Loading ...
Sorry, an error occurred while loading the content.

Re: [aprsisce] PreFetch and DigixForm.

Expand Messages
  • Lynn W Deffenbaugh (Mr)
    As a final note, you can Enables / View Logs / Digi and then click Enable in that window s menu. Any Digipeater action (or inaction) will show up there.
    Message 1 of 6 , Nov 2, 2010
    • 0 Attachment
      As a final note, you can Enables / View Logs / Digi and then click
      Enable in that window's menu. Any Digipeater action (or inaction) will
      show up there.

      Thanks for the updated config. Now, if I can manage to not misplace it
      until I get it in the wiki...

      Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

      Dan Rimell wrote:
      > Thanks for Clearing That Up
      >
      > That below was my latest port config, Following your information below I
      > have now changed it , Another copy. All understood regarding the
      > prefetch, will try and watch the yellow circle :).
      >
      > Below is the latest config, yet to see any digi's as there are no
      > mobiles in range of me at the moment
      >
      > Thanks
      > Dan
      > M0MST
      >
      > <Enables.APRSIS>1</Enables.APRSIS>
      > <Enables.RFPorts>1</Enables.RFPorts>
      > <Enables.RFPktLog>1</Enables.RFPktLog>
      > <Enables.RFReceiveOnly>0</Enables.RFReceiveOnly>
      > <Enables.GPS>0</Enables.GPS>
      > <Enables.OSMFetch>1</Enables.OSMFetch>
      > <Enables.Sound>0</Enables.Sound>
      > <Enables.NotifyOnNewBulletin>0</Enables.NotifyOnNewBulletin>
      > <Enables.CSVFile>1</Enables.CSVFile>
      > <Enables.AutoSaveGPX>1</Enables.AutoSaveGPX>
      > <Enables.Beacons>1</Enables.Beacons>
      > <Enables.Telemetry>0</Enables.Telemetry>
      > <Enables.AllMessages>0</Enables.AllMessages>
      > <Enables.MyMessages>1</Enables.MyMessages>
      > <Enables.HideQueries>0</Enables.HideQueries>
      > <Enables.NotifyOnQuery>1</Enables.NotifyOnQuery>
      > <Enables.NotifyOnNewMessage>1</Enables.NotifyOnNewMessage>
      > <Enables.Debug>0</Enables.Debug>
      > <Genius.MinTime>10</Genius.MinTime>
      > <Genius.MaxTime>30</Genius.MaxTime>
      > <Genius.TimeOnly>0</Genius.TimeOnly>
      > <Genius.StartStop>1</Genius.StartStop>
      > <Genius.BearingChange>30</Genius.BearingChange>
      > <Genius.ForecastError>0.10</Genius.ForecastError>
      > <Genius.MaxDistance>1.00</Genius.MaxDistance>
      > <Symbol.Table>/</Symbol.Table>
      > <Symbol.Symbol>#</Symbol.Symbol>
      > <Beacon.Timestamp>1</Beacon.Timestamp>
      > <Beacon.HHMMSS>1</Beacon.HHMMSS>
      > <Beacon.CourseSpeed>1</Beacon.CourseSpeed>
      > <Beacon.Altitude>1</Beacon.Altitude>
      > <Beacon.Why>1</Beacon.Why>
      > <Beacon.Comment>1</Beacon.Comment>
      > <Beacon.DAO>0</Beacon.DAO>
      > <Status.Enabled>1</Status.Enabled>
      > <Status.Interval>10</Status.Interval>
      > <Status.Timestamp>1</Status.Timestamp>
      > <Status.GridSquare>1</Status.GridSquare>
      > <Status.Text>APRSISCE/32 DIGI</Status.Text>
      > <Status.Choice>APRSISCE/32 DIGI</Status.Choice>
      > <Status.LastSent>2010-11-02T12:49:45</Status.LastSent>
      > <Scale>14.5686</Scale>
      > <Orientation>2</Orientation>
      > <Latitude>52.131434</Latitude>
      > <Longitude>-1.789009</Longitude>
      > <Altitude>0.0000</Altitude>
      > <BeaconPath>RAYNET-1,WIDE1-1,WIDE2-2</BeaconPath>
      > <EMailServer>EMAIL-2</EMailServer>
      > <WhoIsServer>WHO-IS</WhoIsServer>
      > <!--MessageGroup-->
      > <OSM.Zoom>10</OSM.Zoom>
      > <OSM.Percent>50</OSM.Percent>
      > <OSM.Server>tile.openstreetmap.org</OSM.Server>
      > <OSM.Port>80</OSM.Port>
      > <OSM.URLPrefix>/</OSM.URLPrefix>
      > <OSM.Path>C:/Documents and
      > Settings/Dan/Desktop/APRS/APRSIS-CE/OSMTiles/</OSM.Path>
      > <OSM.MinMBFree>8</OSM.MinMBFree>
      > <OSM.RetainDays>7</OSM.RetainDays>
      > <OSM.RetainZoom>5</OSM.RetainZoom>
      > <OSM.RevisionHours>0</OSM.RevisionHours>
      > <MultiTrack.width>0</MultiTrack.width>
      > <MultiTrack.height>0</MultiTrack.height>
      > <MultiTrack.Orientation>2</MultiTrack.Orientation>
      > <MultiTrack.Percent>50</MultiTrack.Percent>
      > <MultiTrack.Zoom>11</MultiTrack.Zoom>
      > <MultiTrack.Scale>8.0000</MultiTrack.Scale>
      > <WindowPlacement.x>88</WindowPlacement.x>
      > <WindowPlacement.y>116</WindowPlacement.y>
      > <WindowPlacement.width>960</WindowPlacement.width>
      > <WindowPlacement.height>554</WindowPlacement.height>
      > <View.ConfirmOnClose>0</View.ConfirmOnClose>
      > <View.Metric.Altitude>0</View.Metric.Altitude>
      > <View.Metric.Distance>0</View.Metric.Distance>
      > <View.Metric.Pressure>0</View.Metric.Pressure>
      > <View.Metric.Rainfall>0</View.Metric.Rainfall>
      > <View.Metric.Temperature>0</View.Metric.Temperature>
      > <View.Metric.Windspeed>0</View.Metric.Windspeed>
      > <View.VisibleLabelsMax>50</View.VisibleLabelsMax>
      > <View.Altitude>1</View.Altitude>
      > <View.Callsign>1</View.Callsign>
      > <View.Callsign.NotMe>0</View.Callsign.NotMe>
      > <View.Callsign.NotMine>0</View.Callsign.NotMine>
      > <View.Speed.Beaconed>1</View.Speed.Beaconed>
      > <View.Speed.Calculated>0</View.Speed.Calculated>
      > <View.Speed.Averaged>0</View.Speed.Averaged>
      > <View.Weather>1</View.Weather>
      > <View.ZoomReverse>1</View.ZoomReverse>
      > <View.ZoomMin>0</View.ZoomMin>
      > <View.ZoomMax>23</View.ZoomMax>
      > <View.WheelDelta>4</View.WheelDelta>
      > <View.ScrollInternals>1</View.ScrollInternals>
      > <Screen.DateSeconds>2367</Screen.DateSeconds>
      > <Screen.DateTime>1</Screen.DateTime>
      > <Screen.Altitude>1</Screen.Altitude>
      > <Screen.GridSquare>1</Screen.GridSquare>
      > <Screen.LatLon>1</Screen.LatLon>
      > <Screen.Satellites>1</Screen.Satellites>
      > <Screen.Tracks>1</Screen.Tracks>
      > <Screen.Circle>1</Screen.Circle>
      > <Screen.RedDot>1</Screen.RedDot>
      > <Screen.CrossHairs>1</Screen.CrossHairs>
      > <Screen.CrossHairTime>1000</Screen.CrossHairTime>
      > <View.Custom.Primary></View.Custom.Primary>
      > <View.Custom.Alternate></View.Custom.Alternate>
      > <View.Flight.Primary>'O^</View.Flight.Primary>
      > <View.Flight.Alternate>^</View.Flight.Alternate>
      > <View.Mobile.Primary>!'<=>()*0CFOPRSUXY[\^abefgjkpsuv</View.Mobile.Primary>
      > <View.Mobile.Alternate>>KOS^ksuv</View.Mobile.Alternate>
      > <View.Weather.Primary>_W</View.Weather.Primary>
      > <View.Weather.Alternate>([*:<@BDEFGHIJTUW_efgptwy{</View.Weather.Alternate>
      > <Center.Latitude>52.147551</Center.Latitude>
      > <Center.Longitude>-1.447993</Center.Longitude>
      > <Preferred.Latitude>0.000000</Preferred.Latitude>
      > <Preferred.Longitude>0.000000</Preferred.Longitude>
      > <Preferred.Zoom>0</Preferred.Zoom>
      > <Preferred.Scale>8.0000</Preferred.Scale>
      > <Preferred.Orientation>0</Preferred.Orientation>
      > <Tracking.Call>G6MMD-7</Tracking.Call>
      > <Tracking.Center>0</Tracking.Center>
      > <Tracking.Locked>0</Tracking.Locked>
      > <APRSISPort>@...:14578</APRSISPort>
      > <GPSPort></GPSPort>
      >
      >
      > <!--RFPort[0]-->
      > <RFPort Name="agw">
      > <Protocol>AGW</Protocol>
      > <Device>@LOCALHOST:8000</Device>
      > <RfBaud>1200</RfBaud>
      > <!--OpenCmd-->
      > <!--CloseCmd-->
      > <QuietTime>0</QuietTime>
      > <Enabled>0</Enabled>
      > <XmitEnabled>1</XmitEnabled>
      > <RFtoISEnabled>1</RFtoISEnabled>
      > <IStoRFEnabled>1</IStoRFEnabled>
      > <MyCallNot3rd>0</MyCallNot3rd>
      > <BeaconingEnabled>1</BeaconingEnabled>
      > <BeaconPath></BeaconPath>
      > <TelemetryEnabled>0</TelemetryEnabled>
      > <TelemetryPath></TelemetryPath>
      > <!--DigiXform-->
      > </RFPort>
      > <!--RFPort[0]-->
      >
      > <!--RFPort[1]-->
      > <RFPort Name="d710tes">
      > <Protocol>KWD710(Pkt)</Protocol>
      > <Device>COM3:19200,N,8,1</Device>
      > <RfBaud>1200</RfBaud>
      > <OpenCmd>^C^C^C~!!0</OpenCmd>
      > <OpenCmd>TC 1!?</OpenCmd>
      > <OpenCmd>TC 1!TS 1</OpenCmd>
      > <OpenCmd>TN 2,1!TN 2,1</OpenCmd>
      > <OpenCmd>^M!cmd:!5</OpenCmd>
      > <OpenCmd>DIG ON</OpenCmd>
      > <OpenCmd>GB 4800</OpenCmd>
      > <OpenCmd>HB 1200</OpenCmd>
      > <OpenCmd>GPST $GPRMC</OpenCmd>
      > <OpenCmd>LTM 10</OpenCmd>
      > <OpenCmd>LTMH OFF</OpenCmd>
      > <OpenCmd>LOC E 0</OpenCmd>
      > <OpenCmd>M ON</OpenCmd>
      > <OpenCmd>MCOM ON</OpenCmd>
      > <OpenCmd>MS OFF</OpenCmd>
      > <OpenCmd>CONO OFF</OpenCmd>
      > <OpenCmd>P 250</OpenCmd>
      > <OpenCmd>UI OFF</OpenCmd>
      > <OpenCmd>UIF NOID</OpenCmd>
      > <OpenCmd>UIT %</OpenCmd>
      > <OpenCmd>X OFF</OpenCmd>
      > <OpenCmd>HEADER OFF</OpenCmd>
      > <OpenCmd>NE ON</OpenCmd>
      > <OpenCmd>NO OFF</OpenCmd>
      > <OpenCmd>ECHO OFF!cmd:!1.0</OpenCmd>
      > <OpenCmd>BEACON EVERY 0!cmd:!1.0</OpenCmd>
      > <OpenCmd>ECHO OFF!cmd:!1.00</OpenCmd>
      > <OpenCmd>BEACON EVERY 0!cmd:!1.00</OpenCmd>
      > <OpenCmd>^C^C^C~!!0</OpenCmd>
      > <CloseCmd>^M!cmd:!1</CloseCmd>
      > <CloseCmd>LTM 0</CloseCmd>
      > <CloseCmd>TC 1!TS 1</CloseCmd>
      > <CloseCmd>TN 0,0!TN 0,0</CloseCmd>
      > <QuietTime>0</QuietTime>
      > <Enabled>1</Enabled>
      > <XmitEnabled>1</XmitEnabled>
      > <RFtoISEnabled>1</RFtoISEnabled>
      > <IStoRFEnabled>1</IStoRFEnabled>
      > <MyCallNot3rd>0</MyCallNot3rd>
      > <BeaconingEnabled>1</BeaconingEnabled>
      > <BeaconPath></BeaconPath>
      > <TelemetryEnabled>0</TelemetryEnabled>
      > <TelemetryPath></TelemetryPath>
      > <!--DigiXform-->
      > </RFPort>
      > <!--RFPort[1]-->
      >
      > <DigiXform>WIDE1-1=WIDE1*</DigiXform>
      > <DigiXform>WIDE2-1=WIDE2*</DigiXform>
      > <DigiXform>WIDE2-2=WIDE2-1</DigiXform>
      >
      >
      >
      > On 02/11/2010 12:21, Lynn W Deffenbaugh (Mr) wrote:
      >
      >> Dan Rimell wrote:
      >>
      >>> Just a few queries with issues I am having. I managed to solve the
      >>>
      >> issue
      >>
      >>> with enabling Band B as the correct TNC Band with trail and error.
      >>>
      >>>
      >> Can you post your final <RfPort> section, particularly the <OpenCmd>s
      >> and <CloseCmd>s? Or confirm that the latest one is the one listed
      >> below? When I get to it, I'm hoping to add pages to the Wiki for the
      >> various setups.
      >>
      >>
      >>> I did see the topic yesterday regarding mapping, which reminded me of
      >>> something I have always had trouble with. Whenever I select the "pre
      >>> fetch" option it will cause the software to "pause". By this I mean it
      >>> states queued 2804\2975 tiles, and doesnt move forward. There seems to
      >>> be no internet activity apart from the APRSIS feed. Wonder if im doing
      >>> something wrong.
      >>>
      >>>
      >> There's a pregnant pause before it throws up the information box that
      >> you mention while it tries to figure out how many tiles it needs versus
      >> how many tiles are already in the cache. When you clear the
      >> confirmation, all of the needed tiles are queued for fetching. There
      >> should be a (really tiny at first) yellow circle that will expand out to
      >> the range circle as the queue is worked off. This is the tile fetcher
      >> progress indicator. You can also double-click any empty map section and
      >> see the current state of the tile fetcher queue and threads.
      >>
      >> If you're using pre-fetch, you'll want to remember to disable the purger
      >> (http://aprsisce.wikidot.com/moving-osmtiles) or your tiles will
      >> disappear after a while.
      >>
      >>
      >>> DigiXForm - I have got three lines in here which I have added many
      >>> months ago, However I am sure they are wrong, as I am not actually
      >>> passing any digi traffic. I wonder if anyone can spot a mistake in this
      >>> con-fig below. I wonder if any of the Stations based in the UK have
      >>> suggestions for best practice, I find reading material for UK APRS
      >>> operations rare and hard to find.
      >>>
      >>>
      >> http://aprsisce.wikidot.com/digipeating is the Wiki page on digipeating
      >> and <DigiXForm>. These elements only work OUTSIDE of any RfPort at this
      >> time. In some future revision, they'll be port-specific (hence the
      >> placeholder), but for now, it's the global set that count. So, if you
      >> move your set of three outside of the RfPort and replace the commented
      >> one that's outside of that/those element(s), you should start digipeating.
      >>
      >> As far as I know, the UK and EU has adopted the "new paradigm" WIDEn-N,
      >> so your lines look right if you've got a good RF placement and want to
      >> run a WIDE2 digi. If you don't have large coverage, and only want to
      >> run a WIDE1 fill-in (which is what I run off 20' of my tower), just keep
      >> the first line (but I suspect you already understood that part).
      >>
      >> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
      >>
      >>
      >>> Thanks
      >>> Dan
      >>> M0MST
      >>>
      >>> _______
      >>>
      >>> <!--RFPort[1]-->
      >>> <RFPort Name="d710tes">
      >>> <Protocol>KWD710(Pkt)</Protocol>
      >>> <Device>COM3:19200,N,8,1</Device>
      >>> <RfBaud>1200</RfBaud>
      >>> <OpenCmd>^C^C^C~!!0</OpenCmd>
      >>> <OpenCmd>TC 1!?</OpenCmd>
      >>> <OpenCmd>TC 1!TS 1</OpenCmd>
      >>> <OpenCmd>TN 2,1!TN 2,1</OpenCmd>
      >>> <OpenCmd>^M!cmd:!5</OpenCmd>
      >>> <OpenCmd>DIG OFF</OpenCmd>
      >>> <OpenCmd>GB 4800</OpenCmd>
      >>> <OpenCmd>HB 1200</OpenCmd>
      >>> <OpenCmd>GPST $GPRMC</OpenCmd>
      >>> <OpenCmd>LTM 10</OpenCmd>
      >>> <OpenCmd>LTMH OFF</OpenCmd>
      >>> <OpenCmd>LOC E 0</OpenCmd>
      >>> <OpenCmd>M ON</OpenCmd>
      >>> <OpenCmd>MCOM ON</OpenCmd>
      >>> <OpenCmd>MS OFF</OpenCmd>
      >>> <OpenCmd>CONO OFF</OpenCmd>
      >>> <OpenCmd>P 250</OpenCmd>
      >>> <OpenCmd>UI OFF</OpenCmd>
      >>> <OpenCmd>UIF NOID</OpenCmd>
      >>> <OpenCmd>UIT %</OpenCmd>
      >>> <OpenCmd>X OFF</OpenCmd>
      >>> <OpenCmd>HEADER OFF</OpenCmd>
      >>> <OpenCmd>NE ON</OpenCmd>
      >>> <OpenCmd>NO OFF</OpenCmd>
      >>> <OpenCmd>ECHO OFF!cmd:!1.0</OpenCmd>
      >>> <OpenCmd>BEACON EVERY 0!cmd:!1.0</OpenCmd>
      >>> <OpenCmd>ECHO OFF!cmd:!1.00</OpenCmd>
      >>> <OpenCmd>BEACON EVERY 0!cmd:!1.00</OpenCmd>
      >>> <OpenCmd>^C^C^C~!!0</OpenCmd>
      >>> <CloseCmd>^M!cmd:!1</CloseCmd>
      >>> <CloseCmd>LTM 0</CloseCmd>
      >>> <CloseCmd>TC 1!TS 1</CloseCmd>
      >>> <CloseCmd>TN 0,0!TN 0,0</CloseCmd>
      >>> <QuietTime>0</QuietTime>
      >>> <Enabled>1</Enabled>
      >>> <XmitEnabled>1</XmitEnabled>
      >>> <RFtoISEnabled>1</RFtoISEnabled>
      >>> <IStoRFEnabled>1</IStoRFEnabled>
      >>> <MyCallNot3rd>0</MyCallNot3rd>
      >>> <BeaconingEnabled>1</BeaconingEnabled>
      >>> <BeaconPath></BeaconPath>
      >>> <TelemetryEnabled>0</TelemetryEnabled>
      >>> <TelemetryPath></TelemetryPath>
      >>> <!--DigiXform-->
      >>> <DigiXform>WIDE1-1=WIDE1*</DigiXform>
      >>> <DigiXform>WIDE2-1=WIDE2*</DigiXform>
      >>> <DigiXform>WIDE2-2=WIDE2-1</DigiXform>
      >>> </RFPort>
      >>> <!--RFPort[1]-->
      >>>
      >>>
      >>
      >
      >
      > ------------------------------------
      >
      > Yahoo! Groups Links
      >
      >
      >
      >
      >
    • Dan Rimell
      Thats excellent, Ill email you the config off group. Looking at the digi log it is working. Thanks Dan
      Message 2 of 6 , Nov 2, 2010
      • 0 Attachment
        Thats excellent, Ill email you the config off group. Looking at the digi
        log it is working.

        Thanks
        Dan

        On 02/11/2010 13:06, Lynn W Deffenbaugh (Mr) wrote:
        > As a final note, you can Enables / View Logs / Digi and then click
        > Enable in that window's menu. Any Digipeater action (or inaction) will
        > show up there.
        >
        > Thanks for the updated config. Now, if I can manage to not misplace it
        > until I get it in the wiki...
        >
        > Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
        >
        > Dan Rimell wrote:
        >> Thanks for Clearing That Up
        >>
        >> That below was my latest port config, Following your information below I
        >> have now changed it , Another copy. All understood regarding the
        >> prefetch, will try and watch the yellow circle :).
        >>
        >> Below is the latest config, yet to see any digi's as there are no
        >> mobiles in range of me at the moment
        >>
        >> Thanks
        >> Dan
        >> M0MST
        >>
        >> <Enables.APRSIS>1</Enables.APRSIS>
        >> <Enables.RFPorts>1</Enables.RFPorts>
        >> <Enables.RFPktLog>1</Enables.RFPktLog>
        >> <Enables.RFReceiveOnly>0</Enables.RFReceiveOnly>
        >> <Enables.GPS>0</Enables.GPS>
        >> <Enables.OSMFetch>1</Enables.OSMFetch>
        >> <Enables.Sound>0</Enables.Sound>
        >> <Enables.NotifyOnNewBulletin>0</Enables.NotifyOnNewBulletin>
        >> <Enables.CSVFile>1</Enables.CSVFile>
        >> <Enables.AutoSaveGPX>1</Enables.AutoSaveGPX>
        >> <Enables.Beacons>1</Enables.Beacons>
        >> <Enables.Telemetry>0</Enables.Telemetry>
        >> <Enables.AllMessages>0</Enables.AllMessages>
        >> <Enables.MyMessages>1</Enables.MyMessages>
        >> <Enables.HideQueries>0</Enables.HideQueries>
        >> <Enables.NotifyOnQuery>1</Enables.NotifyOnQuery>
        >> <Enables.NotifyOnNewMessage>1</Enables.NotifyOnNewMessage>
        >> <Enables.Debug>0</Enables.Debug>
        >> <Genius.MinTime>10</Genius.MinTime>
        >> <Genius.MaxTime>30</Genius.MaxTime>
        >> <Genius.TimeOnly>0</Genius.TimeOnly>
        >> <Genius.StartStop>1</Genius.StartStop>
        >> <Genius.BearingChange>30</Genius.BearingChange>
        >> <Genius.ForecastError>0.10</Genius.ForecastError>
        >> <Genius.MaxDistance>1.00</Genius.MaxDistance>
        >> <Symbol.Table>/</Symbol.Table>
        >> <Symbol.Symbol>#</Symbol.Symbol>
        >> <Beacon.Timestamp>1</Beacon.Timestamp>
        >> <Beacon.HHMMSS>1</Beacon.HHMMSS>
        >> <Beacon.CourseSpeed>1</Beacon.CourseSpeed>
        >> <Beacon.Altitude>1</Beacon.Altitude>
        >> <Beacon.Why>1</Beacon.Why>
        >> <Beacon.Comment>1</Beacon.Comment>
        >> <Beacon.DAO>0</Beacon.DAO>
        >> <Status.Enabled>1</Status.Enabled>
        >> <Status.Interval>10</Status.Interval>
        >> <Status.Timestamp>1</Status.Timestamp>
        >> <Status.GridSquare>1</Status.GridSquare>
        >> <Status.Text>APRSISCE/32 DIGI</Status.Text>
        >> <Status.Choice>APRSISCE/32 DIGI</Status.Choice>
        >> <Status.LastSent>2010-11-02T12:49:45</Status.LastSent>
        >> <Scale>14.5686</Scale>
        >> <Orientation>2</Orientation>
        >> <Latitude>52.131434</Latitude>
        >> <Longitude>-1.789009</Longitude>
        >> <Altitude>0.0000</Altitude>
        >> <BeaconPath>RAYNET-1,WIDE1-1,WIDE2-2</BeaconPath>
        >> <EMailServer>EMAIL-2</EMailServer>
        >> <WhoIsServer>WHO-IS</WhoIsServer>
        >> <!--MessageGroup-->
        >> <OSM.Zoom>10</OSM.Zoom>
        >> <OSM.Percent>50</OSM.Percent>
        >> <OSM.Server>tile.openstreetmap.org</OSM.Server>
        >> <OSM.Port>80</OSM.Port>
        >> <OSM.URLPrefix>/</OSM.URLPrefix>
        >> <OSM.Path>C:/Documents and
        >> Settings/Dan/Desktop/APRS/APRSIS-CE/OSMTiles/</OSM.Path>
        >> <OSM.MinMBFree>8</OSM.MinMBFree>
        >> <OSM.RetainDays>7</OSM.RetainDays>
        >> <OSM.RetainZoom>5</OSM.RetainZoom>
        >> <OSM.RevisionHours>0</OSM.RevisionHours>
        >> <MultiTrack.width>0</MultiTrack.width>
        >> <MultiTrack.height>0</MultiTrack.height>
        >> <MultiTrack.Orientation>2</MultiTrack.Orientation>
        >> <MultiTrack.Percent>50</MultiTrack.Percent>
        >> <MultiTrack.Zoom>11</MultiTrack.Zoom>
        >> <MultiTrack.Scale>8.0000</MultiTrack.Scale>
        >> <WindowPlacement.x>88</WindowPlacement.x>
        >> <WindowPlacement.y>116</WindowPlacement.y>
        >> <WindowPlacement.width>960</WindowPlacement.width>
        >> <WindowPlacement.height>554</WindowPlacement.height>
        >> <View.ConfirmOnClose>0</View.ConfirmOnClose>
        >> <View.Metric.Altitude>0</View.Metric.Altitude>
        >> <View.Metric.Distance>0</View.Metric.Distance>
        >> <View.Metric.Pressure>0</View.Metric.Pressure>
        >> <View.Metric.Rainfall>0</View.Metric.Rainfall>
        >> <View.Metric.Temperature>0</View.Metric.Temperature>
        >> <View.Metric.Windspeed>0</View.Metric.Windspeed>
        >> <View.VisibleLabelsMax>50</View.VisibleLabelsMax>
        >> <View.Altitude>1</View.Altitude>
        >> <View.Callsign>1</View.Callsign>
        >> <View.Callsign.NotMe>0</View.Callsign.NotMe>
        >> <View.Callsign.NotMine>0</View.Callsign.NotMine>
        >> <View.Speed.Beaconed>1</View.Speed.Beaconed>
        >> <View.Speed.Calculated>0</View.Speed.Calculated>
        >> <View.Speed.Averaged>0</View.Speed.Averaged>
        >> <View.Weather>1</View.Weather>
        >> <View.ZoomReverse>1</View.ZoomReverse>
        >> <View.ZoomMin>0</View.ZoomMin>
        >> <View.ZoomMax>23</View.ZoomMax>
        >> <View.WheelDelta>4</View.WheelDelta>
        >> <View.ScrollInternals>1</View.ScrollInternals>
        >> <Screen.DateSeconds>2367</Screen.DateSeconds>
        >> <Screen.DateTime>1</Screen.DateTime>
        >> <Screen.Altitude>1</Screen.Altitude>
        >> <Screen.GridSquare>1</Screen.GridSquare>
        >> <Screen.LatLon>1</Screen.LatLon>
        >> <Screen.Satellites>1</Screen.Satellites>
        >> <Screen.Tracks>1</Screen.Tracks>
        >> <Screen.Circle>1</Screen.Circle>
        >> <Screen.RedDot>1</Screen.RedDot>
        >> <Screen.CrossHairs>1</Screen.CrossHairs>
        >> <Screen.CrossHairTime>1000</Screen.CrossHairTime>
        >> <View.Custom.Primary></View.Custom.Primary>
        >> <View.Custom.Alternate></View.Custom.Alternate>
        >> <View.Flight.Primary>'O^</View.Flight.Primary>
        >> <View.Flight.Alternate>^</View.Flight.Alternate>
        >> <View.Mobile.Primary>!'<=>()*0CFOPRSUXY[\^abefgjkpsuv</View.Mobile.Primary>
        >> <View.Mobile.Alternate>>KOS^ksuv</View.Mobile.Alternate>
        >> <View.Weather.Primary>_W</View.Weather.Primary>
        >> <View.Weather.Alternate>([*:<@BDEFGHIJTUW_efgptwy{</View.Weather.Alternate>
        >> <Center.Latitude>52.147551</Center.Latitude>
        >> <Center.Longitude>-1.447993</Center.Longitude>
        >> <Preferred.Latitude>0.000000</Preferred.Latitude>
        >> <Preferred.Longitude>0.000000</Preferred.Longitude>
        >> <Preferred.Zoom>0</Preferred.Zoom>
        >> <Preferred.Scale>8.0000</Preferred.Scale>
        >> <Preferred.Orientation>0</Preferred.Orientation>
        >> <Tracking.Call>G6MMD-7</Tracking.Call>
        >> <Tracking.Center>0</Tracking.Center>
        >> <Tracking.Locked>0</Tracking.Locked>
        >> <APRSISPort>@...:14578</APRSISPort>
        >> <GPSPort></GPSPort>
        >>
        >>
        >> <!--RFPort[0]-->
        >> <RFPort Name="agw">
        >> <Protocol>AGW</Protocol>
        >> <Device>@LOCALHOST:8000</Device>
        >> <RfBaud>1200</RfBaud>
        >> <!--OpenCmd-->
        >> <!--CloseCmd-->
        >> <QuietTime>0</QuietTime>
        >> <Enabled>0</Enabled>
        >> <XmitEnabled>1</XmitEnabled>
        >> <RFtoISEnabled>1</RFtoISEnabled>
        >> <IStoRFEnabled>1</IStoRFEnabled>
        >> <MyCallNot3rd>0</MyCallNot3rd>
        >> <BeaconingEnabled>1</BeaconingEnabled>
        >> <BeaconPath></BeaconPath>
        >> <TelemetryEnabled>0</TelemetryEnabled>
        >> <TelemetryPath></TelemetryPath>
        >> <!--DigiXform-->
        >> </RFPort>
        >> <!--RFPort[0]-->
        >>
        >> <!--RFPort[1]-->
        >> <RFPort Name="d710tes">
        >> <Protocol>KWD710(Pkt)</Protocol>
        >> <Device>COM3:19200,N,8,1</Device>
        >> <RfBaud>1200</RfBaud>
        >> <OpenCmd>^C^C^C~!!0</OpenCmd>
        >> <OpenCmd>TC 1!?</OpenCmd>
        >> <OpenCmd>TC 1!TS 1</OpenCmd>
        >> <OpenCmd>TN 2,1!TN 2,1</OpenCmd>
        >> <OpenCmd>^M!cmd:!5</OpenCmd>
        >> <OpenCmd>DIG ON</OpenCmd>
        >> <OpenCmd>GB 4800</OpenCmd>
        >> <OpenCmd>HB 1200</OpenCmd>
        >> <OpenCmd>GPST $GPRMC</OpenCmd>
        >> <OpenCmd>LTM 10</OpenCmd>
        >> <OpenCmd>LTMH OFF</OpenCmd>
        >> <OpenCmd>LOC E 0</OpenCmd>
        >> <OpenCmd>M ON</OpenCmd>
        >> <OpenCmd>MCOM ON</OpenCmd>
        >> <OpenCmd>MS OFF</OpenCmd>
        >> <OpenCmd>CONO OFF</OpenCmd>
        >> <OpenCmd>P 250</OpenCmd>
        >> <OpenCmd>UI OFF</OpenCmd>
        >> <OpenCmd>UIF NOID</OpenCmd>
        >> <OpenCmd>UIT %</OpenCmd>
        >> <OpenCmd>X OFF</OpenCmd>
        >> <OpenCmd>HEADER OFF</OpenCmd>
        >> <OpenCmd>NE ON</OpenCmd>
        >> <OpenCmd>NO OFF</OpenCmd>
        >> <OpenCmd>ECHO OFF!cmd:!1.0</OpenCmd>
        >> <OpenCmd>BEACON EVERY 0!cmd:!1.0</OpenCmd>
        >> <OpenCmd>ECHO OFF!cmd:!1.00</OpenCmd>
        >> <OpenCmd>BEACON EVERY 0!cmd:!1.00</OpenCmd>
        >> <OpenCmd>^C^C^C~!!0</OpenCmd>
        >> <CloseCmd>^M!cmd:!1</CloseCmd>
        >> <CloseCmd>LTM 0</CloseCmd>
        >> <CloseCmd>TC 1!TS 1</CloseCmd>
        >> <CloseCmd>TN 0,0!TN 0,0</CloseCmd>
        >> <QuietTime>0</QuietTime>
        >> <Enabled>1</Enabled>
        >> <XmitEnabled>1</XmitEnabled>
        >> <RFtoISEnabled>1</RFtoISEnabled>
        >> <IStoRFEnabled>1</IStoRFEnabled>
        >> <MyCallNot3rd>0</MyCallNot3rd>
        >> <BeaconingEnabled>1</BeaconingEnabled>
        >> <BeaconPath></BeaconPath>
        >> <TelemetryEnabled>0</TelemetryEnabled>
        >> <TelemetryPath></TelemetryPath>
        >> <!--DigiXform-->
        >> </RFPort>
        >> <!--RFPort[1]-->
        >>
        >> <DigiXform>WIDE1-1=WIDE1*</DigiXform>
        >> <DigiXform>WIDE2-1=WIDE2*</DigiXform>
        >> <DigiXform>WIDE2-2=WIDE2-1</DigiXform>
        >>
        >>
        >>
        >> On 02/11/2010 12:21, Lynn W Deffenbaugh (Mr) wrote:
        >>
        >>> Dan Rimell wrote:
        >>>
        >>>> Just a few queries with issues I am having. I managed to solve the
        >>>>
        >>> issue
        >>>
        >>>> with enabling Band B as the correct TNC Band with trail and error.
        >>>>
        >>>>
        >>> Can you post your final<RfPort> section, particularly the<OpenCmd>s
        >>> and<CloseCmd>s? Or confirm that the latest one is the one listed
        >>> below? When I get to it, I'm hoping to add pages to the Wiki for the
        >>> various setups.
        >>>
        >>>
        >>>> I did see the topic yesterday regarding mapping, which reminded me of
        >>>> something I have always had trouble with. Whenever I select the "pre
        >>>> fetch" option it will cause the software to "pause". By this I mean it
        >>>> states queued 2804\2975 tiles, and doesnt move forward. There seems to
        >>>> be no internet activity apart from the APRSIS feed. Wonder if im doing
        >>>> something wrong.
        >>>>
        >>>>
        >>> There's a pregnant pause before it throws up the information box that
        >>> you mention while it tries to figure out how many tiles it needs versus
        >>> how many tiles are already in the cache. When you clear the
        >>> confirmation, all of the needed tiles are queued for fetching. There
        >>> should be a (really tiny at first) yellow circle that will expand out to
        >>> the range circle as the queue is worked off. This is the tile fetcher
        >>> progress indicator. You can also double-click any empty map section and
        >>> see the current state of the tile fetcher queue and threads.
        >>>
        >>> If you're using pre-fetch, you'll want to remember to disable the purger
        >>> (http://aprsisce.wikidot.com/moving-osmtiles) or your tiles will
        >>> disappear after a while.
        >>>
        >>>
        >>>> DigiXForm - I have got three lines in here which I have added many
        >>>> months ago, However I am sure they are wrong, as I am not actually
        >>>> passing any digi traffic. I wonder if anyone can spot a mistake in this
        >>>> con-fig below. I wonder if any of the Stations based in the UK have
        >>>> suggestions for best practice, I find reading material for UK APRS
        >>>> operations rare and hard to find.
        >>>>
        >>>>
        >>> http://aprsisce.wikidot.com/digipeating is the Wiki page on digipeating
        >>> and<DigiXForm>. These elements only work OUTSIDE of any RfPort at this
        >>> time. In some future revision, they'll be port-specific (hence the
        >>> placeholder), but for now, it's the global set that count. So, if you
        >>> move your set of three outside of the RfPort and replace the commented
        >>> one that's outside of that/those element(s), you should start digipeating.
        >>>
        >>> As far as I know, the UK and EU has adopted the "new paradigm" WIDEn-N,
        >>> so your lines look right if you've got a good RF placement and want to
        >>> run a WIDE2 digi. If you don't have large coverage, and only want to
        >>> run a WIDE1 fill-in (which is what I run off 20' of my tower), just keep
        >>> the first line (but I suspect you already understood that part).
        >>>
        >>> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
        >>>
        >>>
        >>>> Thanks
        >>>> Dan
        >>>> M0MST
        >>>>
        >>>> _______
        >>>>
        >>>> <!--RFPort[1]-->
        >>>> <RFPort Name="d710tes">
        >>>> <Protocol>KWD710(Pkt)</Protocol>
        >>>> <Device>COM3:19200,N,8,1</Device>
        >>>> <RfBaud>1200</RfBaud>
        >>>> <OpenCmd>^C^C^C~!!0</OpenCmd>
        >>>> <OpenCmd>TC 1!?</OpenCmd>
        >>>> <OpenCmd>TC 1!TS 1</OpenCmd>
        >>>> <OpenCmd>TN 2,1!TN 2,1</OpenCmd>
        >>>> <OpenCmd>^M!cmd:!5</OpenCmd>
        >>>> <OpenCmd>DIG OFF</OpenCmd>
        >>>> <OpenCmd>GB 4800</OpenCmd>
        >>>> <OpenCmd>HB 1200</OpenCmd>
        >>>> <OpenCmd>GPST $GPRMC</OpenCmd>
        >>>> <OpenCmd>LTM 10</OpenCmd>
        >>>> <OpenCmd>LTMH OFF</OpenCmd>
        >>>> <OpenCmd>LOC E 0</OpenCmd>
        >>>> <OpenCmd>M ON</OpenCmd>
        >>>> <OpenCmd>MCOM ON</OpenCmd>
        >>>> <OpenCmd>MS OFF</OpenCmd>
        >>>> <OpenCmd>CONO OFF</OpenCmd>
        >>>> <OpenCmd>P 250</OpenCmd>
        >>>> <OpenCmd>UI OFF</OpenCmd>
        >>>> <OpenCmd>UIF NOID</OpenCmd>
        >>>> <OpenCmd>UIT %</OpenCmd>
        >>>> <OpenCmd>X OFF</OpenCmd>
        >>>> <OpenCmd>HEADER OFF</OpenCmd>
        >>>> <OpenCmd>NE ON</OpenCmd>
        >>>> <OpenCmd>NO OFF</OpenCmd>
        >>>> <OpenCmd>ECHO OFF!cmd:!1.0</OpenCmd>
        >>>> <OpenCmd>BEACON EVERY 0!cmd:!1.0</OpenCmd>
        >>>> <OpenCmd>ECHO OFF!cmd:!1.00</OpenCmd>
        >>>> <OpenCmd>BEACON EVERY 0!cmd:!1.00</OpenCmd>
        >>>> <OpenCmd>^C^C^C~!!0</OpenCmd>
        >>>> <CloseCmd>^M!cmd:!1</CloseCmd>
        >>>> <CloseCmd>LTM 0</CloseCmd>
        >>>> <CloseCmd>TC 1!TS 1</CloseCmd>
        >>>> <CloseCmd>TN 0,0!TN 0,0</CloseCmd>
        >>>> <QuietTime>0</QuietTime>
        >>>> <Enabled>1</Enabled>
        >>>> <XmitEnabled>1</XmitEnabled>
        >>>> <RFtoISEnabled>1</RFtoISEnabled>
        >>>> <IStoRFEnabled>1</IStoRFEnabled>
        >>>> <MyCallNot3rd>0</MyCallNot3rd>
        >>>> <BeaconingEnabled>1</BeaconingEnabled>
        >>>> <BeaconPath></BeaconPath>
        >>>> <TelemetryEnabled>0</TelemetryEnabled>
        >>>> <TelemetryPath></TelemetryPath>
        >>>> <!--DigiXform-->
        >>>> <DigiXform>WIDE1-1=WIDE1*</DigiXform>
        >>>> <DigiXform>WIDE2-1=WIDE2*</DigiXform>
        >>>> <DigiXform>WIDE2-2=WIDE2-1</DigiXform>
        >>>> </RFPort>
        >>>> <!--RFPort[1]-->
        >>>>
        >>>>
        >>>
        >>
        >> ------------------------------------
        >>
        >> Yahoo! Groups Links
        >>
        >>
        >>
        >>
        >>
        >
        >
        > ------------------------------------
        >
        > Yahoo! Groups Links
        >
        >
        >
      • Lynn W Deffenbaugh (Mr)
        For Igates and Digis, I also keep a copy of the Transmit log open and enabled as well as Enables / Rf Ports / Log All. This gives me a record (in the
        Message 3 of 6 , Nov 2, 2010
        • 0 Attachment
          For Igates and Digis, I also keep a copy of the Transmit log open and
          enabled as well as Enables / Rf Ports / Log All. This gives me a record
          (in the APRSIS32*.LOG and *.PKT files) of what I've been doing on RF.

          Thanks for the config file. I received it already.

          Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

          Dan Rimell wrote:
          > Thats excellent, Ill email you the config off group. Looking at the digi
          > log it is working.
          >
          > Thanks
          > Dan
          >
          > On 02/11/2010 13:06, Lynn W Deffenbaugh (Mr) wrote:
          >
          >> As a final note, you can Enables / View Logs / Digi and then click
          >> Enable in that window's menu. Any Digipeater action (or inaction) will
          >> show up there.
          >>
          >> Thanks for the updated config. Now, if I can manage to not misplace it
          >> until I get it in the wiki...
          >>
          >> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
          >>
          >> Dan Rimell wrote:
          >>
          >>> Thanks for Clearing That Up
          >>>
          >>> That below was my latest port config, Following your information below I
          >>> have now changed it , Another copy. All understood regarding the
          >>> prefetch, will try and watch the yellow circle :).
          >>>
          >>> Below is the latest config, yet to see any digi's as there are no
          >>> mobiles in range of me at the moment
          >>>
          >>> Thanks
          >>> Dan
          >>> M0MST
          >>>
          >>> <Enables.APRSIS>1</Enables.APRSIS>
          >>> <Enables.RFPorts>1</Enables.RFPorts>
          >>> <Enables.RFPktLog>1</Enables.RFPktLog>
          >>> <Enables.RFReceiveOnly>0</Enables.RFReceiveOnly>
          >>> <Enables.GPS>0</Enables.GPS>
          >>> <Enables.OSMFetch>1</Enables.OSMFetch>
          >>> <Enables.Sound>0</Enables.Sound>
          >>> <Enables.NotifyOnNewBulletin>0</Enables.NotifyOnNewBulletin>
          >>> <Enables.CSVFile>1</Enables.CSVFile>
          >>> <Enables.AutoSaveGPX>1</Enables.AutoSaveGPX>
          >>> <Enables.Beacons>1</Enables.Beacons>
          >>> <Enables.Telemetry>0</Enables.Telemetry>
          >>> <Enables.AllMessages>0</Enables.AllMessages>
          >>> <Enables.MyMessages>1</Enables.MyMessages>
          >>> <Enables.HideQueries>0</Enables.HideQueries>
          >>> <Enables.NotifyOnQuery>1</Enables.NotifyOnQuery>
          >>> <Enables.NotifyOnNewMessage>1</Enables.NotifyOnNewMessage>
          >>> <Enables.Debug>0</Enables.Debug>
          >>> <Genius.MinTime>10</Genius.MinTime>
          >>> <Genius.MaxTime>30</Genius.MaxTime>
          >>> <Genius.TimeOnly>0</Genius.TimeOnly>
          >>> <Genius.StartStop>1</Genius.StartStop>
          >>> <Genius.BearingChange>30</Genius.BearingChange>
          >>> <Genius.ForecastError>0.10</Genius.ForecastError>
          >>> <Genius.MaxDistance>1.00</Genius.MaxDistance>
          >>> <Symbol.Table>/</Symbol.Table>
          >>> <Symbol.Symbol>#</Symbol.Symbol>
          >>> <Beacon.Timestamp>1</Beacon.Timestamp>
          >>> <Beacon.HHMMSS>1</Beacon.HHMMSS>
          >>> <Beacon.CourseSpeed>1</Beacon.CourseSpeed>
          >>> <Beacon.Altitude>1</Beacon.Altitude>
          >>> <Beacon.Why>1</Beacon.Why>
          >>> <Beacon.Comment>1</Beacon.Comment>
          >>> <Beacon.DAO>0</Beacon.DAO>
          >>> <Status.Enabled>1</Status.Enabled>
          >>> <Status.Interval>10</Status.Interval>
          >>> <Status.Timestamp>1</Status.Timestamp>
          >>> <Status.GridSquare>1</Status.GridSquare>
          >>> <Status.Text>APRSISCE/32 DIGI</Status.Text>
          >>> <Status.Choice>APRSISCE/32 DIGI</Status.Choice>
          >>> <Status.LastSent>2010-11-02T12:49:45</Status.LastSent>
          >>> <Scale>14.5686</Scale>
          >>> <Orientation>2</Orientation>
          >>> <Latitude>52.131434</Latitude>
          >>> <Longitude>-1.789009</Longitude>
          >>> <Altitude>0.0000</Altitude>
          >>> <BeaconPath>RAYNET-1,WIDE1-1,WIDE2-2</BeaconPath>
          >>> <EMailServer>EMAIL-2</EMailServer>
          >>> <WhoIsServer>WHO-IS</WhoIsServer>
          >>> <!--MessageGroup-->
          >>> <OSM.Zoom>10</OSM.Zoom>
          >>> <OSM.Percent>50</OSM.Percent>
          >>> <OSM.Server>tile.openstreetmap.org</OSM.Server>
          >>> <OSM.Port>80</OSM.Port>
          >>> <OSM.URLPrefix>/</OSM.URLPrefix>
          >>> <OSM.Path>C:/Documents and
          >>> Settings/Dan/Desktop/APRS/APRSIS-CE/OSMTiles/</OSM.Path>
          >>> <OSM.MinMBFree>8</OSM.MinMBFree>
          >>> <OSM.RetainDays>7</OSM.RetainDays>
          >>> <OSM.RetainZoom>5</OSM.RetainZoom>
          >>> <OSM.RevisionHours>0</OSM.RevisionHours>
          >>> <MultiTrack.width>0</MultiTrack.width>
          >>> <MultiTrack.height>0</MultiTrack.height>
          >>> <MultiTrack.Orientation>2</MultiTrack.Orientation>
          >>> <MultiTrack.Percent>50</MultiTrack.Percent>
          >>> <MultiTrack.Zoom>11</MultiTrack.Zoom>
          >>> <MultiTrack.Scale>8.0000</MultiTrack.Scale>
          >>> <WindowPlacement.x>88</WindowPlacement.x>
          >>> <WindowPlacement.y>116</WindowPlacement.y>
          >>> <WindowPlacement.width>960</WindowPlacement.width>
          >>> <WindowPlacement.height>554</WindowPlacement.height>
          >>> <View.ConfirmOnClose>0</View.ConfirmOnClose>
          >>> <View.Metric.Altitude>0</View.Metric.Altitude>
          >>> <View.Metric.Distance>0</View.Metric.Distance>
          >>> <View.Metric.Pressure>0</View.Metric.Pressure>
          >>> <View.Metric.Rainfall>0</View.Metric.Rainfall>
          >>> <View.Metric.Temperature>0</View.Metric.Temperature>
          >>> <View.Metric.Windspeed>0</View.Metric.Windspeed>
          >>> <View.VisibleLabelsMax>50</View.VisibleLabelsMax>
          >>> <View.Altitude>1</View.Altitude>
          >>> <View.Callsign>1</View.Callsign>
          >>> <View.Callsign.NotMe>0</View.Callsign.NotMe>
          >>> <View.Callsign.NotMine>0</View.Callsign.NotMine>
          >>> <View.Speed.Beaconed>1</View.Speed.Beaconed>
          >>> <View.Speed.Calculated>0</View.Speed.Calculated>
          >>> <View.Speed.Averaged>0</View.Speed.Averaged>
          >>> <View.Weather>1</View.Weather>
          >>> <View.ZoomReverse>1</View.ZoomReverse>
          >>> <View.ZoomMin>0</View.ZoomMin>
          >>> <View.ZoomMax>23</View.ZoomMax>
          >>> <View.WheelDelta>4</View.WheelDelta>
          >>> <View.ScrollInternals>1</View.ScrollInternals>
          >>> <Screen.DateSeconds>2367</Screen.DateSeconds>
          >>> <Screen.DateTime>1</Screen.DateTime>
          >>> <Screen.Altitude>1</Screen.Altitude>
          >>> <Screen.GridSquare>1</Screen.GridSquare>
          >>> <Screen.LatLon>1</Screen.LatLon>
          >>> <Screen.Satellites>1</Screen.Satellites>
          >>> <Screen.Tracks>1</Screen.Tracks>
          >>> <Screen.Circle>1</Screen.Circle>
          >>> <Screen.RedDot>1</Screen.RedDot>
          >>> <Screen.CrossHairs>1</Screen.CrossHairs>
          >>> <Screen.CrossHairTime>1000</Screen.CrossHairTime>
          >>> <View.Custom.Primary></View.Custom.Primary>
          >>> <View.Custom.Alternate></View.Custom.Alternate>
          >>> <View.Flight.Primary>'O^</View.Flight.Primary>
          >>> <View.Flight.Alternate>^</View.Flight.Alternate>
          >>> <View.Mobile.Primary>!'<=>()*0CFOPRSUXY[\^abefgjkpsuv</View.Mobile.Primary>
          >>> <View.Mobile.Alternate>>KOS^ksuv</View.Mobile.Alternate>
          >>> <View.Weather.Primary>_W</View.Weather.Primary>
          >>> <View.Weather.Alternate>([*:<@BDEFGHIJTUW_efgptwy{</View.Weather.Alternate>
          >>> <Center.Latitude>52.147551</Center.Latitude>
          >>> <Center.Longitude>-1.447993</Center.Longitude>
          >>> <Preferred.Latitude>0.000000</Preferred.Latitude>
          >>> <Preferred.Longitude>0.000000</Preferred.Longitude>
          >>> <Preferred.Zoom>0</Preferred.Zoom>
          >>> <Preferred.Scale>8.0000</Preferred.Scale>
          >>> <Preferred.Orientation>0</Preferred.Orientation>
          >>> <Tracking.Call>G6MMD-7</Tracking.Call>
          >>> <Tracking.Center>0</Tracking.Center>
          >>> <Tracking.Locked>0</Tracking.Locked>
          >>> <APRSISPort>@...:14578</APRSISPort>
          >>> <GPSPort></GPSPort>
          >>>
          >>>
          >>> <!--RFPort[0]-->
          >>> <RFPort Name="agw">
          >>> <Protocol>AGW</Protocol>
          >>> <Device>@LOCALHOST:8000</Device>
          >>> <RfBaud>1200</RfBaud>
          >>> <!--OpenCmd-->
          >>> <!--CloseCmd-->
          >>> <QuietTime>0</QuietTime>
          >>> <Enabled>0</Enabled>
          >>> <XmitEnabled>1</XmitEnabled>
          >>> <RFtoISEnabled>1</RFtoISEnabled>
          >>> <IStoRFEnabled>1</IStoRFEnabled>
          >>> <MyCallNot3rd>0</MyCallNot3rd>
          >>> <BeaconingEnabled>1</BeaconingEnabled>
          >>> <BeaconPath></BeaconPath>
          >>> <TelemetryEnabled>0</TelemetryEnabled>
          >>> <TelemetryPath></TelemetryPath>
          >>> <!--DigiXform-->
          >>> </RFPort>
          >>> <!--RFPort[0]-->
          >>>
          >>> <!--RFPort[1]-->
          >>> <RFPort Name="d710tes">
          >>> <Protocol>KWD710(Pkt)</Protocol>
          >>> <Device>COM3:19200,N,8,1</Device>
          >>> <RfBaud>1200</RfBaud>
          >>> <OpenCmd>^C^C^C~!!0</OpenCmd>
          >>> <OpenCmd>TC 1!?</OpenCmd>
          >>> <OpenCmd>TC 1!TS 1</OpenCmd>
          >>> <OpenCmd>TN 2,1!TN 2,1</OpenCmd>
          >>> <OpenCmd>^M!cmd:!5</OpenCmd>
          >>> <OpenCmd>DIG ON</OpenCmd>
          >>> <OpenCmd>GB 4800</OpenCmd>
          >>> <OpenCmd>HB 1200</OpenCmd>
          >>> <OpenCmd>GPST $GPRMC</OpenCmd>
          >>> <OpenCmd>LTM 10</OpenCmd>
          >>> <OpenCmd>LTMH OFF</OpenCmd>
          >>> <OpenCmd>LOC E 0</OpenCmd>
          >>> <OpenCmd>M ON</OpenCmd>
          >>> <OpenCmd>MCOM ON</OpenCmd>
          >>> <OpenCmd>MS OFF</OpenCmd>
          >>> <OpenCmd>CONO OFF</OpenCmd>
          >>> <OpenCmd>P 250</OpenCmd>
          >>> <OpenCmd>UI OFF</OpenCmd>
          >>> <OpenCmd>UIF NOID</OpenCmd>
          >>> <OpenCmd>UIT %</OpenCmd>
          >>> <OpenCmd>X OFF</OpenCmd>
          >>> <OpenCmd>HEADER OFF</OpenCmd>
          >>> <OpenCmd>NE ON</OpenCmd>
          >>> <OpenCmd>NO OFF</OpenCmd>
          >>> <OpenCmd>ECHO OFF!cmd:!1.0</OpenCmd>
          >>> <OpenCmd>BEACON EVERY 0!cmd:!1.0</OpenCmd>
          >>> <OpenCmd>ECHO OFF!cmd:!1.00</OpenCmd>
          >>> <OpenCmd>BEACON EVERY 0!cmd:!1.00</OpenCmd>
          >>> <OpenCmd>^C^C^C~!!0</OpenCmd>
          >>> <CloseCmd>^M!cmd:!1</CloseCmd>
          >>> <CloseCmd>LTM 0</CloseCmd>
          >>> <CloseCmd>TC 1!TS 1</CloseCmd>
          >>> <CloseCmd>TN 0,0!TN 0,0</CloseCmd>
          >>> <QuietTime>0</QuietTime>
          >>> <Enabled>1</Enabled>
          >>> <XmitEnabled>1</XmitEnabled>
          >>> <RFtoISEnabled>1</RFtoISEnabled>
          >>> <IStoRFEnabled>1</IStoRFEnabled>
          >>> <MyCallNot3rd>0</MyCallNot3rd>
          >>> <BeaconingEnabled>1</BeaconingEnabled>
          >>> <BeaconPath></BeaconPath>
          >>> <TelemetryEnabled>0</TelemetryEnabled>
          >>> <TelemetryPath></TelemetryPath>
          >>> <!--DigiXform-->
          >>> </RFPort>
          >>> <!--RFPort[1]-->
          >>>
          >>> <DigiXform>WIDE1-1=WIDE1*</DigiXform>
          >>> <DigiXform>WIDE2-1=WIDE2*</DigiXform>
          >>> <DigiXform>WIDE2-2=WIDE2-1</DigiXform>
          >>>
          >>>
          >>>
          >>> On 02/11/2010 12:21, Lynn W Deffenbaugh (Mr) wrote:
          >>>
          >>>
          >>>> Dan Rimell wrote:
          >>>>
          >>>>
          >>>>> Just a few queries with issues I am having. I managed to solve the
          >>>>>
          >>>>>
          >>>> issue
          >>>>
          >>>>
          >>>>> with enabling Band B as the correct TNC Band with trail and error.
          >>>>>
          >>>>>
          >>>>>
          >>>> Can you post your final<RfPort> section, particularly the<OpenCmd>s
          >>>> and<CloseCmd>s? Or confirm that the latest one is the one listed
          >>>> below? When I get to it, I'm hoping to add pages to the Wiki for the
          >>>> various setups.
          >>>>
          >>>>
          >>>>
          >>>>> I did see the topic yesterday regarding mapping, which reminded me of
          >>>>> something I have always had trouble with. Whenever I select the "pre
          >>>>> fetch" option it will cause the software to "pause". By this I mean it
          >>>>> states queued 2804\2975 tiles, and doesnt move forward. There seems to
          >>>>> be no internet activity apart from the APRSIS feed. Wonder if im doing
          >>>>> something wrong.
          >>>>>
          >>>>>
          >>>>>
          >>>> There's a pregnant pause before it throws up the information box that
          >>>> you mention while it tries to figure out how many tiles it needs versus
          >>>> how many tiles are already in the cache. When you clear the
          >>>> confirmation, all of the needed tiles are queued for fetching. There
          >>>> should be a (really tiny at first) yellow circle that will expand out to
          >>>> the range circle as the queue is worked off. This is the tile fetcher
          >>>> progress indicator. You can also double-click any empty map section and
          >>>> see the current state of the tile fetcher queue and threads.
          >>>>
          >>>> If you're using pre-fetch, you'll want to remember to disable the purger
          >>>> (http://aprsisce.wikidot.com/moving-osmtiles) or your tiles will
          >>>> disappear after a while.
          >>>>
          >>>>
          >>>>
          >>>>> DigiXForm - I have got three lines in here which I have added many
          >>>>> months ago, However I am sure they are wrong, as I am not actually
          >>>>> passing any digi traffic. I wonder if anyone can spot a mistake in this
          >>>>> con-fig below. I wonder if any of the Stations based in the UK have
          >>>>> suggestions for best practice, I find reading material for UK APRS
          >>>>> operations rare and hard to find.
          >>>>>
          >>>>>
          >>>>>
          >>>> http://aprsisce.wikidot.com/digipeating is the Wiki page on digipeating
          >>>> and<DigiXForm>. These elements only work OUTSIDE of any RfPort at this
          >>>> time. In some future revision, they'll be port-specific (hence the
          >>>> placeholder), but for now, it's the global set that count. So, if you
          >>>> move your set of three outside of the RfPort and replace the commented
          >>>> one that's outside of that/those element(s), you should start digipeating.
          >>>>
          >>>> As far as I know, the UK and EU has adopted the "new paradigm" WIDEn-N,
          >>>> so your lines look right if you've got a good RF placement and want to
          >>>> run a WIDE2 digi. If you don't have large coverage, and only want to
          >>>> run a WIDE1 fill-in (which is what I run off 20' of my tower), just keep
          >>>> the first line (but I suspect you already understood that part).
          >>>>
          >>>> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
          >>>>
          >>>>
          >>>>
          >>>>> Thanks
          >>>>> Dan
          >>>>> M0MST
          >>>>>
          >>>>> _______
          >>>>>
          >>>>> <!--RFPort[1]-->
          >>>>> <RFPort Name="d710tes">
          >>>>> <Protocol>KWD710(Pkt)</Protocol>
          >>>>> <Device>COM3:19200,N,8,1</Device>
          >>>>> <RfBaud>1200</RfBaud>
          >>>>> <OpenCmd>^C^C^C~!!0</OpenCmd>
          >>>>> <OpenCmd>TC 1!?</OpenCmd>
          >>>>> <OpenCmd>TC 1!TS 1</OpenCmd>
          >>>>> <OpenCmd>TN 2,1!TN 2,1</OpenCmd>
          >>>>> <OpenCmd>^M!cmd:!5</OpenCmd>
          >>>>> <OpenCmd>DIG OFF</OpenCmd>
          >>>>> <OpenCmd>GB 4800</OpenCmd>
          >>>>> <OpenCmd>HB 1200</OpenCmd>
          >>>>> <OpenCmd>GPST $GPRMC</OpenCmd>
          >>>>> <OpenCmd>LTM 10</OpenCmd>
          >>>>> <OpenCmd>LTMH OFF</OpenCmd>
          >>>>> <OpenCmd>LOC E 0</OpenCmd>
          >>>>> <OpenCmd>M ON</OpenCmd>
          >>>>> <OpenCmd>MCOM ON</OpenCmd>
          >>>>> <OpenCmd>MS OFF</OpenCmd>
          >>>>> <OpenCmd>CONO OFF</OpenCmd>
          >>>>> <OpenCmd>P 250</OpenCmd>
          >>>>> <OpenCmd>UI OFF</OpenCmd>
          >>>>> <OpenCmd>UIF NOID</OpenCmd>
          >>>>> <OpenCmd>UIT %</OpenCmd>
          >>>>> <OpenCmd>X OFF</OpenCmd>
          >>>>> <OpenCmd>HEADER OFF</OpenCmd>
          >>>>> <OpenCmd>NE ON</OpenCmd>
          >>>>> <OpenCmd>NO OFF</OpenCmd>
          >>>>> <OpenCmd>ECHO OFF!cmd:!1.0</OpenCmd>
          >>>>> <OpenCmd>BEACON EVERY 0!cmd:!1.0</OpenCmd>
          >>>>> <OpenCmd>ECHO OFF!cmd:!1.00</OpenCmd>
          >>>>> <OpenCmd>BEACON EVERY 0!cmd:!1.00</OpenCmd>
          >>>>> <OpenCmd>^C^C^C~!!0</OpenCmd>
          >>>>> <CloseCmd>^M!cmd:!1</CloseCmd>
          >>>>> <CloseCmd>LTM 0</CloseCmd>
          >>>>> <CloseCmd>TC 1!TS 1</CloseCmd>
          >>>>> <CloseCmd>TN 0,0!TN 0,0</CloseCmd>
          >>>>> <QuietTime>0</QuietTime>
          >>>>> <Enabled>1</Enabled>
          >>>>> <XmitEnabled>1</XmitEnabled>
          >>>>> <RFtoISEnabled>1</RFtoISEnabled>
          >>>>> <IStoRFEnabled>1</IStoRFEnabled>
          >>>>> <MyCallNot3rd>0</MyCallNot3rd>
          >>>>> <BeaconingEnabled>1</BeaconingEnabled>
          >>>>> <BeaconPath></BeaconPath>
          >>>>> <TelemetryEnabled>0</TelemetryEnabled>
          >>>>> <TelemetryPath></TelemetryPath>
          >>>>> <!--DigiXform-->
          >>>>> <DigiXform>WIDE1-1=WIDE1*</DigiXform>
          >>>>> <DigiXform>WIDE2-1=WIDE2*</DigiXform>
          >>>>> <DigiXform>WIDE2-2=WIDE2-1</DigiXform>
          >>>>> </RFPort>
          >>>>> <!--RFPort[1]-->
          >>>>>
          >>>>>
          >>>>>
          >>> ------------------------------------
          >>>
          >>> Yahoo! Groups Links
          >>>
          >>>
          >>>
          >>>
          >>>
          >>>
          >> ------------------------------------
          >>
          >> Yahoo! Groups Links
          >>
          >>
          >>
          >>
          >
          >
          > ------------------------------------
          >
          > Yahoo! Groups Links
          >
          >
          >
          >
          >
        Your message has been successfully submitted and would be delivered to recipients shortly.