Loading ...
Sorry, an error occurred while loading the content.

Re: [aprsisce] PreFetch and DigixForm.

Expand Messages
  • Lynn W Deffenbaugh (Mr)
    For Igates and Digis, I also keep a copy of the Transmit log open and enabled as well as Enables / Rf Ports / Log All. This gives me a record (in the
    Message 1 of 6 , Nov 2, 2010
    • 0 Attachment
      For Igates and Digis, I also keep a copy of the Transmit log open and
      enabled as well as Enables / Rf Ports / Log All. This gives me a record
      (in the APRSIS32*.LOG and *.PKT files) of what I've been doing on RF.

      Thanks for the config file. I received it already.

      Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

      Dan Rimell wrote:
      > Thats excellent, Ill email you the config off group. Looking at the digi
      > log it is working.
      >
      > Thanks
      > Dan
      >
      > On 02/11/2010 13:06, Lynn W Deffenbaugh (Mr) wrote:
      >
      >> As a final note, you can Enables / View Logs / Digi and then click
      >> Enable in that window's menu. Any Digipeater action (or inaction) will
      >> show up there.
      >>
      >> Thanks for the updated config. Now, if I can manage to not misplace it
      >> until I get it in the wiki...
      >>
      >> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
      >>
      >> Dan Rimell wrote:
      >>
      >>> Thanks for Clearing That Up
      >>>
      >>> That below was my latest port config, Following your information below I
      >>> have now changed it , Another copy. All understood regarding the
      >>> prefetch, will try and watch the yellow circle :).
      >>>
      >>> Below is the latest config, yet to see any digi's as there are no
      >>> mobiles in range of me at the moment
      >>>
      >>> Thanks
      >>> Dan
      >>> M0MST
      >>>
      >>> <Enables.APRSIS>1</Enables.APRSIS>
      >>> <Enables.RFPorts>1</Enables.RFPorts>
      >>> <Enables.RFPktLog>1</Enables.RFPktLog>
      >>> <Enables.RFReceiveOnly>0</Enables.RFReceiveOnly>
      >>> <Enables.GPS>0</Enables.GPS>
      >>> <Enables.OSMFetch>1</Enables.OSMFetch>
      >>> <Enables.Sound>0</Enables.Sound>
      >>> <Enables.NotifyOnNewBulletin>0</Enables.NotifyOnNewBulletin>
      >>> <Enables.CSVFile>1</Enables.CSVFile>
      >>> <Enables.AutoSaveGPX>1</Enables.AutoSaveGPX>
      >>> <Enables.Beacons>1</Enables.Beacons>
      >>> <Enables.Telemetry>0</Enables.Telemetry>
      >>> <Enables.AllMessages>0</Enables.AllMessages>
      >>> <Enables.MyMessages>1</Enables.MyMessages>
      >>> <Enables.HideQueries>0</Enables.HideQueries>
      >>> <Enables.NotifyOnQuery>1</Enables.NotifyOnQuery>
      >>> <Enables.NotifyOnNewMessage>1</Enables.NotifyOnNewMessage>
      >>> <Enables.Debug>0</Enables.Debug>
      >>> <Genius.MinTime>10</Genius.MinTime>
      >>> <Genius.MaxTime>30</Genius.MaxTime>
      >>> <Genius.TimeOnly>0</Genius.TimeOnly>
      >>> <Genius.StartStop>1</Genius.StartStop>
      >>> <Genius.BearingChange>30</Genius.BearingChange>
      >>> <Genius.ForecastError>0.10</Genius.ForecastError>
      >>> <Genius.MaxDistance>1.00</Genius.MaxDistance>
      >>> <Symbol.Table>/</Symbol.Table>
      >>> <Symbol.Symbol>#</Symbol.Symbol>
      >>> <Beacon.Timestamp>1</Beacon.Timestamp>
      >>> <Beacon.HHMMSS>1</Beacon.HHMMSS>
      >>> <Beacon.CourseSpeed>1</Beacon.CourseSpeed>
      >>> <Beacon.Altitude>1</Beacon.Altitude>
      >>> <Beacon.Why>1</Beacon.Why>
      >>> <Beacon.Comment>1</Beacon.Comment>
      >>> <Beacon.DAO>0</Beacon.DAO>
      >>> <Status.Enabled>1</Status.Enabled>
      >>> <Status.Interval>10</Status.Interval>
      >>> <Status.Timestamp>1</Status.Timestamp>
      >>> <Status.GridSquare>1</Status.GridSquare>
      >>> <Status.Text>APRSISCE/32 DIGI</Status.Text>
      >>> <Status.Choice>APRSISCE/32 DIGI</Status.Choice>
      >>> <Status.LastSent>2010-11-02T12:49:45</Status.LastSent>
      >>> <Scale>14.5686</Scale>
      >>> <Orientation>2</Orientation>
      >>> <Latitude>52.131434</Latitude>
      >>> <Longitude>-1.789009</Longitude>
      >>> <Altitude>0.0000</Altitude>
      >>> <BeaconPath>RAYNET-1,WIDE1-1,WIDE2-2</BeaconPath>
      >>> <EMailServer>EMAIL-2</EMailServer>
      >>> <WhoIsServer>WHO-IS</WhoIsServer>
      >>> <!--MessageGroup-->
      >>> <OSM.Zoom>10</OSM.Zoom>
      >>> <OSM.Percent>50</OSM.Percent>
      >>> <OSM.Server>tile.openstreetmap.org</OSM.Server>
      >>> <OSM.Port>80</OSM.Port>
      >>> <OSM.URLPrefix>/</OSM.URLPrefix>
      >>> <OSM.Path>C:/Documents and
      >>> Settings/Dan/Desktop/APRS/APRSIS-CE/OSMTiles/</OSM.Path>
      >>> <OSM.MinMBFree>8</OSM.MinMBFree>
      >>> <OSM.RetainDays>7</OSM.RetainDays>
      >>> <OSM.RetainZoom>5</OSM.RetainZoom>
      >>> <OSM.RevisionHours>0</OSM.RevisionHours>
      >>> <MultiTrack.width>0</MultiTrack.width>
      >>> <MultiTrack.height>0</MultiTrack.height>
      >>> <MultiTrack.Orientation>2</MultiTrack.Orientation>
      >>> <MultiTrack.Percent>50</MultiTrack.Percent>
      >>> <MultiTrack.Zoom>11</MultiTrack.Zoom>
      >>> <MultiTrack.Scale>8.0000</MultiTrack.Scale>
      >>> <WindowPlacement.x>88</WindowPlacement.x>
      >>> <WindowPlacement.y>116</WindowPlacement.y>
      >>> <WindowPlacement.width>960</WindowPlacement.width>
      >>> <WindowPlacement.height>554</WindowPlacement.height>
      >>> <View.ConfirmOnClose>0</View.ConfirmOnClose>
      >>> <View.Metric.Altitude>0</View.Metric.Altitude>
      >>> <View.Metric.Distance>0</View.Metric.Distance>
      >>> <View.Metric.Pressure>0</View.Metric.Pressure>
      >>> <View.Metric.Rainfall>0</View.Metric.Rainfall>
      >>> <View.Metric.Temperature>0</View.Metric.Temperature>
      >>> <View.Metric.Windspeed>0</View.Metric.Windspeed>
      >>> <View.VisibleLabelsMax>50</View.VisibleLabelsMax>
      >>> <View.Altitude>1</View.Altitude>
      >>> <View.Callsign>1</View.Callsign>
      >>> <View.Callsign.NotMe>0</View.Callsign.NotMe>
      >>> <View.Callsign.NotMine>0</View.Callsign.NotMine>
      >>> <View.Speed.Beaconed>1</View.Speed.Beaconed>
      >>> <View.Speed.Calculated>0</View.Speed.Calculated>
      >>> <View.Speed.Averaged>0</View.Speed.Averaged>
      >>> <View.Weather>1</View.Weather>
      >>> <View.ZoomReverse>1</View.ZoomReverse>
      >>> <View.ZoomMin>0</View.ZoomMin>
      >>> <View.ZoomMax>23</View.ZoomMax>
      >>> <View.WheelDelta>4</View.WheelDelta>
      >>> <View.ScrollInternals>1</View.ScrollInternals>
      >>> <Screen.DateSeconds>2367</Screen.DateSeconds>
      >>> <Screen.DateTime>1</Screen.DateTime>
      >>> <Screen.Altitude>1</Screen.Altitude>
      >>> <Screen.GridSquare>1</Screen.GridSquare>
      >>> <Screen.LatLon>1</Screen.LatLon>
      >>> <Screen.Satellites>1</Screen.Satellites>
      >>> <Screen.Tracks>1</Screen.Tracks>
      >>> <Screen.Circle>1</Screen.Circle>
      >>> <Screen.RedDot>1</Screen.RedDot>
      >>> <Screen.CrossHairs>1</Screen.CrossHairs>
      >>> <Screen.CrossHairTime>1000</Screen.CrossHairTime>
      >>> <View.Custom.Primary></View.Custom.Primary>
      >>> <View.Custom.Alternate></View.Custom.Alternate>
      >>> <View.Flight.Primary>'O^</View.Flight.Primary>
      >>> <View.Flight.Alternate>^</View.Flight.Alternate>
      >>> <View.Mobile.Primary>!'<=>()*0CFOPRSUXY[\^abefgjkpsuv</View.Mobile.Primary>
      >>> <View.Mobile.Alternate>>KOS^ksuv</View.Mobile.Alternate>
      >>> <View.Weather.Primary>_W</View.Weather.Primary>
      >>> <View.Weather.Alternate>([*:<@BDEFGHIJTUW_efgptwy{</View.Weather.Alternate>
      >>> <Center.Latitude>52.147551</Center.Latitude>
      >>> <Center.Longitude>-1.447993</Center.Longitude>
      >>> <Preferred.Latitude>0.000000</Preferred.Latitude>
      >>> <Preferred.Longitude>0.000000</Preferred.Longitude>
      >>> <Preferred.Zoom>0</Preferred.Zoom>
      >>> <Preferred.Scale>8.0000</Preferred.Scale>
      >>> <Preferred.Orientation>0</Preferred.Orientation>
      >>> <Tracking.Call>G6MMD-7</Tracking.Call>
      >>> <Tracking.Center>0</Tracking.Center>
      >>> <Tracking.Locked>0</Tracking.Locked>
      >>> <APRSISPort>@...:14578</APRSISPort>
      >>> <GPSPort></GPSPort>
      >>>
      >>>
      >>> <!--RFPort[0]-->
      >>> <RFPort Name="agw">
      >>> <Protocol>AGW</Protocol>
      >>> <Device>@LOCALHOST:8000</Device>
      >>> <RfBaud>1200</RfBaud>
      >>> <!--OpenCmd-->
      >>> <!--CloseCmd-->
      >>> <QuietTime>0</QuietTime>
      >>> <Enabled>0</Enabled>
      >>> <XmitEnabled>1</XmitEnabled>
      >>> <RFtoISEnabled>1</RFtoISEnabled>
      >>> <IStoRFEnabled>1</IStoRFEnabled>
      >>> <MyCallNot3rd>0</MyCallNot3rd>
      >>> <BeaconingEnabled>1</BeaconingEnabled>
      >>> <BeaconPath></BeaconPath>
      >>> <TelemetryEnabled>0</TelemetryEnabled>
      >>> <TelemetryPath></TelemetryPath>
      >>> <!--DigiXform-->
      >>> </RFPort>
      >>> <!--RFPort[0]-->
      >>>
      >>> <!--RFPort[1]-->
      >>> <RFPort Name="d710tes">
      >>> <Protocol>KWD710(Pkt)</Protocol>
      >>> <Device>COM3:19200,N,8,1</Device>
      >>> <RfBaud>1200</RfBaud>
      >>> <OpenCmd>^C^C^C~!!0</OpenCmd>
      >>> <OpenCmd>TC 1!?</OpenCmd>
      >>> <OpenCmd>TC 1!TS 1</OpenCmd>
      >>> <OpenCmd>TN 2,1!TN 2,1</OpenCmd>
      >>> <OpenCmd>^M!cmd:!5</OpenCmd>
      >>> <OpenCmd>DIG ON</OpenCmd>
      >>> <OpenCmd>GB 4800</OpenCmd>
      >>> <OpenCmd>HB 1200</OpenCmd>
      >>> <OpenCmd>GPST $GPRMC</OpenCmd>
      >>> <OpenCmd>LTM 10</OpenCmd>
      >>> <OpenCmd>LTMH OFF</OpenCmd>
      >>> <OpenCmd>LOC E 0</OpenCmd>
      >>> <OpenCmd>M ON</OpenCmd>
      >>> <OpenCmd>MCOM ON</OpenCmd>
      >>> <OpenCmd>MS OFF</OpenCmd>
      >>> <OpenCmd>CONO OFF</OpenCmd>
      >>> <OpenCmd>P 250</OpenCmd>
      >>> <OpenCmd>UI OFF</OpenCmd>
      >>> <OpenCmd>UIF NOID</OpenCmd>
      >>> <OpenCmd>UIT %</OpenCmd>
      >>> <OpenCmd>X OFF</OpenCmd>
      >>> <OpenCmd>HEADER OFF</OpenCmd>
      >>> <OpenCmd>NE ON</OpenCmd>
      >>> <OpenCmd>NO OFF</OpenCmd>
      >>> <OpenCmd>ECHO OFF!cmd:!1.0</OpenCmd>
      >>> <OpenCmd>BEACON EVERY 0!cmd:!1.0</OpenCmd>
      >>> <OpenCmd>ECHO OFF!cmd:!1.00</OpenCmd>
      >>> <OpenCmd>BEACON EVERY 0!cmd:!1.00</OpenCmd>
      >>> <OpenCmd>^C^C^C~!!0</OpenCmd>
      >>> <CloseCmd>^M!cmd:!1</CloseCmd>
      >>> <CloseCmd>LTM 0</CloseCmd>
      >>> <CloseCmd>TC 1!TS 1</CloseCmd>
      >>> <CloseCmd>TN 0,0!TN 0,0</CloseCmd>
      >>> <QuietTime>0</QuietTime>
      >>> <Enabled>1</Enabled>
      >>> <XmitEnabled>1</XmitEnabled>
      >>> <RFtoISEnabled>1</RFtoISEnabled>
      >>> <IStoRFEnabled>1</IStoRFEnabled>
      >>> <MyCallNot3rd>0</MyCallNot3rd>
      >>> <BeaconingEnabled>1</BeaconingEnabled>
      >>> <BeaconPath></BeaconPath>
      >>> <TelemetryEnabled>0</TelemetryEnabled>
      >>> <TelemetryPath></TelemetryPath>
      >>> <!--DigiXform-->
      >>> </RFPort>
      >>> <!--RFPort[1]-->
      >>>
      >>> <DigiXform>WIDE1-1=WIDE1*</DigiXform>
      >>> <DigiXform>WIDE2-1=WIDE2*</DigiXform>
      >>> <DigiXform>WIDE2-2=WIDE2-1</DigiXform>
      >>>
      >>>
      >>>
      >>> On 02/11/2010 12:21, Lynn W Deffenbaugh (Mr) wrote:
      >>>
      >>>
      >>>> Dan Rimell wrote:
      >>>>
      >>>>
      >>>>> Just a few queries with issues I am having. I managed to solve the
      >>>>>
      >>>>>
      >>>> issue
      >>>>
      >>>>
      >>>>> with enabling Band B as the correct TNC Band with trail and error.
      >>>>>
      >>>>>
      >>>>>
      >>>> Can you post your final<RfPort> section, particularly the<OpenCmd>s
      >>>> and<CloseCmd>s? Or confirm that the latest one is the one listed
      >>>> below? When I get to it, I'm hoping to add pages to the Wiki for the
      >>>> various setups.
      >>>>
      >>>>
      >>>>
      >>>>> I did see the topic yesterday regarding mapping, which reminded me of
      >>>>> something I have always had trouble with. Whenever I select the "pre
      >>>>> fetch" option it will cause the software to "pause". By this I mean it
      >>>>> states queued 2804\2975 tiles, and doesnt move forward. There seems to
      >>>>> be no internet activity apart from the APRSIS feed. Wonder if im doing
      >>>>> something wrong.
      >>>>>
      >>>>>
      >>>>>
      >>>> There's a pregnant pause before it throws up the information box that
      >>>> you mention while it tries to figure out how many tiles it needs versus
      >>>> how many tiles are already in the cache. When you clear the
      >>>> confirmation, all of the needed tiles are queued for fetching. There
      >>>> should be a (really tiny at first) yellow circle that will expand out to
      >>>> the range circle as the queue is worked off. This is the tile fetcher
      >>>> progress indicator. You can also double-click any empty map section and
      >>>> see the current state of the tile fetcher queue and threads.
      >>>>
      >>>> If you're using pre-fetch, you'll want to remember to disable the purger
      >>>> (http://aprsisce.wikidot.com/moving-osmtiles) or your tiles will
      >>>> disappear after a while.
      >>>>
      >>>>
      >>>>
      >>>>> DigiXForm - I have got three lines in here which I have added many
      >>>>> months ago, However I am sure they are wrong, as I am not actually
      >>>>> passing any digi traffic. I wonder if anyone can spot a mistake in this
      >>>>> con-fig below. I wonder if any of the Stations based in the UK have
      >>>>> suggestions for best practice, I find reading material for UK APRS
      >>>>> operations rare and hard to find.
      >>>>>
      >>>>>
      >>>>>
      >>>> http://aprsisce.wikidot.com/digipeating is the Wiki page on digipeating
      >>>> and<DigiXForm>. These elements only work OUTSIDE of any RfPort at this
      >>>> time. In some future revision, they'll be port-specific (hence the
      >>>> placeholder), but for now, it's the global set that count. So, if you
      >>>> move your set of three outside of the RfPort and replace the commented
      >>>> one that's outside of that/those element(s), you should start digipeating.
      >>>>
      >>>> As far as I know, the UK and EU has adopted the "new paradigm" WIDEn-N,
      >>>> so your lines look right if you've got a good RF placement and want to
      >>>> run a WIDE2 digi. If you don't have large coverage, and only want to
      >>>> run a WIDE1 fill-in (which is what I run off 20' of my tower), just keep
      >>>> the first line (but I suspect you already understood that part).
      >>>>
      >>>> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
      >>>>
      >>>>
      >>>>
      >>>>> Thanks
      >>>>> Dan
      >>>>> M0MST
      >>>>>
      >>>>> _______
      >>>>>
      >>>>> <!--RFPort[1]-->
      >>>>> <RFPort Name="d710tes">
      >>>>> <Protocol>KWD710(Pkt)</Protocol>
      >>>>> <Device>COM3:19200,N,8,1</Device>
      >>>>> <RfBaud>1200</RfBaud>
      >>>>> <OpenCmd>^C^C^C~!!0</OpenCmd>
      >>>>> <OpenCmd>TC 1!?</OpenCmd>
      >>>>> <OpenCmd>TC 1!TS 1</OpenCmd>
      >>>>> <OpenCmd>TN 2,1!TN 2,1</OpenCmd>
      >>>>> <OpenCmd>^M!cmd:!5</OpenCmd>
      >>>>> <OpenCmd>DIG OFF</OpenCmd>
      >>>>> <OpenCmd>GB 4800</OpenCmd>
      >>>>> <OpenCmd>HB 1200</OpenCmd>
      >>>>> <OpenCmd>GPST $GPRMC</OpenCmd>
      >>>>> <OpenCmd>LTM 10</OpenCmd>
      >>>>> <OpenCmd>LTMH OFF</OpenCmd>
      >>>>> <OpenCmd>LOC E 0</OpenCmd>
      >>>>> <OpenCmd>M ON</OpenCmd>
      >>>>> <OpenCmd>MCOM ON</OpenCmd>
      >>>>> <OpenCmd>MS OFF</OpenCmd>
      >>>>> <OpenCmd>CONO OFF</OpenCmd>
      >>>>> <OpenCmd>P 250</OpenCmd>
      >>>>> <OpenCmd>UI OFF</OpenCmd>
      >>>>> <OpenCmd>UIF NOID</OpenCmd>
      >>>>> <OpenCmd>UIT %</OpenCmd>
      >>>>> <OpenCmd>X OFF</OpenCmd>
      >>>>> <OpenCmd>HEADER OFF</OpenCmd>
      >>>>> <OpenCmd>NE ON</OpenCmd>
      >>>>> <OpenCmd>NO OFF</OpenCmd>
      >>>>> <OpenCmd>ECHO OFF!cmd:!1.0</OpenCmd>
      >>>>> <OpenCmd>BEACON EVERY 0!cmd:!1.0</OpenCmd>
      >>>>> <OpenCmd>ECHO OFF!cmd:!1.00</OpenCmd>
      >>>>> <OpenCmd>BEACON EVERY 0!cmd:!1.00</OpenCmd>
      >>>>> <OpenCmd>^C^C^C~!!0</OpenCmd>
      >>>>> <CloseCmd>^M!cmd:!1</CloseCmd>
      >>>>> <CloseCmd>LTM 0</CloseCmd>
      >>>>> <CloseCmd>TC 1!TS 1</CloseCmd>
      >>>>> <CloseCmd>TN 0,0!TN 0,0</CloseCmd>
      >>>>> <QuietTime>0</QuietTime>
      >>>>> <Enabled>1</Enabled>
      >>>>> <XmitEnabled>1</XmitEnabled>
      >>>>> <RFtoISEnabled>1</RFtoISEnabled>
      >>>>> <IStoRFEnabled>1</IStoRFEnabled>
      >>>>> <MyCallNot3rd>0</MyCallNot3rd>
      >>>>> <BeaconingEnabled>1</BeaconingEnabled>
      >>>>> <BeaconPath></BeaconPath>
      >>>>> <TelemetryEnabled>0</TelemetryEnabled>
      >>>>> <TelemetryPath></TelemetryPath>
      >>>>> <!--DigiXform-->
      >>>>> <DigiXform>WIDE1-1=WIDE1*</DigiXform>
      >>>>> <DigiXform>WIDE2-1=WIDE2*</DigiXform>
      >>>>> <DigiXform>WIDE2-2=WIDE2-1</DigiXform>
      >>>>> </RFPort>
      >>>>> <!--RFPort[1]-->
      >>>>>
      >>>>>
      >>>>>
      >>> ------------------------------------
      >>>
      >>> Yahoo! Groups Links
      >>>
      >>>
      >>>
      >>>
      >>>
      >>>
      >> ------------------------------------
      >>
      >> Yahoo! Groups Links
      >>
      >>
      >>
      >>
      >
      >
      > ------------------------------------
      >
      > Yahoo! Groups Links
      >
      >
      >
      >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.