Loading ...
Sorry, an error occurred while loading the content.

Re: [aprsisce] PreFetch and DigixForm.

Expand Messages
  • Lynn W Deffenbaugh (Mr)
    ... Can you post your final section, particularly the s and s? Or confirm that the latest one is the one listed below? When I get
    Message 1 of 6 , Nov 2, 2010
    • 0 Attachment
      Dan Rimell wrote:
      > Just a few queries with issues I am having. I managed to solve the issue
      > with enabling Band B as the correct TNC Band with trail and error.
      >

      Can you post your final <RfPort> section, particularly the <OpenCmd>s
      and <CloseCmd>s? Or confirm that the latest one is the one listed
      below? When I get to it, I'm hoping to add pages to the Wiki for the
      various setups.

      > I did see the topic yesterday regarding mapping, which reminded me of
      > something I have always had trouble with. Whenever I select the "pre
      > fetch" option it will cause the software to "pause". By this I mean it
      > states queued 2804\2975 tiles, and doesnt move forward. There seems to
      > be no internet activity apart from the APRSIS feed. Wonder if im doing
      > something wrong.
      >

      There's a pregnant pause before it throws up the information box that
      you mention while it tries to figure out how many tiles it needs versus
      how many tiles are already in the cache. When you clear the
      confirmation, all of the needed tiles are queued for fetching. There
      should be a (really tiny at first) yellow circle that will expand out to
      the range circle as the queue is worked off. This is the tile fetcher
      progress indicator. You can also double-click any empty map section and
      see the current state of the tile fetcher queue and threads.

      If you're using pre-fetch, you'll want to remember to disable the purger
      (http://aprsisce.wikidot.com/moving-osmtiles) or your tiles will
      disappear after a while.

      > DigiXForm - I have got three lines in here which I have added many
      > months ago, However I am sure they are wrong, as I am not actually
      > passing any digi traffic. I wonder if anyone can spot a mistake in this
      > con-fig below. I wonder if any of the Stations based in the UK have
      > suggestions for best practice, I find reading material for UK APRS
      > operations rare and hard to find.
      >

      http://aprsisce.wikidot.com/digipeating is the Wiki page on digipeating
      and <DigiXForm>. These elements only work OUTSIDE of any RfPort at this
      time. In some future revision, they'll be port-specific (hence the
      placeholder), but for now, it's the global set that count. So, if you
      move your set of three outside of the RfPort and replace the commented
      one that's outside of that/those element(s), you should start digipeating.

      As far as I know, the UK and EU has adopted the "new paradigm" WIDEn-N,
      so your lines look right if you've got a good RF placement and want to
      run a WIDE2 digi. If you don't have large coverage, and only want to
      run a WIDE1 fill-in (which is what I run off 20' of my tower), just keep
      the first line (but I suspect you already understood that part).

      Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32


      > Thanks
      > Dan
      > M0MST
      >
      > _______
      >
      > <!--RFPort[1]-->
      > <RFPort Name="d710tes">
      > <Protocol>KWD710(Pkt)</Protocol>
      > <Device>COM3:19200,N,8,1</Device>
      > <RfBaud>1200</RfBaud>
      > <OpenCmd>^C^C^C~!!0</OpenCmd>
      > <OpenCmd>TC 1!?</OpenCmd>
      > <OpenCmd>TC 1!TS 1</OpenCmd>
      > <OpenCmd>TN 2,1!TN 2,1</OpenCmd>
      > <OpenCmd>^M!cmd:!5</OpenCmd>
      > <OpenCmd>DIG OFF</OpenCmd>
      > <OpenCmd>GB 4800</OpenCmd>
      > <OpenCmd>HB 1200</OpenCmd>
      > <OpenCmd>GPST $GPRMC</OpenCmd>
      > <OpenCmd>LTM 10</OpenCmd>
      > <OpenCmd>LTMH OFF</OpenCmd>
      > <OpenCmd>LOC E 0</OpenCmd>
      > <OpenCmd>M ON</OpenCmd>
      > <OpenCmd>MCOM ON</OpenCmd>
      > <OpenCmd>MS OFF</OpenCmd>
      > <OpenCmd>CONO OFF</OpenCmd>
      > <OpenCmd>P 250</OpenCmd>
      > <OpenCmd>UI OFF</OpenCmd>
      > <OpenCmd>UIF NOID</OpenCmd>
      > <OpenCmd>UIT %</OpenCmd>
      > <OpenCmd>X OFF</OpenCmd>
      > <OpenCmd>HEADER OFF</OpenCmd>
      > <OpenCmd>NE ON</OpenCmd>
      > <OpenCmd>NO OFF</OpenCmd>
      > <OpenCmd>ECHO OFF!cmd:!1.0</OpenCmd>
      > <OpenCmd>BEACON EVERY 0!cmd:!1.0</OpenCmd>
      > <OpenCmd>ECHO OFF!cmd:!1.00</OpenCmd>
      > <OpenCmd>BEACON EVERY 0!cmd:!1.00</OpenCmd>
      > <OpenCmd>^C^C^C~!!0</OpenCmd>
      > <CloseCmd>^M!cmd:!1</CloseCmd>
      > <CloseCmd>LTM 0</CloseCmd>
      > <CloseCmd>TC 1!TS 1</CloseCmd>
      > <CloseCmd>TN 0,0!TN 0,0</CloseCmd>
      > <QuietTime>0</QuietTime>
      > <Enabled>1</Enabled>
      > <XmitEnabled>1</XmitEnabled>
      > <RFtoISEnabled>1</RFtoISEnabled>
      > <IStoRFEnabled>1</IStoRFEnabled>
      > <MyCallNot3rd>0</MyCallNot3rd>
      > <BeaconingEnabled>1</BeaconingEnabled>
      > <BeaconPath></BeaconPath>
      > <TelemetryEnabled>0</TelemetryEnabled>
      > <TelemetryPath></TelemetryPath>
      > <!--DigiXform-->
      > <DigiXform>WIDE1-1=WIDE1*</DigiXform>
      > <DigiXform>WIDE2-1=WIDE2*</DigiXform>
      > <DigiXform>WIDE2-2=WIDE2-1</DigiXform>
      > </RFPort>
      > <!--RFPort[1]-->
      >
    • Dan Rimell
      Thanks for Clearing That Up That below was my latest port config, Following your information below I have now changed it , Another copy. All understood
      Message 2 of 6 , Nov 2, 2010
      • 0 Attachment
        Thanks for Clearing That Up

        That below was my latest port config, Following your information below I
        have now changed it , Another copy. All understood regarding the
        prefetch, will try and watch the yellow circle :).

        Below is the latest config, yet to see any digi's as there are no
        mobiles in range of me at the moment

        Thanks
        Dan
        M0MST

        <Enables.APRSIS>1</Enables.APRSIS>
        <Enables.RFPorts>1</Enables.RFPorts>
        <Enables.RFPktLog>1</Enables.RFPktLog>
        <Enables.RFReceiveOnly>0</Enables.RFReceiveOnly>
        <Enables.GPS>0</Enables.GPS>
        <Enables.OSMFetch>1</Enables.OSMFetch>
        <Enables.Sound>0</Enables.Sound>
        <Enables.NotifyOnNewBulletin>0</Enables.NotifyOnNewBulletin>
        <Enables.CSVFile>1</Enables.CSVFile>
        <Enables.AutoSaveGPX>1</Enables.AutoSaveGPX>
        <Enables.Beacons>1</Enables.Beacons>
        <Enables.Telemetry>0</Enables.Telemetry>
        <Enables.AllMessages>0</Enables.AllMessages>
        <Enables.MyMessages>1</Enables.MyMessages>
        <Enables.HideQueries>0</Enables.HideQueries>
        <Enables.NotifyOnQuery>1</Enables.NotifyOnQuery>
        <Enables.NotifyOnNewMessage>1</Enables.NotifyOnNewMessage>
        <Enables.Debug>0</Enables.Debug>
        <Genius.MinTime>10</Genius.MinTime>
        <Genius.MaxTime>30</Genius.MaxTime>
        <Genius.TimeOnly>0</Genius.TimeOnly>
        <Genius.StartStop>1</Genius.StartStop>
        <Genius.BearingChange>30</Genius.BearingChange>
        <Genius.ForecastError>0.10</Genius.ForecastError>
        <Genius.MaxDistance>1.00</Genius.MaxDistance>
        <Symbol.Table>/</Symbol.Table>
        <Symbol.Symbol>#</Symbol.Symbol>
        <Beacon.Timestamp>1</Beacon.Timestamp>
        <Beacon.HHMMSS>1</Beacon.HHMMSS>
        <Beacon.CourseSpeed>1</Beacon.CourseSpeed>
        <Beacon.Altitude>1</Beacon.Altitude>
        <Beacon.Why>1</Beacon.Why>
        <Beacon.Comment>1</Beacon.Comment>
        <Beacon.DAO>0</Beacon.DAO>
        <Status.Enabled>1</Status.Enabled>
        <Status.Interval>10</Status.Interval>
        <Status.Timestamp>1</Status.Timestamp>
        <Status.GridSquare>1</Status.GridSquare>
        <Status.Text>APRSISCE/32 DIGI</Status.Text>
        <Status.Choice>APRSISCE/32 DIGI</Status.Choice>
        <Status.LastSent>2010-11-02T12:49:45</Status.LastSent>
        <Scale>14.5686</Scale>
        <Orientation>2</Orientation>
        <Latitude>52.131434</Latitude>
        <Longitude>-1.789009</Longitude>
        <Altitude>0.0000</Altitude>
        <BeaconPath>RAYNET-1,WIDE1-1,WIDE2-2</BeaconPath>
        <EMailServer>EMAIL-2</EMailServer>
        <WhoIsServer>WHO-IS</WhoIsServer>
        <!--MessageGroup-->
        <OSM.Zoom>10</OSM.Zoom>
        <OSM.Percent>50</OSM.Percent>
        <OSM.Server>tile.openstreetmap.org</OSM.Server>
        <OSM.Port>80</OSM.Port>
        <OSM.URLPrefix>/</OSM.URLPrefix>
        <OSM.Path>C:/Documents and
        Settings/Dan/Desktop/APRS/APRSIS-CE/OSMTiles/</OSM.Path>
        <OSM.MinMBFree>8</OSM.MinMBFree>
        <OSM.RetainDays>7</OSM.RetainDays>
        <OSM.RetainZoom>5</OSM.RetainZoom>
        <OSM.RevisionHours>0</OSM.RevisionHours>
        <MultiTrack.width>0</MultiTrack.width>
        <MultiTrack.height>0</MultiTrack.height>
        <MultiTrack.Orientation>2</MultiTrack.Orientation>
        <MultiTrack.Percent>50</MultiTrack.Percent>
        <MultiTrack.Zoom>11</MultiTrack.Zoom>
        <MultiTrack.Scale>8.0000</MultiTrack.Scale>
        <WindowPlacement.x>88</WindowPlacement.x>
        <WindowPlacement.y>116</WindowPlacement.y>
        <WindowPlacement.width>960</WindowPlacement.width>
        <WindowPlacement.height>554</WindowPlacement.height>
        <View.ConfirmOnClose>0</View.ConfirmOnClose>
        <View.Metric.Altitude>0</View.Metric.Altitude>
        <View.Metric.Distance>0</View.Metric.Distance>
        <View.Metric.Pressure>0</View.Metric.Pressure>
        <View.Metric.Rainfall>0</View.Metric.Rainfall>
        <View.Metric.Temperature>0</View.Metric.Temperature>
        <View.Metric.Windspeed>0</View.Metric.Windspeed>
        <View.VisibleLabelsMax>50</View.VisibleLabelsMax>
        <View.Altitude>1</View.Altitude>
        <View.Callsign>1</View.Callsign>
        <View.Callsign.NotMe>0</View.Callsign.NotMe>
        <View.Callsign.NotMine>0</View.Callsign.NotMine>
        <View.Speed.Beaconed>1</View.Speed.Beaconed>
        <View.Speed.Calculated>0</View.Speed.Calculated>
        <View.Speed.Averaged>0</View.Speed.Averaged>
        <View.Weather>1</View.Weather>
        <View.ZoomReverse>1</View.ZoomReverse>
        <View.ZoomMin>0</View.ZoomMin>
        <View.ZoomMax>23</View.ZoomMax>
        <View.WheelDelta>4</View.WheelDelta>
        <View.ScrollInternals>1</View.ScrollInternals>
        <Screen.DateSeconds>2367</Screen.DateSeconds>
        <Screen.DateTime>1</Screen.DateTime>
        <Screen.Altitude>1</Screen.Altitude>
        <Screen.GridSquare>1</Screen.GridSquare>
        <Screen.LatLon>1</Screen.LatLon>
        <Screen.Satellites>1</Screen.Satellites>
        <Screen.Tracks>1</Screen.Tracks>
        <Screen.Circle>1</Screen.Circle>
        <Screen.RedDot>1</Screen.RedDot>
        <Screen.CrossHairs>1</Screen.CrossHairs>
        <Screen.CrossHairTime>1000</Screen.CrossHairTime>
        <View.Custom.Primary></View.Custom.Primary>
        <View.Custom.Alternate></View.Custom.Alternate>
        <View.Flight.Primary>'O^</View.Flight.Primary>
        <View.Flight.Alternate>^</View.Flight.Alternate>
        <View.Mobile.Primary>!'<=>()*0CFOPRSUXY[\^abefgjkpsuv</View.Mobile.Primary>
        <View.Mobile.Alternate>>KOS^ksuv</View.Mobile.Alternate>
        <View.Weather.Primary>_W</View.Weather.Primary>
        <View.Weather.Alternate>([*:<@BDEFGHIJTUW_efgptwy{</View.Weather.Alternate>
        <Center.Latitude>52.147551</Center.Latitude>
        <Center.Longitude>-1.447993</Center.Longitude>
        <Preferred.Latitude>0.000000</Preferred.Latitude>
        <Preferred.Longitude>0.000000</Preferred.Longitude>
        <Preferred.Zoom>0</Preferred.Zoom>
        <Preferred.Scale>8.0000</Preferred.Scale>
        <Preferred.Orientation>0</Preferred.Orientation>
        <Tracking.Call>G6MMD-7</Tracking.Call>
        <Tracking.Center>0</Tracking.Center>
        <Tracking.Locked>0</Tracking.Locked>
        <APRSISPort>@...:14578</APRSISPort>
        <GPSPort></GPSPort>


        <!--RFPort[0]-->
        <RFPort Name="agw">
        <Protocol>AGW</Protocol>
        <Device>@LOCALHOST:8000</Device>
        <RfBaud>1200</RfBaud>
        <!--OpenCmd-->
        <!--CloseCmd-->
        <QuietTime>0</QuietTime>
        <Enabled>0</Enabled>
        <XmitEnabled>1</XmitEnabled>
        <RFtoISEnabled>1</RFtoISEnabled>
        <IStoRFEnabled>1</IStoRFEnabled>
        <MyCallNot3rd>0</MyCallNot3rd>
        <BeaconingEnabled>1</BeaconingEnabled>
        <BeaconPath></BeaconPath>
        <TelemetryEnabled>0</TelemetryEnabled>
        <TelemetryPath></TelemetryPath>
        <!--DigiXform-->
        </RFPort>
        <!--RFPort[0]-->

        <!--RFPort[1]-->
        <RFPort Name="d710tes">
        <Protocol>KWD710(Pkt)</Protocol>
        <Device>COM3:19200,N,8,1</Device>
        <RfBaud>1200</RfBaud>
        <OpenCmd>^C^C^C~!!0</OpenCmd>
        <OpenCmd>TC 1!?</OpenCmd>
        <OpenCmd>TC 1!TS 1</OpenCmd>
        <OpenCmd>TN 2,1!TN 2,1</OpenCmd>
        <OpenCmd>^M!cmd:!5</OpenCmd>
        <OpenCmd>DIG ON</OpenCmd>
        <OpenCmd>GB 4800</OpenCmd>
        <OpenCmd>HB 1200</OpenCmd>
        <OpenCmd>GPST $GPRMC</OpenCmd>
        <OpenCmd>LTM 10</OpenCmd>
        <OpenCmd>LTMH OFF</OpenCmd>
        <OpenCmd>LOC E 0</OpenCmd>
        <OpenCmd>M ON</OpenCmd>
        <OpenCmd>MCOM ON</OpenCmd>
        <OpenCmd>MS OFF</OpenCmd>
        <OpenCmd>CONO OFF</OpenCmd>
        <OpenCmd>P 250</OpenCmd>
        <OpenCmd>UI OFF</OpenCmd>
        <OpenCmd>UIF NOID</OpenCmd>
        <OpenCmd>UIT %</OpenCmd>
        <OpenCmd>X OFF</OpenCmd>
        <OpenCmd>HEADER OFF</OpenCmd>
        <OpenCmd>NE ON</OpenCmd>
        <OpenCmd>NO OFF</OpenCmd>
        <OpenCmd>ECHO OFF!cmd:!1.0</OpenCmd>
        <OpenCmd>BEACON EVERY 0!cmd:!1.0</OpenCmd>
        <OpenCmd>ECHO OFF!cmd:!1.00</OpenCmd>
        <OpenCmd>BEACON EVERY 0!cmd:!1.00</OpenCmd>
        <OpenCmd>^C^C^C~!!0</OpenCmd>
        <CloseCmd>^M!cmd:!1</CloseCmd>
        <CloseCmd>LTM 0</CloseCmd>
        <CloseCmd>TC 1!TS 1</CloseCmd>
        <CloseCmd>TN 0,0!TN 0,0</CloseCmd>
        <QuietTime>0</QuietTime>
        <Enabled>1</Enabled>
        <XmitEnabled>1</XmitEnabled>
        <RFtoISEnabled>1</RFtoISEnabled>
        <IStoRFEnabled>1</IStoRFEnabled>
        <MyCallNot3rd>0</MyCallNot3rd>
        <BeaconingEnabled>1</BeaconingEnabled>
        <BeaconPath></BeaconPath>
        <TelemetryEnabled>0</TelemetryEnabled>
        <TelemetryPath></TelemetryPath>
        <!--DigiXform-->
        </RFPort>
        <!--RFPort[1]-->

        <DigiXform>WIDE1-1=WIDE1*</DigiXform>
        <DigiXform>WIDE2-1=WIDE2*</DigiXform>
        <DigiXform>WIDE2-2=WIDE2-1</DigiXform>



        On 02/11/2010 12:21, Lynn W Deffenbaugh (Mr) wrote:
        >
        > Dan Rimell wrote:
        > > Just a few queries with issues I am having. I managed to solve the
        > issue
        > > with enabling Band B as the correct TNC Band with trail and error.
        > >
        >
        > Can you post your final <RfPort> section, particularly the <OpenCmd>s
        > and <CloseCmd>s? Or confirm that the latest one is the one listed
        > below? When I get to it, I'm hoping to add pages to the Wiki for the
        > various setups.
        >
        > > I did see the topic yesterday regarding mapping, which reminded me of
        > > something I have always had trouble with. Whenever I select the "pre
        > > fetch" option it will cause the software to "pause". By this I mean it
        > > states queued 2804\2975 tiles, and doesnt move forward. There seems to
        > > be no internet activity apart from the APRSIS feed. Wonder if im doing
        > > something wrong.
        > >
        >
        > There's a pregnant pause before it throws up the information box that
        > you mention while it tries to figure out how many tiles it needs versus
        > how many tiles are already in the cache. When you clear the
        > confirmation, all of the needed tiles are queued for fetching. There
        > should be a (really tiny at first) yellow circle that will expand out to
        > the range circle as the queue is worked off. This is the tile fetcher
        > progress indicator. You can also double-click any empty map section and
        > see the current state of the tile fetcher queue and threads.
        >
        > If you're using pre-fetch, you'll want to remember to disable the purger
        > (http://aprsisce.wikidot.com/moving-osmtiles) or your tiles will
        > disappear after a while.
        >
        > > DigiXForm - I have got three lines in here which I have added many
        > > months ago, However I am sure they are wrong, as I am not actually
        > > passing any digi traffic. I wonder if anyone can spot a mistake in this
        > > con-fig below. I wonder if any of the Stations based in the UK have
        > > suggestions for best practice, I find reading material for UK APRS
        > > operations rare and hard to find.
        > >
        >
        > http://aprsisce.wikidot.com/digipeating is the Wiki page on digipeating
        > and <DigiXForm>. These elements only work OUTSIDE of any RfPort at this
        > time. In some future revision, they'll be port-specific (hence the
        > placeholder), but for now, it's the global set that count. So, if you
        > move your set of three outside of the RfPort and replace the commented
        > one that's outside of that/those element(s), you should start digipeating.
        >
        > As far as I know, the UK and EU has adopted the "new paradigm" WIDEn-N,
        > so your lines look right if you've got a good RF placement and want to
        > run a WIDE2 digi. If you don't have large coverage, and only want to
        > run a WIDE1 fill-in (which is what I run off 20' of my tower), just keep
        > the first line (but I suspect you already understood that part).
        >
        > Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
        >
        > > Thanks
        > > Dan
        > > M0MST
        > >
        > > _______
        > >
        > > <!--RFPort[1]-->
        > > <RFPort Name="d710tes">
        > > <Protocol>KWD710(Pkt)</Protocol>
        > > <Device>COM3:19200,N,8,1</Device>
        > > <RfBaud>1200</RfBaud>
        > > <OpenCmd>^C^C^C~!!0</OpenCmd>
        > > <OpenCmd>TC 1!?</OpenCmd>
        > > <OpenCmd>TC 1!TS 1</OpenCmd>
        > > <OpenCmd>TN 2,1!TN 2,1</OpenCmd>
        > > <OpenCmd>^M!cmd:!5</OpenCmd>
        > > <OpenCmd>DIG OFF</OpenCmd>
        > > <OpenCmd>GB 4800</OpenCmd>
        > > <OpenCmd>HB 1200</OpenCmd>
        > > <OpenCmd>GPST $GPRMC</OpenCmd>
        > > <OpenCmd>LTM 10</OpenCmd>
        > > <OpenCmd>LTMH OFF</OpenCmd>
        > > <OpenCmd>LOC E 0</OpenCmd>
        > > <OpenCmd>M ON</OpenCmd>
        > > <OpenCmd>MCOM ON</OpenCmd>
        > > <OpenCmd>MS OFF</OpenCmd>
        > > <OpenCmd>CONO OFF</OpenCmd>
        > > <OpenCmd>P 250</OpenCmd>
        > > <OpenCmd>UI OFF</OpenCmd>
        > > <OpenCmd>UIF NOID</OpenCmd>
        > > <OpenCmd>UIT %</OpenCmd>
        > > <OpenCmd>X OFF</OpenCmd>
        > > <OpenCmd>HEADER OFF</OpenCmd>
        > > <OpenCmd>NE ON</OpenCmd>
        > > <OpenCmd>NO OFF</OpenCmd>
        > > <OpenCmd>ECHO OFF!cmd:!1.0</OpenCmd>
        > > <OpenCmd>BEACON EVERY 0!cmd:!1.0</OpenCmd>
        > > <OpenCmd>ECHO OFF!cmd:!1.00</OpenCmd>
        > > <OpenCmd>BEACON EVERY 0!cmd:!1.00</OpenCmd>
        > > <OpenCmd>^C^C^C~!!0</OpenCmd>
        > > <CloseCmd>^M!cmd:!1</CloseCmd>
        > > <CloseCmd>LTM 0</CloseCmd>
        > > <CloseCmd>TC 1!TS 1</CloseCmd>
        > > <CloseCmd>TN 0,0!TN 0,0</CloseCmd>
        > > <QuietTime>0</QuietTime>
        > > <Enabled>1</Enabled>
        > > <XmitEnabled>1</XmitEnabled>
        > > <RFtoISEnabled>1</RFtoISEnabled>
        > > <IStoRFEnabled>1</IStoRFEnabled>
        > > <MyCallNot3rd>0</MyCallNot3rd>
        > > <BeaconingEnabled>1</BeaconingEnabled>
        > > <BeaconPath></BeaconPath>
        > > <TelemetryEnabled>0</TelemetryEnabled>
        > > <TelemetryPath></TelemetryPath>
        > > <!--DigiXform-->
        > > <DigiXform>WIDE1-1=WIDE1*</DigiXform>
        > > <DigiXform>WIDE2-1=WIDE2*</DigiXform>
        > > <DigiXform>WIDE2-2=WIDE2-1</DigiXform>
        > > </RFPort>
        > > <!--RFPort[1]-->
        > >
        >
        >
      • Lynn W Deffenbaugh (Mr)
        As a final note, you can Enables / View Logs / Digi and then click Enable in that window s menu. Any Digipeater action (or inaction) will show up there.
        Message 3 of 6 , Nov 2, 2010
        • 0 Attachment
          As a final note, you can Enables / View Logs / Digi and then click
          Enable in that window's menu. Any Digipeater action (or inaction) will
          show up there.

          Thanks for the updated config. Now, if I can manage to not misplace it
          until I get it in the wiki...

          Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

          Dan Rimell wrote:
          > Thanks for Clearing That Up
          >
          > That below was my latest port config, Following your information below I
          > have now changed it , Another copy. All understood regarding the
          > prefetch, will try and watch the yellow circle :).
          >
          > Below is the latest config, yet to see any digi's as there are no
          > mobiles in range of me at the moment
          >
          > Thanks
          > Dan
          > M0MST
          >
          > <Enables.APRSIS>1</Enables.APRSIS>
          > <Enables.RFPorts>1</Enables.RFPorts>
          > <Enables.RFPktLog>1</Enables.RFPktLog>
          > <Enables.RFReceiveOnly>0</Enables.RFReceiveOnly>
          > <Enables.GPS>0</Enables.GPS>
          > <Enables.OSMFetch>1</Enables.OSMFetch>
          > <Enables.Sound>0</Enables.Sound>
          > <Enables.NotifyOnNewBulletin>0</Enables.NotifyOnNewBulletin>
          > <Enables.CSVFile>1</Enables.CSVFile>
          > <Enables.AutoSaveGPX>1</Enables.AutoSaveGPX>
          > <Enables.Beacons>1</Enables.Beacons>
          > <Enables.Telemetry>0</Enables.Telemetry>
          > <Enables.AllMessages>0</Enables.AllMessages>
          > <Enables.MyMessages>1</Enables.MyMessages>
          > <Enables.HideQueries>0</Enables.HideQueries>
          > <Enables.NotifyOnQuery>1</Enables.NotifyOnQuery>
          > <Enables.NotifyOnNewMessage>1</Enables.NotifyOnNewMessage>
          > <Enables.Debug>0</Enables.Debug>
          > <Genius.MinTime>10</Genius.MinTime>
          > <Genius.MaxTime>30</Genius.MaxTime>
          > <Genius.TimeOnly>0</Genius.TimeOnly>
          > <Genius.StartStop>1</Genius.StartStop>
          > <Genius.BearingChange>30</Genius.BearingChange>
          > <Genius.ForecastError>0.10</Genius.ForecastError>
          > <Genius.MaxDistance>1.00</Genius.MaxDistance>
          > <Symbol.Table>/</Symbol.Table>
          > <Symbol.Symbol>#</Symbol.Symbol>
          > <Beacon.Timestamp>1</Beacon.Timestamp>
          > <Beacon.HHMMSS>1</Beacon.HHMMSS>
          > <Beacon.CourseSpeed>1</Beacon.CourseSpeed>
          > <Beacon.Altitude>1</Beacon.Altitude>
          > <Beacon.Why>1</Beacon.Why>
          > <Beacon.Comment>1</Beacon.Comment>
          > <Beacon.DAO>0</Beacon.DAO>
          > <Status.Enabled>1</Status.Enabled>
          > <Status.Interval>10</Status.Interval>
          > <Status.Timestamp>1</Status.Timestamp>
          > <Status.GridSquare>1</Status.GridSquare>
          > <Status.Text>APRSISCE/32 DIGI</Status.Text>
          > <Status.Choice>APRSISCE/32 DIGI</Status.Choice>
          > <Status.LastSent>2010-11-02T12:49:45</Status.LastSent>
          > <Scale>14.5686</Scale>
          > <Orientation>2</Orientation>
          > <Latitude>52.131434</Latitude>
          > <Longitude>-1.789009</Longitude>
          > <Altitude>0.0000</Altitude>
          > <BeaconPath>RAYNET-1,WIDE1-1,WIDE2-2</BeaconPath>
          > <EMailServer>EMAIL-2</EMailServer>
          > <WhoIsServer>WHO-IS</WhoIsServer>
          > <!--MessageGroup-->
          > <OSM.Zoom>10</OSM.Zoom>
          > <OSM.Percent>50</OSM.Percent>
          > <OSM.Server>tile.openstreetmap.org</OSM.Server>
          > <OSM.Port>80</OSM.Port>
          > <OSM.URLPrefix>/</OSM.URLPrefix>
          > <OSM.Path>C:/Documents and
          > Settings/Dan/Desktop/APRS/APRSIS-CE/OSMTiles/</OSM.Path>
          > <OSM.MinMBFree>8</OSM.MinMBFree>
          > <OSM.RetainDays>7</OSM.RetainDays>
          > <OSM.RetainZoom>5</OSM.RetainZoom>
          > <OSM.RevisionHours>0</OSM.RevisionHours>
          > <MultiTrack.width>0</MultiTrack.width>
          > <MultiTrack.height>0</MultiTrack.height>
          > <MultiTrack.Orientation>2</MultiTrack.Orientation>
          > <MultiTrack.Percent>50</MultiTrack.Percent>
          > <MultiTrack.Zoom>11</MultiTrack.Zoom>
          > <MultiTrack.Scale>8.0000</MultiTrack.Scale>
          > <WindowPlacement.x>88</WindowPlacement.x>
          > <WindowPlacement.y>116</WindowPlacement.y>
          > <WindowPlacement.width>960</WindowPlacement.width>
          > <WindowPlacement.height>554</WindowPlacement.height>
          > <View.ConfirmOnClose>0</View.ConfirmOnClose>
          > <View.Metric.Altitude>0</View.Metric.Altitude>
          > <View.Metric.Distance>0</View.Metric.Distance>
          > <View.Metric.Pressure>0</View.Metric.Pressure>
          > <View.Metric.Rainfall>0</View.Metric.Rainfall>
          > <View.Metric.Temperature>0</View.Metric.Temperature>
          > <View.Metric.Windspeed>0</View.Metric.Windspeed>
          > <View.VisibleLabelsMax>50</View.VisibleLabelsMax>
          > <View.Altitude>1</View.Altitude>
          > <View.Callsign>1</View.Callsign>
          > <View.Callsign.NotMe>0</View.Callsign.NotMe>
          > <View.Callsign.NotMine>0</View.Callsign.NotMine>
          > <View.Speed.Beaconed>1</View.Speed.Beaconed>
          > <View.Speed.Calculated>0</View.Speed.Calculated>
          > <View.Speed.Averaged>0</View.Speed.Averaged>
          > <View.Weather>1</View.Weather>
          > <View.ZoomReverse>1</View.ZoomReverse>
          > <View.ZoomMin>0</View.ZoomMin>
          > <View.ZoomMax>23</View.ZoomMax>
          > <View.WheelDelta>4</View.WheelDelta>
          > <View.ScrollInternals>1</View.ScrollInternals>
          > <Screen.DateSeconds>2367</Screen.DateSeconds>
          > <Screen.DateTime>1</Screen.DateTime>
          > <Screen.Altitude>1</Screen.Altitude>
          > <Screen.GridSquare>1</Screen.GridSquare>
          > <Screen.LatLon>1</Screen.LatLon>
          > <Screen.Satellites>1</Screen.Satellites>
          > <Screen.Tracks>1</Screen.Tracks>
          > <Screen.Circle>1</Screen.Circle>
          > <Screen.RedDot>1</Screen.RedDot>
          > <Screen.CrossHairs>1</Screen.CrossHairs>
          > <Screen.CrossHairTime>1000</Screen.CrossHairTime>
          > <View.Custom.Primary></View.Custom.Primary>
          > <View.Custom.Alternate></View.Custom.Alternate>
          > <View.Flight.Primary>'O^</View.Flight.Primary>
          > <View.Flight.Alternate>^</View.Flight.Alternate>
          > <View.Mobile.Primary>!'<=>()*0CFOPRSUXY[\^abefgjkpsuv</View.Mobile.Primary>
          > <View.Mobile.Alternate>>KOS^ksuv</View.Mobile.Alternate>
          > <View.Weather.Primary>_W</View.Weather.Primary>
          > <View.Weather.Alternate>([*:<@BDEFGHIJTUW_efgptwy{</View.Weather.Alternate>
          > <Center.Latitude>52.147551</Center.Latitude>
          > <Center.Longitude>-1.447993</Center.Longitude>
          > <Preferred.Latitude>0.000000</Preferred.Latitude>
          > <Preferred.Longitude>0.000000</Preferred.Longitude>
          > <Preferred.Zoom>0</Preferred.Zoom>
          > <Preferred.Scale>8.0000</Preferred.Scale>
          > <Preferred.Orientation>0</Preferred.Orientation>
          > <Tracking.Call>G6MMD-7</Tracking.Call>
          > <Tracking.Center>0</Tracking.Center>
          > <Tracking.Locked>0</Tracking.Locked>
          > <APRSISPort>@...:14578</APRSISPort>
          > <GPSPort></GPSPort>
          >
          >
          > <!--RFPort[0]-->
          > <RFPort Name="agw">
          > <Protocol>AGW</Protocol>
          > <Device>@LOCALHOST:8000</Device>
          > <RfBaud>1200</RfBaud>
          > <!--OpenCmd-->
          > <!--CloseCmd-->
          > <QuietTime>0</QuietTime>
          > <Enabled>0</Enabled>
          > <XmitEnabled>1</XmitEnabled>
          > <RFtoISEnabled>1</RFtoISEnabled>
          > <IStoRFEnabled>1</IStoRFEnabled>
          > <MyCallNot3rd>0</MyCallNot3rd>
          > <BeaconingEnabled>1</BeaconingEnabled>
          > <BeaconPath></BeaconPath>
          > <TelemetryEnabled>0</TelemetryEnabled>
          > <TelemetryPath></TelemetryPath>
          > <!--DigiXform-->
          > </RFPort>
          > <!--RFPort[0]-->
          >
          > <!--RFPort[1]-->
          > <RFPort Name="d710tes">
          > <Protocol>KWD710(Pkt)</Protocol>
          > <Device>COM3:19200,N,8,1</Device>
          > <RfBaud>1200</RfBaud>
          > <OpenCmd>^C^C^C~!!0</OpenCmd>
          > <OpenCmd>TC 1!?</OpenCmd>
          > <OpenCmd>TC 1!TS 1</OpenCmd>
          > <OpenCmd>TN 2,1!TN 2,1</OpenCmd>
          > <OpenCmd>^M!cmd:!5</OpenCmd>
          > <OpenCmd>DIG ON</OpenCmd>
          > <OpenCmd>GB 4800</OpenCmd>
          > <OpenCmd>HB 1200</OpenCmd>
          > <OpenCmd>GPST $GPRMC</OpenCmd>
          > <OpenCmd>LTM 10</OpenCmd>
          > <OpenCmd>LTMH OFF</OpenCmd>
          > <OpenCmd>LOC E 0</OpenCmd>
          > <OpenCmd>M ON</OpenCmd>
          > <OpenCmd>MCOM ON</OpenCmd>
          > <OpenCmd>MS OFF</OpenCmd>
          > <OpenCmd>CONO OFF</OpenCmd>
          > <OpenCmd>P 250</OpenCmd>
          > <OpenCmd>UI OFF</OpenCmd>
          > <OpenCmd>UIF NOID</OpenCmd>
          > <OpenCmd>UIT %</OpenCmd>
          > <OpenCmd>X OFF</OpenCmd>
          > <OpenCmd>HEADER OFF</OpenCmd>
          > <OpenCmd>NE ON</OpenCmd>
          > <OpenCmd>NO OFF</OpenCmd>
          > <OpenCmd>ECHO OFF!cmd:!1.0</OpenCmd>
          > <OpenCmd>BEACON EVERY 0!cmd:!1.0</OpenCmd>
          > <OpenCmd>ECHO OFF!cmd:!1.00</OpenCmd>
          > <OpenCmd>BEACON EVERY 0!cmd:!1.00</OpenCmd>
          > <OpenCmd>^C^C^C~!!0</OpenCmd>
          > <CloseCmd>^M!cmd:!1</CloseCmd>
          > <CloseCmd>LTM 0</CloseCmd>
          > <CloseCmd>TC 1!TS 1</CloseCmd>
          > <CloseCmd>TN 0,0!TN 0,0</CloseCmd>
          > <QuietTime>0</QuietTime>
          > <Enabled>1</Enabled>
          > <XmitEnabled>1</XmitEnabled>
          > <RFtoISEnabled>1</RFtoISEnabled>
          > <IStoRFEnabled>1</IStoRFEnabled>
          > <MyCallNot3rd>0</MyCallNot3rd>
          > <BeaconingEnabled>1</BeaconingEnabled>
          > <BeaconPath></BeaconPath>
          > <TelemetryEnabled>0</TelemetryEnabled>
          > <TelemetryPath></TelemetryPath>
          > <!--DigiXform-->
          > </RFPort>
          > <!--RFPort[1]-->
          >
          > <DigiXform>WIDE1-1=WIDE1*</DigiXform>
          > <DigiXform>WIDE2-1=WIDE2*</DigiXform>
          > <DigiXform>WIDE2-2=WIDE2-1</DigiXform>
          >
          >
          >
          > On 02/11/2010 12:21, Lynn W Deffenbaugh (Mr) wrote:
          >
          >> Dan Rimell wrote:
          >>
          >>> Just a few queries with issues I am having. I managed to solve the
          >>>
          >> issue
          >>
          >>> with enabling Band B as the correct TNC Band with trail and error.
          >>>
          >>>
          >> Can you post your final <RfPort> section, particularly the <OpenCmd>s
          >> and <CloseCmd>s? Or confirm that the latest one is the one listed
          >> below? When I get to it, I'm hoping to add pages to the Wiki for the
          >> various setups.
          >>
          >>
          >>> I did see the topic yesterday regarding mapping, which reminded me of
          >>> something I have always had trouble with. Whenever I select the "pre
          >>> fetch" option it will cause the software to "pause". By this I mean it
          >>> states queued 2804\2975 tiles, and doesnt move forward. There seems to
          >>> be no internet activity apart from the APRSIS feed. Wonder if im doing
          >>> something wrong.
          >>>
          >>>
          >> There's a pregnant pause before it throws up the information box that
          >> you mention while it tries to figure out how many tiles it needs versus
          >> how many tiles are already in the cache. When you clear the
          >> confirmation, all of the needed tiles are queued for fetching. There
          >> should be a (really tiny at first) yellow circle that will expand out to
          >> the range circle as the queue is worked off. This is the tile fetcher
          >> progress indicator. You can also double-click any empty map section and
          >> see the current state of the tile fetcher queue and threads.
          >>
          >> If you're using pre-fetch, you'll want to remember to disable the purger
          >> (http://aprsisce.wikidot.com/moving-osmtiles) or your tiles will
          >> disappear after a while.
          >>
          >>
          >>> DigiXForm - I have got three lines in here which I have added many
          >>> months ago, However I am sure they are wrong, as I am not actually
          >>> passing any digi traffic. I wonder if anyone can spot a mistake in this
          >>> con-fig below. I wonder if any of the Stations based in the UK have
          >>> suggestions for best practice, I find reading material for UK APRS
          >>> operations rare and hard to find.
          >>>
          >>>
          >> http://aprsisce.wikidot.com/digipeating is the Wiki page on digipeating
          >> and <DigiXForm>. These elements only work OUTSIDE of any RfPort at this
          >> time. In some future revision, they'll be port-specific (hence the
          >> placeholder), but for now, it's the global set that count. So, if you
          >> move your set of three outside of the RfPort and replace the commented
          >> one that's outside of that/those element(s), you should start digipeating.
          >>
          >> As far as I know, the UK and EU has adopted the "new paradigm" WIDEn-N,
          >> so your lines look right if you've got a good RF placement and want to
          >> run a WIDE2 digi. If you don't have large coverage, and only want to
          >> run a WIDE1 fill-in (which is what I run off 20' of my tower), just keep
          >> the first line (but I suspect you already understood that part).
          >>
          >> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
          >>
          >>
          >>> Thanks
          >>> Dan
          >>> M0MST
          >>>
          >>> _______
          >>>
          >>> <!--RFPort[1]-->
          >>> <RFPort Name="d710tes">
          >>> <Protocol>KWD710(Pkt)</Protocol>
          >>> <Device>COM3:19200,N,8,1</Device>
          >>> <RfBaud>1200</RfBaud>
          >>> <OpenCmd>^C^C^C~!!0</OpenCmd>
          >>> <OpenCmd>TC 1!?</OpenCmd>
          >>> <OpenCmd>TC 1!TS 1</OpenCmd>
          >>> <OpenCmd>TN 2,1!TN 2,1</OpenCmd>
          >>> <OpenCmd>^M!cmd:!5</OpenCmd>
          >>> <OpenCmd>DIG OFF</OpenCmd>
          >>> <OpenCmd>GB 4800</OpenCmd>
          >>> <OpenCmd>HB 1200</OpenCmd>
          >>> <OpenCmd>GPST $GPRMC</OpenCmd>
          >>> <OpenCmd>LTM 10</OpenCmd>
          >>> <OpenCmd>LTMH OFF</OpenCmd>
          >>> <OpenCmd>LOC E 0</OpenCmd>
          >>> <OpenCmd>M ON</OpenCmd>
          >>> <OpenCmd>MCOM ON</OpenCmd>
          >>> <OpenCmd>MS OFF</OpenCmd>
          >>> <OpenCmd>CONO OFF</OpenCmd>
          >>> <OpenCmd>P 250</OpenCmd>
          >>> <OpenCmd>UI OFF</OpenCmd>
          >>> <OpenCmd>UIF NOID</OpenCmd>
          >>> <OpenCmd>UIT %</OpenCmd>
          >>> <OpenCmd>X OFF</OpenCmd>
          >>> <OpenCmd>HEADER OFF</OpenCmd>
          >>> <OpenCmd>NE ON</OpenCmd>
          >>> <OpenCmd>NO OFF</OpenCmd>
          >>> <OpenCmd>ECHO OFF!cmd:!1.0</OpenCmd>
          >>> <OpenCmd>BEACON EVERY 0!cmd:!1.0</OpenCmd>
          >>> <OpenCmd>ECHO OFF!cmd:!1.00</OpenCmd>
          >>> <OpenCmd>BEACON EVERY 0!cmd:!1.00</OpenCmd>
          >>> <OpenCmd>^C^C^C~!!0</OpenCmd>
          >>> <CloseCmd>^M!cmd:!1</CloseCmd>
          >>> <CloseCmd>LTM 0</CloseCmd>
          >>> <CloseCmd>TC 1!TS 1</CloseCmd>
          >>> <CloseCmd>TN 0,0!TN 0,0</CloseCmd>
          >>> <QuietTime>0</QuietTime>
          >>> <Enabled>1</Enabled>
          >>> <XmitEnabled>1</XmitEnabled>
          >>> <RFtoISEnabled>1</RFtoISEnabled>
          >>> <IStoRFEnabled>1</IStoRFEnabled>
          >>> <MyCallNot3rd>0</MyCallNot3rd>
          >>> <BeaconingEnabled>1</BeaconingEnabled>
          >>> <BeaconPath></BeaconPath>
          >>> <TelemetryEnabled>0</TelemetryEnabled>
          >>> <TelemetryPath></TelemetryPath>
          >>> <!--DigiXform-->
          >>> <DigiXform>WIDE1-1=WIDE1*</DigiXform>
          >>> <DigiXform>WIDE2-1=WIDE2*</DigiXform>
          >>> <DigiXform>WIDE2-2=WIDE2-1</DigiXform>
          >>> </RFPort>
          >>> <!--RFPort[1]-->
          >>>
          >>>
          >>
          >
          >
          > ------------------------------------
          >
          > Yahoo! Groups Links
          >
          >
          >
          >
          >
        • Dan Rimell
          Thats excellent, Ill email you the config off group. Looking at the digi log it is working. Thanks Dan
          Message 4 of 6 , Nov 2, 2010
          • 0 Attachment
            Thats excellent, Ill email you the config off group. Looking at the digi
            log it is working.

            Thanks
            Dan

            On 02/11/2010 13:06, Lynn W Deffenbaugh (Mr) wrote:
            > As a final note, you can Enables / View Logs / Digi and then click
            > Enable in that window's menu. Any Digipeater action (or inaction) will
            > show up there.
            >
            > Thanks for the updated config. Now, if I can manage to not misplace it
            > until I get it in the wiki...
            >
            > Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
            >
            > Dan Rimell wrote:
            >> Thanks for Clearing That Up
            >>
            >> That below was my latest port config, Following your information below I
            >> have now changed it , Another copy. All understood regarding the
            >> prefetch, will try and watch the yellow circle :).
            >>
            >> Below is the latest config, yet to see any digi's as there are no
            >> mobiles in range of me at the moment
            >>
            >> Thanks
            >> Dan
            >> M0MST
            >>
            >> <Enables.APRSIS>1</Enables.APRSIS>
            >> <Enables.RFPorts>1</Enables.RFPorts>
            >> <Enables.RFPktLog>1</Enables.RFPktLog>
            >> <Enables.RFReceiveOnly>0</Enables.RFReceiveOnly>
            >> <Enables.GPS>0</Enables.GPS>
            >> <Enables.OSMFetch>1</Enables.OSMFetch>
            >> <Enables.Sound>0</Enables.Sound>
            >> <Enables.NotifyOnNewBulletin>0</Enables.NotifyOnNewBulletin>
            >> <Enables.CSVFile>1</Enables.CSVFile>
            >> <Enables.AutoSaveGPX>1</Enables.AutoSaveGPX>
            >> <Enables.Beacons>1</Enables.Beacons>
            >> <Enables.Telemetry>0</Enables.Telemetry>
            >> <Enables.AllMessages>0</Enables.AllMessages>
            >> <Enables.MyMessages>1</Enables.MyMessages>
            >> <Enables.HideQueries>0</Enables.HideQueries>
            >> <Enables.NotifyOnQuery>1</Enables.NotifyOnQuery>
            >> <Enables.NotifyOnNewMessage>1</Enables.NotifyOnNewMessage>
            >> <Enables.Debug>0</Enables.Debug>
            >> <Genius.MinTime>10</Genius.MinTime>
            >> <Genius.MaxTime>30</Genius.MaxTime>
            >> <Genius.TimeOnly>0</Genius.TimeOnly>
            >> <Genius.StartStop>1</Genius.StartStop>
            >> <Genius.BearingChange>30</Genius.BearingChange>
            >> <Genius.ForecastError>0.10</Genius.ForecastError>
            >> <Genius.MaxDistance>1.00</Genius.MaxDistance>
            >> <Symbol.Table>/</Symbol.Table>
            >> <Symbol.Symbol>#</Symbol.Symbol>
            >> <Beacon.Timestamp>1</Beacon.Timestamp>
            >> <Beacon.HHMMSS>1</Beacon.HHMMSS>
            >> <Beacon.CourseSpeed>1</Beacon.CourseSpeed>
            >> <Beacon.Altitude>1</Beacon.Altitude>
            >> <Beacon.Why>1</Beacon.Why>
            >> <Beacon.Comment>1</Beacon.Comment>
            >> <Beacon.DAO>0</Beacon.DAO>
            >> <Status.Enabled>1</Status.Enabled>
            >> <Status.Interval>10</Status.Interval>
            >> <Status.Timestamp>1</Status.Timestamp>
            >> <Status.GridSquare>1</Status.GridSquare>
            >> <Status.Text>APRSISCE/32 DIGI</Status.Text>
            >> <Status.Choice>APRSISCE/32 DIGI</Status.Choice>
            >> <Status.LastSent>2010-11-02T12:49:45</Status.LastSent>
            >> <Scale>14.5686</Scale>
            >> <Orientation>2</Orientation>
            >> <Latitude>52.131434</Latitude>
            >> <Longitude>-1.789009</Longitude>
            >> <Altitude>0.0000</Altitude>
            >> <BeaconPath>RAYNET-1,WIDE1-1,WIDE2-2</BeaconPath>
            >> <EMailServer>EMAIL-2</EMailServer>
            >> <WhoIsServer>WHO-IS</WhoIsServer>
            >> <!--MessageGroup-->
            >> <OSM.Zoom>10</OSM.Zoom>
            >> <OSM.Percent>50</OSM.Percent>
            >> <OSM.Server>tile.openstreetmap.org</OSM.Server>
            >> <OSM.Port>80</OSM.Port>
            >> <OSM.URLPrefix>/</OSM.URLPrefix>
            >> <OSM.Path>C:/Documents and
            >> Settings/Dan/Desktop/APRS/APRSIS-CE/OSMTiles/</OSM.Path>
            >> <OSM.MinMBFree>8</OSM.MinMBFree>
            >> <OSM.RetainDays>7</OSM.RetainDays>
            >> <OSM.RetainZoom>5</OSM.RetainZoom>
            >> <OSM.RevisionHours>0</OSM.RevisionHours>
            >> <MultiTrack.width>0</MultiTrack.width>
            >> <MultiTrack.height>0</MultiTrack.height>
            >> <MultiTrack.Orientation>2</MultiTrack.Orientation>
            >> <MultiTrack.Percent>50</MultiTrack.Percent>
            >> <MultiTrack.Zoom>11</MultiTrack.Zoom>
            >> <MultiTrack.Scale>8.0000</MultiTrack.Scale>
            >> <WindowPlacement.x>88</WindowPlacement.x>
            >> <WindowPlacement.y>116</WindowPlacement.y>
            >> <WindowPlacement.width>960</WindowPlacement.width>
            >> <WindowPlacement.height>554</WindowPlacement.height>
            >> <View.ConfirmOnClose>0</View.ConfirmOnClose>
            >> <View.Metric.Altitude>0</View.Metric.Altitude>
            >> <View.Metric.Distance>0</View.Metric.Distance>
            >> <View.Metric.Pressure>0</View.Metric.Pressure>
            >> <View.Metric.Rainfall>0</View.Metric.Rainfall>
            >> <View.Metric.Temperature>0</View.Metric.Temperature>
            >> <View.Metric.Windspeed>0</View.Metric.Windspeed>
            >> <View.VisibleLabelsMax>50</View.VisibleLabelsMax>
            >> <View.Altitude>1</View.Altitude>
            >> <View.Callsign>1</View.Callsign>
            >> <View.Callsign.NotMe>0</View.Callsign.NotMe>
            >> <View.Callsign.NotMine>0</View.Callsign.NotMine>
            >> <View.Speed.Beaconed>1</View.Speed.Beaconed>
            >> <View.Speed.Calculated>0</View.Speed.Calculated>
            >> <View.Speed.Averaged>0</View.Speed.Averaged>
            >> <View.Weather>1</View.Weather>
            >> <View.ZoomReverse>1</View.ZoomReverse>
            >> <View.ZoomMin>0</View.ZoomMin>
            >> <View.ZoomMax>23</View.ZoomMax>
            >> <View.WheelDelta>4</View.WheelDelta>
            >> <View.ScrollInternals>1</View.ScrollInternals>
            >> <Screen.DateSeconds>2367</Screen.DateSeconds>
            >> <Screen.DateTime>1</Screen.DateTime>
            >> <Screen.Altitude>1</Screen.Altitude>
            >> <Screen.GridSquare>1</Screen.GridSquare>
            >> <Screen.LatLon>1</Screen.LatLon>
            >> <Screen.Satellites>1</Screen.Satellites>
            >> <Screen.Tracks>1</Screen.Tracks>
            >> <Screen.Circle>1</Screen.Circle>
            >> <Screen.RedDot>1</Screen.RedDot>
            >> <Screen.CrossHairs>1</Screen.CrossHairs>
            >> <Screen.CrossHairTime>1000</Screen.CrossHairTime>
            >> <View.Custom.Primary></View.Custom.Primary>
            >> <View.Custom.Alternate></View.Custom.Alternate>
            >> <View.Flight.Primary>'O^</View.Flight.Primary>
            >> <View.Flight.Alternate>^</View.Flight.Alternate>
            >> <View.Mobile.Primary>!'<=>()*0CFOPRSUXY[\^abefgjkpsuv</View.Mobile.Primary>
            >> <View.Mobile.Alternate>>KOS^ksuv</View.Mobile.Alternate>
            >> <View.Weather.Primary>_W</View.Weather.Primary>
            >> <View.Weather.Alternate>([*:<@BDEFGHIJTUW_efgptwy{</View.Weather.Alternate>
            >> <Center.Latitude>52.147551</Center.Latitude>
            >> <Center.Longitude>-1.447993</Center.Longitude>
            >> <Preferred.Latitude>0.000000</Preferred.Latitude>
            >> <Preferred.Longitude>0.000000</Preferred.Longitude>
            >> <Preferred.Zoom>0</Preferred.Zoom>
            >> <Preferred.Scale>8.0000</Preferred.Scale>
            >> <Preferred.Orientation>0</Preferred.Orientation>
            >> <Tracking.Call>G6MMD-7</Tracking.Call>
            >> <Tracking.Center>0</Tracking.Center>
            >> <Tracking.Locked>0</Tracking.Locked>
            >> <APRSISPort>@...:14578</APRSISPort>
            >> <GPSPort></GPSPort>
            >>
            >>
            >> <!--RFPort[0]-->
            >> <RFPort Name="agw">
            >> <Protocol>AGW</Protocol>
            >> <Device>@LOCALHOST:8000</Device>
            >> <RfBaud>1200</RfBaud>
            >> <!--OpenCmd-->
            >> <!--CloseCmd-->
            >> <QuietTime>0</QuietTime>
            >> <Enabled>0</Enabled>
            >> <XmitEnabled>1</XmitEnabled>
            >> <RFtoISEnabled>1</RFtoISEnabled>
            >> <IStoRFEnabled>1</IStoRFEnabled>
            >> <MyCallNot3rd>0</MyCallNot3rd>
            >> <BeaconingEnabled>1</BeaconingEnabled>
            >> <BeaconPath></BeaconPath>
            >> <TelemetryEnabled>0</TelemetryEnabled>
            >> <TelemetryPath></TelemetryPath>
            >> <!--DigiXform-->
            >> </RFPort>
            >> <!--RFPort[0]-->
            >>
            >> <!--RFPort[1]-->
            >> <RFPort Name="d710tes">
            >> <Protocol>KWD710(Pkt)</Protocol>
            >> <Device>COM3:19200,N,8,1</Device>
            >> <RfBaud>1200</RfBaud>
            >> <OpenCmd>^C^C^C~!!0</OpenCmd>
            >> <OpenCmd>TC 1!?</OpenCmd>
            >> <OpenCmd>TC 1!TS 1</OpenCmd>
            >> <OpenCmd>TN 2,1!TN 2,1</OpenCmd>
            >> <OpenCmd>^M!cmd:!5</OpenCmd>
            >> <OpenCmd>DIG ON</OpenCmd>
            >> <OpenCmd>GB 4800</OpenCmd>
            >> <OpenCmd>HB 1200</OpenCmd>
            >> <OpenCmd>GPST $GPRMC</OpenCmd>
            >> <OpenCmd>LTM 10</OpenCmd>
            >> <OpenCmd>LTMH OFF</OpenCmd>
            >> <OpenCmd>LOC E 0</OpenCmd>
            >> <OpenCmd>M ON</OpenCmd>
            >> <OpenCmd>MCOM ON</OpenCmd>
            >> <OpenCmd>MS OFF</OpenCmd>
            >> <OpenCmd>CONO OFF</OpenCmd>
            >> <OpenCmd>P 250</OpenCmd>
            >> <OpenCmd>UI OFF</OpenCmd>
            >> <OpenCmd>UIF NOID</OpenCmd>
            >> <OpenCmd>UIT %</OpenCmd>
            >> <OpenCmd>X OFF</OpenCmd>
            >> <OpenCmd>HEADER OFF</OpenCmd>
            >> <OpenCmd>NE ON</OpenCmd>
            >> <OpenCmd>NO OFF</OpenCmd>
            >> <OpenCmd>ECHO OFF!cmd:!1.0</OpenCmd>
            >> <OpenCmd>BEACON EVERY 0!cmd:!1.0</OpenCmd>
            >> <OpenCmd>ECHO OFF!cmd:!1.00</OpenCmd>
            >> <OpenCmd>BEACON EVERY 0!cmd:!1.00</OpenCmd>
            >> <OpenCmd>^C^C^C~!!0</OpenCmd>
            >> <CloseCmd>^M!cmd:!1</CloseCmd>
            >> <CloseCmd>LTM 0</CloseCmd>
            >> <CloseCmd>TC 1!TS 1</CloseCmd>
            >> <CloseCmd>TN 0,0!TN 0,0</CloseCmd>
            >> <QuietTime>0</QuietTime>
            >> <Enabled>1</Enabled>
            >> <XmitEnabled>1</XmitEnabled>
            >> <RFtoISEnabled>1</RFtoISEnabled>
            >> <IStoRFEnabled>1</IStoRFEnabled>
            >> <MyCallNot3rd>0</MyCallNot3rd>
            >> <BeaconingEnabled>1</BeaconingEnabled>
            >> <BeaconPath></BeaconPath>
            >> <TelemetryEnabled>0</TelemetryEnabled>
            >> <TelemetryPath></TelemetryPath>
            >> <!--DigiXform-->
            >> </RFPort>
            >> <!--RFPort[1]-->
            >>
            >> <DigiXform>WIDE1-1=WIDE1*</DigiXform>
            >> <DigiXform>WIDE2-1=WIDE2*</DigiXform>
            >> <DigiXform>WIDE2-2=WIDE2-1</DigiXform>
            >>
            >>
            >>
            >> On 02/11/2010 12:21, Lynn W Deffenbaugh (Mr) wrote:
            >>
            >>> Dan Rimell wrote:
            >>>
            >>>> Just a few queries with issues I am having. I managed to solve the
            >>>>
            >>> issue
            >>>
            >>>> with enabling Band B as the correct TNC Band with trail and error.
            >>>>
            >>>>
            >>> Can you post your final<RfPort> section, particularly the<OpenCmd>s
            >>> and<CloseCmd>s? Or confirm that the latest one is the one listed
            >>> below? When I get to it, I'm hoping to add pages to the Wiki for the
            >>> various setups.
            >>>
            >>>
            >>>> I did see the topic yesterday regarding mapping, which reminded me of
            >>>> something I have always had trouble with. Whenever I select the "pre
            >>>> fetch" option it will cause the software to "pause". By this I mean it
            >>>> states queued 2804\2975 tiles, and doesnt move forward. There seems to
            >>>> be no internet activity apart from the APRSIS feed. Wonder if im doing
            >>>> something wrong.
            >>>>
            >>>>
            >>> There's a pregnant pause before it throws up the information box that
            >>> you mention while it tries to figure out how many tiles it needs versus
            >>> how many tiles are already in the cache. When you clear the
            >>> confirmation, all of the needed tiles are queued for fetching. There
            >>> should be a (really tiny at first) yellow circle that will expand out to
            >>> the range circle as the queue is worked off. This is the tile fetcher
            >>> progress indicator. You can also double-click any empty map section and
            >>> see the current state of the tile fetcher queue and threads.
            >>>
            >>> If you're using pre-fetch, you'll want to remember to disable the purger
            >>> (http://aprsisce.wikidot.com/moving-osmtiles) or your tiles will
            >>> disappear after a while.
            >>>
            >>>
            >>>> DigiXForm - I have got three lines in here which I have added many
            >>>> months ago, However I am sure they are wrong, as I am not actually
            >>>> passing any digi traffic. I wonder if anyone can spot a mistake in this
            >>>> con-fig below. I wonder if any of the Stations based in the UK have
            >>>> suggestions for best practice, I find reading material for UK APRS
            >>>> operations rare and hard to find.
            >>>>
            >>>>
            >>> http://aprsisce.wikidot.com/digipeating is the Wiki page on digipeating
            >>> and<DigiXForm>. These elements only work OUTSIDE of any RfPort at this
            >>> time. In some future revision, they'll be port-specific (hence the
            >>> placeholder), but for now, it's the global set that count. So, if you
            >>> move your set of three outside of the RfPort and replace the commented
            >>> one that's outside of that/those element(s), you should start digipeating.
            >>>
            >>> As far as I know, the UK and EU has adopted the "new paradigm" WIDEn-N,
            >>> so your lines look right if you've got a good RF placement and want to
            >>> run a WIDE2 digi. If you don't have large coverage, and only want to
            >>> run a WIDE1 fill-in (which is what I run off 20' of my tower), just keep
            >>> the first line (but I suspect you already understood that part).
            >>>
            >>> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
            >>>
            >>>
            >>>> Thanks
            >>>> Dan
            >>>> M0MST
            >>>>
            >>>> _______
            >>>>
            >>>> <!--RFPort[1]-->
            >>>> <RFPort Name="d710tes">
            >>>> <Protocol>KWD710(Pkt)</Protocol>
            >>>> <Device>COM3:19200,N,8,1</Device>
            >>>> <RfBaud>1200</RfBaud>
            >>>> <OpenCmd>^C^C^C~!!0</OpenCmd>
            >>>> <OpenCmd>TC 1!?</OpenCmd>
            >>>> <OpenCmd>TC 1!TS 1</OpenCmd>
            >>>> <OpenCmd>TN 2,1!TN 2,1</OpenCmd>
            >>>> <OpenCmd>^M!cmd:!5</OpenCmd>
            >>>> <OpenCmd>DIG OFF</OpenCmd>
            >>>> <OpenCmd>GB 4800</OpenCmd>
            >>>> <OpenCmd>HB 1200</OpenCmd>
            >>>> <OpenCmd>GPST $GPRMC</OpenCmd>
            >>>> <OpenCmd>LTM 10</OpenCmd>
            >>>> <OpenCmd>LTMH OFF</OpenCmd>
            >>>> <OpenCmd>LOC E 0</OpenCmd>
            >>>> <OpenCmd>M ON</OpenCmd>
            >>>> <OpenCmd>MCOM ON</OpenCmd>
            >>>> <OpenCmd>MS OFF</OpenCmd>
            >>>> <OpenCmd>CONO OFF</OpenCmd>
            >>>> <OpenCmd>P 250</OpenCmd>
            >>>> <OpenCmd>UI OFF</OpenCmd>
            >>>> <OpenCmd>UIF NOID</OpenCmd>
            >>>> <OpenCmd>UIT %</OpenCmd>
            >>>> <OpenCmd>X OFF</OpenCmd>
            >>>> <OpenCmd>HEADER OFF</OpenCmd>
            >>>> <OpenCmd>NE ON</OpenCmd>
            >>>> <OpenCmd>NO OFF</OpenCmd>
            >>>> <OpenCmd>ECHO OFF!cmd:!1.0</OpenCmd>
            >>>> <OpenCmd>BEACON EVERY 0!cmd:!1.0</OpenCmd>
            >>>> <OpenCmd>ECHO OFF!cmd:!1.00</OpenCmd>
            >>>> <OpenCmd>BEACON EVERY 0!cmd:!1.00</OpenCmd>
            >>>> <OpenCmd>^C^C^C~!!0</OpenCmd>
            >>>> <CloseCmd>^M!cmd:!1</CloseCmd>
            >>>> <CloseCmd>LTM 0</CloseCmd>
            >>>> <CloseCmd>TC 1!TS 1</CloseCmd>
            >>>> <CloseCmd>TN 0,0!TN 0,0</CloseCmd>
            >>>> <QuietTime>0</QuietTime>
            >>>> <Enabled>1</Enabled>
            >>>> <XmitEnabled>1</XmitEnabled>
            >>>> <RFtoISEnabled>1</RFtoISEnabled>
            >>>> <IStoRFEnabled>1</IStoRFEnabled>
            >>>> <MyCallNot3rd>0</MyCallNot3rd>
            >>>> <BeaconingEnabled>1</BeaconingEnabled>
            >>>> <BeaconPath></BeaconPath>
            >>>> <TelemetryEnabled>0</TelemetryEnabled>
            >>>> <TelemetryPath></TelemetryPath>
            >>>> <!--DigiXform-->
            >>>> <DigiXform>WIDE1-1=WIDE1*</DigiXform>
            >>>> <DigiXform>WIDE2-1=WIDE2*</DigiXform>
            >>>> <DigiXform>WIDE2-2=WIDE2-1</DigiXform>
            >>>> </RFPort>
            >>>> <!--RFPort[1]-->
            >>>>
            >>>>
            >>>
            >>
            >> ------------------------------------
            >>
            >> Yahoo! Groups Links
            >>
            >>
            >>
            >>
            >>
            >
            >
            > ------------------------------------
            >
            > Yahoo! Groups Links
            >
            >
            >
          • Lynn W Deffenbaugh (Mr)
            For Igates and Digis, I also keep a copy of the Transmit log open and enabled as well as Enables / Rf Ports / Log All. This gives me a record (in the
            Message 5 of 6 , Nov 2, 2010
            • 0 Attachment
              For Igates and Digis, I also keep a copy of the Transmit log open and
              enabled as well as Enables / Rf Ports / Log All. This gives me a record
              (in the APRSIS32*.LOG and *.PKT files) of what I've been doing on RF.

              Thanks for the config file. I received it already.

              Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

              Dan Rimell wrote:
              > Thats excellent, Ill email you the config off group. Looking at the digi
              > log it is working.
              >
              > Thanks
              > Dan
              >
              > On 02/11/2010 13:06, Lynn W Deffenbaugh (Mr) wrote:
              >
              >> As a final note, you can Enables / View Logs / Digi and then click
              >> Enable in that window's menu. Any Digipeater action (or inaction) will
              >> show up there.
              >>
              >> Thanks for the updated config. Now, if I can manage to not misplace it
              >> until I get it in the wiki...
              >>
              >> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
              >>
              >> Dan Rimell wrote:
              >>
              >>> Thanks for Clearing That Up
              >>>
              >>> That below was my latest port config, Following your information below I
              >>> have now changed it , Another copy. All understood regarding the
              >>> prefetch, will try and watch the yellow circle :).
              >>>
              >>> Below is the latest config, yet to see any digi's as there are no
              >>> mobiles in range of me at the moment
              >>>
              >>> Thanks
              >>> Dan
              >>> M0MST
              >>>
              >>> <Enables.APRSIS>1</Enables.APRSIS>
              >>> <Enables.RFPorts>1</Enables.RFPorts>
              >>> <Enables.RFPktLog>1</Enables.RFPktLog>
              >>> <Enables.RFReceiveOnly>0</Enables.RFReceiveOnly>
              >>> <Enables.GPS>0</Enables.GPS>
              >>> <Enables.OSMFetch>1</Enables.OSMFetch>
              >>> <Enables.Sound>0</Enables.Sound>
              >>> <Enables.NotifyOnNewBulletin>0</Enables.NotifyOnNewBulletin>
              >>> <Enables.CSVFile>1</Enables.CSVFile>
              >>> <Enables.AutoSaveGPX>1</Enables.AutoSaveGPX>
              >>> <Enables.Beacons>1</Enables.Beacons>
              >>> <Enables.Telemetry>0</Enables.Telemetry>
              >>> <Enables.AllMessages>0</Enables.AllMessages>
              >>> <Enables.MyMessages>1</Enables.MyMessages>
              >>> <Enables.HideQueries>0</Enables.HideQueries>
              >>> <Enables.NotifyOnQuery>1</Enables.NotifyOnQuery>
              >>> <Enables.NotifyOnNewMessage>1</Enables.NotifyOnNewMessage>
              >>> <Enables.Debug>0</Enables.Debug>
              >>> <Genius.MinTime>10</Genius.MinTime>
              >>> <Genius.MaxTime>30</Genius.MaxTime>
              >>> <Genius.TimeOnly>0</Genius.TimeOnly>
              >>> <Genius.StartStop>1</Genius.StartStop>
              >>> <Genius.BearingChange>30</Genius.BearingChange>
              >>> <Genius.ForecastError>0.10</Genius.ForecastError>
              >>> <Genius.MaxDistance>1.00</Genius.MaxDistance>
              >>> <Symbol.Table>/</Symbol.Table>
              >>> <Symbol.Symbol>#</Symbol.Symbol>
              >>> <Beacon.Timestamp>1</Beacon.Timestamp>
              >>> <Beacon.HHMMSS>1</Beacon.HHMMSS>
              >>> <Beacon.CourseSpeed>1</Beacon.CourseSpeed>
              >>> <Beacon.Altitude>1</Beacon.Altitude>
              >>> <Beacon.Why>1</Beacon.Why>
              >>> <Beacon.Comment>1</Beacon.Comment>
              >>> <Beacon.DAO>0</Beacon.DAO>
              >>> <Status.Enabled>1</Status.Enabled>
              >>> <Status.Interval>10</Status.Interval>
              >>> <Status.Timestamp>1</Status.Timestamp>
              >>> <Status.GridSquare>1</Status.GridSquare>
              >>> <Status.Text>APRSISCE/32 DIGI</Status.Text>
              >>> <Status.Choice>APRSISCE/32 DIGI</Status.Choice>
              >>> <Status.LastSent>2010-11-02T12:49:45</Status.LastSent>
              >>> <Scale>14.5686</Scale>
              >>> <Orientation>2</Orientation>
              >>> <Latitude>52.131434</Latitude>
              >>> <Longitude>-1.789009</Longitude>
              >>> <Altitude>0.0000</Altitude>
              >>> <BeaconPath>RAYNET-1,WIDE1-1,WIDE2-2</BeaconPath>
              >>> <EMailServer>EMAIL-2</EMailServer>
              >>> <WhoIsServer>WHO-IS</WhoIsServer>
              >>> <!--MessageGroup-->
              >>> <OSM.Zoom>10</OSM.Zoom>
              >>> <OSM.Percent>50</OSM.Percent>
              >>> <OSM.Server>tile.openstreetmap.org</OSM.Server>
              >>> <OSM.Port>80</OSM.Port>
              >>> <OSM.URLPrefix>/</OSM.URLPrefix>
              >>> <OSM.Path>C:/Documents and
              >>> Settings/Dan/Desktop/APRS/APRSIS-CE/OSMTiles/</OSM.Path>
              >>> <OSM.MinMBFree>8</OSM.MinMBFree>
              >>> <OSM.RetainDays>7</OSM.RetainDays>
              >>> <OSM.RetainZoom>5</OSM.RetainZoom>
              >>> <OSM.RevisionHours>0</OSM.RevisionHours>
              >>> <MultiTrack.width>0</MultiTrack.width>
              >>> <MultiTrack.height>0</MultiTrack.height>
              >>> <MultiTrack.Orientation>2</MultiTrack.Orientation>
              >>> <MultiTrack.Percent>50</MultiTrack.Percent>
              >>> <MultiTrack.Zoom>11</MultiTrack.Zoom>
              >>> <MultiTrack.Scale>8.0000</MultiTrack.Scale>
              >>> <WindowPlacement.x>88</WindowPlacement.x>
              >>> <WindowPlacement.y>116</WindowPlacement.y>
              >>> <WindowPlacement.width>960</WindowPlacement.width>
              >>> <WindowPlacement.height>554</WindowPlacement.height>
              >>> <View.ConfirmOnClose>0</View.ConfirmOnClose>
              >>> <View.Metric.Altitude>0</View.Metric.Altitude>
              >>> <View.Metric.Distance>0</View.Metric.Distance>
              >>> <View.Metric.Pressure>0</View.Metric.Pressure>
              >>> <View.Metric.Rainfall>0</View.Metric.Rainfall>
              >>> <View.Metric.Temperature>0</View.Metric.Temperature>
              >>> <View.Metric.Windspeed>0</View.Metric.Windspeed>
              >>> <View.VisibleLabelsMax>50</View.VisibleLabelsMax>
              >>> <View.Altitude>1</View.Altitude>
              >>> <View.Callsign>1</View.Callsign>
              >>> <View.Callsign.NotMe>0</View.Callsign.NotMe>
              >>> <View.Callsign.NotMine>0</View.Callsign.NotMine>
              >>> <View.Speed.Beaconed>1</View.Speed.Beaconed>
              >>> <View.Speed.Calculated>0</View.Speed.Calculated>
              >>> <View.Speed.Averaged>0</View.Speed.Averaged>
              >>> <View.Weather>1</View.Weather>
              >>> <View.ZoomReverse>1</View.ZoomReverse>
              >>> <View.ZoomMin>0</View.ZoomMin>
              >>> <View.ZoomMax>23</View.ZoomMax>
              >>> <View.WheelDelta>4</View.WheelDelta>
              >>> <View.ScrollInternals>1</View.ScrollInternals>
              >>> <Screen.DateSeconds>2367</Screen.DateSeconds>
              >>> <Screen.DateTime>1</Screen.DateTime>
              >>> <Screen.Altitude>1</Screen.Altitude>
              >>> <Screen.GridSquare>1</Screen.GridSquare>
              >>> <Screen.LatLon>1</Screen.LatLon>
              >>> <Screen.Satellites>1</Screen.Satellites>
              >>> <Screen.Tracks>1</Screen.Tracks>
              >>> <Screen.Circle>1</Screen.Circle>
              >>> <Screen.RedDot>1</Screen.RedDot>
              >>> <Screen.CrossHairs>1</Screen.CrossHairs>
              >>> <Screen.CrossHairTime>1000</Screen.CrossHairTime>
              >>> <View.Custom.Primary></View.Custom.Primary>
              >>> <View.Custom.Alternate></View.Custom.Alternate>
              >>> <View.Flight.Primary>'O^</View.Flight.Primary>
              >>> <View.Flight.Alternate>^</View.Flight.Alternate>
              >>> <View.Mobile.Primary>!'<=>()*0CFOPRSUXY[\^abefgjkpsuv</View.Mobile.Primary>
              >>> <View.Mobile.Alternate>>KOS^ksuv</View.Mobile.Alternate>
              >>> <View.Weather.Primary>_W</View.Weather.Primary>
              >>> <View.Weather.Alternate>([*:<@BDEFGHIJTUW_efgptwy{</View.Weather.Alternate>
              >>> <Center.Latitude>52.147551</Center.Latitude>
              >>> <Center.Longitude>-1.447993</Center.Longitude>
              >>> <Preferred.Latitude>0.000000</Preferred.Latitude>
              >>> <Preferred.Longitude>0.000000</Preferred.Longitude>
              >>> <Preferred.Zoom>0</Preferred.Zoom>
              >>> <Preferred.Scale>8.0000</Preferred.Scale>
              >>> <Preferred.Orientation>0</Preferred.Orientation>
              >>> <Tracking.Call>G6MMD-7</Tracking.Call>
              >>> <Tracking.Center>0</Tracking.Center>
              >>> <Tracking.Locked>0</Tracking.Locked>
              >>> <APRSISPort>@...:14578</APRSISPort>
              >>> <GPSPort></GPSPort>
              >>>
              >>>
              >>> <!--RFPort[0]-->
              >>> <RFPort Name="agw">
              >>> <Protocol>AGW</Protocol>
              >>> <Device>@LOCALHOST:8000</Device>
              >>> <RfBaud>1200</RfBaud>
              >>> <!--OpenCmd-->
              >>> <!--CloseCmd-->
              >>> <QuietTime>0</QuietTime>
              >>> <Enabled>0</Enabled>
              >>> <XmitEnabled>1</XmitEnabled>
              >>> <RFtoISEnabled>1</RFtoISEnabled>
              >>> <IStoRFEnabled>1</IStoRFEnabled>
              >>> <MyCallNot3rd>0</MyCallNot3rd>
              >>> <BeaconingEnabled>1</BeaconingEnabled>
              >>> <BeaconPath></BeaconPath>
              >>> <TelemetryEnabled>0</TelemetryEnabled>
              >>> <TelemetryPath></TelemetryPath>
              >>> <!--DigiXform-->
              >>> </RFPort>
              >>> <!--RFPort[0]-->
              >>>
              >>> <!--RFPort[1]-->
              >>> <RFPort Name="d710tes">
              >>> <Protocol>KWD710(Pkt)</Protocol>
              >>> <Device>COM3:19200,N,8,1</Device>
              >>> <RfBaud>1200</RfBaud>
              >>> <OpenCmd>^C^C^C~!!0</OpenCmd>
              >>> <OpenCmd>TC 1!?</OpenCmd>
              >>> <OpenCmd>TC 1!TS 1</OpenCmd>
              >>> <OpenCmd>TN 2,1!TN 2,1</OpenCmd>
              >>> <OpenCmd>^M!cmd:!5</OpenCmd>
              >>> <OpenCmd>DIG ON</OpenCmd>
              >>> <OpenCmd>GB 4800</OpenCmd>
              >>> <OpenCmd>HB 1200</OpenCmd>
              >>> <OpenCmd>GPST $GPRMC</OpenCmd>
              >>> <OpenCmd>LTM 10</OpenCmd>
              >>> <OpenCmd>LTMH OFF</OpenCmd>
              >>> <OpenCmd>LOC E 0</OpenCmd>
              >>> <OpenCmd>M ON</OpenCmd>
              >>> <OpenCmd>MCOM ON</OpenCmd>
              >>> <OpenCmd>MS OFF</OpenCmd>
              >>> <OpenCmd>CONO OFF</OpenCmd>
              >>> <OpenCmd>P 250</OpenCmd>
              >>> <OpenCmd>UI OFF</OpenCmd>
              >>> <OpenCmd>UIF NOID</OpenCmd>
              >>> <OpenCmd>UIT %</OpenCmd>
              >>> <OpenCmd>X OFF</OpenCmd>
              >>> <OpenCmd>HEADER OFF</OpenCmd>
              >>> <OpenCmd>NE ON</OpenCmd>
              >>> <OpenCmd>NO OFF</OpenCmd>
              >>> <OpenCmd>ECHO OFF!cmd:!1.0</OpenCmd>
              >>> <OpenCmd>BEACON EVERY 0!cmd:!1.0</OpenCmd>
              >>> <OpenCmd>ECHO OFF!cmd:!1.00</OpenCmd>
              >>> <OpenCmd>BEACON EVERY 0!cmd:!1.00</OpenCmd>
              >>> <OpenCmd>^C^C^C~!!0</OpenCmd>
              >>> <CloseCmd>^M!cmd:!1</CloseCmd>
              >>> <CloseCmd>LTM 0</CloseCmd>
              >>> <CloseCmd>TC 1!TS 1</CloseCmd>
              >>> <CloseCmd>TN 0,0!TN 0,0</CloseCmd>
              >>> <QuietTime>0</QuietTime>
              >>> <Enabled>1</Enabled>
              >>> <XmitEnabled>1</XmitEnabled>
              >>> <RFtoISEnabled>1</RFtoISEnabled>
              >>> <IStoRFEnabled>1</IStoRFEnabled>
              >>> <MyCallNot3rd>0</MyCallNot3rd>
              >>> <BeaconingEnabled>1</BeaconingEnabled>
              >>> <BeaconPath></BeaconPath>
              >>> <TelemetryEnabled>0</TelemetryEnabled>
              >>> <TelemetryPath></TelemetryPath>
              >>> <!--DigiXform-->
              >>> </RFPort>
              >>> <!--RFPort[1]-->
              >>>
              >>> <DigiXform>WIDE1-1=WIDE1*</DigiXform>
              >>> <DigiXform>WIDE2-1=WIDE2*</DigiXform>
              >>> <DigiXform>WIDE2-2=WIDE2-1</DigiXform>
              >>>
              >>>
              >>>
              >>> On 02/11/2010 12:21, Lynn W Deffenbaugh (Mr) wrote:
              >>>
              >>>
              >>>> Dan Rimell wrote:
              >>>>
              >>>>
              >>>>> Just a few queries with issues I am having. I managed to solve the
              >>>>>
              >>>>>
              >>>> issue
              >>>>
              >>>>
              >>>>> with enabling Band B as the correct TNC Band with trail and error.
              >>>>>
              >>>>>
              >>>>>
              >>>> Can you post your final<RfPort> section, particularly the<OpenCmd>s
              >>>> and<CloseCmd>s? Or confirm that the latest one is the one listed
              >>>> below? When I get to it, I'm hoping to add pages to the Wiki for the
              >>>> various setups.
              >>>>
              >>>>
              >>>>
              >>>>> I did see the topic yesterday regarding mapping, which reminded me of
              >>>>> something I have always had trouble with. Whenever I select the "pre
              >>>>> fetch" option it will cause the software to "pause". By this I mean it
              >>>>> states queued 2804\2975 tiles, and doesnt move forward. There seems to
              >>>>> be no internet activity apart from the APRSIS feed. Wonder if im doing
              >>>>> something wrong.
              >>>>>
              >>>>>
              >>>>>
              >>>> There's a pregnant pause before it throws up the information box that
              >>>> you mention while it tries to figure out how many tiles it needs versus
              >>>> how many tiles are already in the cache. When you clear the
              >>>> confirmation, all of the needed tiles are queued for fetching. There
              >>>> should be a (really tiny at first) yellow circle that will expand out to
              >>>> the range circle as the queue is worked off. This is the tile fetcher
              >>>> progress indicator. You can also double-click any empty map section and
              >>>> see the current state of the tile fetcher queue and threads.
              >>>>
              >>>> If you're using pre-fetch, you'll want to remember to disable the purger
              >>>> (http://aprsisce.wikidot.com/moving-osmtiles) or your tiles will
              >>>> disappear after a while.
              >>>>
              >>>>
              >>>>
              >>>>> DigiXForm - I have got three lines in here which I have added many
              >>>>> months ago, However I am sure they are wrong, as I am not actually
              >>>>> passing any digi traffic. I wonder if anyone can spot a mistake in this
              >>>>> con-fig below. I wonder if any of the Stations based in the UK have
              >>>>> suggestions for best practice, I find reading material for UK APRS
              >>>>> operations rare and hard to find.
              >>>>>
              >>>>>
              >>>>>
              >>>> http://aprsisce.wikidot.com/digipeating is the Wiki page on digipeating
              >>>> and<DigiXForm>. These elements only work OUTSIDE of any RfPort at this
              >>>> time. In some future revision, they'll be port-specific (hence the
              >>>> placeholder), but for now, it's the global set that count. So, if you
              >>>> move your set of three outside of the RfPort and replace the commented
              >>>> one that's outside of that/those element(s), you should start digipeating.
              >>>>
              >>>> As far as I know, the UK and EU has adopted the "new paradigm" WIDEn-N,
              >>>> so your lines look right if you've got a good RF placement and want to
              >>>> run a WIDE2 digi. If you don't have large coverage, and only want to
              >>>> run a WIDE1 fill-in (which is what I run off 20' of my tower), just keep
              >>>> the first line (but I suspect you already understood that part).
              >>>>
              >>>> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
              >>>>
              >>>>
              >>>>
              >>>>> Thanks
              >>>>> Dan
              >>>>> M0MST
              >>>>>
              >>>>> _______
              >>>>>
              >>>>> <!--RFPort[1]-->
              >>>>> <RFPort Name="d710tes">
              >>>>> <Protocol>KWD710(Pkt)</Protocol>
              >>>>> <Device>COM3:19200,N,8,1</Device>
              >>>>> <RfBaud>1200</RfBaud>
              >>>>> <OpenCmd>^C^C^C~!!0</OpenCmd>
              >>>>> <OpenCmd>TC 1!?</OpenCmd>
              >>>>> <OpenCmd>TC 1!TS 1</OpenCmd>
              >>>>> <OpenCmd>TN 2,1!TN 2,1</OpenCmd>
              >>>>> <OpenCmd>^M!cmd:!5</OpenCmd>
              >>>>> <OpenCmd>DIG OFF</OpenCmd>
              >>>>> <OpenCmd>GB 4800</OpenCmd>
              >>>>> <OpenCmd>HB 1200</OpenCmd>
              >>>>> <OpenCmd>GPST $GPRMC</OpenCmd>
              >>>>> <OpenCmd>LTM 10</OpenCmd>
              >>>>> <OpenCmd>LTMH OFF</OpenCmd>
              >>>>> <OpenCmd>LOC E 0</OpenCmd>
              >>>>> <OpenCmd>M ON</OpenCmd>
              >>>>> <OpenCmd>MCOM ON</OpenCmd>
              >>>>> <OpenCmd>MS OFF</OpenCmd>
              >>>>> <OpenCmd>CONO OFF</OpenCmd>
              >>>>> <OpenCmd>P 250</OpenCmd>
              >>>>> <OpenCmd>UI OFF</OpenCmd>
              >>>>> <OpenCmd>UIF NOID</OpenCmd>
              >>>>> <OpenCmd>UIT %</OpenCmd>
              >>>>> <OpenCmd>X OFF</OpenCmd>
              >>>>> <OpenCmd>HEADER OFF</OpenCmd>
              >>>>> <OpenCmd>NE ON</OpenCmd>
              >>>>> <OpenCmd>NO OFF</OpenCmd>
              >>>>> <OpenCmd>ECHO OFF!cmd:!1.0</OpenCmd>
              >>>>> <OpenCmd>BEACON EVERY 0!cmd:!1.0</OpenCmd>
              >>>>> <OpenCmd>ECHO OFF!cmd:!1.00</OpenCmd>
              >>>>> <OpenCmd>BEACON EVERY 0!cmd:!1.00</OpenCmd>
              >>>>> <OpenCmd>^C^C^C~!!0</OpenCmd>
              >>>>> <CloseCmd>^M!cmd:!1</CloseCmd>
              >>>>> <CloseCmd>LTM 0</CloseCmd>
              >>>>> <CloseCmd>TC 1!TS 1</CloseCmd>
              >>>>> <CloseCmd>TN 0,0!TN 0,0</CloseCmd>
              >>>>> <QuietTime>0</QuietTime>
              >>>>> <Enabled>1</Enabled>
              >>>>> <XmitEnabled>1</XmitEnabled>
              >>>>> <RFtoISEnabled>1</RFtoISEnabled>
              >>>>> <IStoRFEnabled>1</IStoRFEnabled>
              >>>>> <MyCallNot3rd>0</MyCallNot3rd>
              >>>>> <BeaconingEnabled>1</BeaconingEnabled>
              >>>>> <BeaconPath></BeaconPath>
              >>>>> <TelemetryEnabled>0</TelemetryEnabled>
              >>>>> <TelemetryPath></TelemetryPath>
              >>>>> <!--DigiXform-->
              >>>>> <DigiXform>WIDE1-1=WIDE1*</DigiXform>
              >>>>> <DigiXform>WIDE2-1=WIDE2*</DigiXform>
              >>>>> <DigiXform>WIDE2-2=WIDE2-1</DigiXform>
              >>>>> </RFPort>
              >>>>> <!--RFPort[1]-->
              >>>>>
              >>>>>
              >>>>>
              >>> ------------------------------------
              >>>
              >>> Yahoo! Groups Links
              >>>
              >>>
              >>>
              >>>
              >>>
              >>>
              >> ------------------------------------
              >>
              >> Yahoo! Groups Links
              >>
              >>
              >>
              >>
              >
              >
              > ------------------------------------
              >
              > Yahoo! Groups Links
              >
              >
              >
              >
              >
            Your message has been successfully submitted and would be delivered to recipients shortly.