Loading ...
Sorry, an error occurred while loading the content.

TX Message Errors

Expand Messages
  • jcalbano
    Hello All, Having problems transmitting messages via RF on the TM-D710. From the Log below, I have some errors. Kenwoodaprs is the New Port I have configured
    Message 1 of 4 , Nov 2, 2010
    • 0 Attachment
      Hello All,

      Having problems transmitting messages via RF on the TM-D710. From the Log below, I have some errors.

      Kenwoodaprs is the New Port I have configured but the messages are never transmitted.

      Thanks for any help,

      N6TRC John



      Kenwoodaprs:2010-11-02T21:56:18.521 Status 0 Error 0 At 228 in c:\cvstest\code\aprs\aprsisce\cprtns.c
      Kenwoodaprs:2010-11-02T21:56:18.521 Error Opening COM3:9600,N,8,1 LastError 0
      Kenwoodaprs:2010-11-02T21:56:18.731 Opening COM3:9600,N,8,1
      Kenwoodaprs:2010-11-02T21:56:18.731 Opening COM3 with 4 Args
      Kenwoodaprs:2010-11-02T21:56:18.731 Opening COM3 Got -1 Error 5
      Kenwoodaprs:2010-11-02T21:56:18.731 Status 0 Error 0 At 228 in c:\cvstest\code\aprs\aprsisce\cprtns.c
      Kenwoodaprs:2010-11-02T21:56:18.731 Error Opening COM3:9600,N,8,1 LastError 0
      Kenwoodaprs:2010-11-02T21:56:23.522 Opening COM3:9600,N,8,1
      Kenwoodaprs:2010-11-02T21:56:23.522 Opening COM3 with 4 Args
      Kenwoodaprs:2010-11-02T21:56:23.522 Opening COM3 Got -1 Error 5
      Kenwoodaprs:2010-11-02T21:56:23.522 Status 0 Error 0 At 228 in c:\cvstest\code\aprs\aprsisce\cprtns.c
      Kenwoodaprs:2010-11-02T21:56:23.526 Error Opening COM3:9600,N,8,1 LastError 0
      Kenwoodaprs:2010-11-02T21:56:23.732 Opening COM3:9600,N,8,1
      Kenwoodaprs:2010-11-02T21:56:23.732 Opening COM3 with 4 Args
      Kenwoodaprs:2010-11-02T21:56:23.732 Opening COM3 Got -1 Error 5
      Kenwoodaprs:2010-11-02T21:56:23.732 Status 0 Error 0 At 228 in c:\cvstest\code\aprs\aprsisce\cprtns.c
      Kenwoodaprs:2010-11-02T21:56:23.732 Error Opening COM3:9600,N,8,1 LastError 0
    • Dan Rimell
      Interested to see, could you post your port config from the config XML as I have had similar issues which I have now solved Dan
      Message 2 of 4 , Nov 2, 2010
      • 0 Attachment
        Interested to see, could you post your port config from the config XML
        as I have had similar issues which I have now solved

        Dan

        On 02/11/2010 22:01, jcalbano wrote:
        >
        > Hello All,
        >
        > Having problems transmitting messages via RF on the TM-D710. From the
        > Log below, I have some errors.
        >
        > Kenwoodaprs is the New Port I have configured but the messages are
        > never transmitted.
        >
        > Thanks for any help,
        >
        > N6TRC John
        >
        > Kenwoodaprs:2010-11-02T21:56:18.521 Status 0 Error 0 At 228 in
        > c:\cvstest\code\aprs\aprsisce\cprtns.c
        > Kenwoodaprs:2010-11-02T21:56:18.521 Error Opening COM3:9600,N,8,1
        > LastError 0
        > Kenwoodaprs:2010-11-02T21:56:18.731 Opening COM3:9600,N,8,1
        > Kenwoodaprs:2010-11-02T21:56:18.731 Opening COM3 with 4 Args
        > Kenwoodaprs:2010-11-02T21:56:18.731 Opening COM3 Got -1 Error 5
        > Kenwoodaprs:2010-11-02T21:56:18.731 Status 0 Error 0 At 228 in
        > c:\cvstest\code\aprs\aprsisce\cprtns.c
        > Kenwoodaprs:2010-11-02T21:56:18.731 Error Opening COM3:9600,N,8,1
        > LastError 0
        > Kenwoodaprs:2010-11-02T21:56:23.522 Opening COM3:9600,N,8,1
        > Kenwoodaprs:2010-11-02T21:56:23.522 Opening COM3 with 4 Args
        > Kenwoodaprs:2010-11-02T21:56:23.522 Opening COM3 Got -1 Error 5
        > Kenwoodaprs:2010-11-02T21:56:23.522 Status 0 Error 0 At 228 in
        > c:\cvstest\code\aprs\aprsisce\cprtns.c
        > Kenwoodaprs:2010-11-02T21:56:23.526 Error Opening COM3:9600,N,8,1
        > LastError 0
        > Kenwoodaprs:2010-11-02T21:56:23.732 Opening COM3:9600,N,8,1
        > Kenwoodaprs:2010-11-02T21:56:23.732 Opening COM3 with 4 Args
        > Kenwoodaprs:2010-11-02T21:56:23.732 Opening COM3 Got -1 Error 5
        > Kenwoodaprs:2010-11-02T21:56:23.732 Status 0 Error 0 At 228 in
        > c:\cvstest\code\aprs\aprsisce\cprtns.c
        > Kenwoodaprs:2010-11-02T21:56:23.732 Error Opening COM3:9600,N,8,1
        > LastError 0
        >
        >
      • jcalbano
        The following is the config. file. Mybe it is not possible to send a message to yourself but I have tried other call signs...The message cycle though 5
        Message 3 of 4 , Nov 2, 2010
        • 0 Attachment
          The following is the config. file. Mybe it is not possible to send a message to yourself but I have tried other call signs...The message cycle though 5 retries and not sent also, Google Map APRS does not show the message in the packet.

          WinMain:2010-11-02T23:17:03.369 GetXmlConfigFile=APRSIS32.xml
          WinMain:2010-11-02T23:17:03.369 LoadXmlConfigFile(APRSIS32.xml)
          WinMain:2010-11-02T23:17:03.377 GetXmlConfigFile=APRSIS32.xml
          WinMain:2010-11-02T23:17:03.377 GetXmlConfigFile=APRSIS32-Safe.xml
          WinMain:2010-11-02T23:17:03.379 Copied Good Config(APRSIS32.xml) To(APRSIS32-Safe.xml)
          WinMain:2010-11-02T23:17:03.380 No Value(00000000) or eCount(4) for Struct(RFID)
          WinMain:2010-11-02T23:17:03.380 No Value(00000000) or eCount(17) for Struct(RFPort)
          WinMain:2010-11-02T23:17:03.380 No Value(00000000) or eCount(15) for Struct(Object)
          WinMain:2010-11-02T23:17:03.380 No Value(00000000) or eCount(8) for Struct(Bulletin)
          WinMain:2010-11-02T23:17:03.380 No Value(00000000) or eCount(8) for Struct(CQGroup)
          WinMain:2010-11-02T23:17:03.380 No Value(00000000) or eCount(6) for Struct(ANDefinition)
          WinMain:2010-11-02T23:17:03.380 LoadConfiguration WORKED!
          WinMain:2010-11-02T23:17:03.380 Prompting for Configuration
          WinMain:2010-11-02T23:17:03.450 GetXmlConfigFile=APRSIS32.xml
          WinMain:2010-11-02T23:17:03.450 LoadXmlConfigFile(APRSIS32.xml)
          WinMain:2010-11-02T23:17:03.456 GetXmlConfigFile=APRSIS32.xml
          WinMain:2010-11-02T23:17:03.456 GetXmlConfigFile=APRSIS32-Safe.xml
          WinMain:2010-11-02T23:17:03.459 Copied Good Config(APRSIS32.xml) To(APRSIS32-Safe.xml)
          WinMain:2010-11-02T23:17:03.459 No Value(00000000) or eCount(4) for Struct(RFID)
          WinMain:2010-11-02T23:17:03.459 No Value(00000000) or eCount(17) for Struct(RFPort)
          WinMain:2010-11-02T23:17:03.459 No Value(00000000) or eCount(15) for Struct(Object)
          WinMain:2010-11-02T23:17:03.459 No Value(00000000) or eCount(8) for Struct(Bulletin)
          WinMain:2010-11-02T23:17:03.459 No Value(00000000) or eCount(8) for Struct(CQGroup)
          WinMain:2010-11-02T23:17:03.459 No Value(00000000) or eCount(6) for Struct(ANDefinition)
          WinMain:2010-11-02T23:17:03.459 LoadConfiguration WORKED!
          WinMain:2010-11-02T23:17:03.459 Prompting for Configuration
          WinMain:2010-11-02T23:17:03.460 Probe OSM(./OSMTiles/APRSIS32.osm) Worked!
          WinMain:2010-11-02T23:17:03.460 OSMPath(./OSMTiles/) Contains ONLY OSM Data
          WinMain:2010-11-02T23:17:03.684 Probe OSM(./OSMTiles/APRSIS32.osm) Worked!
          WinMain:2010-11-02T23:17:03.684 OSMPath(./OSMTiles/) Contains ONLY OSM Data
          WinMain:2010-11-02T23:17:34.317 WM_CLOSE Port ending with Cancel


          --- In aprsisce@yahoogroups.com, "jcalbano" <jcalbano@...> wrote:
          >
          > Hello All,
          >
          > Having problems transmitting messages via RF on the TM-D710. From the Log below, I have some errors.
          >
          > Kenwoodaprs is the New Port I have configured but the messages are never transmitted.
          >
          > Thanks for any help,
          >
          > N6TRC John
          >
          >
          >
          > Kenwoodaprs:2010-11-02T21:56:18.521 Status 0 Error 0 At 228 in c:\cvstest\code\aprs\aprsisce\cprtns.c
          > Kenwoodaprs:2010-11-02T21:56:18.521 Error Opening COM3:9600,N,8,1 LastError 0
          > Kenwoodaprs:2010-11-02T21:56:18.731 Opening COM3:9600,N,8,1
          > Kenwoodaprs:2010-11-02T21:56:18.731 Opening COM3 with 4 Args
          > Kenwoodaprs:2010-11-02T21:56:18.731 Opening COM3 Got -1 Error 5
          > Kenwoodaprs:2010-11-02T21:56:18.731 Status 0 Error 0 At 228 in c:\cvstest\code\aprs\aprsisce\cprtns.c
          > Kenwoodaprs:2010-11-02T21:56:18.731 Error Opening COM3:9600,N,8,1 LastError 0
          > Kenwoodaprs:2010-11-02T21:56:23.522 Opening COM3:9600,N,8,1
          > Kenwoodaprs:2010-11-02T21:56:23.522 Opening COM3 with 4 Args
          > Kenwoodaprs:2010-11-02T21:56:23.522 Opening COM3 Got -1 Error 5
          > Kenwoodaprs:2010-11-02T21:56:23.522 Status 0 Error 0 At 228 in c:\cvstest\code\aprs\aprsisce\cprtns.c
          > Kenwoodaprs:2010-11-02T21:56:23.526 Error Opening COM3:9600,N,8,1 LastError 0
          > Kenwoodaprs:2010-11-02T21:56:23.732 Opening COM3:9600,N,8,1
          > Kenwoodaprs:2010-11-02T21:56:23.732 Opening COM3 with 4 Args
          > Kenwoodaprs:2010-11-02T21:56:23.732 Opening COM3 Got -1 Error 5
          > Kenwoodaprs:2010-11-02T21:56:23.732 Status 0 Error 0 At 228 in c:\cvstest\code\aprs\aprsisce\cprtns.c
          > Kenwoodaprs:2010-11-02T21:56:23.732 Error Opening COM3:9600,N,8,1 LastError 0
          >
        • Lynn W Deffenbaugh (Mr)
          That error has nothing to do with sending messages, but has everything to do with the fact that there is either no COM3 on your PC or COM3 is open by some
          Message 4 of 4 , Nov 2, 2010
          • 0 Attachment
            That error has nothing to do with sending messages, but has everything
            to do with the fact that there is either no COM3 on your PC or COM3 is
            open by some other program. If you watch the APRS OK pane (and shorten
            your RF Port's name), you'll see that the RF Port never achieves an OK
            status.

            So, check with Device Manager to find out if you have a COM3 and then
            make sure any and all other programs that might be using it are closed.

            Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

            jcalbano wrote:
            > Hello All,
            >
            > Having problems transmitting messages via RF on the TM-D710. From the Log below, I have some errors.
            >
            > Kenwoodaprs is the New Port I have configured but the messages are never transmitted.
            >
            > Thanks for any help,
            >
            > N6TRC John
            >
            >
            >
            > Kenwoodaprs:2010-11-02T21:56:18.521 Status 0 Error 0 At 228 in c:\cvstest\code\aprs\aprsisce\cprtns.c
            > Kenwoodaprs:2010-11-02T21:56:18.521 Error Opening COM3:9600,N,8,1 LastError 0
            > Kenwoodaprs:2010-11-02T21:56:18.731 Opening COM3:9600,N,8,1
            > Kenwoodaprs:2010-11-02T21:56:18.731 Opening COM3 with 4 Args
            > Kenwoodaprs:2010-11-02T21:56:18.731 Opening COM3 Got -1 Error 5
            > Kenwoodaprs:2010-11-02T21:56:18.731 Status 0 Error 0 At 228 in c:\cvstest\code\aprs\aprsisce\cprtns.c
            > Kenwoodaprs:2010-11-02T21:56:18.731 Error Opening COM3:9600,N,8,1 LastError 0
            > Kenwoodaprs:2010-11-02T21:56:23.522 Opening COM3:9600,N,8,1
            > Kenwoodaprs:2010-11-02T21:56:23.522 Opening COM3 with 4 Args
            > Kenwoodaprs:2010-11-02T21:56:23.522 Opening COM3 Got -1 Error 5
            > Kenwoodaprs:2010-11-02T21:56:23.522 Status 0 Error 0 At 228 in c:\cvstest\code\aprs\aprsisce\cprtns.c
            > Kenwoodaprs:2010-11-02T21:56:23.526 Error Opening COM3:9600,N,8,1 LastError 0
            > Kenwoodaprs:2010-11-02T21:56:23.732 Opening COM3:9600,N,8,1
            > Kenwoodaprs:2010-11-02T21:56:23.732 Opening COM3 with 4 Args
            > Kenwoodaprs:2010-11-02T21:56:23.732 Opening COM3 Got -1 Error 5
            > Kenwoodaprs:2010-11-02T21:56:23.732 Status 0 Error 0 At 228 in c:\cvstest\code\aprs\aprsisce\cprtns.c
            > Kenwoodaprs:2010-11-02T21:56:23.732 Error Opening COM3:9600,N,8,1 LastError 0
            >
          Your message has been successfully submitted and would be delivered to recipients shortly.