Loading ...
Sorry, an error occurred while loading the content.

Re: [aprsisce] beaconning suspended

Expand Messages
  • Lynn W Deffenbaugh (Mr)
    Uncheck Configure / Beacon / After Transmit. From http://aprsisce.wikidot.com/menu:configure-beacon ... Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows
    Message 1 of 2 , Apr 8, 2013
      Uncheck Configure / Beacon / After Transmit.  From http://aprsisce.wikidot.com/menu:configure-beacon

      After Transmit - In a semi-mobile (not fixed) GPS-less installation, it may be desirable to not transmit a position beacon on initial startup until the last known position can be confirmed and possibly corrected. If this option is checked, APRSISCE/32 will not transmit a position beacon until the Transmit menu option has been manually activated. Given that the Transmit option allows the user to move "ME" to the center of the screen, this allows the actual current position to be verified and/or changed before any position beacons are sent.

      Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

      On 4/8/2013 9:59 AM, Steve Daniels wrote:

      Have a station wanting to setup in Plymouth about 35 miles from me, very much needed since M6AKN went off air.

      However they are saying that beaconing is not working, they get “Beaconing Suspended” not come across that before.

      Anyone have any ideas?


      Steve Daniels

      Amateur Radio Callsign G6UIM

      Torbay Freecycle  Owner


      APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com



    Your message has been successfully submitted and would be delivered to recipients shortly.