Loading ...
Sorry, an error occurred while loading the content.
 

Re: [aprsisce] New version

Expand Messages
  • Phillip
    Hi Lynn Yes I goofed on the address to the group.. Callsign for aprsisce is zl2tze-15 Ui-View is -1 http://aprsnz.aprs2.net:14501/ Config / KISS is where I
    Message 1 of 3 , Feb 10, 2010
      Hi Lynn
                    Yes I goofed on the address  to the group..
       
                  Callsign for aprsisce is zl2tze-15
                   Ui-View is -1
       
       
      Config / KISS is where I put the IP address 
       
      How often does it do  telemetry  broadcast
       
      73 Phillip
       
      -------Original Message-------
       
      Date: 11/02/2010 10:59:34 a.m.
      Subject: [aprsisce] Re: [APRS] New version
       
      (Pardon the intrusion into the wrong group, but I might as well answer
      it here and where it should have been)
       
      Phillip wrote:
      > I entered a TCP port
      >
       
      You entered a TCP Port where?  NMEA GPS?
       
      > The following result was I have no idea where this cam from
      > But  on my Ui-View PC the  following appeared
      >
      > >From                         To
      > Received
      >
      > ZL2TZE-15           ZL2TZE-15                    PARM.Battery,Charging/AC
      > GPS+Sat,A4,A5,A/C,Charging,GPS,B4,B5,B6,B7,B8
      > ZL2TZE-15           ZL2TZE-15                    UNIT.Percentage
      > Charge/On/Off,Sat/On/Off,N/A,N/A,N/A,N/A,N/A
      > ZL2TZE-15           ZL2TZE-15                    EQNS,0,1,0,0,1,0,0,1,0,0,1
      > 0
      > ZL2TZE-15           ZL2TZE-15                    BITS,111111111,Battery
      > State Tracking
      >
       
      Those messages are automatically generated by APRSISCE/32 to define the
      labels, units, and conversions for the APRS telemetry data generated by
      the client.  They will only be generated once per telemetry version that
      the client does.  These messages used to be generated by APRSISCE on
      Windows Mobile every time the client started but are new to APRSIS32 on
      Win32.
       
      I hope your UI-View is running an -SSID different than the -15 that
      you've got APRSIS32 configured for?  Otherwise strange things can happen.
       
      Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
       
       
       
       
      FREE Animations for your email - by IncrediMail! Click Here!
    • Lynn W. Deffenbaugh
      ... Not a problem, maybe someone there will be curious enough about APRSISCE/32 to track it down and give it a try! ... Do you actually have a KISS TNC that is
      Message 2 of 3 , Feb 10, 2010
        Phillip wrote:
        >
        > Yes I goofed on the address to the group..
        >

        Not a problem, maybe someone there will be curious enough about
        APRSISCE/32 to track it down and give it a try!

        >
        > Callsign for aprsisce is zl2tze-15
        > Ui-View is -1
        >
        > http://aprsnz.aprs2.net:14501/
        >
        > Config / KISS is where I put the IP address
        >

        Do you actually have a KISS TNC that is IP addressible? If not, you can
        leave all of that configuration blank. Having it populated won't hurt
        anything as long as you don't enable KISS. Otherwise, it will try to
        connect to that address and port hoping to find an IP-addressible KISS TNC!

        >
        > How often does it do telemetry broadcast
        >

        Telemetry is sent (if enabled) every 15 minutes can can be changed in
        the XML file under TelementryInterval. If you change TelemetryDefined
        to a different value (or delete the key), then the client will
        re-transmit the definitions the next time it sends a telemetry packet.

        UI-View shows ALL messages directed to your callsign regardless of -SSID
        (per spec, believe it or not) which is why you saw them there. I'll be
        doing something similar when the "enhance messaging" task gets to the
        top of my ToDo list.

        Lynn (D) - KJ4ERJ
      • Phillip
        Hi Lynn, Ok TCP blank.. one other thing if you look at my -15 on aprs.if you will see a posit for 02/02/2010 Again I don t know how that happened Is there
        Message 3 of 3 , Feb 10, 2010
          Hi Lynn,
                          Ok TCP blank..
           
          one other thing if you look at my -15  on aprs.if you will see a posit for 02/02/2010
           
          Again I don't know how that happened
           
          Is there away of TXing without any TNC just via the aprsis
           
          Phillip
          ZL2TZE  
           
           
           
           
          -------Original Message-------
           
          Date: 11/02/2010 11:24:39 a.m.
          Subject: Re: [aprsisce] New version
           
          Phillip wrote:
          >
          >              Yes I goofed on the address  to the group..
          >
           
          Not a problem, maybe someone there will be curious enough about
          APRSISCE/32 to track it down and give it a try!
           
          >
          >             Callsign for aprsisce is zl2tze-15
          >              Ui-View is -1
          >
          >
          > Config / KISS is where I put the IP address
          >
           
          Do you actually have a KISS TNC that is IP addressible?  If not, you can
          leave all of that configuration blank.  Having it populated won't hurt
          anything as long as you don't enable KISS.  Otherwise, it will try to
          connect to that address and port hoping to find an IP-addressible KISS TNC!
           
          >
          > How often does it do  telemetry  broadcast
          >
           
          Telemetry is sent (if enabled) every 15 minutes can can be changed in
          the XML file under TelementryInterval.  If you change TelemetryDefined
          to a different value (or delete the key), then the client will
          re-transmit the definitions the next time it sends a telemetry packet.
           
          UI-View shows ALL messages directed to your callsign regardless of -SSID
          (per spec, believe it or not) which is why you saw them there.  I'll be
          doing something similar when the "enhance messaging" task gets to the
          top of my ToDo list.
           
          Lynn (D) - KJ4ERJ
           
           
           
          ------------------------------------
           
          Yahoo! Groups Links
           
          <*> To visit your group on the web, go to:
           
          <*> Your email settings:
              Individual Email | Traditional
           
          <*> To change settings online go to:
              (Yahoo! ID required)
           
          <*> To change settings via email:
           
          <*> To unsubscribe from this group, send an email to:
           
          <*> Your use of Yahoo! Groups is subject to:
           
          FREE Animations for your email - by IncrediMail! Click Here!
        Your message has been successfully submitted and would be delivered to recipients shortly.