Loading ...
Sorry, an error occurred while loading the content.

Re: [aprsisce] Kenwood 710 (PKT)

Expand Messages
  • Tom
    I aasume I edited it right or I would not be getting anything when I monitor digi. Tom
    Message 1 of 5 , Jan 1, 2012
    • 0 Attachment
      I aasume I edited it right or I would not be getting anything when I monitor digi.
       
      Tom

      On Sun, Jan 1, 2012 at 9:30 AM, <kb8uih@...> wrote:
      If the client APRSISCE is in control, usually the Kenwood should be in
      PAKET mode.  When in APRS mode, the Kenwood is in control.  I am not
      sure what may be happening here.  Maybe Lynn or others may have the
      answer.  Are U sure you edited the right XML file?  I have seen mails
      about the file extensions not showing and u maybe didn't get right file?

      Good Luck.

      Chris

      "I reject your reality and substitute my own."


      On Sun, Jan 1, 2012 at 9:02 AM, Tom - KQ5S wrote:

      > I modified the xml file for digipeating.  When I look at the digi log
      > it says PKT:DigiPeating Not Supported on KWD710(Pkt) Protocol Ports
      >
      > WinMain:2012-01-01T13:56:41.656 Digipeating KQ5S-8 (WIDE1-1)
      > via(WIDE1-1=WIDE1*)
      > WinMain:2012-01-01T13:56:41.656
      > Original(KQ5S-8>ST0P1Y,WIDE1-1,WIDE2-1:`lS&l5wK\>"51}=)
      > WinMain:2012-01-01T13:56:41.656
      > Transmit(KQ5S-8>ST0P1Y,KQ5S-13*,WIDE1*,WIDE2-1:`lS&l5wK\>"51}=)
      > WinMain:2012-01-01T13:56:41.656 710 PKT:DigiPeating Not Supported on
      > KWD710(Pkt) Protocol Ports
      >
      > Does this mean I have to use the 710 in APRS mode?  I prefer having
      > APRSIS/32 be in control.
      >
      > Tom
      > KQ5S
      >
      >
      >
      > ------------------------------------
      >
      > Yahoo! Groups Links
      >
      >
      >


      ------------------------------------

      Yahoo! Groups Links

      <*> To visit your group on the web, go to:
         http://groups.yahoo.com/group/aprsisce/

      <*> Your email settings:
         Individual Email | Traditional

      <*> To change settings online go to:
         http://groups.yahoo.com/group/aprsisce/join
         (Yahoo! ID required)

      <*> To change settings via email:
         aprsisce-digest@yahoogroups.com
         aprsisce-fullfeatured@yahoogroups.com

      <*> To unsubscribe from this group, send an email to:
         aprsisce-unsubscribe@yahoogroups.com

      <*> Your use of Yahoo! Groups is subject to:
         http://docs.yahoo.com/info/terms/


    • Lynn W Deffenbaugh (Mr)
      The KWD710(Pkt) mode keeps the D710 in TNC mode. In this mode, the UNPROTO xxxx VIA yyyy doesn t support transmitting used path elements and therefore is
      Message 2 of 5 , Jan 1, 2012
      • 0 Attachment
        The KWD710(Pkt) mode keeps the D710 in TNC mode. In this mode, the
        UNPROTO xxxx VIA yyyy doesn't support transmitting used path elements
        and therefore is unusable as a digipeater.

        The easiest way to use a D710 as a digipeater is to put it into KISS
        mode and let APRSISCE/32 take full control. The normal KISS type port
        should do that, provided that you have the D710's TNC in Packet mode
        before starting APRSISCE/32 or enabling the port.

        Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

        On 1/1/2012 9:02 AM, Tom - KQ5S wrote:
        > I modified the xml file for digipeating. When I look at the digi log it says PKT:DigiPeating Not Supported on KWD710(Pkt) Protocol Ports
        >
        > WinMain:2012-01-01T13:56:41.656 Digipeating KQ5S-8 (WIDE1-1) via(WIDE1-1=WIDE1*)
        > WinMain:2012-01-01T13:56:41.656 Original(KQ5S-8>ST0P1Y,WIDE1-1,WIDE2-1:`lS&l5wK\>"51}=)
        > WinMain:2012-01-01T13:56:41.656 Transmit(KQ5S-8>ST0P1Y,KQ5S-13*,WIDE1*,WIDE2-1:`lS&l5wK\>"51}=)
        > WinMain:2012-01-01T13:56:41.656 710 PKT:DigiPeating Not Supported on KWD710(Pkt) Protocol Ports
        >
        > Does this mean I have to use the 710 in APRS mode? I prefer having APRSIS/32 be in control.
        >
        > Tom
        > KQ5S
        >
        >
        >
        > ------------------------------------
        >
        > Yahoo! Groups Links
        >
        >
        >
        >
      • Tom
        Thanks. That wored. Tom KQ5S
        Message 3 of 5 , Jan 1, 2012
        • 0 Attachment
          Thanks.  That wored.
           
          Tom
          KQ5S

          On Sun, Jan 1, 2012 at 6:48 PM, Lynn W Deffenbaugh (Mr) <kj4erj@...> wrote:
          The KWD710(Pkt) mode keeps the D710 in TNC mode.  In this mode, the
          UNPROTO xxxx VIA yyyy doesn't support transmitting used path elements
          and therefore is unusable as a digipeater.

          The easiest way to use a D710 as a digipeater is to put it into KISS
          mode and let APRSISCE/32 take full control.  The normal KISS type port
          should do that, provided that you have the D710's TNC in Packet mode
          before starting APRSISCE/32 or enabling the port.

          Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

          On 1/1/2012 9:02 AM, Tom - KQ5S wrote:
          > I modified the xml file for digipeating.  When I look at the digi log it says PKT:DigiPeating Not Supported on KWD710(Pkt) Protocol Ports
          >
          > WinMain:2012-01-01T13:56:41.656 Digipeating KQ5S-8 (WIDE1-1) via(WIDE1-1=WIDE1*)
          > WinMain:2012-01-01T13:56:41.656 Original(KQ5S-8>ST0P1Y,WIDE1-1,WIDE2-1:`lS&l5wK\>"51}=)
          > WinMain:2012-01-01T13:56:41.656 Transmit(KQ5S-8>ST0P1Y,KQ5S-13*,WIDE1*,WIDE2-1:`lS&l5wK\>"51}=)
          > WinMain:2012-01-01T13:56:41.656 710 PKT:DigiPeating Not Supported on KWD710(Pkt) Protocol Ports
          >
          > Does this mean I have to use the 710 in APRS mode?  I prefer having APRSIS/32 be in control.
          >
          > Tom
          > KQ5S
          >
          >
          >
          > ------------------------------------
          >
          > Yahoo! Groups Links
          >
          >
          >
          >



          ------------------------------------

          Yahoo! Groups Links

          <*> To visit your group on the web, go to:
             http://groups.yahoo.com/group/aprsisce/

          <*> Your email settings:
             Individual Email | Traditional

          <*> To change settings online go to:
             http://groups.yahoo.com/group/aprsisce/join
             (Yahoo! ID required)

          <*> To change settings via email:
             aprsisce-digest@yahoogroups.com
             aprsisce-fullfeatured@yahoogroups.com

          <*> To unsubscribe from this group, send an email to:
             aprsisce-unsubscribe@yahoogroups.com

          <*> Your use of Yahoo! Groups is subject to:
             http://docs.yahoo.com/info/terms/


        Your message has been successfully submitted and would be delivered to recipients shortly.