Loading ...
Sorry, an error occurred while loading the content.

Re: Kam 9612 Init Help

Expand Messages
  • Jeremy
    Thanks for your help Adam, I got it working after fixing the script. Here is the whole thing that takes it from Terminal mode, puts it into KISS and then back
    Message 1 of 3 , May 13, 2013
    • 0 Attachment
      Thanks for your help Adam,

      I got it working after fixing the script. Here is the whole thing that takes it from Terminal mode, puts it into KISS and then back to Terminal mode: (Of course the name and COM port will vary)

      <!--RFPort[0]-->
      <RFPort Name="KAM">
      <Protocol>KISS</Protocol>
      <Device>COM4:9600,N,8,1</Device>
      <RfBaud>1200</RfBaud>
      <OpenCmd>^M~</OpenCmd>
      <OpenCmd>^M~</OpenCmd>
      <OpenCmd>XFLOW ON!!0</OpenCmd>
      <OpenCmd>FULLDUP OFF!!0</OpenCmd>
      <OpenCmd>INT KISS!!0</OpenCmd>
      <OpenCmd>RESET!!0</OpenCmd>
      <CloseCmd>^192^255^192~!!0</CloseCmd>
      <CloseCmd>^C^C^C~!!0</CloseCmd>
      <CloseCmd>TC 1!TS 1</CloseCmd>
      <CloseCmd>TN 2,0!TN 2,0</CloseCmd>
      <QuietTime>0</QuietTime>
      <Enabled>1</Enabled>
      <XmitEnabled>1</XmitEnabled>
      <ProvidesNMEA>0</ProvidesNMEA>
      <RFtoISEnabled>1</RFtoISEnabled>
      <IStoRFEnabled>1</IStoRFEnabled>
      <MyCallNot3rd>0</MyCallNot3rd>
      <BeaconingEnabled>1</BeaconingEnabled>
      <BeaconPath></BeaconPath>
      <BulletinObjectEnabled>0</BulletinObjectEnabled>
      <DXEnabled>0</DXEnabled>
      <DXPath></DXPath>
      <MessagesEnabled>1</MessagesEnabled>
      <MessagePath></MessagePath>
      <TelemetryEnabled>0</TelemetryEnabled>
      <TelemetryPath></TelemetryPath>
      <!--DigiXform-->
      </RFPort>
      <!--RFPort[0]-->



      --- In aprsisce@yahoogroups.com, Adam Mahnke <kc2ant@...> wrote:
      >
      > The TNC has to get locked into KISS mode. As I recall it would keep reverting back to some other mode that wouldn't support APRSIS32 operating it.
      > I don't remember exactly how to do that part.
      > After that I set up the following port.
      > <!--RFPort[0]--><RFPort Name="144.390MHz"><Protocol>KISS</Protocol><Device>COM1:9600,N,8,1</Device><RfBaud>1200</RfBaud><OpenCmd>~!!0</OpenCmd><CloseCmd>~!!0</CloseCmd><QuietTime>0</QuietTime><Enabled>1</Enabled><XmitEnabled>1</XmitEnabled><ProvidesNMEA>0</ProvidesNMEA><RFtoISEnabled>1</RFtoISEnabled><IStoRFEnabled>1</IStoRFEnabled><MyCallNot3rd>0</MyCallNot3rd><BeaconingEnabled>1</BeaconingEnabled><BeaconPath></BeaconPath><BulletinObjectEnabled>1</BulletinObjectEnabled><DXEnabled>1</DXEnabled><DXPath>RFONLY</DXPath><MessagesEnabled>1</MessagesEnabled><MessagePath></MessagePath><TelemetryEnabled>0</TelemetryEnabled><TelemetryPath></TelemetryPath><!--DigiXform--></RFPort><!--RFPort[0]-->
      > This set up has been up and running for a long time with APRSIS32 driving a 9612 in KISS Mode.
      > Good luck,AdamKC2ANT
      > To: aprsisce@yahoogroups.com
      > From: jcaoy@...
      > Date: Mon, 13 May 2013 23:41:33 +0000
      > Subject: [aprsisce] Kam 9612 Init Help
    Your message has been successfully submitted and would be delivered to recipients shortly.