Loading ...
Sorry, an error occurred while loading the content.

Re: Feature Request

Expand Messages
  • ltdoc
    ... I ve been as fast as the APRS said I was going, but not in a car, and not at ground level. Do a Prnt Scrn and save it, no one will ever believe you
    Message 1 of 69 , Sep 3 5:31 AM
    • 0 Attachment
      :)
      I've been as fast as the APRS said I was going, but not in a car, and not at ground level. Do a 'Prnt Scrn' and save it, no one will ever believe you otherwise...
      - 'Doc
    • Steve
      I just found software that does what I want Habrotate pulls info from the Habitat database and feeds to pstRotator and pstRotator has an APRS option. Have just
      Message 69 of 69 , Jun 29, 2014
      • 0 Attachment

        I just found software that does what I want

        Habrotate pulls info from the Habitat database and feeds to pstRotator and pstRotator has an APRS option.

        Have just paid for pstRotator and waiting for a registration code was only 15 Euro

        When it arrives will test it all out and report back

         

        Still think it would be nice to have in APRSIS32 though

         

        Habrotate

        https://github.com/philcrump/habrotate source

        https://www.philcrump.co.uk/Habrotate Windows compile

         

        pstRotator

        http://www.qsl.net/yo3dmu/index_Page346.htm

         

        Steve

        G6UIM

         


        From: aprsisce@yahoogroups.com [mailto: aprsisce@yahoogroups.com ]
        Sent: 27 June 2014 23:44
        To: aprsisce@yahoogroups.com
        Subject: [aprsisce] Feature Request

         

         

        Just received my rotator control unit an ERC-M unit only got the USB option I do wonder if the Lan option might be handy as well.

        What I would like when Lynn gets the time is the ability to follow a station and have the rotator system track that station.

        For me this is mainly for use with Lynn ’s habitat to APRS system for tracking balloons. But also ships in the channel. But it’s obviously useful for tracking anything moving.

        So whats needed is a rotator port type the usual TCP/IP, USB, Com.

        The software already does bearing so elevation added. Following a station with rotator enabled auto tracks that station.

        My control box uses Yaesu GS232A and B protocols which seem standard across various rotators and software

        Yaesu GS232 A and B

        The only difference in A and B is the format how a position is returned from the ERC

        Note 1): This command was added by the Dual-AZ protocol by VE2DX and used to drive 2 AZ-rotators with a 2-axis interface

        Command to ERC                Description                                            Returned from ERC

        A<cr>                                      Stop rotation azimuth                            <cr>

        B<cr> (in GS232A-mode)      Request position elevation                  +0eee<cr><lf>

        B<cr> (in GS232B-mode)      Request position elevation                  EL=eee<cr><lf>

        C<cr> (in GS232A-mode)     Request position azimuth                     +0aaa<cr><lf>

        C<cr> (in GS232B-mode)     Request position azimuth                     AZ=aaa<cr><lf>

        C2<cr> (in GS232A-mode)   Request position azimuth + elevation +0aaa+0eee<cr><lf>

        C2<cr> (in GS232B-mode)   Request position azimuth + elevation AZ=aaa<s><s>EL=eee<cr><lf>

        D<cr>                                      Rotate DOWN or CCW 2nd axis            <cr>

        E<cr>                                      Stop rotation elevation                         <cr>

        L<cr>                                       Rotate CCW 1st axis                              <cr>

        Maaa<cr>                                Rotate azimuth to aaa                            <cr>

        MBeee<cr>                             1) Rotate elevation to eee                     <cr>

        R<cr>                                      Rotate CW 1st axis                                 <cr>

        S<cr>                                      Stops rotation both axis                       <cr>

        U<cr>                                      Rotate UP or CW 2nd axis                      <cr>

        Waaa eee<cr>                        Rotate azimuth to aaa and Rotate elevation to eee<cr>

         

        I think A,B,C,E,M and MB, I don’t see a need for D,L,R,S,U

         

        Thoughts?

        Steve

        G6UIM

      Your message has been successfully submitted and would be delivered to recipients shortly.