Loading ...
Sorry, an error occurred while loading the content.

Re: [aprsisce] Transmit = quick move

Expand Messages
  • Rob Giuliano
    If you have those settings, doesn t the screen re-center when you transmit? If so, why pan the screen first and then transmit?   No!  It leave the screen,
    Message 1 of 21 , Apr 1, 2013
    • 0 Attachment
      If you have those settings, doesn't the screen re-center when you transmit? If so, why pan the screen first and then transmit?
       
      No!  It leave the screen, but transmits the position of "ME" - at least that has been my experience, and I just tried it again.
       
      Robert Giuliano
      KB8RCO


      ---------------------------------------------
      From: Fred Hillhouse <fmhillhouse@...>
      To: aprsisce@yahoogroups.com
      Sent: Monday, April 1, 2013 1:59 PM
      Subject: RE: [aprsisce] Transmit = quick move
       
      If you have those settings, doesn't the screen re-center when you transmit? If so, why pan the screen first and then transmit?
       
      When I am testing a port, I normally am following ME anyway, so a Transmit is fine. I would hate to have messed up and transmitted a different position and then look silly because I had to have someone else find my blunder for me. Not that that ever happens in real life.
       
      It is Fool's Day so I can say "it never happens".
       
      Best regards,
      Fred, N7FMH
       
       
      From: aprsisce@yahoogroups.com [mailto:aprsisce@yahoogroups.com] On Behalf Of Rob Giuliano
      Sent: Monday, April 01, 2013 13:52
      To: aprsisce@yahoogroups.com
      Subject: Re: [aprsisce] Transmit = quick move
       
      In my case, it was to test a new TNC (port) I connected, but didn't want to wait fro the timer to expire.
       
       
      KEY is to have ">Screen >Follow >Me" checked.  Then, even if you move the center, it still transmits your "ME" position.
       
      QUESTION:  Why wouldn't you have ">Screen >Follow >Me" checked, other than a special case?
       
       
      Robert Giuliano
      KB8RCO
      ---------------------------------------------
      From: Lynn W Deffenbaugh (Mr) <kj4erj@...>
      To: aprsisce@yahoogroups.com
      Sent: Monday, April 1, 2013 1:30 PM
      Subject: Re: [aprsisce] Transmit = quick move
       
      Move ME to Center? Yes. Do you really want to move ME? Yes. Did you REALLY mean to move ME? Yes. Moving ME might not be what you want to do, are you SURE? Yes. There is NO recovery for someone that simply clicks Yes on every question. The real question I have is why are you clicking Transmit without the need to move ME? Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32 On 4/1/2013 1:16 PM, Lasse / LA5PPA wrote: > if you don't read carefully what the message box tells you :-) > > Not sure if this is a big problem but when you click on Transmit in the > menubar you get a message "Move ME To Center" if your out of center from > you own position. > > Many people like my self always press Yes and suddenly I was located a > few miles from home. > Maybe an extra "Are you sure you want to move your position" dialog box > could be an idea or remove the function and add location to the > Configure menu ? > > -- > Lasse > > > > > > > > ------------------------------------ > > Yahoo! Groups Links > > > >
    • la5ppa
      It was beacause I wanted to check and see if the TX was ok via my radio, thats all, sorry for asking.
      Message 2 of 21 , Apr 1, 2013
      • 0 Attachment
        It was beacause I wanted to check and see if the TX was ok via my radio, thats all, sorry for asking.

        --- In aprsisce@yahoogroups.com, "Lynn W Deffenbaugh (Mr)" <kj4erj@...> wrote:
        >
        > Move ME to Center? Yes.
        >
        > Do you really want to move ME? Yes.
        >
        > Did you REALLY mean to move ME? Yes.
        >
        > Moving ME might not be what you want to do, are you SURE? Yes.
        >
        > There is NO recovery for someone that simply clicks Yes on every question.
        >
        > The real question I have is why are you clicking Transmit without the
        > need to move ME?
        >
        > Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
        >
        >
        >
        > On 4/1/2013 1:16 PM, Lasse / LA5PPA wrote:
        > > if you don't read carefully what the message box tells you :-)
        > >
        > > Not sure if this is a big problem but when you click on Transmit in the
        > > menubar you get a message "Move ME To Center" if your out of center from
        > > you own position.
        > >
        > > Many people like my self always press Yes and suddenly I was located a
        > > few miles from home.
        > > Maybe an extra "Are you sure you want to move your position" dialog box
        > > could be an idea or remove the function and add location to the
        > > Configure menu ?
        > >
        > > --
        > > Lasse
        > >
        > >
        > >
        > >
        > >
        > >
        > >
        > > ------------------------------------
        > >
        > > Yahoo! Groups Links
        > >
        > >
        > >
        > >
        >
      • Lynn W Deffenbaugh (Mr)
        I didn t mind the question and apologize if you took my response wrongly. I was just trying to point out how confirmations of confirmations tends to be
        Message 3 of 21 , Apr 1, 2013
        • 0 Attachment
          I didn't mind the question and apologize if you took my response
          wrongly. I was just trying to point out how confirmations of
          confirmations tends to be in-effective. At least, that has been my
          experience.

          I hope you consider re-joining the group because it is questions from
          users that can assist me in making APRSISCE/32 better. Sometimes my
          initial response may be negative, but sometimes things can percolate in
          my brain and come out with an alternate solution to a user-initiated issue.

          That's really why I was asking your use of Transmit (which is exactly
          what it is there for) because I was wondering if there was a situation
          where Transmit was necessary more than I was aware of.

          Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

          On 4/1/2013 3:27 PM, la5ppa wrote:
          > It was beacause I wanted to check and see if the TX was ok via my radio, thats all, sorry for asking.
          >
          > --- In aprsisce@yahoogroups.com, "Lynn W Deffenbaugh (Mr)" <kj4erj@...> wrote:
          >> Move ME to Center? Yes.
          >>
          >> Do you really want to move ME? Yes.
          >>
          >> Did you REALLY mean to move ME? Yes.
          >>
          >> Moving ME might not be what you want to do, are you SURE? Yes.
          >>
          >> There is NO recovery for someone that simply clicks Yes on every question.
          >>
          >> The real question I have is why are you clicking Transmit without the
          >> need to move ME?
          >>
          >> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
          >>
          >>
          >>
          >> On 4/1/2013 1:16 PM, Lasse / LA5PPA wrote:
          >>> if you don't read carefully what the message box tells you :-)
          >>>
          >>> Not sure if this is a big problem but when you click on Transmit in the
          >>> menubar you get a message "Move ME To Center" if your out of center from
          >>> you own position.
          >>>
          >>> Many people like my self always press Yes and suddenly I was located a
          >>> few miles from home.
          >>> Maybe an extra "Are you sure you want to move your position" dialog box
          >>> could be an idea or remove the function and add location to the
          >>> Configure menu ?
          >>>
          >>> --
          >>> Lasse
          >>>
          >>>
          >>>
          >>>
          >>>
          >>>
          >>>
          >>> ------------------------------------
          >>>
          >>> Yahoo! Groups Links
          >>>
          >>>
          >>>
          >>>
          >
          >
          >
          > ------------------------------------
          >
          > Yahoo! Groups Links
          >
          >
          >
          >
        • Stephen Atkins
          This is something programmers have been telling users for many years. Always ready the prompt before clicking:) I ve also done this my self so I feel your
          Message 4 of 21 , Apr 1, 2013
          • 0 Attachment

            This is something programmers have been telling users for many years. Always ready the prompt before clicking:)

            I've also done this my self so I feel your pain.

            Stephen
            VE6SU

            On Apr 1, 2013 11:16 AM, "Lasse / LA5PPA" <div.tt14@...> wrote:
             

            if you don't read carefully what the message box tells you :-)

            Not sure if this is a big problem but when you click on Transmit in the
            menubar you get a message "Move ME To Center" if your out of center from
            you own position.

            Many people like my self always press Yes and suddenly I was located a
            few miles from home.
            Maybe an extra "Are you sure you want to move your position" dialog box
            could be an idea or remove the function and add location to the
            Configure menu ?

            --
            Lasse

          • Lynn W Deffenbaugh (Mr)
            ... We ve also be telling people to proof-read e-mails before poking send! ( ...ready the prompt... ? LOL) Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows
            Message 5 of 21 , Apr 1, 2013
            • 0 Attachment
              On 4/1/2013 8:04 PM, Stephen Atkins wrote:
              This is something programmers have been telling users for many years. Always ready the prompt before clicking:)

              We've also be telling people to proof-read e-mails before poking send!  ("...ready the prompt..."? LOL)

              Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

            • Stephen Atkins
              Darn auto correct on my phone must have done that. Thanks for pointing out how dumb I look :) Stephen
              Message 6 of 21 , Apr 2, 2013
              • 0 Attachment
                Darn auto correct on my phone must have done that.  Thanks for pointing out how dumb I look :)

                Stephen


                On Mon, Apr 1, 2013 at 6:25 PM, Lynn W Deffenbaugh (Mr) <kj4erj@...> wrote:
                 

                On 4/1/2013 8:04 PM, Stephen Atkins wrote:
                This is something programmers have been telling users for many years. Always ready the prompt before clicking:)

                We've also be telling people to proof-read e-mails before poking send!  ("...ready the prompt..."? LOL)


                Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32


              • Lynn W Deffenbaugh (Mr)
                I m guilty of not checking completely who I was about to hassle! I really thought that was a post by James and wanted to give him a bit of grief. Never meant
                Message 7 of 21 , Apr 2, 2013
                • 0 Attachment
                  I'm guilty of not checking completely who I was about to hassle!  I really thought that was a post by James and wanted to give him a bit of grief.  Never meant to embarrass anyone other than James!  Please accept my public apology.

                  Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

                  On 4/2/2013 5:55 PM, Stephen Atkins wrote:
                  Darn auto correct on my phone must have done that.  Thanks for pointing out how dumb I look :)

                  Stephen


                  On Mon, Apr 1, 2013 at 6:25 PM, Lynn W Deffenbaugh (Mr) <kj4erj@...> wrote:
                   
                  On 4/1/2013 8:04 PM, Stephen Atkins wrote:
                  This is something programmers have been telling users for many years. Always ready the prompt before clicking:)

                  We've also be telling people to proof-read e-mails before poking send!  ("...ready the prompt..."? LOL)


                  Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32



                • James Ewen
                  ... HA! Saw the VE6S and assumed it must be that loud mouth from Edmonton, huh? Stephen is from a little bit east of here! Stephen, you might need to change
                  Message 8 of 21 , Apr 2, 2013
                  • 0 Attachment
                    On Tue, Apr 2, 2013 at 4:37 PM, Lynn W Deffenbaugh (Mr) <kj4erj@...> wrote:

                    > I'm guilty of not checking completely who I was about to hassle! I really
                    > thought that was a post by James and wanted to give him a bit of grief.
                    > Never meant to embarrass anyone other than James! Please accept my public
                    > apology.

                    HA! Saw the VE6S and assumed it must be that loud mouth from Edmonton,
                    huh? Stephen is from a little bit east of here!

                    Stephen, you might need to change your callsign to disassociate
                    yourself from me! :)

                    --
                    James
                    VE6SRV

                    PS. You must be missing me... I've been unusually quiet for quite a
                    while. I'll really go quiet for a couple weeks here when I go out to a
                    work camp and spend a couple weeks installing 200 radios into trucks.
                    I'm contemplating sneaking a new APRS digipeater into a site where I
                    have to install a new repeater.
                  • Stephen Atkins
                    No problem. I take as well as I give. Back on subject. The original post does raise a problem and one that I have tried to solve in some of my programs also.
                    Message 9 of 21 , Apr 2, 2013
                    • 0 Attachment

                      No problem.  I take as well as I give.

                      Back on subject. The original post does raise a problem and one that I have tried to solve in some of my programs also. Basically it comes down to how many times do you ask "Are you sure?"

                      I'll leave it up to the developers to answer that one. I've always wondered why when I click tx it would want to move to the centre. Most times I just want to send a packet and see whos listening or to check paths.  Just my two cents so take my comments for what they are worth.

                      Stephen

                      P.S. removing the yahoo added text when replying on a tanlet is really hard.

                      On 2013-04-02 4:44 PM, "Lynn W Deffenbaugh (Mr)" <kj4erj@...> wrote:
                       

                      I'm guilty of not checking completely who I was about to hassle!  I really thought that was a post by James and wanted to give him a bit of grief.  Never meant to embarrass anyone other than James!  Please accept my public apology.

                      Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

                      On 4/2/2013 5:55 PM, Stephen Atkins wrote:
                      Darn auto correct on my phone must have done that.  Thanks for pointing out how dumb I look :)

                      Stephen


                      On Mon, Apr 1, 2013 at 6:25 PM, Lynn W Deffenbaugh (Mr) <kj4erj@...> wrote:
                       
                      On 4/1/2013 8:04 PM, Stephen Atkins wrote:
                      This is something programmers have been telling users for many years. Always ready the prompt before clicking:)

                      We've also be telling people to proof-read e-mails before poking send!  ("...ready the prompt..."? LOL)


                      Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32



                    • Lee D Bengston
                      My question is why is there a need to move when clicking transmit? When I was brand new to this program, I had just zoomed in and set my position, zoomed back
                      Message 10 of 21 , Apr 3, 2013
                      • 0 Attachment
                        My question is why is there a need to move when clicking transmit?  When I was brand new to this program, I had just zoomed in and set my position, zoomed back out (and I must have also scrolled the map a bit so that I was not in the center).  Next I clicked transmit simply to try out the capability to transmit on demand, and I got the prompt if it was OK to move ME to the center of the map.  I misunderstood that it meant to center the map around my position, which made more sense to me at the time - after all I had just set a position for a fixed station, so why would I want to move it to wherever the current center of the map was?  Therefore I clicked yes and was moved to the center of the map - oops.

                        Now on a more positive note, I took APRSIS32 in a Netbook on a road trip last fall from Virginia to Wisconsin and back, and it worked great.  The genius beaconing worked well, and pre-fetched map tiles were the best free off-line map solution I could find.  The big speedometer was a nice touch, too.

                        Lee - K5DAT


                        On Mon, Apr 1, 2013 at 1:30 PM, Lynn W Deffenbaugh (Mr) <kj4erj@...> wrote:
                         

                        Move ME to Center? Yes.

                        Do you really want to move ME? Yes.

                        Did you REALLY mean to move ME? Yes.

                        Moving ME might not be what you want to do, are you SURE? Yes.

                        There is NO recovery for someone that simply clicks Yes on every question.

                        The real question I have is why are you clicking Transmit without the
                        need to move ME?

                        Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32



                        On 4/1/2013 1:16 PM, Lasse / LA5PPA wrote:
                        > if you don't read carefully what the message box tells you :-)
                        >
                        > Not sure if this is a big problem but when you click on Transmit in the
                        > menubar you get a message "Move ME To Center" if your out of center from
                        > you own position.
                        >
                        > Many people like my self always press Yes and suddenly I was located a
                        > few miles from home.
                        > Maybe an extra "Are you sure you want to move your position" dialog box
                        > could be an idea or remove the function and add location to the
                        > Configure menu ?
                        >
                        > --
                        > Lasse
                        >


                      • Lynn W Deffenbaugh (Mr)
                        The road trip is actually the reason that there s an easy way to Move ME to Center on the transmit. If you couple it with the Configure / Beacon / After
                        Message 11 of 21 , Apr 3, 2013
                        • 0 Attachment
                          The road trip is actually the reason that there's an easy way to "Move ME to Center" on the transmit.  If you couple it with the Configure / Beacon / After Transmit, you have an excellent APRS solution for the GPS-less netbook.  Each night, you move the map to center on where you've settled in, hit Transmit, and say Yes.  The "After Transmit" selection makes sure that no beacons are sent with your old location when you restart the client until you have had a chance to re-center the map on where ME should be and then manually hit Transmit.

                          IMHO, there's practically no other reason for the Transmit menu option beyond testing, and while testing, just make sure you're centered where you want to be or keep answering No to the question.

                          Maybe I'll just change the menu option to "Move ME" which implies a transmit since your location may have changed...

                          Glad to know the road trip went well.  I also like the (configurably - see Configure / Screen / Speed Font Size) big speedometer.  I trust GPS-based speeds much more than the car speedometer which seem to consistently be incorrect.

                          Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

                          On 4/3/2013 9:18 PM, Lee D Bengston wrote:
                          My question is why is there a need to move when clicking transmit?  When I was brand new to this program, I had just zoomed in and set my position, zoomed back out (and I must have also scrolled the map a bit so that I was not in the center).  Next I clicked transmit simply to try out the capability to transmit on demand, and I got the prompt if it was OK to move ME to the center of the map.  I misunderstood that it meant to center the map around my position, which made more sense to me at the time - after all I had just set a position for a fixed station, so why would I want to move it to wherever the current center of the map was?  Therefore I clicked yes and was moved to the center of the map - oops.

                          Now on a more positive note, I took APRSIS32 in a Netbook on a road trip last fall from Virginia to Wisconsin and back, and it worked great.  The genius beaconing worked well, and pre-fetched map tiles were the best free off-line map solution I could find.  The big speedometer was a nice touch, too.

                          Lee - K5DAT


                          On Mon, Apr 1, 2013 at 1:30 PM, Lynn W Deffenbaugh (Mr) <kj4erj@...> wrote:
                           

                          Move ME to Center? Yes.

                          Do you really want to move ME? Yes.

                          Did you REALLY mean to move ME? Yes.

                          Moving ME might not be what you want to do, are you SURE? Yes.

                          There is NO recovery for someone that simply clicks Yes on every question.

                          The real question I have is why are you clicking Transmit without the
                          need to move ME?

                          Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32



                          On 4/1/2013 1:16 PM, Lasse / LA5PPA wrote:
                          > if you don't read carefully what the message box tells you :-)
                          >
                          > Not sure if this is a big problem but when you click on Transmit in the
                          > menubar you get a message "Move ME To Center" if your out of center from
                          > you own position.
                          >
                          > Many people like my self always press Yes and suddenly I was located a
                          > few miles from home.
                          > Maybe an extra "Are you sure you want to move your position" dialog box
                          > could be an idea or remove the function and add location to the
                          > Configure menu ?
                          >
                          > --
                          > Lasse
                          >



                        • Rob Giuliano
                          Without putting words in Lynn s mouth, I would call it  Fine Tuning . The only time you would hit transmit on a stationary station after moving the map, would
                          Message 12 of 21 , Apr 3, 2013
                          • 0 Attachment
                            Without putting words in Lynn's mouth, I would call it "Fine Tuning".
                            The only time you would hit transmit on a stationary station after moving the map, would be to fine tune your position.
                            I would thing that the move to center is done on transmits for that reason.
                             
                            That is why I turn it off!
                              > Screen >Follow > ME
                            This will transmit the position of ME if you hit transmit, even if the map has been moved.
                             
                             
                             
                            Robert Giuliano
                            KB8RCO


                            ---------------------------------------------
                            From: Lee D Bengston <kilo5dat@...>
                            To: aprsisce@yahoogroups.com
                            Sent: Wednesday, April 3, 2013 9:18 PM
                            Subject: Re: [aprsisce] Transmit = quick move
                             
                            My question is why is there a need to move when clicking transmit?  When I was brand new to this program, I had just zoomed in and set my position, zoomed back out (and I must have also scrolled the map a bit so that I was not in the center).  Next I clicked transmit simply to try out the capability to transmit on demand, and I got the prompt if it was OK to move ME to the center of the map.  I misunderstood that it meant to center the map around my position, which made more sense to me at the time - after all I had just set a position for a fixed station, so why would I want to move it to wherever the current center of the map was?  Therefore I clicked yes and was moved to the center of the map - oops.
                            Now on a more positive note, I took APRSIS32 in a Netbook on a road trip last fall from Virginia to Wisconsin and back, and it worked great.  The genius beaconing worked well, and pre-fetched map tiles were the best free off-line map solution I could find.  The big speedometer was a nice touch, too.
                            Lee - K5DAT
                            On Mon, Apr 1, 2013 at 1:30 PM, Lynn W Deffenbaugh (Mr) <kj4erj@...> wrote:
                             
                            Move ME to Center? Yes.

                            Do you really want to move ME? Yes.

                            Did you REALLY mean to move ME? Yes.

                            Moving ME might not be what you want to do, are you SURE? Yes.

                            There is NO recovery for someone that simply clicks Yes on every question.

                            The real question I have is why are you clicking Transmit without the
                            need to move ME?

                            Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
                            On 4/1/2013 1:16 PM, Lasse / LA5PPA wrote: > if you don't read carefully what the message box tells you :-) > > Not sure if this is a big problem but when you click on Transmit in the > menubar you get a message "Move ME To Center" if your out of center from > you own position. > > Many people like my self always press Yes and suddenly I was located a > few miles from home. > Maybe an extra "Are you sure you want to move your position" dialog box > could be an idea or remove the function and add location to the > Configure menu ? > > -- > Lasse >
                          • Greg Depew
                            I actually like the transmit button for when I switch to the iss and want to see if I can be digied on the lower elevations. KB3KBR Greg Sent from my Droid
                            Message 13 of 21 , Apr 3, 2013
                            • 0 Attachment
                              I actually like the transmit button for when I switch to the iss and want to see if I can be digied on the lower elevations.KB3KBR Greg Sent from my Droid Charge on Verizon 4G LTE


                              -----Original Message-----
                              From: Lynn W Deffenbaugh (Mr)
                              Sent: 4/4/2013 1:54:32 AM
                              To: aprsisce@yahoogroups.com
                              Subject: Re: [aprsisce] Transmit = quick move
                               

                              The road trip is actually the reason that there's an easy way to "Move ME to Center" on the transmit.  If you couple it with the Configure / Beacon / After Transmit, you have an excellent APRS solution for the GPS-less netbook.  Each night, you move the map to center on where you've settled in, hit Transmit, and say Yes.  The "After Transmit" selection makes sure that no beacons are sent with your old location when you restart the client until you have had a chance to re-center the map on where ME should be and then manually hit Transmit.

                              IMHO, there's practically no other reason for the Transmit menu option beyond testing, and while testing, just make sure you're centered where you want to be or keep answering No to the question.

                              Maybe I'll just change the menu option to "Move ME" which implies a transmit since your location may have changed...

                              Glad to know the road trip went well.  I also like the (configurably - see Configure / Screen / Speed Font Size) big speedometer.  I trust GPS-based speeds much more than the car speedometer which seem to consistently be incorrect.

                              Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

                              On 4/3/2013 9:18 PM, Lee D Bengston wrote:
                              My question is why is there a need to move when clicking transmit?  When I was brand new to this program, I had just zoomed in and set my position, zoomed back out (and I must have also scrolled the map a bit so that I was not in the center).  Next I clicked transmit simply to try out the capability to transmit on demand, and I got the prompt if it was OK to move ME to the center of the map.  I misunderstood that it meant to center the map around my position, which made more sense to me at the time - after all I had just set a position for a fixed station, so why would I want to move it to wherever the current center of the map was?  Therefore I clicked yes and was moved to the center of the map - oops.

                              Now on a more positive note, I took APRSIS32 in a Netbook on a road trip last fall from Virginia to Wisconsin and back, and it worked great.  The genius beaconing worked well, and pre-fetched map tiles were the best free off-line map solution I could find.  The big speedometer was a nice touch, too.

                              Lee - K5DAT


                              On Mon, Apr 1, 2013 at 1:30 PM, Lynn W Deffenbaugh (Mr) <kj4erj@...> wrote:
                               

                              Move ME to Center? Yes.

                              Do you really want to move ME? Yes.

                              Did you REALLY mean to move ME? Yes.

                              Moving ME might not be what you want to do, are you SURE? Yes.

                              There is NO recovery for someone that simply clicks Yes on every question.

                              The real question I have is why are you clicking Transmit without the
                              need to move ME?

                              Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32



                              On 4/1/2013 1:16 PM, Lasse / LA5PPA wrote:
                              > if you don't read carefully what the message box tells you :-)
                              >
                              > Not sure if this is a big problem but when you click on Transmit in the
                              > menubar you get a message "Move ME To Center" if your out of center from
                              > you own position.
                              >
                              > Many people like my self always press Yes and suddenly I was located a
                              > few miles from home.
                              > Maybe an extra "Are you sure you want to move your position" dialog box
                              > could be an idea or remove the function and add location to the
                              > Configure menu ?
                              >
                              > --
                              > Lasse
                              >



                            Your message has been successfully submitted and would be delivered to recipients shortly.