Loading ...
Sorry, an error occurred while loading the content.

RE: [aprsisce] Re: Shapes / ShowMe! (Dev 2011/02/01 00:44)

Expand Messages
  • Fred Hillhouse
    Hi Mike, If you haven t, unzip all files into your folder. That fixed it for me. I had only the SHP and DBF files but added the SHX and PRJ. Best regards, Fred
    Message 1 of 50 , Feb 1, 2011
    • 0 Attachment
      Hi Mike,
       
      If you haven't, unzip all files into your folder. That fixed it for me. I had only the SHP and DBF files but added the SHX and PRJ.
       
      Best regards,
      Fred
       


      From: aprsisce@yahoogroups.com [mailto:aprsisce@yahoogroups.com] On Behalf Of Mike Besemer (WM4B)
      Sent: Tuesday, February 01, 2011 16:24
      To: aprsisce@yahoogroups.com
      Subject: RE: [aprsisce] Re: Shapes / ShowMe! (Dev 2011/02/01 00:44)

       

      Same here, Lynn. 

      I’ll send my XML file direct.

      73,

      Mike

      WM4B

      From: aprsisce@yahoogroups.com [mailto:aprsisce@yahoogroups.com] On Behalf Of Fred Hillhouse
      Sent: Tuesday, February 01, 2011 9:08 AM
      To: aprsisce@yahoogroups.com
      Subject: RE: [aprsisce] Re: Shapes / ShowMe! (Dev 2011/02/01 00:44)

       

      "Show Me" shuts down APSRISI32. When I restart it, the ALL is checked.

      Best regards,

      Fred


      From: aprsisce@yahoogroups.com [mailto:aprsisce@yahoogroups.com] On Behalf Of n1naz
      Sent: Tuesday, February 01, 2011 06:38
      To: aprsisce@yahoogroups.com
      Subject: [aprsisce] Re: Shapes / ShowMe! (Dev 2011/02/01 00:44)

       

      Also be aware that if you do a "show me", the NWS/All gets checked, be sure to un-check when your done(if you want to).

      --- In aprsisce@yahoogroups.com, "Lynn W Deffenbaugh (Mr)" <kj4erj@...> wrote:

      >
      > Ok, so I went and
      did it. Here's another Development release with lots
      > of NWS and
      Shapefile stuff to play with. You can read the details
      > below, but
      personally I think the Configure / NWS Shapes / ShowMe is the
      > coolest
      one. If you have shapefiles loaded, then center the main map
      > somewhere
      and hit that menu option. Not only will one or more
      > MultiTrack windows
      open for each shape that might involve the screen
      > center point, but
      they'll also auto-zoom to show the entire shape! And
      > the shapes come
      with nice bold borders now too.
      >
      > Don't be surprise, however, to
      see the shapes go pale gray in a short
      > time. That's when my
      internally-generated object hits its expiration
      > time and goes to a
      Killed status. If it's not still centered somewhere,
      > the entire object
      will disappear. But it will remain in gray in the
      > popup that had it
      until you either close that MultiTrack or start
      > following some other
      station.
      >
      > This same auto-zoom feature is now the default
      behavior for Configure /
      > NWS / Popup MultiTrack windows as well. And
      you can now choose what
      > pops up based on Always, Only New and suppress
      any that don't include a
      > defined area (shape or multiline). You can
      also now suppress
      > notifications (message or MultiTrack) at the NWS
      Product level in
      > Configure / NWS / Notify Products. In that menu you
      also get a sneak
      > peek at the symbol used for the product as well as the
      "line code" which
      > currently sets the color and line style as described
      at
      >
      href="http://www.aprs-is.net/WX/MultilineProtocol.aspx.">http://www.aprs-is.net/WX/MultilineProtocol.aspx.
      >
      > Don't panic if the filled areas disappear when you pan the map. This is
      > by design and brings panning performance back to where I'm comfortable
      > with it. As soon as you stop panning (release the mouse button), the
      > shapes will reappear.
      >
      > There's some other stuff below,
      some of which is protecting the program
      > from people that down-grade (go
      back to earlier versions) which can
      > introduce issues due to automatic
      XML format upgrades. This release
      > does LOTS of that, but it now also
      automatically saves the previous
      > version .XML file similar to how the
      About updater saves the previous .EXE.
      >
      > Let me know if you find
      any bugs in this pretty quickly as I'd like to
      > get it committed and out
      to the General Release because of the filter
      > bug that is fixed within
      it. Besides, the Release Notes is already
      > quite substantial in such a
      short time.
      >
      > Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows
      Mobile and Win32
      >
      > Define APDUxx as U2APRS for Android
      >
      (http://aobajoke.no-ip.org/~ja7ude/japanese/u2aprs10/indexe.html)
      >
      > Mark NWS objects Killed rather than simply purging them away on
      expiration.
      >
      > Correct bust that allowed followed killed objects
      to disappear rather
      > substantially fade until they're no longer
      needed.
      >
      > Shaped areas that are killed but centered in a
      MultiTrack will turn
      > light gray until they're not centered anymore. If
      you look at the
      > station info popup, it will say "KILLED
      OBJECT".
      >
      > NWS shapes are now included in Station popup
      menu
      >
      > Corrected black on black station in scrolling station logs
      when NWS
      > alerts are processed. (Recursion is such an ugly word,
      especially when
      > it's unexpected)
      >
      > If too many
      MultiTracks are open when an NWS alert is received and
      > Configure / NWS
      / Popup MultiTrack is checked, it just quietly ignores
      > the problem. It
      used to complain for every one generating LOTS of
      > message boxes
      overnight.
      >
      > When manually panning a window, remove the multiline
      objects to
      > (dramatically) improve pan responsiveness. Area fills will
      re-appear
      > when the pan operation is complete (ie. when you release the
      mouse button).
      >
      > Fixed Configure / Ports / APRS-IS to actually
      use the Enable, QuietTime,
      > Callsign and Comment (even though the latter
      two are non-changeable)
      >
      > Change station info popup relative
      distance/bearing to FromCtr and
      > FromME instead of opposite (Julian
      G4ILO)
      >
      > Add outline to the shapes so that I can see if some of
      them are actually
      > TOO transparent. Please let me know the object ID if
      you see one like
      > that, particularly Australia's Flood areas.
      >
      > Configure / NWS Shapes / ShowMe will popup individual shapes that
      > include, or are near, the screen center of the main window when the
      menu
      > option is selected.
      >
      > Replace Track(ObjectID) with
      the description of the shape for test
      > shapes and better describe
      shape-expanded NWS objects.
      >
      > Title of windows "following" an NWS
      object (like the tests and
      > auto-popups from Configure / NWS / Popup
      MultiTrack) are more informative.
      >
      > Configure / NWS Shapes now
      supports unchecking individual files. I need
      > to add a prompt to ask if
      you're only disabling or would like to remove
      > the file from the
      list.
      >
      > Whenever a version change is detected, the pre-upgraded
      XML files is
      > saved as .XML.yyyymmddhhmm where yyyymmddhhmm is the
      previous version
      > string that should match a saved
      .EXE.yyyymmddhhmm.
      >
      > If the program detects a version downgrade,
      it will warn you that some
      > settings may be lost. This is due to the
      non-downgrade-compatible XML
      > configuration upgrades that may have
      occurred. Proceed at your own risk.
      >
      > Corrected bust in shape
      optimizer that was causing not all of the
      > "rings" to draw. This was
      particularly evident in QLC111. You should
      > see lots more detail in AUS
      shapes now.
      >
      > Don't pop up an already-expired NWS object.
      WXSVR-AU does LOTS of these
      > for some reason. I'm not sure how long they
      keep transmitting the
      > NWS-CANCLs.
      >
      > Force a filter of
      m/0 if no other filter is required (Julian G4ILO)
      > (Adam KB8VOM)
      >
      > Configure / NWS / Popup MultiTrack now has Always and New options.
      > "Always" will create or focus MultiTracks for NWS objects. "New" will
      > only do this for a newly created object.
      >
      > Support
      suppressing NWS Popups unless they describe an Area (multiline
      > or
      shapefile). This avoids consuming a bunch of redundant MultiTracks
      > for
      single point objects.
      >
      > New (possibly temporary)
      Packets(Internal) trace log as well as INT (vs
      > RF or IS) flagging in
      both the Transmit and Packets logs. This will
      > make identification of
      internally-generated packets a bit easier, in
      > case I ever need to know
      such a distinction.
      >
      > Transmit when "T" is pressed on the
      keyboard (assuming the main map
      > window is focused, otherwise Windows
      won't tell me you even hit a key).
      > (Alan N6VUD)
      >
      > New
      Configure / NWS / Notify Products to individually disable the
      > various
      known NWS Products (http://www.aprs-is.net/WX/ProdCodes.aspx and
      >
      href="http://wxsvr.aprs.net.au/products.php">http://wxsvr.aprs.net.au/products.php) from triggering message
      > notifications and MultiTrack popups. Eventually
      you'll be able to
      > configure more stuff on each Product than just the
      enable like color,
      > line style, symbol, -IS to RF
      IGate...
      >

    • Mike (WM4B)
      I think I already asked them all, Jeff! Lynn has the patience of a saint. 73, Mike WM4B From: aprsisce@yahoogroups.com [mailto:aprsisce@yahoogroups.com] On
      Message 50 of 50 , Feb 1, 2011
      • 0 Attachment
        I think I already asked them all, Jeff!

        Lynn has the patience of a saint.

        73,

        Mike
        WM4B

        From: aprsisce@yahoogroups.com [mailto:aprsisce@yahoogroups.com] On Behalf
        Of Jeff KB2M
        Sent: Tuesday, February 01, 2011 8:56 PM
        To: aprsisce@yahoogroups.com
        Subject: RE: [aprsisce] Development version (was: Shapes / ShowMe! ...)

         
        Thanks Lynn. Up and running on development ver here, shape files are working
        correctly. I will find the time to read all recent posts before asking any
        stupid questions :>)

        73 Jeff kb2m

        -----Original Message-----
        From: aprsisce@yahoogroups.com [mailto:aprsisce@yahoogroups.com] On Behalf
        Of Lynn W Deffenbaugh (Mr)
        Sent: Tuesday, February 01, 2011 20:01 PM
        To: aprsisce@yahoogroups.com
        Subject: [aprsisce] Development version (was: Shapes / ShowMe! ...)

        See http://aprsisce.wikidot.com/development-version but please be aware
        that running the bleeding edge is sometimes dangerous. I've been known
        to break things so that it won't even run, but usually I get a fixed
        version out shortly thereafter.

        Also, please plan on keeping up with the postings in this group,
        especially before accepting a new version from About.

        If you're not comfortable renaming files and editing XML files, then
        running the development is probably not a good idea.

        Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

        On 2/1/2011 6:40 PM, Jeff KB2M wrote:
        > I'm not really interested in playing with the 'shape files' but I would
        like
        > to keep my copy of APRSIS32 current. Where can I find this latest version?
        I
        > tried the about version update, but the latest I can update to is dated
        > 1/27/11.
        >
        > 73 Jeff kb2m
        >
        >
        >
        > -----Original Message-----
        > From: aprsisce@yahoogroups.com [mailto:aprsisce@yahoogroups.com] On Behalf
        > Of Fred Hillhouse
        > Sent: Tuesday, February 01, 2011 9:08 AM
        > To: aprsisce@yahoogroups.com
        > Subject: RE: [aprsisce] Re: Shapes / ShowMe! (Dev 2011/02/01 00:44)
        >
        >
        >
        > "Show Me" shuts down APSRISI32. When I restart it, the ALL is checked.
        >
        > Best regards,
        > Fred
        >
        > ________________________________
        >
        > From: aprsisce@yahoogroups.com [mailto:aprsisce@yahoogroups.com] On Behalf
        > Of n1naz
        > Sent: Tuesday, February 01, 2011 06:38
        > To: aprsisce@yahoogroups.com
        > Subject: [aprsisce] Re: Shapes / ShowMe! (Dev 2011/02/01 00:44)
        >
        >
        >
        >
        > Also be aware that if you do a "show me", the NWS/All gets checked, be
        sure
        > to un-check when your done(if you want to).
        >
        > --- In aprsisce@yahoogroups.com<mailto:aprsisce%40yahoogroups.com> ,
        "Lynn
        > W Deffenbaugh (Mr)"<kj4erj@...> wrote:
        >> Ok, so I went and did it. Here's another Development release with lots
        >> of NWS and Shapefile stuff to play with. You can read the details
        >> below, but personally I think the Configure / NWS Shapes / ShowMe is the
        >> coolest one. If you have shapefiles loaded, then center the main map
        >> somewhere and hit that menu option. Not only will one or more
        >> MultiTrack windows open for each shape that might involve the screen
        >> center point, but they'll also auto-zoom to show the entire shape! And
        >> the shapes come with nice bold borders now too.
        >>
        >> Don't be surprise, however, to see the shapes go pale gray in a short
        >> time. That's when my internally-generated object hits its expiration
        >> time and goes to a Killed status. If it's not still centered somewhere,
        >> the entire object will disappear. But it will remain in gray in the
        >> popup that had it until you either close that MultiTrack or start
        >> following some other station.
        >>
        >> This same auto-zoom feature is now the default behavior for Configure /
        >> NWS / Popup MultiTrack windows as well. And you can now choose what
        >> pops up based on Always, Only New and suppress any that don't include a
        >> defined area (shape or multiline). You can also now suppress
        >> notifications (message or MultiTrack) at the NWS Product level in
        >> Configure / NWS / Notify Products. In that menu you also get a sneak
        >> peek at the symbol used for the product as well as the "line code" which
        >> currently sets the color and line style as described at
        >> http://www.aprs-is.net/WX/MultilineProtocol.aspx.
        >>
        >> Don't panic if the filled areas disappear when you pan the map. This is
        >> by design and brings panning performance back to where I'm comfortable
        >> with it. As soon as you stop panning (release the mouse button), the
        >> shapes will reappear.
        >>
        >> There's some other stuff below, some of which is protecting the program
        >> from people that down-grade (go back to earlier versions) which can
        >> introduce issues due to automatic XML format upgrades. This release
        >> does LOTS of that, but it now also automatically saves the previous
        >> version .XML file similar to how the About updater saves the previous
        > .EXE.
        >> Let me know if you find any bugs in this pretty quickly as I'd like to
        >> get it committed and out to the General Release because of the filter
        >> bug that is fixed within it. Besides, the Release Notes is already
        >> quite substantial in such a short time.
        >>
        >> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
        >>
        >> Define APDUxx as U2APRS for Android
        >> (http://aobajoke.no-ip.org/~ja7ude/japanese/u2aprs10/indexe.html)
        >>
        >> Mark NWS objects Killed rather than simply purging them away on
        > expiration.
        >> Correct bust that allowed followed killed objects to disappear rather
        >> substantially fade until they're no longer needed.
        >>
        >> Shaped areas that are killed but centered in a MultiTrack will turn
        >> light gray until they're not centered anymore. If you look at the
        >> station info popup, it will say "KILLED OBJECT".
        >>
        >> NWS shapes are now included in Station popup menu
        >>
        >> Corrected black on black station in scrolling station logs when NWS
        >> alerts are processed. (Recursion is such an ugly word, especially when
        >> it's unexpected)
        >>
        >> If too many MultiTracks are open when an NWS alert is received and
        >> Configure / NWS / Popup MultiTrack is checked, it just quietly ignores
        >> the problem. It used to complain for every one generating LOTS of
        >> message boxes overnight.
        >>
        >> When manually panning a window, remove the multiline objects to
        >> (dramatically) improve pan responsiveness. Area fills will re-appear
        >> when the pan operation is complete (ie. when you release the mouse
        > button).
        >> Fixed Configure / Ports / APRS-IS to actually use the Enable, QuietTime,
        >> Callsign and Comment (even though the latter two are non-changeable)
        >>
        >> Change station info popup relative distance/bearing to FromCtr and
        >> FromME instead of opposite (Julian G4ILO)
        >>
        >> Add outline to the shapes so that I can see if some of them are actually
        >> TOO transparent. Please let me know the object ID if you see one like
        >> that, particularly Australia's Flood areas.
        >>
        >> Configure / NWS Shapes / ShowMe will popup individual shapes that
        >> include, or are near, the screen center of the main window when the menu
        >> option is selected.
        >>
        >> Replace Track(ObjectID) with the description of the shape for test
        >> shapes and better describe shape-expanded NWS objects.
        >>
        >> Title of windows "following" an NWS object (like the tests and
        >> auto-popups from Configure / NWS / Popup MultiTrack) are more
        informative.
        >>
        >> Configure / NWS Shapes now supports unchecking individual files. I need
        >> to add a prompt to ask if you're only disabling or would like to remove
        >> the file from the list.
        >>
        >> Whenever a version change is detected, the pre-upgraded XML files is
        >> saved as .XML.yyyymmddhhmm where yyyymmddhhmm is the previous version
        >> string that should match a saved .EXE.yyyymmddhhmm.
        >>
        >> If the program detects a version downgrade, it will warn you that some
        >> settings may be lost. This is due to the non-downgrade-compatible XML
        >> configuration upgrades that may have occurred. Proceed at your own risk.
        >>
        >> Corrected bust in shape optimizer that was causing not all of the
        >> "rings" to draw. This was particularly evident in QLC111. You should
        >> see lots more detail in AUS shapes now.
        >>
        >> Don't pop up an already-expired NWS object. WXSVR-AU does LOTS of these
        >> for some reason. I'm not sure how long they keep transmitting the
        >> NWS-CANCLs.
        >>
        >> Force a filter of m/0 if no other filter is required (Julian G4ILO)
        >> (Adam KB8VOM)
        >>
        >> Configure / NWS / Popup MultiTrack now has Always and New options.
        >> "Always" will create or focus MultiTracks for NWS objects. "New" will
        >> only do this for a newly created object.
        >>
        >> Support suppressing NWS Popups unless they describe an Area (multiline
        >> or shapefile). This avoids consuming a bunch of redundant MultiTracks
        >> for single point objects.
        >>
        >> New (possibly temporary) Packets(Internal) trace log as well as INT (vs
        >> RF or IS) flagging in both the Transmit and Packets logs. This will
        >> make identification of internally-generated packets a bit easier, in
        >> case I ever need to know such a distinction.
        >>
        >> Transmit when "T" is pressed on the keyboard (assuming the main map
        >> window is focused, otherwise Windows won't tell me you even hit a key).
        >> (Alan N6VUD)
        >>
        >> New Configure / NWS / Notify Products to individually disable the
        >> various known NWS Products (http://www.aprs-is.net/WX/ProdCodes.aspx and
        >> http://wxsvr.aprs.net.au/products.php) from triggering message
        >> notifications and MultiTrack popups. Eventually you'll be able to
        >> configure more stuff on each Product than just the enable like color,
        >> line style, symbol, -IS to RF IGate...
        >>
        >
        >
        >
        >
        >
        >
        >
        >
        > ------------------------------------
        >
        > Yahoo! Groups Links
        >
        >
        >
        >

        ------------------------------------

        Yahoo! Groups Links
      Your message has been successfully submitted and would be delivered to recipients shortly.