Loading ...
Sorry, an error occurred while loading the content.

Re: [aprsisce] PreFetch and DigixForm.

Expand Messages
  • Dan Rimell
    Thanks for Clearing That Up That below was my latest port config, Following your information below I have now changed it , Another copy. All understood
    Message 1 of 6 , Nov 2, 2010
    • 0 Attachment
      Thanks for Clearing That Up

      That below was my latest port config, Following your information below I
      have now changed it , Another copy. All understood regarding the
      prefetch, will try and watch the yellow circle :).

      Below is the latest config, yet to see any digi's as there are no
      mobiles in range of me at the moment

      Thanks
      Dan
      M0MST

      <Enables.APRSIS>1</Enables.APRSIS>
      <Enables.RFPorts>1</Enables.RFPorts>
      <Enables.RFPktLog>1</Enables.RFPktLog>
      <Enables.RFReceiveOnly>0</Enables.RFReceiveOnly>
      <Enables.GPS>0</Enables.GPS>
      <Enables.OSMFetch>1</Enables.OSMFetch>
      <Enables.Sound>0</Enables.Sound>
      <Enables.NotifyOnNewBulletin>0</Enables.NotifyOnNewBulletin>
      <Enables.CSVFile>1</Enables.CSVFile>
      <Enables.AutoSaveGPX>1</Enables.AutoSaveGPX>
      <Enables.Beacons>1</Enables.Beacons>
      <Enables.Telemetry>0</Enables.Telemetry>
      <Enables.AllMessages>0</Enables.AllMessages>
      <Enables.MyMessages>1</Enables.MyMessages>
      <Enables.HideQueries>0</Enables.HideQueries>
      <Enables.NotifyOnQuery>1</Enables.NotifyOnQuery>
      <Enables.NotifyOnNewMessage>1</Enables.NotifyOnNewMessage>
      <Enables.Debug>0</Enables.Debug>
      <Genius.MinTime>10</Genius.MinTime>
      <Genius.MaxTime>30</Genius.MaxTime>
      <Genius.TimeOnly>0</Genius.TimeOnly>
      <Genius.StartStop>1</Genius.StartStop>
      <Genius.BearingChange>30</Genius.BearingChange>
      <Genius.ForecastError>0.10</Genius.ForecastError>
      <Genius.MaxDistance>1.00</Genius.MaxDistance>
      <Symbol.Table>/</Symbol.Table>
      <Symbol.Symbol>#</Symbol.Symbol>
      <Beacon.Timestamp>1</Beacon.Timestamp>
      <Beacon.HHMMSS>1</Beacon.HHMMSS>
      <Beacon.CourseSpeed>1</Beacon.CourseSpeed>
      <Beacon.Altitude>1</Beacon.Altitude>
      <Beacon.Why>1</Beacon.Why>
      <Beacon.Comment>1</Beacon.Comment>
      <Beacon.DAO>0</Beacon.DAO>
      <Status.Enabled>1</Status.Enabled>
      <Status.Interval>10</Status.Interval>
      <Status.Timestamp>1</Status.Timestamp>
      <Status.GridSquare>1</Status.GridSquare>
      <Status.Text>APRSISCE/32 DIGI</Status.Text>
      <Status.Choice>APRSISCE/32 DIGI</Status.Choice>
      <Status.LastSent>2010-11-02T12:49:45</Status.LastSent>
      <Scale>14.5686</Scale>
      <Orientation>2</Orientation>
      <Latitude>52.131434</Latitude>
      <Longitude>-1.789009</Longitude>
      <Altitude>0.0000</Altitude>
      <BeaconPath>RAYNET-1,WIDE1-1,WIDE2-2</BeaconPath>
      <EMailServer>EMAIL-2</EMailServer>
      <WhoIsServer>WHO-IS</WhoIsServer>
      <!--MessageGroup-->
      <OSM.Zoom>10</OSM.Zoom>
      <OSM.Percent>50</OSM.Percent>
      <OSM.Server>tile.openstreetmap.org</OSM.Server>
      <OSM.Port>80</OSM.Port>
      <OSM.URLPrefix>/</OSM.URLPrefix>
      <OSM.Path>C:/Documents and
      Settings/Dan/Desktop/APRS/APRSIS-CE/OSMTiles/</OSM.Path>
      <OSM.MinMBFree>8</OSM.MinMBFree>
      <OSM.RetainDays>7</OSM.RetainDays>
      <OSM.RetainZoom>5</OSM.RetainZoom>
      <OSM.RevisionHours>0</OSM.RevisionHours>
      <MultiTrack.width>0</MultiTrack.width>
      <MultiTrack.height>0</MultiTrack.height>
      <MultiTrack.Orientation>2</MultiTrack.Orientation>
      <MultiTrack.Percent>50</MultiTrack.Percent>
      <MultiTrack.Zoom>11</MultiTrack.Zoom>
      <MultiTrack.Scale>8.0000</MultiTrack.Scale>
      <WindowPlacement.x>88</WindowPlacement.x>
      <WindowPlacement.y>116</WindowPlacement.y>
      <WindowPlacement.width>960</WindowPlacement.width>
      <WindowPlacement.height>554</WindowPlacement.height>
      <View.ConfirmOnClose>0</View.ConfirmOnClose>
      <View.Metric.Altitude>0</View.Metric.Altitude>
      <View.Metric.Distance>0</View.Metric.Distance>
      <View.Metric.Pressure>0</View.Metric.Pressure>
      <View.Metric.Rainfall>0</View.Metric.Rainfall>
      <View.Metric.Temperature>0</View.Metric.Temperature>
      <View.Metric.Windspeed>0</View.Metric.Windspeed>
      <View.VisibleLabelsMax>50</View.VisibleLabelsMax>
      <View.Altitude>1</View.Altitude>
      <View.Callsign>1</View.Callsign>
      <View.Callsign.NotMe>0</View.Callsign.NotMe>
      <View.Callsign.NotMine>0</View.Callsign.NotMine>
      <View.Speed.Beaconed>1</View.Speed.Beaconed>
      <View.Speed.Calculated>0</View.Speed.Calculated>
      <View.Speed.Averaged>0</View.Speed.Averaged>
      <View.Weather>1</View.Weather>
      <View.ZoomReverse>1</View.ZoomReverse>
      <View.ZoomMin>0</View.ZoomMin>
      <View.ZoomMax>23</View.ZoomMax>
      <View.WheelDelta>4</View.WheelDelta>
      <View.ScrollInternals>1</View.ScrollInternals>
      <Screen.DateSeconds>2367</Screen.DateSeconds>
      <Screen.DateTime>1</Screen.DateTime>
      <Screen.Altitude>1</Screen.Altitude>
      <Screen.GridSquare>1</Screen.GridSquare>
      <Screen.LatLon>1</Screen.LatLon>
      <Screen.Satellites>1</Screen.Satellites>
      <Screen.Tracks>1</Screen.Tracks>
      <Screen.Circle>1</Screen.Circle>
      <Screen.RedDot>1</Screen.RedDot>
      <Screen.CrossHairs>1</Screen.CrossHairs>
      <Screen.CrossHairTime>1000</Screen.CrossHairTime>
      <View.Custom.Primary></View.Custom.Primary>
      <View.Custom.Alternate></View.Custom.Alternate>
      <View.Flight.Primary>'O^</View.Flight.Primary>
      <View.Flight.Alternate>^</View.Flight.Alternate>
      <View.Mobile.Primary>!'<=>()*0CFOPRSUXY[\^abefgjkpsuv</View.Mobile.Primary>
      <View.Mobile.Alternate>>KOS^ksuv</View.Mobile.Alternate>
      <View.Weather.Primary>_W</View.Weather.Primary>
      <View.Weather.Alternate>([*:<@BDEFGHIJTUW_efgptwy{</View.Weather.Alternate>
      <Center.Latitude>52.147551</Center.Latitude>
      <Center.Longitude>-1.447993</Center.Longitude>
      <Preferred.Latitude>0.000000</Preferred.Latitude>
      <Preferred.Longitude>0.000000</Preferred.Longitude>
      <Preferred.Zoom>0</Preferred.Zoom>
      <Preferred.Scale>8.0000</Preferred.Scale>
      <Preferred.Orientation>0</Preferred.Orientation>
      <Tracking.Call>G6MMD-7</Tracking.Call>
      <Tracking.Center>0</Tracking.Center>
      <Tracking.Locked>0</Tracking.Locked>
      <APRSISPort>@...:14578</APRSISPort>
      <GPSPort></GPSPort>


      <!--RFPort[0]-->
      <RFPort Name="agw">
      <Protocol>AGW</Protocol>
      <Device>@LOCALHOST:8000</Device>
      <RfBaud>1200</RfBaud>
      <!--OpenCmd-->
      <!--CloseCmd-->
      <QuietTime>0</QuietTime>
      <Enabled>0</Enabled>
      <XmitEnabled>1</XmitEnabled>
      <RFtoISEnabled>1</RFtoISEnabled>
      <IStoRFEnabled>1</IStoRFEnabled>
      <MyCallNot3rd>0</MyCallNot3rd>
      <BeaconingEnabled>1</BeaconingEnabled>
      <BeaconPath></BeaconPath>
      <TelemetryEnabled>0</TelemetryEnabled>
      <TelemetryPath></TelemetryPath>
      <!--DigiXform-->
      </RFPort>
      <!--RFPort[0]-->

      <!--RFPort[1]-->
      <RFPort Name="d710tes">
      <Protocol>KWD710(Pkt)</Protocol>
      <Device>COM3:19200,N,8,1</Device>
      <RfBaud>1200</RfBaud>
      <OpenCmd>^C^C^C~!!0</OpenCmd>
      <OpenCmd>TC 1!?</OpenCmd>
      <OpenCmd>TC 1!TS 1</OpenCmd>
      <OpenCmd>TN 2,1!TN 2,1</OpenCmd>
      <OpenCmd>^M!cmd:!5</OpenCmd>
      <OpenCmd>DIG ON</OpenCmd>
      <OpenCmd>GB 4800</OpenCmd>
      <OpenCmd>HB 1200</OpenCmd>
      <OpenCmd>GPST $GPRMC</OpenCmd>
      <OpenCmd>LTM 10</OpenCmd>
      <OpenCmd>LTMH OFF</OpenCmd>
      <OpenCmd>LOC E 0</OpenCmd>
      <OpenCmd>M ON</OpenCmd>
      <OpenCmd>MCOM ON</OpenCmd>
      <OpenCmd>MS OFF</OpenCmd>
      <OpenCmd>CONO OFF</OpenCmd>
      <OpenCmd>P 250</OpenCmd>
      <OpenCmd>UI OFF</OpenCmd>
      <OpenCmd>UIF NOID</OpenCmd>
      <OpenCmd>UIT %</OpenCmd>
      <OpenCmd>X OFF</OpenCmd>
      <OpenCmd>HEADER OFF</OpenCmd>
      <OpenCmd>NE ON</OpenCmd>
      <OpenCmd>NO OFF</OpenCmd>
      <OpenCmd>ECHO OFF!cmd:!1.0</OpenCmd>
      <OpenCmd>BEACON EVERY 0!cmd:!1.0</OpenCmd>
      <OpenCmd>ECHO OFF!cmd:!1.00</OpenCmd>
      <OpenCmd>BEACON EVERY 0!cmd:!1.00</OpenCmd>
      <OpenCmd>^C^C^C~!!0</OpenCmd>
      <CloseCmd>^M!cmd:!1</CloseCmd>
      <CloseCmd>LTM 0</CloseCmd>
      <CloseCmd>TC 1!TS 1</CloseCmd>
      <CloseCmd>TN 0,0!TN 0,0</CloseCmd>
      <QuietTime>0</QuietTime>
      <Enabled>1</Enabled>
      <XmitEnabled>1</XmitEnabled>
      <RFtoISEnabled>1</RFtoISEnabled>
      <IStoRFEnabled>1</IStoRFEnabled>
      <MyCallNot3rd>0</MyCallNot3rd>
      <BeaconingEnabled>1</BeaconingEnabled>
      <BeaconPath></BeaconPath>
      <TelemetryEnabled>0</TelemetryEnabled>
      <TelemetryPath></TelemetryPath>
      <!--DigiXform-->
      </RFPort>
      <!--RFPort[1]-->

      <DigiXform>WIDE1-1=WIDE1*</DigiXform>
      <DigiXform>WIDE2-1=WIDE2*</DigiXform>
      <DigiXform>WIDE2-2=WIDE2-1</DigiXform>



      On 02/11/2010 12:21, Lynn W Deffenbaugh (Mr) wrote:
      >
      > Dan Rimell wrote:
      > > Just a few queries with issues I am having. I managed to solve the
      > issue
      > > with enabling Band B as the correct TNC Band with trail and error.
      > >
      >
      > Can you post your final <RfPort> section, particularly the <OpenCmd>s
      > and <CloseCmd>s? Or confirm that the latest one is the one listed
      > below? When I get to it, I'm hoping to add pages to the Wiki for the
      > various setups.
      >
      > > I did see the topic yesterday regarding mapping, which reminded me of
      > > something I have always had trouble with. Whenever I select the "pre
      > > fetch" option it will cause the software to "pause". By this I mean it
      > > states queued 2804\2975 tiles, and doesnt move forward. There seems to
      > > be no internet activity apart from the APRSIS feed. Wonder if im doing
      > > something wrong.
      > >
      >
      > There's a pregnant pause before it throws up the information box that
      > you mention while it tries to figure out how many tiles it needs versus
      > how many tiles are already in the cache. When you clear the
      > confirmation, all of the needed tiles are queued for fetching. There
      > should be a (really tiny at first) yellow circle that will expand out to
      > the range circle as the queue is worked off. This is the tile fetcher
      > progress indicator. You can also double-click any empty map section and
      > see the current state of the tile fetcher queue and threads.
      >
      > If you're using pre-fetch, you'll want to remember to disable the purger
      > (http://aprsisce.wikidot.com/moving-osmtiles) or your tiles will
      > disappear after a while.
      >
      > > DigiXForm - I have got three lines in here which I have added many
      > > months ago, However I am sure they are wrong, as I am not actually
      > > passing any digi traffic. I wonder if anyone can spot a mistake in this
      > > con-fig below. I wonder if any of the Stations based in the UK have
      > > suggestions for best practice, I find reading material for UK APRS
      > > operations rare and hard to find.
      > >
      >
      > http://aprsisce.wikidot.com/digipeating is the Wiki page on digipeating
      > and <DigiXForm>. These elements only work OUTSIDE of any RfPort at this
      > time. In some future revision, they'll be port-specific (hence the
      > placeholder), but for now, it's the global set that count. So, if you
      > move your set of three outside of the RfPort and replace the commented
      > one that's outside of that/those element(s), you should start digipeating.
      >
      > As far as I know, the UK and EU has adopted the "new paradigm" WIDEn-N,
      > so your lines look right if you've got a good RF placement and want to
      > run a WIDE2 digi. If you don't have large coverage, and only want to
      > run a WIDE1 fill-in (which is what I run off 20' of my tower), just keep
      > the first line (but I suspect you already understood that part).
      >
      > Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
      >
      > > Thanks
      > > Dan
      > > M0MST
      > >
      > > _______
      > >
      > > <!--RFPort[1]-->
      > > <RFPort Name="d710tes">
      > > <Protocol>KWD710(Pkt)</Protocol>
      > > <Device>COM3:19200,N,8,1</Device>
      > > <RfBaud>1200</RfBaud>
      > > <OpenCmd>^C^C^C~!!0</OpenCmd>
      > > <OpenCmd>TC 1!?</OpenCmd>
      > > <OpenCmd>TC 1!TS 1</OpenCmd>
      > > <OpenCmd>TN 2,1!TN 2,1</OpenCmd>
      > > <OpenCmd>^M!cmd:!5</OpenCmd>
      > > <OpenCmd>DIG OFF</OpenCmd>
      > > <OpenCmd>GB 4800</OpenCmd>
      > > <OpenCmd>HB 1200</OpenCmd>
      > > <OpenCmd>GPST $GPRMC</OpenCmd>
      > > <OpenCmd>LTM 10</OpenCmd>
      > > <OpenCmd>LTMH OFF</OpenCmd>
      > > <OpenCmd>LOC E 0</OpenCmd>
      > > <OpenCmd>M ON</OpenCmd>
      > > <OpenCmd>MCOM ON</OpenCmd>
      > > <OpenCmd>MS OFF</OpenCmd>
      > > <OpenCmd>CONO OFF</OpenCmd>
      > > <OpenCmd>P 250</OpenCmd>
      > > <OpenCmd>UI OFF</OpenCmd>
      > > <OpenCmd>UIF NOID</OpenCmd>
      > > <OpenCmd>UIT %</OpenCmd>
      > > <OpenCmd>X OFF</OpenCmd>
      > > <OpenCmd>HEADER OFF</OpenCmd>
      > > <OpenCmd>NE ON</OpenCmd>
      > > <OpenCmd>NO OFF</OpenCmd>
      > > <OpenCmd>ECHO OFF!cmd:!1.0</OpenCmd>
      > > <OpenCmd>BEACON EVERY 0!cmd:!1.0</OpenCmd>
      > > <OpenCmd>ECHO OFF!cmd:!1.00</OpenCmd>
      > > <OpenCmd>BEACON EVERY 0!cmd:!1.00</OpenCmd>
      > > <OpenCmd>^C^C^C~!!0</OpenCmd>
      > > <CloseCmd>^M!cmd:!1</CloseCmd>
      > > <CloseCmd>LTM 0</CloseCmd>
      > > <CloseCmd>TC 1!TS 1</CloseCmd>
      > > <CloseCmd>TN 0,0!TN 0,0</CloseCmd>
      > > <QuietTime>0</QuietTime>
      > > <Enabled>1</Enabled>
      > > <XmitEnabled>1</XmitEnabled>
      > > <RFtoISEnabled>1</RFtoISEnabled>
      > > <IStoRFEnabled>1</IStoRFEnabled>
      > > <MyCallNot3rd>0</MyCallNot3rd>
      > > <BeaconingEnabled>1</BeaconingEnabled>
      > > <BeaconPath></BeaconPath>
      > > <TelemetryEnabled>0</TelemetryEnabled>
      > > <TelemetryPath></TelemetryPath>
      > > <!--DigiXform-->
      > > <DigiXform>WIDE1-1=WIDE1*</DigiXform>
      > > <DigiXform>WIDE2-1=WIDE2*</DigiXform>
      > > <DigiXform>WIDE2-2=WIDE2-1</DigiXform>
      > > </RFPort>
      > > <!--RFPort[1]-->
      > >
      >
      >
    • Lynn W Deffenbaugh (Mr)
      As a final note, you can Enables / View Logs / Digi and then click Enable in that window s menu. Any Digipeater action (or inaction) will show up there.
      Message 2 of 6 , Nov 2, 2010
      • 0 Attachment
        As a final note, you can Enables / View Logs / Digi and then click
        Enable in that window's menu. Any Digipeater action (or inaction) will
        show up there.

        Thanks for the updated config. Now, if I can manage to not misplace it
        until I get it in the wiki...

        Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

        Dan Rimell wrote:
        > Thanks for Clearing That Up
        >
        > That below was my latest port config, Following your information below I
        > have now changed it , Another copy. All understood regarding the
        > prefetch, will try and watch the yellow circle :).
        >
        > Below is the latest config, yet to see any digi's as there are no
        > mobiles in range of me at the moment
        >
        > Thanks
        > Dan
        > M0MST
        >
        > <Enables.APRSIS>1</Enables.APRSIS>
        > <Enables.RFPorts>1</Enables.RFPorts>
        > <Enables.RFPktLog>1</Enables.RFPktLog>
        > <Enables.RFReceiveOnly>0</Enables.RFReceiveOnly>
        > <Enables.GPS>0</Enables.GPS>
        > <Enables.OSMFetch>1</Enables.OSMFetch>
        > <Enables.Sound>0</Enables.Sound>
        > <Enables.NotifyOnNewBulletin>0</Enables.NotifyOnNewBulletin>
        > <Enables.CSVFile>1</Enables.CSVFile>
        > <Enables.AutoSaveGPX>1</Enables.AutoSaveGPX>
        > <Enables.Beacons>1</Enables.Beacons>
        > <Enables.Telemetry>0</Enables.Telemetry>
        > <Enables.AllMessages>0</Enables.AllMessages>
        > <Enables.MyMessages>1</Enables.MyMessages>
        > <Enables.HideQueries>0</Enables.HideQueries>
        > <Enables.NotifyOnQuery>1</Enables.NotifyOnQuery>
        > <Enables.NotifyOnNewMessage>1</Enables.NotifyOnNewMessage>
        > <Enables.Debug>0</Enables.Debug>
        > <Genius.MinTime>10</Genius.MinTime>
        > <Genius.MaxTime>30</Genius.MaxTime>
        > <Genius.TimeOnly>0</Genius.TimeOnly>
        > <Genius.StartStop>1</Genius.StartStop>
        > <Genius.BearingChange>30</Genius.BearingChange>
        > <Genius.ForecastError>0.10</Genius.ForecastError>
        > <Genius.MaxDistance>1.00</Genius.MaxDistance>
        > <Symbol.Table>/</Symbol.Table>
        > <Symbol.Symbol>#</Symbol.Symbol>
        > <Beacon.Timestamp>1</Beacon.Timestamp>
        > <Beacon.HHMMSS>1</Beacon.HHMMSS>
        > <Beacon.CourseSpeed>1</Beacon.CourseSpeed>
        > <Beacon.Altitude>1</Beacon.Altitude>
        > <Beacon.Why>1</Beacon.Why>
        > <Beacon.Comment>1</Beacon.Comment>
        > <Beacon.DAO>0</Beacon.DAO>
        > <Status.Enabled>1</Status.Enabled>
        > <Status.Interval>10</Status.Interval>
        > <Status.Timestamp>1</Status.Timestamp>
        > <Status.GridSquare>1</Status.GridSquare>
        > <Status.Text>APRSISCE/32 DIGI</Status.Text>
        > <Status.Choice>APRSISCE/32 DIGI</Status.Choice>
        > <Status.LastSent>2010-11-02T12:49:45</Status.LastSent>
        > <Scale>14.5686</Scale>
        > <Orientation>2</Orientation>
        > <Latitude>52.131434</Latitude>
        > <Longitude>-1.789009</Longitude>
        > <Altitude>0.0000</Altitude>
        > <BeaconPath>RAYNET-1,WIDE1-1,WIDE2-2</BeaconPath>
        > <EMailServer>EMAIL-2</EMailServer>
        > <WhoIsServer>WHO-IS</WhoIsServer>
        > <!--MessageGroup-->
        > <OSM.Zoom>10</OSM.Zoom>
        > <OSM.Percent>50</OSM.Percent>
        > <OSM.Server>tile.openstreetmap.org</OSM.Server>
        > <OSM.Port>80</OSM.Port>
        > <OSM.URLPrefix>/</OSM.URLPrefix>
        > <OSM.Path>C:/Documents and
        > Settings/Dan/Desktop/APRS/APRSIS-CE/OSMTiles/</OSM.Path>
        > <OSM.MinMBFree>8</OSM.MinMBFree>
        > <OSM.RetainDays>7</OSM.RetainDays>
        > <OSM.RetainZoom>5</OSM.RetainZoom>
        > <OSM.RevisionHours>0</OSM.RevisionHours>
        > <MultiTrack.width>0</MultiTrack.width>
        > <MultiTrack.height>0</MultiTrack.height>
        > <MultiTrack.Orientation>2</MultiTrack.Orientation>
        > <MultiTrack.Percent>50</MultiTrack.Percent>
        > <MultiTrack.Zoom>11</MultiTrack.Zoom>
        > <MultiTrack.Scale>8.0000</MultiTrack.Scale>
        > <WindowPlacement.x>88</WindowPlacement.x>
        > <WindowPlacement.y>116</WindowPlacement.y>
        > <WindowPlacement.width>960</WindowPlacement.width>
        > <WindowPlacement.height>554</WindowPlacement.height>
        > <View.ConfirmOnClose>0</View.ConfirmOnClose>
        > <View.Metric.Altitude>0</View.Metric.Altitude>
        > <View.Metric.Distance>0</View.Metric.Distance>
        > <View.Metric.Pressure>0</View.Metric.Pressure>
        > <View.Metric.Rainfall>0</View.Metric.Rainfall>
        > <View.Metric.Temperature>0</View.Metric.Temperature>
        > <View.Metric.Windspeed>0</View.Metric.Windspeed>
        > <View.VisibleLabelsMax>50</View.VisibleLabelsMax>
        > <View.Altitude>1</View.Altitude>
        > <View.Callsign>1</View.Callsign>
        > <View.Callsign.NotMe>0</View.Callsign.NotMe>
        > <View.Callsign.NotMine>0</View.Callsign.NotMine>
        > <View.Speed.Beaconed>1</View.Speed.Beaconed>
        > <View.Speed.Calculated>0</View.Speed.Calculated>
        > <View.Speed.Averaged>0</View.Speed.Averaged>
        > <View.Weather>1</View.Weather>
        > <View.ZoomReverse>1</View.ZoomReverse>
        > <View.ZoomMin>0</View.ZoomMin>
        > <View.ZoomMax>23</View.ZoomMax>
        > <View.WheelDelta>4</View.WheelDelta>
        > <View.ScrollInternals>1</View.ScrollInternals>
        > <Screen.DateSeconds>2367</Screen.DateSeconds>
        > <Screen.DateTime>1</Screen.DateTime>
        > <Screen.Altitude>1</Screen.Altitude>
        > <Screen.GridSquare>1</Screen.GridSquare>
        > <Screen.LatLon>1</Screen.LatLon>
        > <Screen.Satellites>1</Screen.Satellites>
        > <Screen.Tracks>1</Screen.Tracks>
        > <Screen.Circle>1</Screen.Circle>
        > <Screen.RedDot>1</Screen.RedDot>
        > <Screen.CrossHairs>1</Screen.CrossHairs>
        > <Screen.CrossHairTime>1000</Screen.CrossHairTime>
        > <View.Custom.Primary></View.Custom.Primary>
        > <View.Custom.Alternate></View.Custom.Alternate>
        > <View.Flight.Primary>'O^</View.Flight.Primary>
        > <View.Flight.Alternate>^</View.Flight.Alternate>
        > <View.Mobile.Primary>!'<=>()*0CFOPRSUXY[\^abefgjkpsuv</View.Mobile.Primary>
        > <View.Mobile.Alternate>>KOS^ksuv</View.Mobile.Alternate>
        > <View.Weather.Primary>_W</View.Weather.Primary>
        > <View.Weather.Alternate>([*:<@BDEFGHIJTUW_efgptwy{</View.Weather.Alternate>
        > <Center.Latitude>52.147551</Center.Latitude>
        > <Center.Longitude>-1.447993</Center.Longitude>
        > <Preferred.Latitude>0.000000</Preferred.Latitude>
        > <Preferred.Longitude>0.000000</Preferred.Longitude>
        > <Preferred.Zoom>0</Preferred.Zoom>
        > <Preferred.Scale>8.0000</Preferred.Scale>
        > <Preferred.Orientation>0</Preferred.Orientation>
        > <Tracking.Call>G6MMD-7</Tracking.Call>
        > <Tracking.Center>0</Tracking.Center>
        > <Tracking.Locked>0</Tracking.Locked>
        > <APRSISPort>@...:14578</APRSISPort>
        > <GPSPort></GPSPort>
        >
        >
        > <!--RFPort[0]-->
        > <RFPort Name="agw">
        > <Protocol>AGW</Protocol>
        > <Device>@LOCALHOST:8000</Device>
        > <RfBaud>1200</RfBaud>
        > <!--OpenCmd-->
        > <!--CloseCmd-->
        > <QuietTime>0</QuietTime>
        > <Enabled>0</Enabled>
        > <XmitEnabled>1</XmitEnabled>
        > <RFtoISEnabled>1</RFtoISEnabled>
        > <IStoRFEnabled>1</IStoRFEnabled>
        > <MyCallNot3rd>0</MyCallNot3rd>
        > <BeaconingEnabled>1</BeaconingEnabled>
        > <BeaconPath></BeaconPath>
        > <TelemetryEnabled>0</TelemetryEnabled>
        > <TelemetryPath></TelemetryPath>
        > <!--DigiXform-->
        > </RFPort>
        > <!--RFPort[0]-->
        >
        > <!--RFPort[1]-->
        > <RFPort Name="d710tes">
        > <Protocol>KWD710(Pkt)</Protocol>
        > <Device>COM3:19200,N,8,1</Device>
        > <RfBaud>1200</RfBaud>
        > <OpenCmd>^C^C^C~!!0</OpenCmd>
        > <OpenCmd>TC 1!?</OpenCmd>
        > <OpenCmd>TC 1!TS 1</OpenCmd>
        > <OpenCmd>TN 2,1!TN 2,1</OpenCmd>
        > <OpenCmd>^M!cmd:!5</OpenCmd>
        > <OpenCmd>DIG ON</OpenCmd>
        > <OpenCmd>GB 4800</OpenCmd>
        > <OpenCmd>HB 1200</OpenCmd>
        > <OpenCmd>GPST $GPRMC</OpenCmd>
        > <OpenCmd>LTM 10</OpenCmd>
        > <OpenCmd>LTMH OFF</OpenCmd>
        > <OpenCmd>LOC E 0</OpenCmd>
        > <OpenCmd>M ON</OpenCmd>
        > <OpenCmd>MCOM ON</OpenCmd>
        > <OpenCmd>MS OFF</OpenCmd>
        > <OpenCmd>CONO OFF</OpenCmd>
        > <OpenCmd>P 250</OpenCmd>
        > <OpenCmd>UI OFF</OpenCmd>
        > <OpenCmd>UIF NOID</OpenCmd>
        > <OpenCmd>UIT %</OpenCmd>
        > <OpenCmd>X OFF</OpenCmd>
        > <OpenCmd>HEADER OFF</OpenCmd>
        > <OpenCmd>NE ON</OpenCmd>
        > <OpenCmd>NO OFF</OpenCmd>
        > <OpenCmd>ECHO OFF!cmd:!1.0</OpenCmd>
        > <OpenCmd>BEACON EVERY 0!cmd:!1.0</OpenCmd>
        > <OpenCmd>ECHO OFF!cmd:!1.00</OpenCmd>
        > <OpenCmd>BEACON EVERY 0!cmd:!1.00</OpenCmd>
        > <OpenCmd>^C^C^C~!!0</OpenCmd>
        > <CloseCmd>^M!cmd:!1</CloseCmd>
        > <CloseCmd>LTM 0</CloseCmd>
        > <CloseCmd>TC 1!TS 1</CloseCmd>
        > <CloseCmd>TN 0,0!TN 0,0</CloseCmd>
        > <QuietTime>0</QuietTime>
        > <Enabled>1</Enabled>
        > <XmitEnabled>1</XmitEnabled>
        > <RFtoISEnabled>1</RFtoISEnabled>
        > <IStoRFEnabled>1</IStoRFEnabled>
        > <MyCallNot3rd>0</MyCallNot3rd>
        > <BeaconingEnabled>1</BeaconingEnabled>
        > <BeaconPath></BeaconPath>
        > <TelemetryEnabled>0</TelemetryEnabled>
        > <TelemetryPath></TelemetryPath>
        > <!--DigiXform-->
        > </RFPort>
        > <!--RFPort[1]-->
        >
        > <DigiXform>WIDE1-1=WIDE1*</DigiXform>
        > <DigiXform>WIDE2-1=WIDE2*</DigiXform>
        > <DigiXform>WIDE2-2=WIDE2-1</DigiXform>
        >
        >
        >
        > On 02/11/2010 12:21, Lynn W Deffenbaugh (Mr) wrote:
        >
        >> Dan Rimell wrote:
        >>
        >>> Just a few queries with issues I am having. I managed to solve the
        >>>
        >> issue
        >>
        >>> with enabling Band B as the correct TNC Band with trail and error.
        >>>
        >>>
        >> Can you post your final <RfPort> section, particularly the <OpenCmd>s
        >> and <CloseCmd>s? Or confirm that the latest one is the one listed
        >> below? When I get to it, I'm hoping to add pages to the Wiki for the
        >> various setups.
        >>
        >>
        >>> I did see the topic yesterday regarding mapping, which reminded me of
        >>> something I have always had trouble with. Whenever I select the "pre
        >>> fetch" option it will cause the software to "pause". By this I mean it
        >>> states queued 2804\2975 tiles, and doesnt move forward. There seems to
        >>> be no internet activity apart from the APRSIS feed. Wonder if im doing
        >>> something wrong.
        >>>
        >>>
        >> There's a pregnant pause before it throws up the information box that
        >> you mention while it tries to figure out how many tiles it needs versus
        >> how many tiles are already in the cache. When you clear the
        >> confirmation, all of the needed tiles are queued for fetching. There
        >> should be a (really tiny at first) yellow circle that will expand out to
        >> the range circle as the queue is worked off. This is the tile fetcher
        >> progress indicator. You can also double-click any empty map section and
        >> see the current state of the tile fetcher queue and threads.
        >>
        >> If you're using pre-fetch, you'll want to remember to disable the purger
        >> (http://aprsisce.wikidot.com/moving-osmtiles) or your tiles will
        >> disappear after a while.
        >>
        >>
        >>> DigiXForm - I have got three lines in here which I have added many
        >>> months ago, However I am sure they are wrong, as I am not actually
        >>> passing any digi traffic. I wonder if anyone can spot a mistake in this
        >>> con-fig below. I wonder if any of the Stations based in the UK have
        >>> suggestions for best practice, I find reading material for UK APRS
        >>> operations rare and hard to find.
        >>>
        >>>
        >> http://aprsisce.wikidot.com/digipeating is the Wiki page on digipeating
        >> and <DigiXForm>. These elements only work OUTSIDE of any RfPort at this
        >> time. In some future revision, they'll be port-specific (hence the
        >> placeholder), but for now, it's the global set that count. So, if you
        >> move your set of three outside of the RfPort and replace the commented
        >> one that's outside of that/those element(s), you should start digipeating.
        >>
        >> As far as I know, the UK and EU has adopted the "new paradigm" WIDEn-N,
        >> so your lines look right if you've got a good RF placement and want to
        >> run a WIDE2 digi. If you don't have large coverage, and only want to
        >> run a WIDE1 fill-in (which is what I run off 20' of my tower), just keep
        >> the first line (but I suspect you already understood that part).
        >>
        >> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
        >>
        >>
        >>> Thanks
        >>> Dan
        >>> M0MST
        >>>
        >>> _______
        >>>
        >>> <!--RFPort[1]-->
        >>> <RFPort Name="d710tes">
        >>> <Protocol>KWD710(Pkt)</Protocol>
        >>> <Device>COM3:19200,N,8,1</Device>
        >>> <RfBaud>1200</RfBaud>
        >>> <OpenCmd>^C^C^C~!!0</OpenCmd>
        >>> <OpenCmd>TC 1!?</OpenCmd>
        >>> <OpenCmd>TC 1!TS 1</OpenCmd>
        >>> <OpenCmd>TN 2,1!TN 2,1</OpenCmd>
        >>> <OpenCmd>^M!cmd:!5</OpenCmd>
        >>> <OpenCmd>DIG OFF</OpenCmd>
        >>> <OpenCmd>GB 4800</OpenCmd>
        >>> <OpenCmd>HB 1200</OpenCmd>
        >>> <OpenCmd>GPST $GPRMC</OpenCmd>
        >>> <OpenCmd>LTM 10</OpenCmd>
        >>> <OpenCmd>LTMH OFF</OpenCmd>
        >>> <OpenCmd>LOC E 0</OpenCmd>
        >>> <OpenCmd>M ON</OpenCmd>
        >>> <OpenCmd>MCOM ON</OpenCmd>
        >>> <OpenCmd>MS OFF</OpenCmd>
        >>> <OpenCmd>CONO OFF</OpenCmd>
        >>> <OpenCmd>P 250</OpenCmd>
        >>> <OpenCmd>UI OFF</OpenCmd>
        >>> <OpenCmd>UIF NOID</OpenCmd>
        >>> <OpenCmd>UIT %</OpenCmd>
        >>> <OpenCmd>X OFF</OpenCmd>
        >>> <OpenCmd>HEADER OFF</OpenCmd>
        >>> <OpenCmd>NE ON</OpenCmd>
        >>> <OpenCmd>NO OFF</OpenCmd>
        >>> <OpenCmd>ECHO OFF!cmd:!1.0</OpenCmd>
        >>> <OpenCmd>BEACON EVERY 0!cmd:!1.0</OpenCmd>
        >>> <OpenCmd>ECHO OFF!cmd:!1.00</OpenCmd>
        >>> <OpenCmd>BEACON EVERY 0!cmd:!1.00</OpenCmd>
        >>> <OpenCmd>^C^C^C~!!0</OpenCmd>
        >>> <CloseCmd>^M!cmd:!1</CloseCmd>
        >>> <CloseCmd>LTM 0</CloseCmd>
        >>> <CloseCmd>TC 1!TS 1</CloseCmd>
        >>> <CloseCmd>TN 0,0!TN 0,0</CloseCmd>
        >>> <QuietTime>0</QuietTime>
        >>> <Enabled>1</Enabled>
        >>> <XmitEnabled>1</XmitEnabled>
        >>> <RFtoISEnabled>1</RFtoISEnabled>
        >>> <IStoRFEnabled>1</IStoRFEnabled>
        >>> <MyCallNot3rd>0</MyCallNot3rd>
        >>> <BeaconingEnabled>1</BeaconingEnabled>
        >>> <BeaconPath></BeaconPath>
        >>> <TelemetryEnabled>0</TelemetryEnabled>
        >>> <TelemetryPath></TelemetryPath>
        >>> <!--DigiXform-->
        >>> <DigiXform>WIDE1-1=WIDE1*</DigiXform>
        >>> <DigiXform>WIDE2-1=WIDE2*</DigiXform>
        >>> <DigiXform>WIDE2-2=WIDE2-1</DigiXform>
        >>> </RFPort>
        >>> <!--RFPort[1]-->
        >>>
        >>>
        >>
        >
        >
        > ------------------------------------
        >
        > Yahoo! Groups Links
        >
        >
        >
        >
        >
      • Dan Rimell
        Thats excellent, Ill email you the config off group. Looking at the digi log it is working. Thanks Dan
        Message 3 of 6 , Nov 2, 2010
        • 0 Attachment
          Thats excellent, Ill email you the config off group. Looking at the digi
          log it is working.

          Thanks
          Dan

          On 02/11/2010 13:06, Lynn W Deffenbaugh (Mr) wrote:
          > As a final note, you can Enables / View Logs / Digi and then click
          > Enable in that window's menu. Any Digipeater action (or inaction) will
          > show up there.
          >
          > Thanks for the updated config. Now, if I can manage to not misplace it
          > until I get it in the wiki...
          >
          > Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
          >
          > Dan Rimell wrote:
          >> Thanks for Clearing That Up
          >>
          >> That below was my latest port config, Following your information below I
          >> have now changed it , Another copy. All understood regarding the
          >> prefetch, will try and watch the yellow circle :).
          >>
          >> Below is the latest config, yet to see any digi's as there are no
          >> mobiles in range of me at the moment
          >>
          >> Thanks
          >> Dan
          >> M0MST
          >>
          >> <Enables.APRSIS>1</Enables.APRSIS>
          >> <Enables.RFPorts>1</Enables.RFPorts>
          >> <Enables.RFPktLog>1</Enables.RFPktLog>
          >> <Enables.RFReceiveOnly>0</Enables.RFReceiveOnly>
          >> <Enables.GPS>0</Enables.GPS>
          >> <Enables.OSMFetch>1</Enables.OSMFetch>
          >> <Enables.Sound>0</Enables.Sound>
          >> <Enables.NotifyOnNewBulletin>0</Enables.NotifyOnNewBulletin>
          >> <Enables.CSVFile>1</Enables.CSVFile>
          >> <Enables.AutoSaveGPX>1</Enables.AutoSaveGPX>
          >> <Enables.Beacons>1</Enables.Beacons>
          >> <Enables.Telemetry>0</Enables.Telemetry>
          >> <Enables.AllMessages>0</Enables.AllMessages>
          >> <Enables.MyMessages>1</Enables.MyMessages>
          >> <Enables.HideQueries>0</Enables.HideQueries>
          >> <Enables.NotifyOnQuery>1</Enables.NotifyOnQuery>
          >> <Enables.NotifyOnNewMessage>1</Enables.NotifyOnNewMessage>
          >> <Enables.Debug>0</Enables.Debug>
          >> <Genius.MinTime>10</Genius.MinTime>
          >> <Genius.MaxTime>30</Genius.MaxTime>
          >> <Genius.TimeOnly>0</Genius.TimeOnly>
          >> <Genius.StartStop>1</Genius.StartStop>
          >> <Genius.BearingChange>30</Genius.BearingChange>
          >> <Genius.ForecastError>0.10</Genius.ForecastError>
          >> <Genius.MaxDistance>1.00</Genius.MaxDistance>
          >> <Symbol.Table>/</Symbol.Table>
          >> <Symbol.Symbol>#</Symbol.Symbol>
          >> <Beacon.Timestamp>1</Beacon.Timestamp>
          >> <Beacon.HHMMSS>1</Beacon.HHMMSS>
          >> <Beacon.CourseSpeed>1</Beacon.CourseSpeed>
          >> <Beacon.Altitude>1</Beacon.Altitude>
          >> <Beacon.Why>1</Beacon.Why>
          >> <Beacon.Comment>1</Beacon.Comment>
          >> <Beacon.DAO>0</Beacon.DAO>
          >> <Status.Enabled>1</Status.Enabled>
          >> <Status.Interval>10</Status.Interval>
          >> <Status.Timestamp>1</Status.Timestamp>
          >> <Status.GridSquare>1</Status.GridSquare>
          >> <Status.Text>APRSISCE/32 DIGI</Status.Text>
          >> <Status.Choice>APRSISCE/32 DIGI</Status.Choice>
          >> <Status.LastSent>2010-11-02T12:49:45</Status.LastSent>
          >> <Scale>14.5686</Scale>
          >> <Orientation>2</Orientation>
          >> <Latitude>52.131434</Latitude>
          >> <Longitude>-1.789009</Longitude>
          >> <Altitude>0.0000</Altitude>
          >> <BeaconPath>RAYNET-1,WIDE1-1,WIDE2-2</BeaconPath>
          >> <EMailServer>EMAIL-2</EMailServer>
          >> <WhoIsServer>WHO-IS</WhoIsServer>
          >> <!--MessageGroup-->
          >> <OSM.Zoom>10</OSM.Zoom>
          >> <OSM.Percent>50</OSM.Percent>
          >> <OSM.Server>tile.openstreetmap.org</OSM.Server>
          >> <OSM.Port>80</OSM.Port>
          >> <OSM.URLPrefix>/</OSM.URLPrefix>
          >> <OSM.Path>C:/Documents and
          >> Settings/Dan/Desktop/APRS/APRSIS-CE/OSMTiles/</OSM.Path>
          >> <OSM.MinMBFree>8</OSM.MinMBFree>
          >> <OSM.RetainDays>7</OSM.RetainDays>
          >> <OSM.RetainZoom>5</OSM.RetainZoom>
          >> <OSM.RevisionHours>0</OSM.RevisionHours>
          >> <MultiTrack.width>0</MultiTrack.width>
          >> <MultiTrack.height>0</MultiTrack.height>
          >> <MultiTrack.Orientation>2</MultiTrack.Orientation>
          >> <MultiTrack.Percent>50</MultiTrack.Percent>
          >> <MultiTrack.Zoom>11</MultiTrack.Zoom>
          >> <MultiTrack.Scale>8.0000</MultiTrack.Scale>
          >> <WindowPlacement.x>88</WindowPlacement.x>
          >> <WindowPlacement.y>116</WindowPlacement.y>
          >> <WindowPlacement.width>960</WindowPlacement.width>
          >> <WindowPlacement.height>554</WindowPlacement.height>
          >> <View.ConfirmOnClose>0</View.ConfirmOnClose>
          >> <View.Metric.Altitude>0</View.Metric.Altitude>
          >> <View.Metric.Distance>0</View.Metric.Distance>
          >> <View.Metric.Pressure>0</View.Metric.Pressure>
          >> <View.Metric.Rainfall>0</View.Metric.Rainfall>
          >> <View.Metric.Temperature>0</View.Metric.Temperature>
          >> <View.Metric.Windspeed>0</View.Metric.Windspeed>
          >> <View.VisibleLabelsMax>50</View.VisibleLabelsMax>
          >> <View.Altitude>1</View.Altitude>
          >> <View.Callsign>1</View.Callsign>
          >> <View.Callsign.NotMe>0</View.Callsign.NotMe>
          >> <View.Callsign.NotMine>0</View.Callsign.NotMine>
          >> <View.Speed.Beaconed>1</View.Speed.Beaconed>
          >> <View.Speed.Calculated>0</View.Speed.Calculated>
          >> <View.Speed.Averaged>0</View.Speed.Averaged>
          >> <View.Weather>1</View.Weather>
          >> <View.ZoomReverse>1</View.ZoomReverse>
          >> <View.ZoomMin>0</View.ZoomMin>
          >> <View.ZoomMax>23</View.ZoomMax>
          >> <View.WheelDelta>4</View.WheelDelta>
          >> <View.ScrollInternals>1</View.ScrollInternals>
          >> <Screen.DateSeconds>2367</Screen.DateSeconds>
          >> <Screen.DateTime>1</Screen.DateTime>
          >> <Screen.Altitude>1</Screen.Altitude>
          >> <Screen.GridSquare>1</Screen.GridSquare>
          >> <Screen.LatLon>1</Screen.LatLon>
          >> <Screen.Satellites>1</Screen.Satellites>
          >> <Screen.Tracks>1</Screen.Tracks>
          >> <Screen.Circle>1</Screen.Circle>
          >> <Screen.RedDot>1</Screen.RedDot>
          >> <Screen.CrossHairs>1</Screen.CrossHairs>
          >> <Screen.CrossHairTime>1000</Screen.CrossHairTime>
          >> <View.Custom.Primary></View.Custom.Primary>
          >> <View.Custom.Alternate></View.Custom.Alternate>
          >> <View.Flight.Primary>'O^</View.Flight.Primary>
          >> <View.Flight.Alternate>^</View.Flight.Alternate>
          >> <View.Mobile.Primary>!'<=>()*0CFOPRSUXY[\^abefgjkpsuv</View.Mobile.Primary>
          >> <View.Mobile.Alternate>>KOS^ksuv</View.Mobile.Alternate>
          >> <View.Weather.Primary>_W</View.Weather.Primary>
          >> <View.Weather.Alternate>([*:<@BDEFGHIJTUW_efgptwy{</View.Weather.Alternate>
          >> <Center.Latitude>52.147551</Center.Latitude>
          >> <Center.Longitude>-1.447993</Center.Longitude>
          >> <Preferred.Latitude>0.000000</Preferred.Latitude>
          >> <Preferred.Longitude>0.000000</Preferred.Longitude>
          >> <Preferred.Zoom>0</Preferred.Zoom>
          >> <Preferred.Scale>8.0000</Preferred.Scale>
          >> <Preferred.Orientation>0</Preferred.Orientation>
          >> <Tracking.Call>G6MMD-7</Tracking.Call>
          >> <Tracking.Center>0</Tracking.Center>
          >> <Tracking.Locked>0</Tracking.Locked>
          >> <APRSISPort>@...:14578</APRSISPort>
          >> <GPSPort></GPSPort>
          >>
          >>
          >> <!--RFPort[0]-->
          >> <RFPort Name="agw">
          >> <Protocol>AGW</Protocol>
          >> <Device>@LOCALHOST:8000</Device>
          >> <RfBaud>1200</RfBaud>
          >> <!--OpenCmd-->
          >> <!--CloseCmd-->
          >> <QuietTime>0</QuietTime>
          >> <Enabled>0</Enabled>
          >> <XmitEnabled>1</XmitEnabled>
          >> <RFtoISEnabled>1</RFtoISEnabled>
          >> <IStoRFEnabled>1</IStoRFEnabled>
          >> <MyCallNot3rd>0</MyCallNot3rd>
          >> <BeaconingEnabled>1</BeaconingEnabled>
          >> <BeaconPath></BeaconPath>
          >> <TelemetryEnabled>0</TelemetryEnabled>
          >> <TelemetryPath></TelemetryPath>
          >> <!--DigiXform-->
          >> </RFPort>
          >> <!--RFPort[0]-->
          >>
          >> <!--RFPort[1]-->
          >> <RFPort Name="d710tes">
          >> <Protocol>KWD710(Pkt)</Protocol>
          >> <Device>COM3:19200,N,8,1</Device>
          >> <RfBaud>1200</RfBaud>
          >> <OpenCmd>^C^C^C~!!0</OpenCmd>
          >> <OpenCmd>TC 1!?</OpenCmd>
          >> <OpenCmd>TC 1!TS 1</OpenCmd>
          >> <OpenCmd>TN 2,1!TN 2,1</OpenCmd>
          >> <OpenCmd>^M!cmd:!5</OpenCmd>
          >> <OpenCmd>DIG ON</OpenCmd>
          >> <OpenCmd>GB 4800</OpenCmd>
          >> <OpenCmd>HB 1200</OpenCmd>
          >> <OpenCmd>GPST $GPRMC</OpenCmd>
          >> <OpenCmd>LTM 10</OpenCmd>
          >> <OpenCmd>LTMH OFF</OpenCmd>
          >> <OpenCmd>LOC E 0</OpenCmd>
          >> <OpenCmd>M ON</OpenCmd>
          >> <OpenCmd>MCOM ON</OpenCmd>
          >> <OpenCmd>MS OFF</OpenCmd>
          >> <OpenCmd>CONO OFF</OpenCmd>
          >> <OpenCmd>P 250</OpenCmd>
          >> <OpenCmd>UI OFF</OpenCmd>
          >> <OpenCmd>UIF NOID</OpenCmd>
          >> <OpenCmd>UIT %</OpenCmd>
          >> <OpenCmd>X OFF</OpenCmd>
          >> <OpenCmd>HEADER OFF</OpenCmd>
          >> <OpenCmd>NE ON</OpenCmd>
          >> <OpenCmd>NO OFF</OpenCmd>
          >> <OpenCmd>ECHO OFF!cmd:!1.0</OpenCmd>
          >> <OpenCmd>BEACON EVERY 0!cmd:!1.0</OpenCmd>
          >> <OpenCmd>ECHO OFF!cmd:!1.00</OpenCmd>
          >> <OpenCmd>BEACON EVERY 0!cmd:!1.00</OpenCmd>
          >> <OpenCmd>^C^C^C~!!0</OpenCmd>
          >> <CloseCmd>^M!cmd:!1</CloseCmd>
          >> <CloseCmd>LTM 0</CloseCmd>
          >> <CloseCmd>TC 1!TS 1</CloseCmd>
          >> <CloseCmd>TN 0,0!TN 0,0</CloseCmd>
          >> <QuietTime>0</QuietTime>
          >> <Enabled>1</Enabled>
          >> <XmitEnabled>1</XmitEnabled>
          >> <RFtoISEnabled>1</RFtoISEnabled>
          >> <IStoRFEnabled>1</IStoRFEnabled>
          >> <MyCallNot3rd>0</MyCallNot3rd>
          >> <BeaconingEnabled>1</BeaconingEnabled>
          >> <BeaconPath></BeaconPath>
          >> <TelemetryEnabled>0</TelemetryEnabled>
          >> <TelemetryPath></TelemetryPath>
          >> <!--DigiXform-->
          >> </RFPort>
          >> <!--RFPort[1]-->
          >>
          >> <DigiXform>WIDE1-1=WIDE1*</DigiXform>
          >> <DigiXform>WIDE2-1=WIDE2*</DigiXform>
          >> <DigiXform>WIDE2-2=WIDE2-1</DigiXform>
          >>
          >>
          >>
          >> On 02/11/2010 12:21, Lynn W Deffenbaugh (Mr) wrote:
          >>
          >>> Dan Rimell wrote:
          >>>
          >>>> Just a few queries with issues I am having. I managed to solve the
          >>>>
          >>> issue
          >>>
          >>>> with enabling Band B as the correct TNC Band with trail and error.
          >>>>
          >>>>
          >>> Can you post your final<RfPort> section, particularly the<OpenCmd>s
          >>> and<CloseCmd>s? Or confirm that the latest one is the one listed
          >>> below? When I get to it, I'm hoping to add pages to the Wiki for the
          >>> various setups.
          >>>
          >>>
          >>>> I did see the topic yesterday regarding mapping, which reminded me of
          >>>> something I have always had trouble with. Whenever I select the "pre
          >>>> fetch" option it will cause the software to "pause". By this I mean it
          >>>> states queued 2804\2975 tiles, and doesnt move forward. There seems to
          >>>> be no internet activity apart from the APRSIS feed. Wonder if im doing
          >>>> something wrong.
          >>>>
          >>>>
          >>> There's a pregnant pause before it throws up the information box that
          >>> you mention while it tries to figure out how many tiles it needs versus
          >>> how many tiles are already in the cache. When you clear the
          >>> confirmation, all of the needed tiles are queued for fetching. There
          >>> should be a (really tiny at first) yellow circle that will expand out to
          >>> the range circle as the queue is worked off. This is the tile fetcher
          >>> progress indicator. You can also double-click any empty map section and
          >>> see the current state of the tile fetcher queue and threads.
          >>>
          >>> If you're using pre-fetch, you'll want to remember to disable the purger
          >>> (http://aprsisce.wikidot.com/moving-osmtiles) or your tiles will
          >>> disappear after a while.
          >>>
          >>>
          >>>> DigiXForm - I have got three lines in here which I have added many
          >>>> months ago, However I am sure they are wrong, as I am not actually
          >>>> passing any digi traffic. I wonder if anyone can spot a mistake in this
          >>>> con-fig below. I wonder if any of the Stations based in the UK have
          >>>> suggestions for best practice, I find reading material for UK APRS
          >>>> operations rare and hard to find.
          >>>>
          >>>>
          >>> http://aprsisce.wikidot.com/digipeating is the Wiki page on digipeating
          >>> and<DigiXForm>. These elements only work OUTSIDE of any RfPort at this
          >>> time. In some future revision, they'll be port-specific (hence the
          >>> placeholder), but for now, it's the global set that count. So, if you
          >>> move your set of three outside of the RfPort and replace the commented
          >>> one that's outside of that/those element(s), you should start digipeating.
          >>>
          >>> As far as I know, the UK and EU has adopted the "new paradigm" WIDEn-N,
          >>> so your lines look right if you've got a good RF placement and want to
          >>> run a WIDE2 digi. If you don't have large coverage, and only want to
          >>> run a WIDE1 fill-in (which is what I run off 20' of my tower), just keep
          >>> the first line (but I suspect you already understood that part).
          >>>
          >>> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
          >>>
          >>>
          >>>> Thanks
          >>>> Dan
          >>>> M0MST
          >>>>
          >>>> _______
          >>>>
          >>>> <!--RFPort[1]-->
          >>>> <RFPort Name="d710tes">
          >>>> <Protocol>KWD710(Pkt)</Protocol>
          >>>> <Device>COM3:19200,N,8,1</Device>
          >>>> <RfBaud>1200</RfBaud>
          >>>> <OpenCmd>^C^C^C~!!0</OpenCmd>
          >>>> <OpenCmd>TC 1!?</OpenCmd>
          >>>> <OpenCmd>TC 1!TS 1</OpenCmd>
          >>>> <OpenCmd>TN 2,1!TN 2,1</OpenCmd>
          >>>> <OpenCmd>^M!cmd:!5</OpenCmd>
          >>>> <OpenCmd>DIG OFF</OpenCmd>
          >>>> <OpenCmd>GB 4800</OpenCmd>
          >>>> <OpenCmd>HB 1200</OpenCmd>
          >>>> <OpenCmd>GPST $GPRMC</OpenCmd>
          >>>> <OpenCmd>LTM 10</OpenCmd>
          >>>> <OpenCmd>LTMH OFF</OpenCmd>
          >>>> <OpenCmd>LOC E 0</OpenCmd>
          >>>> <OpenCmd>M ON</OpenCmd>
          >>>> <OpenCmd>MCOM ON</OpenCmd>
          >>>> <OpenCmd>MS OFF</OpenCmd>
          >>>> <OpenCmd>CONO OFF</OpenCmd>
          >>>> <OpenCmd>P 250</OpenCmd>
          >>>> <OpenCmd>UI OFF</OpenCmd>
          >>>> <OpenCmd>UIF NOID</OpenCmd>
          >>>> <OpenCmd>UIT %</OpenCmd>
          >>>> <OpenCmd>X OFF</OpenCmd>
          >>>> <OpenCmd>HEADER OFF</OpenCmd>
          >>>> <OpenCmd>NE ON</OpenCmd>
          >>>> <OpenCmd>NO OFF</OpenCmd>
          >>>> <OpenCmd>ECHO OFF!cmd:!1.0</OpenCmd>
          >>>> <OpenCmd>BEACON EVERY 0!cmd:!1.0</OpenCmd>
          >>>> <OpenCmd>ECHO OFF!cmd:!1.00</OpenCmd>
          >>>> <OpenCmd>BEACON EVERY 0!cmd:!1.00</OpenCmd>
          >>>> <OpenCmd>^C^C^C~!!0</OpenCmd>
          >>>> <CloseCmd>^M!cmd:!1</CloseCmd>
          >>>> <CloseCmd>LTM 0</CloseCmd>
          >>>> <CloseCmd>TC 1!TS 1</CloseCmd>
          >>>> <CloseCmd>TN 0,0!TN 0,0</CloseCmd>
          >>>> <QuietTime>0</QuietTime>
          >>>> <Enabled>1</Enabled>
          >>>> <XmitEnabled>1</XmitEnabled>
          >>>> <RFtoISEnabled>1</RFtoISEnabled>
          >>>> <IStoRFEnabled>1</IStoRFEnabled>
          >>>> <MyCallNot3rd>0</MyCallNot3rd>
          >>>> <BeaconingEnabled>1</BeaconingEnabled>
          >>>> <BeaconPath></BeaconPath>
          >>>> <TelemetryEnabled>0</TelemetryEnabled>
          >>>> <TelemetryPath></TelemetryPath>
          >>>> <!--DigiXform-->
          >>>> <DigiXform>WIDE1-1=WIDE1*</DigiXform>
          >>>> <DigiXform>WIDE2-1=WIDE2*</DigiXform>
          >>>> <DigiXform>WIDE2-2=WIDE2-1</DigiXform>
          >>>> </RFPort>
          >>>> <!--RFPort[1]-->
          >>>>
          >>>>
          >>>
          >>
          >> ------------------------------------
          >>
          >> Yahoo! Groups Links
          >>
          >>
          >>
          >>
          >>
          >
          >
          > ------------------------------------
          >
          > Yahoo! Groups Links
          >
          >
          >
        • Lynn W Deffenbaugh (Mr)
          For Igates and Digis, I also keep a copy of the Transmit log open and enabled as well as Enables / Rf Ports / Log All. This gives me a record (in the
          Message 4 of 6 , Nov 2, 2010
          • 0 Attachment
            For Igates and Digis, I also keep a copy of the Transmit log open and
            enabled as well as Enables / Rf Ports / Log All. This gives me a record
            (in the APRSIS32*.LOG and *.PKT files) of what I've been doing on RF.

            Thanks for the config file. I received it already.

            Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

            Dan Rimell wrote:
            > Thats excellent, Ill email you the config off group. Looking at the digi
            > log it is working.
            >
            > Thanks
            > Dan
            >
            > On 02/11/2010 13:06, Lynn W Deffenbaugh (Mr) wrote:
            >
            >> As a final note, you can Enables / View Logs / Digi and then click
            >> Enable in that window's menu. Any Digipeater action (or inaction) will
            >> show up there.
            >>
            >> Thanks for the updated config. Now, if I can manage to not misplace it
            >> until I get it in the wiki...
            >>
            >> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
            >>
            >> Dan Rimell wrote:
            >>
            >>> Thanks for Clearing That Up
            >>>
            >>> That below was my latest port config, Following your information below I
            >>> have now changed it , Another copy. All understood regarding the
            >>> prefetch, will try and watch the yellow circle :).
            >>>
            >>> Below is the latest config, yet to see any digi's as there are no
            >>> mobiles in range of me at the moment
            >>>
            >>> Thanks
            >>> Dan
            >>> M0MST
            >>>
            >>> <Enables.APRSIS>1</Enables.APRSIS>
            >>> <Enables.RFPorts>1</Enables.RFPorts>
            >>> <Enables.RFPktLog>1</Enables.RFPktLog>
            >>> <Enables.RFReceiveOnly>0</Enables.RFReceiveOnly>
            >>> <Enables.GPS>0</Enables.GPS>
            >>> <Enables.OSMFetch>1</Enables.OSMFetch>
            >>> <Enables.Sound>0</Enables.Sound>
            >>> <Enables.NotifyOnNewBulletin>0</Enables.NotifyOnNewBulletin>
            >>> <Enables.CSVFile>1</Enables.CSVFile>
            >>> <Enables.AutoSaveGPX>1</Enables.AutoSaveGPX>
            >>> <Enables.Beacons>1</Enables.Beacons>
            >>> <Enables.Telemetry>0</Enables.Telemetry>
            >>> <Enables.AllMessages>0</Enables.AllMessages>
            >>> <Enables.MyMessages>1</Enables.MyMessages>
            >>> <Enables.HideQueries>0</Enables.HideQueries>
            >>> <Enables.NotifyOnQuery>1</Enables.NotifyOnQuery>
            >>> <Enables.NotifyOnNewMessage>1</Enables.NotifyOnNewMessage>
            >>> <Enables.Debug>0</Enables.Debug>
            >>> <Genius.MinTime>10</Genius.MinTime>
            >>> <Genius.MaxTime>30</Genius.MaxTime>
            >>> <Genius.TimeOnly>0</Genius.TimeOnly>
            >>> <Genius.StartStop>1</Genius.StartStop>
            >>> <Genius.BearingChange>30</Genius.BearingChange>
            >>> <Genius.ForecastError>0.10</Genius.ForecastError>
            >>> <Genius.MaxDistance>1.00</Genius.MaxDistance>
            >>> <Symbol.Table>/</Symbol.Table>
            >>> <Symbol.Symbol>#</Symbol.Symbol>
            >>> <Beacon.Timestamp>1</Beacon.Timestamp>
            >>> <Beacon.HHMMSS>1</Beacon.HHMMSS>
            >>> <Beacon.CourseSpeed>1</Beacon.CourseSpeed>
            >>> <Beacon.Altitude>1</Beacon.Altitude>
            >>> <Beacon.Why>1</Beacon.Why>
            >>> <Beacon.Comment>1</Beacon.Comment>
            >>> <Beacon.DAO>0</Beacon.DAO>
            >>> <Status.Enabled>1</Status.Enabled>
            >>> <Status.Interval>10</Status.Interval>
            >>> <Status.Timestamp>1</Status.Timestamp>
            >>> <Status.GridSquare>1</Status.GridSquare>
            >>> <Status.Text>APRSISCE/32 DIGI</Status.Text>
            >>> <Status.Choice>APRSISCE/32 DIGI</Status.Choice>
            >>> <Status.LastSent>2010-11-02T12:49:45</Status.LastSent>
            >>> <Scale>14.5686</Scale>
            >>> <Orientation>2</Orientation>
            >>> <Latitude>52.131434</Latitude>
            >>> <Longitude>-1.789009</Longitude>
            >>> <Altitude>0.0000</Altitude>
            >>> <BeaconPath>RAYNET-1,WIDE1-1,WIDE2-2</BeaconPath>
            >>> <EMailServer>EMAIL-2</EMailServer>
            >>> <WhoIsServer>WHO-IS</WhoIsServer>
            >>> <!--MessageGroup-->
            >>> <OSM.Zoom>10</OSM.Zoom>
            >>> <OSM.Percent>50</OSM.Percent>
            >>> <OSM.Server>tile.openstreetmap.org</OSM.Server>
            >>> <OSM.Port>80</OSM.Port>
            >>> <OSM.URLPrefix>/</OSM.URLPrefix>
            >>> <OSM.Path>C:/Documents and
            >>> Settings/Dan/Desktop/APRS/APRSIS-CE/OSMTiles/</OSM.Path>
            >>> <OSM.MinMBFree>8</OSM.MinMBFree>
            >>> <OSM.RetainDays>7</OSM.RetainDays>
            >>> <OSM.RetainZoom>5</OSM.RetainZoom>
            >>> <OSM.RevisionHours>0</OSM.RevisionHours>
            >>> <MultiTrack.width>0</MultiTrack.width>
            >>> <MultiTrack.height>0</MultiTrack.height>
            >>> <MultiTrack.Orientation>2</MultiTrack.Orientation>
            >>> <MultiTrack.Percent>50</MultiTrack.Percent>
            >>> <MultiTrack.Zoom>11</MultiTrack.Zoom>
            >>> <MultiTrack.Scale>8.0000</MultiTrack.Scale>
            >>> <WindowPlacement.x>88</WindowPlacement.x>
            >>> <WindowPlacement.y>116</WindowPlacement.y>
            >>> <WindowPlacement.width>960</WindowPlacement.width>
            >>> <WindowPlacement.height>554</WindowPlacement.height>
            >>> <View.ConfirmOnClose>0</View.ConfirmOnClose>
            >>> <View.Metric.Altitude>0</View.Metric.Altitude>
            >>> <View.Metric.Distance>0</View.Metric.Distance>
            >>> <View.Metric.Pressure>0</View.Metric.Pressure>
            >>> <View.Metric.Rainfall>0</View.Metric.Rainfall>
            >>> <View.Metric.Temperature>0</View.Metric.Temperature>
            >>> <View.Metric.Windspeed>0</View.Metric.Windspeed>
            >>> <View.VisibleLabelsMax>50</View.VisibleLabelsMax>
            >>> <View.Altitude>1</View.Altitude>
            >>> <View.Callsign>1</View.Callsign>
            >>> <View.Callsign.NotMe>0</View.Callsign.NotMe>
            >>> <View.Callsign.NotMine>0</View.Callsign.NotMine>
            >>> <View.Speed.Beaconed>1</View.Speed.Beaconed>
            >>> <View.Speed.Calculated>0</View.Speed.Calculated>
            >>> <View.Speed.Averaged>0</View.Speed.Averaged>
            >>> <View.Weather>1</View.Weather>
            >>> <View.ZoomReverse>1</View.ZoomReverse>
            >>> <View.ZoomMin>0</View.ZoomMin>
            >>> <View.ZoomMax>23</View.ZoomMax>
            >>> <View.WheelDelta>4</View.WheelDelta>
            >>> <View.ScrollInternals>1</View.ScrollInternals>
            >>> <Screen.DateSeconds>2367</Screen.DateSeconds>
            >>> <Screen.DateTime>1</Screen.DateTime>
            >>> <Screen.Altitude>1</Screen.Altitude>
            >>> <Screen.GridSquare>1</Screen.GridSquare>
            >>> <Screen.LatLon>1</Screen.LatLon>
            >>> <Screen.Satellites>1</Screen.Satellites>
            >>> <Screen.Tracks>1</Screen.Tracks>
            >>> <Screen.Circle>1</Screen.Circle>
            >>> <Screen.RedDot>1</Screen.RedDot>
            >>> <Screen.CrossHairs>1</Screen.CrossHairs>
            >>> <Screen.CrossHairTime>1000</Screen.CrossHairTime>
            >>> <View.Custom.Primary></View.Custom.Primary>
            >>> <View.Custom.Alternate></View.Custom.Alternate>
            >>> <View.Flight.Primary>'O^</View.Flight.Primary>
            >>> <View.Flight.Alternate>^</View.Flight.Alternate>
            >>> <View.Mobile.Primary>!'<=>()*0CFOPRSUXY[\^abefgjkpsuv</View.Mobile.Primary>
            >>> <View.Mobile.Alternate>>KOS^ksuv</View.Mobile.Alternate>
            >>> <View.Weather.Primary>_W</View.Weather.Primary>
            >>> <View.Weather.Alternate>([*:<@BDEFGHIJTUW_efgptwy{</View.Weather.Alternate>
            >>> <Center.Latitude>52.147551</Center.Latitude>
            >>> <Center.Longitude>-1.447993</Center.Longitude>
            >>> <Preferred.Latitude>0.000000</Preferred.Latitude>
            >>> <Preferred.Longitude>0.000000</Preferred.Longitude>
            >>> <Preferred.Zoom>0</Preferred.Zoom>
            >>> <Preferred.Scale>8.0000</Preferred.Scale>
            >>> <Preferred.Orientation>0</Preferred.Orientation>
            >>> <Tracking.Call>G6MMD-7</Tracking.Call>
            >>> <Tracking.Center>0</Tracking.Center>
            >>> <Tracking.Locked>0</Tracking.Locked>
            >>> <APRSISPort>@...:14578</APRSISPort>
            >>> <GPSPort></GPSPort>
            >>>
            >>>
            >>> <!--RFPort[0]-->
            >>> <RFPort Name="agw">
            >>> <Protocol>AGW</Protocol>
            >>> <Device>@LOCALHOST:8000</Device>
            >>> <RfBaud>1200</RfBaud>
            >>> <!--OpenCmd-->
            >>> <!--CloseCmd-->
            >>> <QuietTime>0</QuietTime>
            >>> <Enabled>0</Enabled>
            >>> <XmitEnabled>1</XmitEnabled>
            >>> <RFtoISEnabled>1</RFtoISEnabled>
            >>> <IStoRFEnabled>1</IStoRFEnabled>
            >>> <MyCallNot3rd>0</MyCallNot3rd>
            >>> <BeaconingEnabled>1</BeaconingEnabled>
            >>> <BeaconPath></BeaconPath>
            >>> <TelemetryEnabled>0</TelemetryEnabled>
            >>> <TelemetryPath></TelemetryPath>
            >>> <!--DigiXform-->
            >>> </RFPort>
            >>> <!--RFPort[0]-->
            >>>
            >>> <!--RFPort[1]-->
            >>> <RFPort Name="d710tes">
            >>> <Protocol>KWD710(Pkt)</Protocol>
            >>> <Device>COM3:19200,N,8,1</Device>
            >>> <RfBaud>1200</RfBaud>
            >>> <OpenCmd>^C^C^C~!!0</OpenCmd>
            >>> <OpenCmd>TC 1!?</OpenCmd>
            >>> <OpenCmd>TC 1!TS 1</OpenCmd>
            >>> <OpenCmd>TN 2,1!TN 2,1</OpenCmd>
            >>> <OpenCmd>^M!cmd:!5</OpenCmd>
            >>> <OpenCmd>DIG ON</OpenCmd>
            >>> <OpenCmd>GB 4800</OpenCmd>
            >>> <OpenCmd>HB 1200</OpenCmd>
            >>> <OpenCmd>GPST $GPRMC</OpenCmd>
            >>> <OpenCmd>LTM 10</OpenCmd>
            >>> <OpenCmd>LTMH OFF</OpenCmd>
            >>> <OpenCmd>LOC E 0</OpenCmd>
            >>> <OpenCmd>M ON</OpenCmd>
            >>> <OpenCmd>MCOM ON</OpenCmd>
            >>> <OpenCmd>MS OFF</OpenCmd>
            >>> <OpenCmd>CONO OFF</OpenCmd>
            >>> <OpenCmd>P 250</OpenCmd>
            >>> <OpenCmd>UI OFF</OpenCmd>
            >>> <OpenCmd>UIF NOID</OpenCmd>
            >>> <OpenCmd>UIT %</OpenCmd>
            >>> <OpenCmd>X OFF</OpenCmd>
            >>> <OpenCmd>HEADER OFF</OpenCmd>
            >>> <OpenCmd>NE ON</OpenCmd>
            >>> <OpenCmd>NO OFF</OpenCmd>
            >>> <OpenCmd>ECHO OFF!cmd:!1.0</OpenCmd>
            >>> <OpenCmd>BEACON EVERY 0!cmd:!1.0</OpenCmd>
            >>> <OpenCmd>ECHO OFF!cmd:!1.00</OpenCmd>
            >>> <OpenCmd>BEACON EVERY 0!cmd:!1.00</OpenCmd>
            >>> <OpenCmd>^C^C^C~!!0</OpenCmd>
            >>> <CloseCmd>^M!cmd:!1</CloseCmd>
            >>> <CloseCmd>LTM 0</CloseCmd>
            >>> <CloseCmd>TC 1!TS 1</CloseCmd>
            >>> <CloseCmd>TN 0,0!TN 0,0</CloseCmd>
            >>> <QuietTime>0</QuietTime>
            >>> <Enabled>1</Enabled>
            >>> <XmitEnabled>1</XmitEnabled>
            >>> <RFtoISEnabled>1</RFtoISEnabled>
            >>> <IStoRFEnabled>1</IStoRFEnabled>
            >>> <MyCallNot3rd>0</MyCallNot3rd>
            >>> <BeaconingEnabled>1</BeaconingEnabled>
            >>> <BeaconPath></BeaconPath>
            >>> <TelemetryEnabled>0</TelemetryEnabled>
            >>> <TelemetryPath></TelemetryPath>
            >>> <!--DigiXform-->
            >>> </RFPort>
            >>> <!--RFPort[1]-->
            >>>
            >>> <DigiXform>WIDE1-1=WIDE1*</DigiXform>
            >>> <DigiXform>WIDE2-1=WIDE2*</DigiXform>
            >>> <DigiXform>WIDE2-2=WIDE2-1</DigiXform>
            >>>
            >>>
            >>>
            >>> On 02/11/2010 12:21, Lynn W Deffenbaugh (Mr) wrote:
            >>>
            >>>
            >>>> Dan Rimell wrote:
            >>>>
            >>>>
            >>>>> Just a few queries with issues I am having. I managed to solve the
            >>>>>
            >>>>>
            >>>> issue
            >>>>
            >>>>
            >>>>> with enabling Band B as the correct TNC Band with trail and error.
            >>>>>
            >>>>>
            >>>>>
            >>>> Can you post your final<RfPort> section, particularly the<OpenCmd>s
            >>>> and<CloseCmd>s? Or confirm that the latest one is the one listed
            >>>> below? When I get to it, I'm hoping to add pages to the Wiki for the
            >>>> various setups.
            >>>>
            >>>>
            >>>>
            >>>>> I did see the topic yesterday regarding mapping, which reminded me of
            >>>>> something I have always had trouble with. Whenever I select the "pre
            >>>>> fetch" option it will cause the software to "pause". By this I mean it
            >>>>> states queued 2804\2975 tiles, and doesnt move forward. There seems to
            >>>>> be no internet activity apart from the APRSIS feed. Wonder if im doing
            >>>>> something wrong.
            >>>>>
            >>>>>
            >>>>>
            >>>> There's a pregnant pause before it throws up the information box that
            >>>> you mention while it tries to figure out how many tiles it needs versus
            >>>> how many tiles are already in the cache. When you clear the
            >>>> confirmation, all of the needed tiles are queued for fetching. There
            >>>> should be a (really tiny at first) yellow circle that will expand out to
            >>>> the range circle as the queue is worked off. This is the tile fetcher
            >>>> progress indicator. You can also double-click any empty map section and
            >>>> see the current state of the tile fetcher queue and threads.
            >>>>
            >>>> If you're using pre-fetch, you'll want to remember to disable the purger
            >>>> (http://aprsisce.wikidot.com/moving-osmtiles) or your tiles will
            >>>> disappear after a while.
            >>>>
            >>>>
            >>>>
            >>>>> DigiXForm - I have got three lines in here which I have added many
            >>>>> months ago, However I am sure they are wrong, as I am not actually
            >>>>> passing any digi traffic. I wonder if anyone can spot a mistake in this
            >>>>> con-fig below. I wonder if any of the Stations based in the UK have
            >>>>> suggestions for best practice, I find reading material for UK APRS
            >>>>> operations rare and hard to find.
            >>>>>
            >>>>>
            >>>>>
            >>>> http://aprsisce.wikidot.com/digipeating is the Wiki page on digipeating
            >>>> and<DigiXForm>. These elements only work OUTSIDE of any RfPort at this
            >>>> time. In some future revision, they'll be port-specific (hence the
            >>>> placeholder), but for now, it's the global set that count. So, if you
            >>>> move your set of three outside of the RfPort and replace the commented
            >>>> one that's outside of that/those element(s), you should start digipeating.
            >>>>
            >>>> As far as I know, the UK and EU has adopted the "new paradigm" WIDEn-N,
            >>>> so your lines look right if you've got a good RF placement and want to
            >>>> run a WIDE2 digi. If you don't have large coverage, and only want to
            >>>> run a WIDE1 fill-in (which is what I run off 20' of my tower), just keep
            >>>> the first line (but I suspect you already understood that part).
            >>>>
            >>>> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
            >>>>
            >>>>
            >>>>
            >>>>> Thanks
            >>>>> Dan
            >>>>> M0MST
            >>>>>
            >>>>> _______
            >>>>>
            >>>>> <!--RFPort[1]-->
            >>>>> <RFPort Name="d710tes">
            >>>>> <Protocol>KWD710(Pkt)</Protocol>
            >>>>> <Device>COM3:19200,N,8,1</Device>
            >>>>> <RfBaud>1200</RfBaud>
            >>>>> <OpenCmd>^C^C^C~!!0</OpenCmd>
            >>>>> <OpenCmd>TC 1!?</OpenCmd>
            >>>>> <OpenCmd>TC 1!TS 1</OpenCmd>
            >>>>> <OpenCmd>TN 2,1!TN 2,1</OpenCmd>
            >>>>> <OpenCmd>^M!cmd:!5</OpenCmd>
            >>>>> <OpenCmd>DIG OFF</OpenCmd>
            >>>>> <OpenCmd>GB 4800</OpenCmd>
            >>>>> <OpenCmd>HB 1200</OpenCmd>
            >>>>> <OpenCmd>GPST $GPRMC</OpenCmd>
            >>>>> <OpenCmd>LTM 10</OpenCmd>
            >>>>> <OpenCmd>LTMH OFF</OpenCmd>
            >>>>> <OpenCmd>LOC E 0</OpenCmd>
            >>>>> <OpenCmd>M ON</OpenCmd>
            >>>>> <OpenCmd>MCOM ON</OpenCmd>
            >>>>> <OpenCmd>MS OFF</OpenCmd>
            >>>>> <OpenCmd>CONO OFF</OpenCmd>
            >>>>> <OpenCmd>P 250</OpenCmd>
            >>>>> <OpenCmd>UI OFF</OpenCmd>
            >>>>> <OpenCmd>UIF NOID</OpenCmd>
            >>>>> <OpenCmd>UIT %</OpenCmd>
            >>>>> <OpenCmd>X OFF</OpenCmd>
            >>>>> <OpenCmd>HEADER OFF</OpenCmd>
            >>>>> <OpenCmd>NE ON</OpenCmd>
            >>>>> <OpenCmd>NO OFF</OpenCmd>
            >>>>> <OpenCmd>ECHO OFF!cmd:!1.0</OpenCmd>
            >>>>> <OpenCmd>BEACON EVERY 0!cmd:!1.0</OpenCmd>
            >>>>> <OpenCmd>ECHO OFF!cmd:!1.00</OpenCmd>
            >>>>> <OpenCmd>BEACON EVERY 0!cmd:!1.00</OpenCmd>
            >>>>> <OpenCmd>^C^C^C~!!0</OpenCmd>
            >>>>> <CloseCmd>^M!cmd:!1</CloseCmd>
            >>>>> <CloseCmd>LTM 0</CloseCmd>
            >>>>> <CloseCmd>TC 1!TS 1</CloseCmd>
            >>>>> <CloseCmd>TN 0,0!TN 0,0</CloseCmd>
            >>>>> <QuietTime>0</QuietTime>
            >>>>> <Enabled>1</Enabled>
            >>>>> <XmitEnabled>1</XmitEnabled>
            >>>>> <RFtoISEnabled>1</RFtoISEnabled>
            >>>>> <IStoRFEnabled>1</IStoRFEnabled>
            >>>>> <MyCallNot3rd>0</MyCallNot3rd>
            >>>>> <BeaconingEnabled>1</BeaconingEnabled>
            >>>>> <BeaconPath></BeaconPath>
            >>>>> <TelemetryEnabled>0</TelemetryEnabled>
            >>>>> <TelemetryPath></TelemetryPath>
            >>>>> <!--DigiXform-->
            >>>>> <DigiXform>WIDE1-1=WIDE1*</DigiXform>
            >>>>> <DigiXform>WIDE2-1=WIDE2*</DigiXform>
            >>>>> <DigiXform>WIDE2-2=WIDE2-1</DigiXform>
            >>>>> </RFPort>
            >>>>> <!--RFPort[1]-->
            >>>>>
            >>>>>
            >>>>>
            >>> ------------------------------------
            >>>
            >>> Yahoo! Groups Links
            >>>
            >>>
            >>>
            >>>
            >>>
            >>>
            >> ------------------------------------
            >>
            >> Yahoo! Groups Links
            >>
            >>
            >>
            >>
            >
            >
            > ------------------------------------
            >
            > Yahoo! Groups Links
            >
            >
            >
            >
            >
          Your message has been successfully submitted and would be delivered to recipients shortly.