Loading ...
Sorry, an error occurred while loading the content.

Station transmits, but not seen on aprs.fi

Expand Messages
  • buck562134987689
    The TNC is a PK-232 connected to a Yaesu 857D. I use this setup with packet and pactor on VHF and HF, with winlink and Packet BBS and P2P, with no problems.
    Message 1 of 1 , Jul 16, 2013
    • 0 Attachment
      The TNC is a PK-232 connected to a Yaesu 857D. I use this setup with packet and pactor on VHF and HF, with winlink and Packet BBS and P2P, with no problems.

      After setting up a port config, APRSISCE puts the TNC into KISS and apparently sends beacons, as shown by this excerpt from the trace port:

      Port(PK232):2013-07-16T14:17:26.508 Command[8]:kiss $01
      Port(PK232):2013-07-16T14:17:26.508 Output[9]:kiss $01<0D>
      Port(PK232):2013-07-16T14:17:26.571 CmdResp[10]:kiss $01<0D 0A>
      Port(PK232):2013-07-16T14:17:59.097 Sent[53]:<C0 00 82 A0 AE AE>b`<E0 96 88>`<A8 B2 A0>`<AE 92 88 8A>b@b<AE 92 88 8A>d@c<03 F0>=3849.93N/10455.86Wl<C0>
      Port(PK232):2013-07-16T14:20:44.763 Sent[54]:<C0 00 82 A0 AE AE>b`<E0 96 88>`<A8 B2 A0>`<AE 92 88 8A>b@b<AE 92 88 8A>d@c<03 F0>>DM78mt/l APRSISCE/32<C0>
      Port(PK232):2013-07-16T14:23:40.292 KISS:NX0G-2>BEACON:Mountain Amateur Radio Club (MARC) PBBS/Node, DM79la. (46)

      I also receive beacons, as from NX0G-2, above.

      Trace transmit shows this:

      2013-07-16T14:17:58.957 Transmit(IS+RF) KD0TYP>APWW10,WIDE1-1,WIDE2-1:=3849.93N/10455.86Wl
      2013-07-16T14:17:58.957 Transmit(INT) KD0TYP>APWW10,WIDE1-1,WIDE2-1:=3849.93N/10455.86Wl
      2013-07-16T14:18:14.541 Transmit(INT) KD0TYP>APWW10,WIDE1-1,WIDE2-1:T#064,093,002,002,500,000,00000000
      2013-07-16T14:20:44.654 Transmit(IS+RF) KD0TYP>APWW10,WIDE1-1,WIDE2-1:>DM78mt/l APRSISCE/32
      2013-07-16T14:21:14.591 Transmit(INT) KD0TYP>APWW10,WIDE1-1,WIDE2-1:T#065,092,002,002,500,000,00000000
      2013-07-16T14:23:14.615 Transmit(INT) KD0TYP>APWW10,WIDE1-1,WIDE2-1:T#066,091,002,002,500,000,00000000
      2013-07-16T14:25:14.642 Transmit(INT) KD0TYP>APWW10,WIDE1-1,WIDE2-1:T#067,090,002,002,500,000,00000000
      2013-07-16T14:28:14.683 Transmit(INT) KD0TYP>APWW10,WIDE1-1,WIDE2-1:T#068,089,002,002,500,000,00000000
      2013-07-16T14:29:14.697 Transmit(INT) KD0TYP>APWW10,WIDE1-1,WIDE2-1:T#069,088,002,002,500,000,00000000
      2013-07-16T14:30:14.706 Transmit(INT) KD0TYP>APWW10,WIDE1-1,WIDE2-1:T#070,087,002,002,500,000,00000000

      I do not have internet access enabled. My question is, if the beacons are going out, why doesn't the station eventually show up on aprs.fi? It appears there only from a week ago, when I had internet access enabled. Thanks for any help.
    Your message has been successfully submitted and would be delivered to recipients shortly.