Re: 2 TNC's Can it work?
- Thanks for the responses.
I will run two instances and see how it works out.
--- In firstname.lastname@example.org, "Lynn W Deffenbaugh (Mr)" <kj4erj@...> wrote:
> Yes. I highly recommend running one instance per RF port with unique
> -SSIDs for each instance.
> While you CAN configure multiple RF ports in a single instance, there
> are some sub-optimal things that may occur. See the following thread in
> Yahoo groups:
> And specifically http://groups.yahoo.com/group/aprsisce/message/22827
> which says:
> > Just be aware that the current APRSISCE/32 doesn't keep track of WHICH
> > port a station was "recently heard local" for gating messages from -IS
> > to RF, just the fact that it WAS recently heard local. So, if a
> > message comes across the APRS-IS for a station that's on UHF, it will
> > be transmitted on both UHF and VHF ports.
> > And there is also no cross-port gating supported in the current
> > incarnation, so messages won't cross between the UHF and VHF ports.
> > Now, if you ran separate instances with an APRS-IS server between
> > them, messages will only go out on the instance/port that heard the
> > station recently local and UHF/VHF cross messages will gate to/from
> > the APRS-IS and manage the cross-band activity properly there as well.
> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
> On 5/16/2013 12:50 PM, Jeremy wrote:
> > Hi All,
> > I would like to set up the home APRS to run a Kantronics TNC on 2M and then an SCS Tracker running RPR on 30 Meters. Is this feasible? Has anyone done something similar?
> > Thanks,
> > 73
> > Jeremy N1ZZZ