Loading ...
Sorry, an error occurred while loading the content.

Re: [aprsisce] Fwd: FASTRAC-1 Digipeater Activated

Expand Messages
  • Randy Love
    Hmm... To run down those batteries, somebody sending posit packets thru it every 3 sec with a 1000ms tx delay should do the trick! ;) (Of course, I would
    Message 1 of 3 , Dec 1, 2011
      To run down those batteries, somebody sending posit packets thru it every 3 sec with a 1000ms tx delay should do the trick!    ;)
      (Of course, I would *never* actually do or recommend this to anyone!)

      On Thu, Dec 1, 2011 at 9:42 PM, Lynn W Deffenbaugh (Mr) <kj4erj@...> wrote:

      To find out when one of the FAST satellites will be in range of your station, simply send an APRS message to FAST1 or FAST2.  The message content can be anything and you must have recently transmitted a position for your station.  You will receive a response describing the next expected pass of the respective satellite.

      Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

      PS.  You can send a message to ISS or any of the other popular amateur radio satellites to receive the next pass information for that satellite at your most recently transmitted coordinates.

      PPS.  If the body of the message is an active APRS station (callsign-SSID), then the pass prediction will be based on that station's most recent position instead of your own.

      On 12/1/2011 9:34 PM, Lynn W Deffenbaugh (Mr) wrote:
      Received from the [digitalradio] Yahoo group:

      -------- Original Message --------
      Subject:[digitalradio] FASTRAC-1 Digipeater Activated
      Date:Thu, 1 Dec 2011 21:32:09 +0000 (GMT)
      From:Trevor . <m5aka@...>

      The AX.25 packet radio digipeater on the amateur radio satellite FASTRAC-1 (FO-69), will be available for use by radio amateurs from 1600 UT on Friday, 2 December, see 
      73 Trevor M5AKA

    Your message has been successfully submitted and would be delivered to recipients shortly.