to the APRS-IS stream, you'll be disappointed.
                          If there are any other i-gates in the area, you will be in direct
                          competition with them in trying to pass the packets to the APRS-IS
                          stream first. If your internet connection is slower than the
                          competition, you won't see packets being passed by your i-gate.

                          If you are running a digipeater and i-gate combination, you will never
                          see packets digipeated by your station for a similar reason. When the
                          packet is heard by your station, it will be gated to the APRS-IS
                          stream and then digipeated. Since the digipeated copy is being sent
                          from your station, the i-gate will not hear the digipeated copy to
                          send to the APRS-IS. That doesn't really matter because there's
                          already a copy of the packet that has been sent to the APRS-IS. If you
                          hear another copy of the same packet being digipeated by another
                          station after your station has digipeated the packet, the same rules
                          apply. There's already a copy of that packet in the APRS-IS stream.

                          Using the PATHs function now included in APRSISCE/32 (development
                          version only currently), you will be able to see ALL the copies of the
                          packets being heard by your station, and the various paths they took
                          to get to your station. If you have a sufficiently large enough
                          APRS-IS filter enabled, you would also be able to see the path the
                          packet would have taken to get to another station acting as an i-gate,
                          should that station have been the first to pass the packet to the
                          APRS-IS stream.

                          --
                          James
                          VE6SRV
                        • TW
                          How do I get the info in there for the port configuration?
                          Message 12 of 13 , Apr 5, 2013
                          • 0 Attachment
                            How do I get the info in there for the port configuration?

                            --- In aprsisce@yahoogroups.com, "astroadam_75" <adam@...> wrote:
                            >
                            > Thank you, that was perfect.
                            >
                            > --- In aprsisce@yahoogroups.com, "apenadragon" <kc2ant@> wrote:
                            > >
                            > > Adam
                            > >
                            > > Here is my RF Port for the TS-2000
                            > >
                            > > <!--RFPort[0]-->
                            > > <RFPort Name="TS2000">
                            > > <Protocol>KISS</Protocol>
                            > > <Device>COM4:57600,N,8,1</Device>
                            > > <RfBaud>1200</RfBaud>
                            > > <OpenCmd>^M~</OpenCmd>
                            > > <OpenCmd>^M~</OpenCmd>
                            > > <OpenCmd>XFLOW OFF</OpenCmd>
                            > > <OpenCmd>FULLDUP ON</OpenCmd>
                            > > <OpenCmd>KISS ON</OpenCmd>
                            > > <OpenCmd>RESTART!!0</OpenCmd>
                            > > <CloseCmd>^192^255^192~!!0</CloseCmd>
                            > > <CloseCmd>^C^C^C~!!0</CloseCmd>
                            > > <CloseCmd>TC 1!TS 1</CloseCmd>
                            > > <CloseCmd>TN 2,0!TN 2,0</CloseCmd>
                            > > <QuietTime>30</QuietTime>
                            > > <Enabled>0</Enabled>
                            > > <XmitEnabled>1</XmitEnabled>
                            > > <RFtoISEnabled>1</RFtoISEnabled>
                            > > <IStoRFEnabled>1</IStoRFEnabled>
                            > > <MyCallNot3rd>0</MyCallNot3rd>
                            > > <BeaconingEnabled>1</BeaconingEnabled>
                            > > <BeaconPath></BeaconPath>
                            > > <BulletinObjectEnabled>1</BulletinObjectEnabled>
                            > > <MessagesEnabled>1</MessagesEnabled>
                            > > <MessagePath></MessagePath>
                            > > <TelemetryEnabled>0</TelemetryEnabled>
                            > > <TelemetryPath></TelemetryPath>
                            > > <!--DigiXform-->
                            > > </RFPort>
                            > > <!--RFPort[0]-->
                            > >
                            > >
                            > > It's currently not my default radio so it's disabled. I did have this running for several months before I got my TT4 set up working properly.
                            > >
                            > > TS2000 Menu Items
                            > >
                            > > 46 Main/Sub band;Built in TNC=Sub
                            > > 47 Data Transfer Rate; Built-In TNC=1200
                            > > 48 DCD Sense=TNC Band
                            > > 50A Packet Filter Bandwidth=off
                            > > 50B AF Input Level for Packet=4
                            > > 50D Sub Band AF Output Level for Packet=4
                            > > 55 Packet Operation=on
                            > > 56 Com Connector Parameters 57600
                            > >
                            > > I also ran with the preamp off as I live pretty close to a Digi.
                            > >
                            > >
                            > > I think that covers the TNC menu items.
                            > >
                            > > Good luck,
                            > > Adam
                            > > KC2ANT
                            > >
                            > > --- In aprsisce@yahoogroups.com, "astroadam_75" <adam@> wrote:
                            > > >
                            > > > James,
                            > > >
                            > > > The KISS setting seems to get things a bit cleaner. However, I just can't seem to figure out what is not configured with the TS-2000 side. If you don't mind sending me your TS-2000 configs when you get a chance I would appreciate it.
                            > > >
                            > > > A search of the archives doesn't bring up much detail. A few of you were messing with it a year or so ago, but seems like the conversation may have been in email.
                            > > >
                            > > > Thanks,
                            > > > Adam
                            > > > --- In aprsisce@yahoogroups.com, James Ewen <ve6srv@> wrote:
                            > > > >
                            > > > > Looks like you're trying to use the TS-2000 as a TM-D710.
                            > > > >
                            > > > > I have mine running in KISS mode and it's quite happy. The
                            > > > > instructions on getting the TS-2000 into KISS are a little wonky in
                            > > > > the user manual. It says to set the radio up for KISS mode then power
                            > > > > cycle the radio. Mine seems to like to stay in KISS.
                            > > > >
                            > > > > I'm acouple hours from home right now, but will try to remember to
                            > > > > share my settings when I get back.
                            > > > >
                            > > > > Search the archives for TS-2000... I have posted some stuff about it
                            > > > > before. Not sure if I put my settings in an email or not.
                            > > > >
                            > > > > My TS-2000 is running in KISS mode with APRISCE/32 running under WINE
                            > > > > on Ubuntu.
                            > > > >
                            > > > > Just to be difficult!
                            > > > >
                            > > > > James
                            > > > > VE6SRV
                            > > >
                            > >
                            >
                          • Adam Mahnke
                            http://aprsisce.wikidot.com/doc:editing-xml-configuration Is how you can copy and past it into the XML file. Or you can follow the new port options under
                            Message 13 of 13 , Apr 6, 2013
                            • 0 Attachment
                              http://aprsisce.wikidot.com/doc:editing-xml-configuration

                              Is how you can copy and past it into the XML file.

                              Or you can follow the new port options under configure->port->new

                              Adam
                              KC2ANT


                              To: aprsisce@yahoogroups.com
                              From: kf6kyd@...
                              Date: Sat, 6 Apr 2013 01:24:27 +0000
                              Subject: [aprsisce] Re: Kenwood TS-2000 - and APRSIS32

                               
                              How do I get the info in there for the port configuration?

                              --- In aprsisce@yahoogroups.com, "astroadam_75" <adam@...> wrote:
                              >
                              > Thank you, that was perfect.
                              >
                              > --- In aprsisce@yahoogroups.com, "apenadragon" <kc2ant@> wrote:
                              > >
                              > > Adam
                              > >
                              > > Here is my RF Port for the TS-2000
                              > >
                              > > <!--RFPort[0]-->
                              > > <RFPort Name="TS2000">
                              > > <Protocol>KISS</Protocol>
                              > > <Device>COM4:57600,N,8,1</Device>
                              > > <RfBaud>1200</RfBaud>
                              > > <OpenCmd>^M~</OpenCmd>
                              > > <OpenCmd>^M~</OpenCmd>
                              > > <OpenCmd>XFLOW OFF</OpenCmd>
                              > > <OpenCmd>FULLDUP ON</OpenCmd>
                              > > <OpenCmd>KISS ON</OpenCmd>
                              > > <OpenCmd>RESTART!!0</OpenCmd>
                              > > <CloseCmd>^192^255^192~!!0</CloseCmd>
                              > > <CloseCmd>^C^C^C~!!0</CloseCmd>
                              > > <CloseCmd>TC 1!TS 1</CloseCmd>
                              > > <CloseCmd>TN 2,0!TN 2,0</CloseCmd>
                              > > <QuietTime>30</QuietTime>
                              > > <Enabled>0</Enabled>
                              > > <XmitEnabled>1</XmitEnabled>
                              > > <RFtoISEnabled>1</RFtoISEnabled>
                              > > <IStoRFEnabled>1</IStoRFEnabled>
                              > > <MyCallNot3rd>0</MyCallNot3rd>
                              > > <BeaconingEnabled>1</BeaconingEnabled>
                              > > <BeaconPath></BeaconPath>
                              > > <BulletinObjectEnabled>1</BulletinObjectEnabled>
                              > > <MessagesEnabled>1</MessagesEnabled>
                              > > <MessagePath></MessagePath>
                              > > <TelemetryEnabled>0</TelemetryEnabled>
                              > > <TelemetryPath></TelemetryPath>
                              > > <!--DigiXform-->
                              > > </RFPort>
                              > > <!--RFPort[0]-->
                              > >
                              > >
                              > > It's currently not my default radio so it's disabled. I did have this running for several months before I got my TT4 set up working properly.
                              > >
                              > > TS2000 Menu Items
                              > >
                              > > 46 Main/Sub band;Built in TNC=Sub
                              > > 47 Data Transfer Rate; Built-In TNC=1200
                              > > 48 DCD Sense=TNC Band
                              > > 50A Packet Filter Bandwidth=off
                              > > 50B AF Input Level for Packet=4
                              > > 50D Sub Band AF Output Level for Packet=4
                              > > 55 Packet Operation=on
                              > > 56 Com Connector Parameters 57600
                              > >
                              > > I also ran with the preamp off as I live pretty close to a Digi.
                              > >
                              > >
                              > > I think that covers the TNC menu items.
                              > >
                              > > Good luck,
                              > > Adam
                              > > KC2ANT
                              > >
                              > > --- In aprsisce@yahoogroups.com, "astroadam_75" <adam@> wrote:
                              > > >
                              > > > James,
                              > > >
                              > > > The KISS setting seems to get things a bit cleaner. However, I just can't seem to figure out what is not configured with the TS-2000 side. If you don't mind sending me your TS-2000 configs when you get a chance I would appreciate it.
                              > > >
                              > > > A search of the archives doesn't bring up much detail. A few of you were messing with it a year or so ago, but seems like the conversation may have been in email.
                              > > >
                              > > > Thanks,
                              > > > Adam
                              > > > --- In aprsisce@yahoogroups.com, James Ewen <ve6srv@> wrote:
                              > > > >
                              > > > > Looks like you're trying to use the TS-2000 as a TM-D710.
                              > > > >
                              > > > > I have mine running in KISS mode and it's quite happy. The
                              > > > > instructions on getting the TS-2000 into KISS are a little wonky in
                              > > > > the user manual. It says to set the radio up for KISS mode then power
                              > > > > cycle the radio. Mine seems to like to stay in KISS.
                              > > > >
                              > > > > I'm acouple hours from home right now, but will try to remember to
                              > > > > share my settings when I get back.
                              > > > >
                              > > > > Search the archives for TS-2000... I have posted some stuff about it
                              > > > > before. Not sure if I put my settings in an email or not.
                              > > > >
                              > > > > My TS-2000 is running in KISS mode with APRISCE/32 running under WINE
                              > > > > on Ubuntu.
                              > > > >
                              > > > > Just to be difficult!
                              > > > >
                              > > > > James
                              > > > > VE6SRV
                              > > >
                              > >
                              >


                            Your message has been successfully submitted and would be delivered to recipients shortly.