Loading ...
Sorry, an error occurred while loading the content.

DSP SoundDoppler Advice

Expand Messages
  • pa3bnx
    Hello EveryBody, Today I bought/used an inexpensive Euro 28 USB soundcard U-Control UCA202 Behringer.com Unfortuality it was not sensive enought It needs about
    Message 1 of 63 , Jan 12, 2013
    • 0 Attachment
      Hello EveryBody,

      Today I bought/used an inexpensive Euro 28

      USB soundcard U-Control UCA202 Behringer.com

      Unfortuality it was not sensive enought
      It needs about 1 Volt eff for the line inputs
      so I build on matrix pcb 2 audio pre amplifliers
      with 1 transisto bc547 in each channel.

      Now I had gain enough.
      These circuit uses about 2 mA at 12 volt.

      The fun is that I can have two SoundDoppler.exe running on
      one PC with two scanners and two antenna arrays.

      And this al displayed on MyMapping.exe

      I found out that it is handy to have more colors arrowpoints
      so I can see on the map and stationairy from wich doppler the arrow came.

      So I have now a red, yellow and magenta arrows.
      Red MyOwn, Yellow MyAlias and other Callsigns Magenta.

      I did also work today on my New Arduino Uno board to
      create a SoundDopplerGenerator with softwitching
      and pre and post decay control signals for the
      switcher diodes.

      So the packet.tx file or df-report
      should have maybe also a setting for the destination field
      like APDF01 APDF02

      It can ofcource also have a callsign alias with a ssid

      Don't now yet how to do that in SoundDoppler.exe.
    • pa3bnx
      Hello EveryBody, Today I bought/used an inexpensive Euro 28 USB soundcard U-Control UCA202 Behringer.com Unfortuality it was not sensive enought It needs about
      Message 63 of 63 , Jan 12, 2013
      • 0 Attachment
        Hello EveryBody,

        Today I bought/used an inexpensive Euro 28

        USB soundcard U-Control UCA202 Behringer.com

        Unfortuality it was not sensive enought
        It needs about 1 Volt eff for the line inputs
        so I build on matrix pcb 2 audio pre amplifliers
        with 1 transisto bc547 in each channel.

        Now I had gain enough.
        These circuit uses about 2 mA at 12 volt.

        The fun is that I can have two SoundDoppler.exe running on
        one PC with two scanners and two antenna arrays.

        And this al displayed on MyMapping.exe

        I found out that it is handy to have more colors arrowpoints
        so I can see on the map and stationairy from wich doppler the arrow came.

        So I have now a red, yellow and magenta arrows.
        Red MyOwn, Yellow MyAlias and other Callsigns Magenta.

        I did also work today on my New Arduino Uno board to
        create a SoundDopplerGenerator with softwitching
        and pre and post decay control signals for the
        switcher diodes.

        So the packet.tx file or df-report
        should have maybe also a setting for the destination field
        like APDF01 APDF02

        It can ofcource also have a callsign alias with a ssid

        Don't now yet how to do that in SoundDoppler.exe.
      Your message has been successfully submitted and would be delivered to recipients shortly.