Loading ...
Sorry, an error occurred while loading the content.
 

KPC-3 Version 5.0 No receive

Expand Messages
  • k7mt
    Hi gang, I set up my KPC3 Version 5.0 and initialized it using Kiss etc. It transmits ok but will no receive any traffic although I am watching traffice come
    Message 1 of 6 , Nov 17, 2013

      Hi gang,

       

      I set up my KPC3 Version 5.0 and initialized it using Kiss etc. It transmits ok but will no receive any traffic although I am watching traffice come in on other radio/tnc. Here is my Log.  Do I require an update to the KPC3 from version 5.0??

       

      WinMain:2013-11-17T16:44:36.713 Starting Port(KPC3Kiss)
      Port(KPC3Kiss):2013-11-17T16:44:36.713 CpReader Running on COM1:9600,N,8,1 (6 OpenCmds, 4 CloseCmds)
      Port(KPC3Kiss):2013-11-17T16:44:36.713 Opening COM1:9600,N,8,1
      Port(KPC3Kiss):2013-11-17T16:44:36.713 Opening COM1 with 4 Args
      Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:Packet Length 64 Version 2
      Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:ServiceMask 0x1 Reserved1 0x0
      Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:MaxQueue Tx 0 Rx 0 Baud 268435456
      Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:Provider SubType 1 Capabilities 0xFF
      Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:Settable Params 127 Baud 0x1006FFFF Data 0xF StopParity 0x1F07
      Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:Current Queue Tx 0 Rx 4096
      Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:Provider Specifics 0x0 0x0
      Port(KPC3Kiss):2013-11-17T16:44:36.713 CpOpen:Port COM1 9600,N,8,1 !CTSFlow !DSRFlow !OutXon(2048) !InXoff(512) DTR_ENABLE !DSRSense RTS_ENABLE
      Port(KPC3Kiss):2013-11-17T16:44:36.713 Opened COM1:9600,N,8,1, Flushing 0 in TransmitQueue, Sending 6 OpenCmds
      Port(KPC3Kiss):2013-11-17T16:44:36.713 Command[3]:^M~
      Port(KPC3Kiss):2013-11-17T16:44:36.713 Output[1]:<0D>
      Port(KPC3Kiss):2013-11-17T16:44:36.760 CmdResp[5]:<0D>cmd:
      Port(KPC3Kiss):2013-11-17T16:44:36.760 Command[3]:^M~
      Port(KPC3Kiss):2013-11-17T16:44:36.760 Output[1]:<0D>
      Port(KPC3Kiss):2013-11-17T16:44:36.807 CmdResp[5]:<0D>cmd:
      Port(KPC3Kiss):2013-11-17T16:44:36.807 Command[9]:XFLOW OFF
      Port(KPC3Kiss):2013-11-17T16:44:36.807 Output[10]:XFLOW OFF<0D>
      Port(KPC3Kiss):2013-11-17T16:44:36.901 CmdResp[52]:XFLOW OFF<0D>Command not available in NEWUSER mode<0D>cmd:
      Port(KPC3Kiss):2013-11-17T16:44:36.901 Command[11]:FULLDUP OFF
      Port(KPC3Kiss):2013-11-17T16:44:36.901 Output[12]:FULLDUP OFF<0D>
      Port(KPC3Kiss):2013-11-17T16:44:36.994 CmdResp[54]:FULLDUP OFF<0D>Command not available in NEWUSER mode<0D>cmd:
      Port(KPC3Kiss):2013-11-17T16:44:36.994 Command[7]:KISS ON
      Port(KPC3Kiss):2013-11-17T16:44:36.994 Output[8]:KISS ON<0D>
      Port(KPC3Kiss):2013-11-17T16:44:37.057 CmdResp[22]:KISS ON<0D>    $<0D>EH?<0D>cmd:
      Port(KPC3Kiss):2013-11-17T16:44:37.057 Command[7]:RESTART
      Port(KPC3Kiss):2013-11-17T16:44:37.057 Output[8]:RESTART<0D>
      Port(KPC3Kiss):2013-11-17T16:44:37.448 KISS:Missing Leading C0[22]:RESTART<0D>    $<0D>EH?<0D>cmd:
      Port(KPC3Kiss):2013-11-17T16:44:48.088 KISS:Missing Leading C0[85]:N0WPS>APU25N,POINT6,WIDE1,MACPAS*,WIDE2: <UI>:=4731.29N/11413.51W_Ronan MT {UIV32N}<0D 0D>
      Port(KPC3Kiss):2013-11-17T16:44:58.276 KISS:Missing Leading C0[107]:GOLDCR>APN391,MACPAS*,WIDE2-1: <UI>:@171729z4632.33N/11254.27W_274/022g029t027r000p000P000h84b10133.DsVP<0D 0A 0D>
      Port(KPC3Kiss):2013-11-17T16:45:07.166 KISS:Missing Leading C0[102]:AB6VJ>T6QQTV,POINT6,WIDE1,MACPAS*,WIDE2: <UI>:`*a=l!5k/'"@1}Don't follow me, I'm lost!|"g%I'T|!wS_!|3<0D>
      Port(KPC3Kiss):2013-11-17T16:45:32.932 KISS:Missing Leading C0[98]:W7PG-7>APOTC1,W7HAV-5,W7ECA-10,MACPAS*,WIDE3: <UI>:!4734.13N/10656.47W_358/000g000t024P000h91OD1w<0D>
      Port(KPC3Kiss):2013-11-17T16:46:10.182 KISS:Missing Leading C0[76]:AB6VJ>T6QQTV,POINT6,WIDE1,MACPAS*,WIDE2: <UI>:`*a=l!5k/'"@1}|"h%J'U|!wS_!|3<0D>
      Port(KPC3Kiss):2013-11-17T16:46:13.557 KISS:Missing Leading C0[126]:KB7STN>APNW01,W7SWT-11,MACPAS*,WIDE2: <UI>:@171646z4852.94N/11155.08W_340/000g000t010r000p000P000h88b10137Davis Vantage Pro2 <0D>
      WinMain:2013-11-17T16:46:49.244 Stopping Port(KPC3Kiss)
      WinMain:2013-11-17T16:46:49.244 Waiting at line 675
      WinMain:2013-11-17T16:46:49.354 Waiting at line 675
      WinMain:2013-11-17T16:46:49.463 Waiting at line 675
      Port(KPC3Kiss):2013-11-17T16:46:49.494 Terminating after 36255 msec vs 62000 Quiet
      Port(KPC3Kiss):2013-11-17T16:46:49.494 Closing COM1:9600,N,8,1
      Port(KPC3Kiss):2013-11-17T16:46:49.494 Command[13]:^192^255^192~
      Port(KPC3Kiss):2013-11-17T16:46:49.494 Output[3]:<C0 FF C0>
      Port(KPC3Kiss):2013-11-17T16:46:49.494 Command[7]:^C^C^C~
      Port(KPC3Kiss):2013-11-17T16:46:49.494 Output[3]:<03 03 03>
      Port(KPC3Kiss):2013-11-17T16:46:49.494 Command[4]:TC 1
      Port(KPC3Kiss):2013-11-17T16:46:49.494 Output[5]:TC 1<0D>
      Port(KPC3Kiss):2013-11-17T16:46:49.557 CmdResp[22]:<C0 FF C0>TC 1<0D>    $<0D>EH?<0D>cmd:
      WinMain:2013-11-17T16:46:49.573 Waiting at line 2745
      WinMain:2013-11-17T16:46:49.682 Waiting at line 2745
      WinMain:2013-11-17T16:46:49.791 Waiting at line 2745
      WinMain:2013-11-17T16:46:49.901 Waiting at line 2745
      WinMain:2013-11-17T16:46:50.010 Waiting at line 2745
      WinMain:2013-11-17T16:46:50.119 Waiting at line 2745
      WinMain:2013-11-17T16:46:50.229 Waiting at line 2745
      WinMain:2013-11-17T16:46:50.338 Waiting at line 2745
      WinMain:2013-11-17T16:46:50.448 Waiting at line 2745
      Port(KPC3Kiss):2013-11-17T16:46:50.557 Missed Expected Response(TS 1) From Command(TC 1!TS 1)
      Port(KPC3Kiss):2013-11-17T16:46:50.557 Command[6]:TN 2,0
      Port(KPC3Kiss):2013-11-17T16:46:50.557 Output[7]:TN 2,0<0D>
      WinMain:2013-11-17T16:46:50.557 Waiting at line 2745
      Port(KPC3Kiss):2013-11-17T16:46:50.619 CmdResp[21]:TN 2,0<0D>    $<0D>EH?<0D>cmd:
      Port(KPC3Kiss):2013-11-17T16:46:50.635 Reader Exiting

    • Mike Miller
      To put a KPC3 v5.0 into KISS, the command is INT KISS RESTART Not Kiss ON, Restart. 73 Mike kc9doa
      Message 2 of 6 , Nov 17, 2013
        To put a KPC3 v5.0 into KISS, the command is
        INT KISS
        RESTART

        Not Kiss ON, Restart.
        73
        Mike kc9doa

        On 17 Nov 2013 at 9:02, k7mt@... wrote:

        > Hi gang,
        >
        > I set up my KPC3 Version 5.0 and initialized it using Kiss
        > etc. It transmits ok but will no receive any traffic although I
        > am watching traffice come in on other radio/tnc. Here is my
        > Log. Do I require an update to the KPC3 from version 5.0??
        >
        > WinMain:2013-11-17T16:44:36.713 Starting Port(KPC3Kiss)
        > Port(KPC3Kiss):2013-11-17T16:44:36.713 CpReader Running on
        > COM1:9600,N,8,1 (6 OpenCmds, 4 CloseCmds)
        > Port(KPC3Kiss):2013-11-17T16:44:36.713 Opening
        > COM1:9600,N,8,1
        > Port(KPC3Kiss):2013-11-17T16:44:36.713 Opening COM1 with 4
        > Args
        > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:Packet Length 64
        > Version 2
        > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:ServiceMask 0x1
        > Reserved1 0x0
        > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:MaxQueue Tx 0 Rx 0
        > Baud 268435456
        > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:Provider SubType 1
        > Capabilities 0xFF
        > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:Settable Params 127
        > Baud 0x1006FFFF Data 0xF StopParity 0x1F07
        > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:Current Queue Tx 0
        > Rx 4096
        > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:Provider Specifics
        > 0x0 0x0
        > Port(KPC3Kiss):2013-11-17T16:44:36.713 CpOpen:Port COM1
        > 9600,N,8,1 !CTSFlow !DSRFlow !OutXon(2048) !InXoff(512)
        > DTR_ENABLE !DSRSense RTS_ENABLE
        > Port(KPC3Kiss):2013-11-17T16:44:36.713 Opened COM1:9600,N,8,1,
        > Flushing 0 in TransmitQueue, Sending 6 OpenCmds
        > Port(KPC3Kiss):2013-11-17T16:44:36.713 Command[3]:^M~
        > Port(KPC3Kiss):2013-11-17T16:44:36.713 Output[1]:<0D>
        > Port(KPC3Kiss):2013-11-17T16:44:36.760 CmdResp[5]:<0D>cmd:
        > Port(KPC3Kiss):2013-11-17T16:44:36.760 Command[3]:^M~
        > Port(KPC3Kiss):2013-11-17T16:44:36.760 Output[1]:<0D>
        > Port(KPC3Kiss):2013-11-17T16:44:36.807 CmdResp[5]:<0D>cmd:
        > Port(KPC3Kiss):2013-11-17T16:44:36.807 Command[9]:XFLOW OFF
        > Port(KPC3Kiss):2013-11-17T16:44:36.807 Output[10]:XFLOW
        > OFF<0D>
        > Port(KPC3Kiss):2013-11-17T16:44:36.901 CmdResp[52]:XFLOW
        > OFF<0D>Command not available in NEWUSER mode<0D>cmd:
        > Port(KPC3Kiss):2013-11-17T16:44:36.901 Command[11]:FULLDUP
        > OFF
        > Port(KPC3Kiss):2013-11-17T16:44:36.901 Output[12]:FULLDUP
        > OFF<0D>
        > Port(KPC3Kiss):2013-11-17T16:44:36.994 CmdResp[54]:FULLDUP
        > OFF<0D>Command not available in NEWUSER mode<0D>cmd:
        > Port(KPC3Kiss):2013-11-17T16:44:36.994 Command[7]:KISS ON
        > Port(KPC3Kiss):2013-11-17T16:44:36.994 Output[8]:KISS ON<0D>
        > Port(KPC3Kiss):2013-11-17T16:44:37.057 CmdResp[22]:KISS ON<0D>
        > $<0D>EH?<0D>cmd:
        > Port(KPC3Kiss):2013-11-17T16:44:37.057 Command[7]:RESTART
        > Port(KPC3Kiss):2013-11-17T16:44:37.057 Output[8]:RESTART<0D>
        > Port(KPC3Kiss):2013-11-17T16:44:37.448 KISS:Missing Leading
        > C0[22]:RESTART<0D> $<0D>EH?<0D>cmd:
        > Port(KPC3Kiss):2013-11-17T16:44:48.088 KISS:Missing Leading
        > C0[85]:N0WPS>APU25N,POINT6,WIDE1,MACPAS*,WIDE2:
        > <UI>:=4731.29N/11413.51W_Ronan MT {UIV32N}<0D 0D>
        > Port(KPC3Kiss):2013-11-17T16:44:58.276 KISS:Missing Leading
        > C0[107]:GOLDCR>APN391,MACPAS*,WIDE2-1:
        > <UI>:@171729z4632.33N/11254.27W_274/022g029t027r000p000P000h84b
        > 10133.DsVP<0D 0A 0D>
        > Port(KPC3Kiss):2013-11-17T16:45:07.166 KISS:Missing Leading
        > C0[102]:AB6VJ>T6QQTV,POINT6,WIDE1,MACPAS*,WIDE2:
        > <UI>:`*a=l!5k/'"@1}Don't follow me, I'm
        > lost!|"g%I'T|!wS_!|3<0D>
        > Port(KPC3Kiss):2013-11-17T16:45:32.932 KISS:Missing Leading
        > C0[98]:W7PG-7>APOTC1,W7HAV-5,W7ECA-10,MACPAS*,WIDE3:
        > <UI>:!4734.13N/10656.47W_358/000g000t024P000h91OD1w<0D>
        > Port(KPC3Kiss):2013-11-17T16:46:10.182 KISS:Missing Leading
        > C0[76]:AB6VJ>T6QQTV,POINT6,WIDE1,MACPAS*,WIDE2:
        > <UI>:`*a=l!5k/'"@1}|"h%J'U|!wS_!|3<0D>
        > Port(KPC3Kiss):2013-11-17T16:46:13.557 KISS:Missing Leading
        > C0[126]:KB7STN>APNW01,W7SWT-11,MACPAS*,WIDE2:
        > <UI>:@171646z4852.94N/11155.08W_340/000g000t010r000p000P000h88b
        > 10137Davis Vantage Pro2 <0D>
        > WinMain:2013-11-17T16:46:49.244 Stopping Port(KPC3Kiss)
        > WinMain:2013-11-17T16:46:49.244 Waiting at line 675
        > WinMain:2013-11-17T16:46:49.354 Waiting at line 675
        > WinMain:2013-11-17T16:46:49.463 Waiting at line 675
        > Port(KPC3Kiss):2013-11-17T16:46:49.494 Terminating after 36255
        > msec vs 62000 Quiet
        > Port(KPC3Kiss):2013-11-17T16:46:49.494 Closing
        > COM1:9600,N,8,1
        > Port(KPC3Kiss):2013-11-17T16:46:49.494
        > Command[13]:^192^255^192~
        > Port(KPC3Kiss):2013-11-17T16:46:49.494 Output[3]:<C0 FF C0>
        > Port(KPC3Kiss):2013-11-17T16:46:49.494 Command[7]:^C^C^C~
        > Port(KPC3Kiss):2013-11-17T16:46:49.494 Output[3]:<03 03 03>
        > Port(KPC3Kiss):2013-11-17T16:46:49.494 Command[4]:TC 1
        > Port(KPC3Kiss):2013-11-17T16:46:49.494 Output[5]:TC 1<0D>
        > Port(KPC3Kiss):2013-11-17T16:46:49.557 CmdResp[22]:<C0 FF C0>TC
        > 1<0D> $<0D>EH?<0D>cmd:
        > WinMain:2013-11-17T16:46:49.573 Waiting at line 2745
        > WinMain:2013-11-17T16:46:49.682 Waiting at line 2745
        > WinMain:2013-11-17T16:46:49.791 Waiting at line 2745
        > WinMain:2013-11-17T16:46:49.901 Waiting at line 2745
        > WinMain:2013-11-17T16:46:50.010 Waiting at line 2745
        > WinMain:2013-11-17T16:46:50.119 Waiting at line 2745
        > WinMain:2013-11-17T16:46:50.229 Waiting at line 2745
        > WinMain:2013-11-17T16:46:50.338 Waiting at line 2745
        > WinMain:2013-11-17T16:46:50.448 Waiting at line 2745
        > Port(KPC3Kiss):2013-11-17T16:46:50.557 Missed Expected
        > Response(TS 1) From Command(TC 1!TS 1)
        > Port(KPC3Kiss):2013-11-17T16:46:50.557 Command[6]:TN 2,0
        > Port(KPC3Kiss):2013-11-17T16:46:50.557 Output[7]:TN 2,0<0D>
        > WinMain:2013-11-17T16:46:50.557 Waiting at line 2745
        > Port(KPC3Kiss):2013-11-17T16:46:50.619 CmdResp[21]:TN 2,0<0D>
        > $<0D>EH?<0D>cmd:
        > Port(KPC3Kiss):2013-11-17T16:46:50.635 Reader Exiting
        >
      • k7mt
        Hi Mike, What file do I change to get to get ini kiss then restart?? ... To put a KPC3 v5.0 into KISS, the command is INT KISS RESTART Not Kiss ON, Restart.
        Message 3 of 6 , Nov 17, 2013

           

          Hi Mike,  What file do I change to get to get ini kiss then restart??


          ---In aprsisce@yahoogroups.com, <mike.kc9doa@...> wrote:

          To put a KPC3 v5.0 into KISS, the command is
          INT KISS
          RESTART

          Not Kiss ON, Restart.
          73
          Mike kc9doa

          On 17 Nov 2013 at 9:02, k7mt@... wrote:

          > Hi gang,
          >
          > I set up my KPC3 Version 5.0 and initialized it using Kiss
          > etc. It transmits ok but will no receive any traffic although I
          > am watching traffice come in on other radio/tnc. Here is my
          > Log. Do I require an update to the KPC3 from version 5.0??
          >
          > WinMain:2013-11-17T16:44:36.713 Starting Port(KPC3Kiss)
          > Port(KPC3Kiss):2013-11-17T16:44:36.713 CpReader Running on
          > COM1:9600,N,8,1 (6 OpenCmds, 4 CloseCmds)
          > Port(KPC3Kiss):2013-11-17T16:44:36.713 Opening
          > COM1:9600,N,8,1
          > Port(KPC3Kiss):2013-11-17T16:44:36.713 Opening COM1 with 4
          > Args
          > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:Packet Length 64
          > Version 2
          > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:ServiceMask 0x1
          > Reserved1 0x0
          > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:MaxQueue Tx 0 Rx 0
          > Baud 268435456
          > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:Provider SubType 1
          > Capabilities 0xFF
          > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:Settable Params 127
          > Baud 0x1006FFFF Data 0xF StopParity 0x1F07
          > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:Current Queue Tx 0
          > Rx 4096
          > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:Provider Specifics
          > 0x0 0x0
          > Port(KPC3Kiss):2013-11-17T16:44:36.713 CpOpen:Port COM1
          > 9600,N,8,1 !CTSFlow !DSRFlow !OutXon(2048) !InXoff(512)
          > DTR_ENABLE !DSRSense RTS_ENABLE
          > Port(KPC3Kiss):2013-11-17T16:44:36.713 Opened COM1:9600,N,8,1,
          > Flushing 0 in TransmitQueue, Sending 6 OpenCmds
          > Port(KPC3Kiss):2013-11-17T16:44:36.713 Command[3]:^M~
          > Port(KPC3Kiss):2013-11-17T16:44:36.713 Output[1]:<0D>
          > Port(KPC3Kiss):2013-11-17T16:44:36.760 CmdResp[5]:<0D>cmd:
          > Port(KPC3Kiss):2013-11-17T16:44:36.760 Command[3]:^M~
          > Port(KPC3Kiss):2013-11-17T16:44:36.760 Output[1]:<0D>
          > Port(KPC3Kiss):2013-11-17T16:44:36.807 CmdResp[5]:<0D>cmd:
          > Port(KPC3Kiss):2013-11-17T16:44:36.807 Command[9]:XFLOW OFF
          > Port(KPC3Kiss):2013-11-17T16:44:36.807 Output[10]:XFLOW
          > OFF<0D>
          > Port(KPC3Kiss):2013-11-17T16:44:36.901 CmdResp[52]:XFLOW
          > OFF<0D>Command not available in NEWUSER mode<0D>cmd:
          > Port(KPC3Kiss):2013-11-17T16:44:36.901 Command[11]:FULLDUP
          > OFF
          > Port(KPC3Kiss):2013-11-17T16:44:36.901 Output[12]:FULLDUP
          > OFF<0D>
          > Port(KPC3Kiss):2013-11-17T16:44:36.994 CmdResp[54]:FULLDUP
          > OFF<0D>Command not available in NEWUSER mode<0D>cmd:
          > Port(KPC3Kiss):2013-11-17T16:44:36.994 Command[7]:KISS ON
          > Port(KPC3Kiss):2013-11-17T16:44:36.994 Output[8]:KISS ON<0D>
          > Port(KPC3Kiss):2013-11-17T16:44:37.057 CmdResp[22]:KISS ON<0D>
          > $<0D>EH?<0D>cmd:
          > Port(KPC3Kiss):2013-11-17T16:44:37.057 Command[7]:RESTART
          > Port(KPC3Kiss):2013-11-17T16:44:37.057 Output[8]:RESTART<0D>
          > Port(KPC3Kiss):2013-11-17T16:44:37.448 KISS:Missing Leading
          > C0[22]:RESTART<0D> $<0D>EH?<0D>cmd:
          > Port(KPC3Kiss):2013-11-17T16:44:48.088 KISS:Missing Leading
          > C0[85]:N0WPS>APU25N,POINT6,WIDE1,MACPAS*,WIDE2:
          > <UI>:=4731.29N/11413.51W_Ronan MT {UIV32N}<0D 0D>
          > Port(KPC3Kiss):2013-11-17T16:44:58.276 KISS:Missing Leading
          > C0[107]:GOLDCR>APN391,MACPAS*,WIDE2-1:
          > <UI>:@171729z4632.33N/11254.27W_274/022g029t027r000p000P000h84b
          > 10133.DsVP<0D 0A 0D>
          > Port(KPC3Kiss):2013-11-17T16:45:07.166 KISS:Missing Leading
          > C0[102]:AB6VJ>T6QQTV,POINT6,WIDE1,MACPAS*,WIDE2:
          > <UI>:`*a=l!5k/'"@1}Don't follow me, I'm
          > lost!|"g%I'T|!wS_!|3<0D>
          > Port(KPC3Kiss):2013-11-17T16:45:32.932 KISS:Missing Leading
          > C0[98]:W7PG-7>APOTC1,W7HAV-5,W7ECA-10,MACPAS*,WIDE3:
          > <UI>:!4734.13N/10656.47W_358/000g000t024P000h91OD1w<0D>
          > Port(KPC3Kiss):2013-11-17T16:46:10.182 KISS:Missing Leading
          > C0[76]:AB6VJ>T6QQTV,POINT6,WIDE1,MACPAS*,WIDE2:
          > <UI>:`*a=l!5k/'"@1}|"h%J'U|!wS_!|3<0D>
          > Port(KPC3Kiss):2013-11-17T16:46:13.557 KISS:Missing Leading
          > C0[126]:KB7STN>APNW01,W7SWT-11,MACPAS*,WIDE2:
          > <UI>:@171646z4852.94N/11155.08W_340/000g000t010r000p000P000h88b
          > 10137Davis Vantage Pro2 <0D>
          > WinMain:2013-11-17T16:46:49.244 Stopping Port(KPC3Kiss)
          > WinMain:2013-11-17T16:46:49.244 Waiting at line 675
          > WinMain:2013-11-17T16:46:49.354 Waiting at line 675
          > WinMain:2013-11-17T16:46:49.463 Waiting at line 675
          > Port(KPC3Kiss):2013-11-17T16:46:49.494 Terminating after 36255
          > msec vs 62000 Quiet
          > Port(KPC3Kiss):2013-11-17T16:46:49.494 Closing
          > COM1:9600,N,8,1
          > Port(KPC3Kiss):2013-11-17T16:46:49.494
          > Command[13]:^192^255^192~
          > Port(KPC3Kiss):2013-11-17T16:46:49.494 Output[3]:<C0 FF C0>
          > Port(KPC3Kiss):2013-11-17T16:46:49.494 Command[7]:^C^C^C~
          > Port(KPC3Kiss):2013-11-17T16:46:49.494 Output[3]:<03 03 03>
          > Port(KPC3Kiss):2013-11-17T16:46:49.494 Command[4]:TC 1
          > Port(KPC3Kiss):2013-11-17T16:46:49.494 Output[5]:TC 1<0D>
          > Port(KPC3Kiss):2013-11-17T16:46:49.557 CmdResp[22]:<C0 FF C0>TC
          > 1<0D> $<0D>EH?<0D>cmd:
          > WinMain:2013-11-17T16:46:49.573 Waiting at line 2745
          > WinMain:2013-11-17T16:46:49.682 Waiting at line 2745
          > WinMain:2013-11-17T16:46:49.791 Waiting at line 2745
          > WinMain:2013-11-17T16:46:49.901 Waiting at line 2745
          > WinMain:2013-11-17T16:46:50.010 Waiting at line 2745
          > WinMain:2013-11-17T16:46:50.119 Waiting at line 2745
          > WinMain:2013-11-17T16:46:50.229 Waiting at line 2745
          > WinMain:2013-11-17T16:46:50.338 Waiting at line 2745
          > WinMain:2013-11-17T16:46:50.448 Waiting at line 2745
          > Port(KPC3Kiss):2013-11-17T16:46:50.557 Missed Expected
          > Response(TS 1) From Command(TC 1!TS 1)
          > Port(KPC3Kiss):2013-11-17T16:46:50.557 Command[6]:TN 2,0
          > Port(KPC3Kiss):2013-11-17T16:46:50.557 Output[7]:TN 2,0<0D>
          > WinMain:2013-11-17T16:46:50.557 Waiting at line 2745
          > Port(KPC3Kiss):2013-11-17T16:46:50.619 CmdResp[21]:TN 2,0<0D>
          > $<0D>EH?<0D>cmd:
          > Port(KPC3Kiss):2013-11-17T16:46:50.635 Reader Exiting
          >
        • Mike Miller
          Unfortunately, I don t have a clue. I just noticed the obsolete command. Maybe some where in the TNC selection. I see version 2 mentioned and version 3 of the
          Message 4 of 6 , Nov 17, 2013
            Unfortunately, I don't have a clue. I just noticed the obsolete
            command. Maybe some where in the TNC selection. I see version 2
            mentioned and version 3 of the KPC3 firmware is where the kiss
            command changed. I tried aprsisce and went back to good old
            UI-View. Smaller footprint and does what I need.

            73
            Mike kc9doa

            On 17 Nov 2013 at 9:24, k7mt@... wrote:

            >
            > Hi Mike, What file do I change to get to get ini kiss then
            > restart??
            >
            >
            > ---In aprsisce@yahoogroups.com, <mike.kc9doa@...> wrote:
            >
            >
            > To put a KPC3 v5.0 into KISS, the command is
            > INT KISS
            > RESTART
            >
            > Not Kiss ON, Restart.
            > 73
            > Mike kc9doa
            >
            > On 17 Nov 2013 at 9:02, k7mt@... mailto:k7mt@... wrote:
            >
            > > Hi gang,
            > >
            > > I set up my KPC3 Version 5.0 and initialized it using Kiss
            > > etc. It transmits ok but will no receive any traffic although
            > I
            > > am watching traffice come in on other radio/tnc. Here is my
            > > Log. Do I require an update to the KPC3 from version 5.0??
            > >
            > > WinMain:2013-11-17T16:44:36.713 Starting Port(KPC3Kiss)
            > > Port(KPC3Kiss):2013-11-17T16:44:36.713 CpReader Running on
            > > COM1:9600,N,8,1 (6 OpenCmds, 4 CloseCmds)
            > > Port(KPC3Kiss):2013-11-17T16:44:36.713 Opening
            > > COM1:9600,N,8,1
            > > Port(KPC3Kiss):2013-11-17T16:44:36.713 Opening COM1 with 4
            > > Args
            > > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:Packet Length
            > 64
            > > Version 2
            > > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:ServiceMask 0x1
            > > Reserved1 0x0
            > > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:MaxQueue Tx 0 Rx
            > 0
            > > Baud 268435456
            > > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:Provider SubType
            > 1
            > > Capabilities 0xFF
            > > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:Settable Params
            > 127
            > > Baud 0x1006FFFF Data 0xF StopParity 0x1F07
            > > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:Current Queue Tx
            > 0
            > > Rx 4096
            > > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:Provider
            > Specifics
            > > 0x0 0x0
            > > Port(KPC3Kiss):2013-11-17T16:44:36.713 CpOpen:Port COM1
            > > 9600,N,8,1 !CTSFlow !DSRFlow !OutXon(2048) !InXoff(512)
            > > DTR_ENABLE !DSRSense RTS_ENABLE
            > > Port(KPC3Kiss):2013-11-17T16:44:36.713 Opened
            > COM1:9600,N,8,1,
            > > Flushing 0 in TransmitQueue, Sending 6 OpenCmds
            > > Port(KPC3Kiss):2013-11-17T16:44:36.713 Command[3]:^M~
            > > Port(KPC3Kiss):2013-11-17T16:44:36.713 Output[1]:<0D>
            > > Port(KPC3Kiss):2013-11-17T16:44:36.760 CmdResp[5]:<0D>cmd:
            > > Port(KPC3Kiss):2013-11-17T16:44:36.760 Command[3]:^M~
            > > Port(KPC3Kiss):2013-11-17T16:44:36.760 Output[1]:<0D>
            > > Port(KPC3Kiss):2013-11-17T16:44:36.807 CmdResp[5]:<0D>cmd:
            > > Port(KPC3Kiss):2013-11-17T16:44:36.807 Command[9]:XFLOW OFF
            > > Port(KPC3Kiss):2013-11-17T16:44:36.807 Output[10]:XFLOW
            > > OFF<0D>
            > > Port(KPC3Kiss):2013-11-17T16:44:36.901 CmdResp[52]:XFLOW
            > > OFF<0D>Command not available in NEWUSER mode<0D>cmd:
            > > Port(KPC3Kiss):2013-11-17T16:44:36.901 Command[11]:FULLDUP
            > > OFF
            > > Port(KPC3Kiss):2013-11-17T16:44:36.901 Output[12]:FULLDUP
            > > OFF<0D>
            > > Port(KPC3Kiss):2013-11-17T16:44:36.994 CmdResp[54]:FULLDUP
            > > OFF<0D>Command not available in NEWUSER mode<0D>cmd:
            > > Port(KPC3Kiss):2013-11-17T16:44:36.994 Command[7]:KISS ON
            > > Port(KPC3Kiss):2013-11-17T16:44:36.994 Output[8]:KISS
            > ON<0D>
            > > Port(KPC3Kiss):2013-11-17T16:44:37.057 CmdResp[22]:KISS
            > ON<0D>
            > > $<0D>EH?<0D>cmd:
            > > Port(KPC3Kiss):2013-11-17T16:44:37.057 Command[7]:RESTART
            > > Port(KPC3Kiss):2013-11-17T16:44:37.057
            > Output[8]:RESTART<0D>
            > > Port(KPC3Kiss):2013-11-17T16:44:37.448 KISS:Missing Leading
            > > C0[22]:RESTART<0D> $<0D>EH?<0D>cmd:
            > > Port(KPC3Kiss):2013-11-17T16:44:48.088 KISS:Missing Leading
            > > C0[85]:N0WPS>APU25N,POINT6,WIDE1,MACPAS*,WIDE2:
            > > <UI>:=4731.29N/11413.51W_Ronan MT {UIV32N}<0D 0D>
            > > Port(KPC3Kiss):2013-11-17T16:44:58.276 KISS:Missing Leading
            > > C0[107]:GOLDCR>APN391,MACPAS*,WIDE2-1:
            > >
            > <UI>:@171729z4632.33N/11254.27W_274/022g029t027r000p000P000h84b
            > > 10133.DsVP<0D 0A 0D>
            > > Port(KPC3Kiss):2013-11-17T16:45:07.166 KISS:Missing Leading
            > > C0[102]:AB6VJ>T6QQTV,POINT6,WIDE1,MACPAS*,WIDE2:
            > > <UI>:`*a=l!5k/'"@1}Don't follow me, I'm
            > > lost!|"g%I'T|!wS_!|3<0D>
            > > Port(KPC3Kiss):2013-11-17T16:45:32.932 KISS:Missing Leading
            > > C0[98]:W7PG-7>APOTC1,W7HAV-5,W7ECA-10,MACPAS*,WIDE3:
            > > <UI>:!4734.13N/10656.47W_358/000g000t024P000h91OD1w<0D>
            > > Port(KPC3Kiss):2013-11-17T16:46:10.182 KISS:Missing Leading
            > > C0[76]:AB6VJ>T6QQTV,POINT6,WIDE1,MACPAS*,WIDE2:
            > > <UI>:`*a=l!5k/'"@1}|"h%J'U|!wS_!|3<0D>
            > > Port(KPC3Kiss):2013-11-17T16:46:13.557 KISS:Missing Leading
            > > C0[126]:KB7STN>APNW01,W7SWT-11,MACPAS*,WIDE2:
            > >
            > <UI>:@171646z4852.94N/11155.08W_340/000g000t010r000p000P000h88b
            > > 10137Davis Vantage Pro2 <0D>
            > > WinMain:2013-11-17T16:46:49.244 Stopping Port(KPC3Kiss)
            > > WinMain:2013-11-17T16:46:49.244 Waiting at line 675
            > > WinMain:2013-11-17T16:46:49.354 Waiting at line 675
            > > WinMain:2013-11-17T16:46:49.463 Waiting at line 675
            > > Port(KPC3Kiss):2013-11-17T16:46:49.494 Terminating after
            > 36255
            > > msec vs 62000 Quiet
            > > Port(KPC3Kiss):2013-11-17T16:46:49.494 Closing
            > > COM1:9600,N,8,1
            > > Port(KPC3Kiss):2013-11-17T16:46:49.494
            > > Command[13]:^192^255^192~
            > > Port(KPC3Kiss):2013-11-17T16:46:49.494 Output[3]:<C0 FF C0>
            > > Port(KPC3Kiss):2013-11-17T16:46:49.494 Command[7]:^C^C^C~
            > > Port(KPC3Kiss):2013-11-17T16:46:49.494 Output[3]:<03 03 03>
            > > Port(KPC3Kiss):2013-11-17T16:46:49.494 Command[4]:TC 1
            > > Port(KPC3Kiss):2013-11-17T16:46:49.494 Output[5]:TC 1<0D>
            > > Port(KPC3Kiss):2013-11-17T16:46:49.557 CmdResp[22]:<C0 FF
            > C0>TC
            > > 1<0D> $<0D>EH?<0D>cmd:
            > > WinMain:2013-11-17T16:46:49.573 Waiting at line 2745
            > > WinMain:2013-11-17T16:46:49.682 Waiting at line 2745
            > > WinMain:2013-11-17T16:46:49.791 Waiting at line 2745
            > > WinMain:2013-11-17T16:46:49.901 Waiting at line 2745
            > > WinMain:2013-11-17T16:46:50.010 Waiting at line 2745
            > > WinMain:2013-11-17T16:46:50.119 Waiting at line 2745
            > > WinMain:2013-11-17T16:46:50.229 Waiting at line 2745
            > > WinMain:2013-11-17T16:46:50.338 Waiting at line 2745
            > > WinMain:2013-11-17T16:46:50.448 Waiting at line 2745
            > > Port(KPC3Kiss):2013-11-17T16:46:50.557 Missed Expected
            > > Response(TS 1) From Command(TC 1!TS 1)
            > > Port(KPC3Kiss):2013-11-17T16:46:50.557 Command[6]:TN 2,0
            > > Port(KPC3Kiss):2013-11-17T16:46:50.557 Output[7]:TN 2,0<0D>
            > > WinMain:2013-11-17T16:46:50.557 Waiting at line 2745
            > > Port(KPC3Kiss):2013-11-17T16:46:50.619 CmdResp[21]:TN 2,0<0D>
            > > $<0D>EH?<0D>cmd:
            > > Port(KPC3Kiss):2013-11-17T16:46:50.635 Reader Exiting
            > >
          • Steve Daniels
            You need to edit the aprsis32.xml file. http://aprsisce.wikidot.com/doc:editing-xml-configuration and edit the open and close command section
            Message 5 of 6 , Nov 17, 2013

              You need to edit the aprsis32.xml file.

              http://aprsisce.wikidot.com/doc:editing-xml-configuration

              and edit the open and close command section

              http://aprsisce.wikidot.com/doc:openclosecmd

               aprsisce32 creates a TNC2 compatible open and close command section when you create a KISS port (a simply KISS port does not create the section)

               

              Steve Daniels

              Amateur Radio Callsign G6UIM

              Torbay Freecycle  Owner

              http://uk.groups.yahoo.com/group/torbay_freecycle

              APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com

               


              From: aprsisce@yahoogroups.com [mailto: aprsisce@yahoogroups.com ] On Behalf Of Mike M iller
              Sent: 17 November 2013 17:50
              To: aprsisce@yahoogroups.com
              Subject: Re: [aprsisce] KPC-3 Version 5.0 No receive

               

               

              Unfortunately, I don't have a clue. I just noticed the obsolete
              command. Maybe some where in the TNC selection. I see version 2
              mentioned and version 3 of the KPC3 firmware is where the kiss
              command changed. I tried aprsisce and went back to good old
              UI-View. Smaller footprint and does what I need.

              73
              Mike kc9doa

              On 17 Nov 2013 at 9:24, k7mt@... wrote:

              >
              > Hi Mike, What file do I change to get to get ini kiss then
              > restart??
              >
              >
              > ---In aprsisce@yahoogroups.com ,
              <mike.kc9doa@...> wrote:
              >
              >
              > To put a KPC3 v5.0 into KISS, the command is
              > INT KISS
              > RESTART
              >
              > Not Kiss
              w:st="on">ON , Restart.
              > 73
              > Mike kc9doa
              >
              > On 17 Nov 2013 at 9:02, k7mt@... mailto:k7mt@... wrote:
              >
              > > Hi gang,
              > >
              > > I set up my KPC3 Version 5.0 and initialized it using Kiss
              > > etc. It transmits ok but will no receive any traffic although
              > I
              > > am watching traffice come in on other radio/tnc. Here is my
              > > Log. Do I require an update to the KPC3 from version 5.0??
              > >
              > > WinMain:2013-11-17T16:44:36.713 Starting Port(KPC3Kiss)
              > > Port(KPC3Kiss):2013-11-17T16:44:36.713 CpReader Running on
              > > COM1:9600,N,8,1 (6 OpenCmds, 4 CloseCmds)
              > > Port(KPC3Kiss):2013-11-17T16:44:36.713 Opening
              > > COM1:9600,N,8,1
              > > Port(KPC3Kiss):2013-11-17T16:44:36.713 Opening COM1 with 4
              > > Args
              > > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:Packet Length
              > 64
              > > Version 2
              > > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:ServiceMask 0x1
              > > Reserved1 0x0
              > > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:
              w:st="on">MaxQueue Tx 0 Rx
              > 0
              > > Baud 268435456
              > > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:Provider SubType
              > 1
              > > Capabilities 0xFF
              > > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:Settable Params
              > 127
              > > Baud 0x1006FFFF Data 0xF StopParity 0x1F07
              > > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:Current
              w:st="on">Queue Tx
              > 0
              > > Rx 4096
              > > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:Provider
              > Specifics
              > > 0x0 0x0
              > > Port(KPC3Kiss):2013-11-17T16:44:36.713 CpOpen:Port COM1
              > > 9600,N,8,1 !CTSFlow !DSRFlow !OutXon(2048) !InXoff(512)
              > > DTR_ENABLE !DSRSense RTS_ENABLE
              > > Port(KPC3Kiss):2013-11-17T16:44:36.713 Opened
              > COM1:9600,N,8,1,
              > > Flushing 0 in TransmitQueue, Sending
              6 OpenCmds
              > > Port(KPC3Kiss):2013-11-17T16:44:36.713 Command[3]:^M~
              > > Port(KPC3Kiss):2013-11-17T16:44:36.713 Output[1]:<0D>
              > > Port(KPC3Kiss):2013-11-17T16:44:36.760 CmdResp[5]:<0D>cmd:
              > > Port(KPC3Kiss):2013-11-17T16:44:36.760 Command[3]:^M~
              > > Port(KPC3Kiss):2013-11-17T16:44:36.760 Output[1]:<0D>
              > > Port(KPC3Kiss):2013-11-17T16:44:36.807 CmdResp[5]:<0D>cmd:
              > > Port(KPC3Kiss):2013-11-17T16:44:36.807 Command[9]:XFLOW OFF
              > > Port(KPC3Kiss):2013-11-17T16:44:36.807 Output[10]:XFLOW
              > > OFF<0D>
              > > Port(KPC3Kiss):2013-11-17T16:44:36.901 CmdResp[52]:XFLOW
              > > OFF<0D>Command not available in NEWUSER mode<0D>cmd:
              > > Port(KPC3Kiss):2013-11-17T16:44:36.901 Command[11]:FULLDUP
              > > OFF
              > > Port(KPC3Kiss):2013-11-17T16:44:36.901 Output[12]:FULLDUP
              > > OFF<0D>
              > > Port(KPC3Kiss):2013-11-17T16:44:36.994 CmdResp[54]:FULLDUP
              > > OFF<0D>Command not available in NEWUSER mode<0D>cmd:
              > > Port(KPC3Kiss):2013-11-17T16:44:36.994 Command[7]:KISS ON
              > > Port(KPC3Kiss):2013-11-17T16:44:36.994 Output[8]:KISS
              > ON<0D>
              > > Port(KPC3Kiss):2013-11-17T16:44:37.057 CmdResp[22]:KISS
              > ON<0D>
              > > $<0D>EH?<0D>cmd:
              > > Port(KPC3Kiss):2013-11-17T16:44:37.057 Command[7]:RESTART
              > > Port(KPC3Kiss):2013-11-17T16:44:37.057
              > Output[8]:RESTART<0D>
              > > Port(KPC3Kiss):2013-11-17T16:44:37.448 KISS:Missing Leading
              > > C0[22]:RESTART<0D> $<0D>EH?<0D>cmd:
              > > Port(KPC3Kiss):2013-11-17T16:44:48.088 KISS:Missing Leading
              > > C0[85]:N0WPS>APU25N,POINT6,WIDE1,MACPAS*,WIDE2:
              > > <UI>:=4731.29N/11413.51W_Ronan MT {UIV32N}<0D 0D>
              > > Port(KPC3Kiss):2013-11-17T16:44:58.276 KISS:Missing Leading
              > > C0[107]:GOLDCR>APN391,MACPAS*,WIDE2-1:
              > >
              > <UI>:@171729z4632.33N/11254.27W_274/022g029t027r000p000P000h84b
              > > 10133.DsVP<0D 0A 0D>
              > > Port(KPC3Kiss):2013-11-17T16:45:07.166 KISS:Missing Leading
              > > C0[102]:AB6VJ>T6QQTV,POINT6,WIDE1,MACPAS*,WIDE2:
              > > <UI>:`*a=l!5k/'"@1}Don't follow me, I'm
              > > lost!|"g%I'T|!wS_!|3<0D>
              > > Port(KPC3Kiss):2013-11-17T16:45:32.932 KISS:Missing Leading
              > > C0[98]:W7PG-7>APOTC1,W7HAV-5,W7ECA-10,MACPAS*,WIDE3:
              > > <UI>:!4734.13N/10656.47W_358/000g000t024P000h91OD1w<0D>
              > > Port(KPC3Kiss):2013-11-17T16:46:10.182 KISS:Missing Leading
              > > C0[76]:AB6VJ>T6QQTV,POINT6,WIDE1,MACPAS*,WIDE2:
              > > <UI>:`*a=l!5k/'"@1}|"h%J'U|!wS_!|3<0D>
              > > Port(KPC3Kiss):2013-11-17T16:46:13.557 KISS:Missing Leading
              > > C0[126]:KB7STN>APNW01,W7SWT-11,MACPAS*,WIDE2:
              > >
              > <UI>:@171646z4852.94N/11155.08W_340/000g000t010r000p000P000h88b
              > > 10137Davis Vantage Pro2 <0D>
              > > WinMain:2013-11-17T16:46:49.244
              w:st="on">Stopping Port (KPC3Kiss)
              > > WinMain:2013-11-17T16:46:49.244 Waiting at line 675
              > > WinMain:2013-11-17T16:46:49.354 Waiting at line 675
              > > WinMain:2013-11-17T16:46:49.463 Waiting at line 675
              > > Port(KPC3Kiss):2013-11-17T16:46:49.494 Terminating after
              > 36255
              > > msec vs 62000 Quiet
              > > Port(KPC3Kiss):2013-11-17T16:46:49.494 Closing
              > > COM1:9600,N,8,1
              > > Port(KPC3Kiss):2013-11-17T16:46:49.494
              > > Command[13]:^192^255^192~
              > > Port(KPC3Kiss):2013-11-17T16:46:49.494 Output[3]:<C0 FF C0>
              > > Port(KPC3Kiss):2013-11-17T16:46:49.494 Command[7]:^C^C^C~
              > > Port(KPC3Kiss):2013-11-17T16:46:49.494 Output[3]:<03 03 03>
              > > Port(KPC3Kiss):2013-11-17T16:46:49.494 Command[4]:TC 1
              > > Port(KPC3Kiss):2013-11-17T16:46:49.494 Output[5]:TC 1<0D>
              > > Port(KPC3Kiss):2013-11-17T16:46:49.557 CmdResp[22]:<C0 FF
              > C0>TC
              > > 1<0D> $<0D>EH?<0D>cmd:
              > > WinMain:2013-11-17T16:46:49.573 Waiting at line 2745
              > > WinMain:2013-11-17T16:46:49.682 Waiting at line 2745
              > > WinMain:2013-11-17T16:46:49.791 Waiting at line 2745
              > > WinMain:2013-11-17T16:46:49.901 Waiting at line 2745
              > > WinMain:2013-11-17T16:46:50.010 Waiting at line 2745
              > > WinMain:2013-11-17T16:46:50.119 Waiting at line 2745
              > > WinMain:2013-11-17T16:46:50.229 Waiting at line 2745
              > > WinMain:2013-11-17T16:46:50.338 Waiting at line 2745
              > > WinMain:2013-11-17T16:46:50.448 Waiting at line 2745
              > > Port(KPC3Kiss):2013-11-17T16:46:50.557 Missed Expected
              > > Response(TS 1) From Command(TC 1!TS 1)
              > > Port(KPC3Kiss):2013-11-17T16:46:50.557 Command[6]:TN 2,0
              > > Port(KPC3Kiss):2013-11-17T16:46:50.557 Output[7]:TN 2,0<0D>
              > > WinMain:2013-11-17T16:46:50.557 Waiting at line 2745
              > > Port(KPC3Kiss):2013-11-17T16:46:50.619 CmdResp[21]:TN 2,0<0D>
              > > $<0D>EH?<0D>cmd:
              > > Port(KPC3Kiss):2013-11-17T16:46:50.635 Reader Exiting
              > >

            • k7mt
              Thanks Mike - Yes it it is in the initialization filre for APRSIS for Kiss. I chose KISS for my KPC-3 on the port set up and see that does not work. Presently
              Message 6 of 6 , Nov 17, 2013

                 

                Thanks Mike - Yes it it is in the initialization filre for APRSIS for Kiss. I chose KISS for my KPC-3 on the port set up and see that does not work. Presently I have a Alinco EJ-41U in a DR-135TP and initializing using the KNWD700 KISS as the Alinco TNC is a TASCO same as Kenwood DM-700 built in TNC.  However, it will only work for about a day then it stops receiving and transmitting. I was told that the EJ-41U TNC does have issues with KISS. So, I dug out a old KPC-3 and Alinco DR-1200T and now I canot get that to work in KISS mode with APRSISCE. Some one might be able to help me get the KPC-3 to work as when I helped my friend KG0QR-10 Don in Minnesota Lake, Mn set his up, it worked right off the git go.  Oh well it is a learning experience for sure...
                 
                Bill K7MT Igate Helena, Mt.
                ---In aprsisce@yahoogroups.com, <mike.kc9doa@...> wrote:

                Unfortunately, I don't have a clue. I just noticed the obsolete
                command. Maybe some where in the TNC selection. I see version 2
                mentioned and version 3 of the KPC3 firmware is where the kiss
                command changed. I tried aprsisce and went back to good old
                UI-View. Smaller footprint and does what I need.

                73
                Mike kc9doa

                On 17 Nov 2013 at 9:24, k7mt@... wrote:

                >
                > Hi Mike, What file do I change to get to get ini kiss then
                > restart??
                >
                >
                > ---In aprsisce@yahoogroups.com, <mike.kc9doa@...> wrote:
                >
                >
                > To put a KPC3 v5.0 into KISS, the command is
                > INT KISS
                > RESTART
                >
                > Not Kiss ON, Restart.
                > 73
                > Mike kc9doa
                >
                > On 17 Nov 2013 at 9:02, k7mt@... mailto:k7mt@... wrote:
                >
                > > Hi gang,
                > >
                > > I set up my KPC3 Version 5.0 and initialized it using Kiss
                > > etc. It transmits ok but will no receive any traffic although
                > I
                > > am watching traffice come in on other radio/tnc. Here is my
                > > Log. Do I require an update to the KPC3 from version 5.0??
                > >
                > > WinMain:2013-11-17T16:44:36.713 Starting Port(KPC3Kiss)
                > > Port(KPC3Kiss):2013-11-17T16:44:36.713 CpReader Running on
                > > COM1:9600,N,8,1 (6 OpenCmds, 4 CloseCmds)
                > > Port(KPC3Kiss):2013-11-17T16:44:36.713 Opening
                > > COM1:9600,N,8,1
                > > Port(KPC3Kiss):2013-11-17T16:44:36.713 Opening COM1 with 4
                > > Args
                > > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:Packet Length
                > 64
                > > Version 2
                > > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:ServiceMask 0x1
                > > Reserved1 0x0
                > > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:MaxQueue Tx 0 Rx
                > 0
                > > Baud 268435456
                > > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:Provider SubType
                > 1
                > > Capabilities 0xFF
                > > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:Settable Params
                > 127
                > > Baud 0x1006FFFF Data 0xF StopParity 0x1F07
                > > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:Current Queue Tx
                > 0
                > > Rx 4096
                > > Port(KPC3Kiss):2013-11-17T16:44:36.713 COM1:Provider
                > Specifics
                > > 0x0 0x0
                > > Port(KPC3Kiss):2013-11-17T16:44:36.713 CpOpen:Port COM1
                > > 9600,N,8,1 !CTSFlow !DSRFlow !OutXon(2048) !InXoff(512)
                > > DTR_ENABLE !DSRSense RTS_ENABLE
                > > Port(KPC3Kiss):2013-11-17T16:44:36.713 Opened
                > COM1:9600,N,8,1,
                > > Flushing 0 in TransmitQueue, Sending 6 OpenCmds
                > > Port(KPC3Kiss):2013-11-17T16:44:36.713 Command[3]:^M~
                > > Port(KPC3Kiss):2013-11-17T16:44:36.713 Output[1]:<0D>
                > > Port(KPC3Kiss):2013-11-17T16:44:36.760 CmdResp[5]:<0D>cmd:
                > > Port(KPC3Kiss):2013-11-17T16:44:36.760 Command[3]:^M~
                > > Port(KPC3Kiss):2013-11-17T16:44:36.760 Output[1]:<0D>
                > > Port(KPC3Kiss):2013-11-17T16:44:36.807 CmdResp[5]:<0D>cmd:
                > > Port(KPC3Kiss):2013-11-17T16:44:36.807 Command[9]:XFLOW OFF
                > > Port(KPC3Kiss):2013-11-17T16:44:36.807 Output[10]:XFLOW
                > > OFF<0D>
                > > Port(KPC3Kiss):2013-11-17T16:44:36.901 CmdResp[52]:XFLOW
                > > OFF<0D>Command not available in NEWUSER mode<0D>cmd:
                > > Port(KPC3Kiss):2013-11-17T16:44:36.901 Command[11]:FULLDUP
                > > OFF
                > > Port(KPC3Kiss):2013-11-17T16:44:36.901 Output[12]:FULLDUP
                > > OFF<0D>
                > > Port(KPC3Kiss):2013-11-17T16:44:36.994 CmdResp[54]:FULLDUP
                > > OFF<0D>Command not available in NEWUSER mode<0D>cmd:
                > > Port(KPC3Kiss):2013-11-17T16:44:36.994 Command[7]:KISS ON
                > > Port(KPC3Kiss):2013-11-17T16:44:36.994 Output[8]:KISS
                > ON<0D>
                > > Port(KPC3Kiss):2013-11-17T16:44:37.057 CmdResp[22]:KISS
                > ON<0D>
                > > $<0D>EH?<0D>cmd:
                > > Port(KPC3Kiss):2013-11-17T16:44:37.057 Command[7]:RESTART
                > > Port(KPC3Kiss):2013-11-17T16:44:37.057
                > Output[8]:RESTART<0D>
                > > Port(KPC3Kiss):2013-11-17T16:44:37.448 KISS:Missing Leading
                > > C0[22]:RESTART<0D> $<0D>EH?<0D>cmd:
                > > Port(KPC3Kiss):2013-11-17T16:44:48.088 KISS:Missing Leading
                > > C0[85]:N0WPS>APU25N,POINT6,WIDE1,MACPAS*,WIDE2:
                > > <UI>:=4731.29N/11413.51W_Ronan MT {UIV32N}<0D 0D>
                > > Port(KPC3Kiss):2013-11-17T16:44:58.276 KISS:Missing Leading
                > > C0[107]:GOLDCR>APN391,MACPAS*,WIDE2-1:
                > >
                > <UI>:@171729z4632.33N/11254.27W_274/022g029t027r000p000P000h84b
                > > 10133.DsVP<0D 0A 0D>
                > > Port(KPC3Kiss):2013-11-17T16:45:07.166 KISS:Missing Leading
                > > C0[102]:AB6VJ>T6QQTV,POINT6,WIDE1,MACPAS*,WIDE2:
                > > <UI>:`*a=l!5k/'"@1}Don't follow me, I'm
                > > lost!|"g%I'T|!wS_!|3<0D>
                > > Port(KPC3Kiss):2013-11-17T16:45:32.932 KISS:Missing Leading
                > > C0[98]:W7PG-7>APOTC1,W7HAV-5,W7ECA-10,MACPAS*,WIDE3:
                > > <UI>:!4734.13N/10656.47W_358/000g000t024P000h91OD1w<0D>
                > > Port(KPC3Kiss):2013-11-17T16:46:10.182 KISS:Missing Leading
                > > C0[76]:AB6VJ>T6QQTV,POINT6,WIDE1,MACPAS*,WIDE2:
                > > <UI>:`*a=l!5k/'"@1}|"h%J'U|!wS_!|3<0D>
                > > Port(KPC3Kiss):2013-11-17T16:46:13.557 KISS:Missing Leading
                > > C0[126]:KB7STN>APNW01,W7SWT-11,MACPAS*,WIDE2:
                > >
                > <UI>:@171646z4852.94N/11155.08W_340/000g000t010r000p000P000h88b
                > > 10137Davis Vantage Pro2 <0D>
                > > WinMain:2013-11-17T16:46:49.244 Stopping Port(KPC3Kiss)
                > > WinMain:2013-11-17T16:46:49.244 Waiting at line 675
                > > WinMain:2013-11-17T16:46:49.354 Waiting at line 675
                > > WinMain:2013-11-17T16:46:49.463 Waiting at line 675
                > > Port(KPC3Kiss):2013-11-17T16:46:49.494 Terminating after
                > 36255
                > > msec vs 62000 Quiet
                > > Port(KPC3Kiss):2013-11-17T16:46:49.494 Closing
                > > COM1:9600,N,8,1
                > > Port(KPC3Kiss):2013-11-17T16:46:49.494
                > > Command[13]:^192^255^192~
                > > Port(KPC3Kiss):2013-11-17T16:46:49.494 Output[3]:<C0 FF C0>
                > > Port(KPC3Kiss):2013-11-17T16:46:49.494 Command[7]:^C^C^C~
                > > Port(KPC3Kiss):2013-11-17T16:46:49.494 Output[3]:<03 03 03>
                > > Port(KPC3Kiss):2013-11-17T16:46:49.494 Command[4]:TC 1
                > > Port(KPC3Kiss):2013-11-17T16:46:49.494 Output[5]:TC 1<0D>
                > > Port(KPC3Kiss):2013-11-17T16:46:49.557 CmdResp[22]:<C0 FF
                > C0>TC
                > > 1<0D> $<0D>EH?<0D>cmd:
                > > WinMain:2013-11-17T16:46:49.573 Waiting at line 2745
                > > WinMain:2013-11-17T16:46:49.682 Waiting at line 2745
                > > WinMain:2013-11-17T16:46:49.791 Waiting at line 2745
                > > WinMain:2013-11-17T16:46:49.901 Waiting at line 2745
                > > WinMain:2013-11-17T16:46:50.010 Waiting at line 2745
                > > WinMain:2013-11-17T16:46:50.119 Waiting at line 2745
                > > WinMain:2013-11-17T16:46:50.229 Waiting at line 2745
                > > WinMain:2013-11-17T16:46:50.338 Waiting at line 2745
                > > WinMain:2013-11-17T16:46:50.448 Waiting at line 2745
                > > Port(KPC3Kiss):2013-11-17T16:46:50.557 Missed Expected
                > > Response(TS 1) From Command(TC 1!TS 1)
                > > Port(KPC3Kiss):2013-11-17T16:46:50.557 Command[6]:TN 2,0
                > > Port(KPC3Kiss):2013-11-17T16:46:50.557 Output[7]:TN 2,0<0D>
                > > WinMain:2013-11-17T16:46:50.557 Waiting at line 2745
                > > Port(KPC3Kiss):2013-11-17T16:46:50.619 CmdResp[21]:TN 2,0<0D>
                > > $<0D>EH?<0D>cmd:
                > > Port(KPC3Kiss):2013-11-17T16:46:50.635 Reader Exiting
                > >
              Your message has been successfully submitted and would be delivered to recipients shortly.