Loading ...
Sorry, an error occurred while loading the content.

Re: [aprsisce] Re: Setting Up Fill - Digi

Expand Messages
  • Lynn W Deffenbaugh (Mr)
    If you could e-mail your APRSIS32.XML file to KJ4ERJ@arrl.net, I ll take a look at it and see if I can figure out the APRS-IS thing. Your RF port is working
    Message 1 of 46 , Feb 1, 2012
      If you could e-mail your APRSIS32.XML file to KJ4ERJ@..., I'll take a look at it and see if I can figure out the APRS-IS thing.

      Your RF port is working and you're connecting to APRS-IS, but not getting a validated connection for some reason.  No need (yet) to blow the config and start all over.

      Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

      On 2/1/2012 6:23 PM, kc2nyu wrote:
      Replies embedded in bold
      --- In aprsisce@yahoogroups.com, James Ewen <ve6srv@...> wrote:
      > On Wed, Feb 1, 2012 at 10:26 AM, kc2nyu eckerpw@... wrote:
      > > I have made APRSIS KC2NYU-1 and AGWTracker KC2NYU-0, but don't plan to turn on AGWTracker
      > Okay... I had a look at aprs.fi for your stations:
      > http://aprs.fi/?call=kc2nyu*
      > Nothing is being sent out from any of your stations that might be
      > currently running. Everything is at least 1 or 2 days old.
      --- I know, I checked also and saw the same bad information. I have had APRSIS32 running since mid-day
      > > > If you leave the program running connected to the APRS-IS stream, then
      > > > we can see some of what you are doing.
      > >
      > > -- Not sure what you mean by "leave prgm connected to APRS-IS stream?
      > > Under Enables I have APRS-IS checked.
      > I mean have APRSISCE/32 running on your computer, with APRS-IS
      > enabled, transmit enabled, and a whole host of other things enabled...
      -- I have APRS-IS enabled, beaconing enabled, internet access enabled, don''t see Transmit in the Enables List
      > I can't remember all the ways you can disable transmitting... Lynn
      > needs to jump in here with the big old checklist. One thing we really
      > haven't touched on yet, is do you have the passcode for the APRS-IS
      > servers?

      ---- I have a passcode inserted
      > Right now, from what we can see, it looks like you haven't had
      > APRSISCE/32 running for nearly 2 days. Lynn has the program set up
      > dead simple for getting you going. Start the program, put your
      > callsign in, point the map at your house and hit transmit. If you put
      > the passcode in, then you can interact with people on RF. Add in a RF
      > port tied into your TNC/radio, and you'll be on the local RF network,
      > acting as an i-gate. Since you wanted to play digipeater, that simple
      > one line addition to the XML would have you going.

      ---- Program is running, Call sign is in, map is pointed at house, Rf port is tied to to TNC and radio and the digipeat line was added.
      -- When I hit Transmit in APRSIS32, The radio goes to TX, but still nt seeing updates in APRS.fi
      > Of course if you've been poking at all kinds of stuff in APRSISCE/32,
      > you might have a lot of things disabled, or otherwise discombobulated!
      > > > You just did it! 8) Do it again! Move the screen so the crosshairs are
      > > > on your desired location, and hit Transmit. You will be asked again if
      > > > you want to move to center, which you should answer Yes to if you want
      > > > to place your station at that location.
      > >
      > > --- Done
      > Okay, you're not getting any transmission out on RF or to the APRS-IS.
      > Your icon is still up by Newington, when your comments and your QRZ
      > page say that you live on Skidaway Island.
      > We're going to have to get you figured out so that you have a program
      > that is actually doing what it is supposed to do. Do you see any
      > stations other than your own on the screen?

      ---- The entire left side of the screen, the scroller is full of stations and is constantly changing
      > I think the easiest way to get you going would be to have you delete
      > the XML config file, and start over again from scratch.

      --- Haven't gone there yet

      73 Paul
      > --
      > James
      > VE6SRV

    • James Ewen
      ... That often leads to a lot of splashing and carrying on as well! Have a look and see what you ve been up to in a little better than a day... 211 packets
      Message 46 of 46 , Feb 2, 2012
        On Thu, Feb 2, 2012 at 8:22 PM, kc2nyu <eckerpw@...> wrote:

        > Sometimes best way to learn is to jump into deep end with all clothes on.

        That often leads to a lot of splashing and carrying on as well!

        Have a look and see what you've been up to in a little better than a
        day... 211 packets gated to the net already.


        You can see that there are users in the area that are making use of your i-gate.

        Now your next task is to see if you can educate your neighbor KW4B
        that a digipeater shouldn't use an outgoing path of WIDE1-1. WIDE1-1
        should only be used by low powered stations that need help getting
        into the local digipeaters. Home stations should never run with
        WIDE1-1 in their path. A digipeater should NEVER need help from a home
        fill-in station. If the digipeater needs help from a home fill-in
        station to be heard, then it really should be turned off. Main
        digipeaters need to be situated where they can hear for a good
        distance around them. Just like a voice repeater, putting a digipeater
        in a spot where it can't hear anything is a waste of time.

        If you look at the packets of KW4B, you can see that with the path he
        is using, it was hit or miss as to whether the packets made it to the
        internet. Once your i-gate came online, the graphs jump up because he
        can get to the internet through your gate.


        This digipeater is using a path of simply WIDE1-1. It should be
        changed to something like WIDE2-1. The same goes for his other
        digipeater KW4B-1. He's currently using a path of WIDE1-1,WIDE2-1 over
        there. The WIDE1-1 needs to go.

        We're getting away from APRSISCE/32 specific things, and really
        wandering into general APRS theory, so it's about time to tie the
        ribbons on this thread.

        Go play with APRSISCE/32, and have a look at all the bells and
        whistles available now that you have gotten started learning the
        basics of APRS operations.

      Your message has been successfully submitted and would be delivered to recipients shortly.