Loading ...
Sorry, an error occurred while loading the content.
 

B vfo TMD710 setup config

Expand Messages
  • Mark Burfield
    Hi Lynn and others i know some people like to use the B side vfo for APRS on the D710 so after playing for a while im posting the config for this for both APRS
    Message 1 of 1 , Nov 8, 2011
      Hi Lynn and others i know some people like to use the B side vfo for APRS on the D710 so after playing for a while im posting the config for this for both APRS and PKT in the hope it may help others set theres up the same way.
       
      <RFPort Name="D710 APRS">
      <Protocol>KWD710(APRS)</Protocol>
      <Device>COM3:57600,N,8,1</Device>
      <RfBaud>1200</RfBaud>
      <OpenCmd>^C^C^C~!!0</OpenCmd>
      <OpenCmd>TC 1!?!1.0</OpenCmd>
      <OpenCmd>TC 1!TS 1!1.0</OpenCmd>
      <OpenCmd>TN 1,1!TN 1,1</OpenCmd>
      <OpenCmd>TC 0!!0.050</OpenCmd>
      <OpenCmd>^M!cmd:!1</OpenCmd>
      <OpenCmd>DIG OFF</OpenCmd>
      <OpenCmd>GB 4800</OpenCmd>
      <OpenCmd>HB 1200</OpenCmd>
      <OpenCmd>GPST $GPRMC</OpenCmd>
      <OpenCmd>LTM 0</OpenCmd>
      <OpenCmd>LTMH OFF</OpenCmd>
      <OpenCmd>LOC E 0</OpenCmd>
      <OpenCmd>M ON</OpenCmd>
      <OpenCmd>MCOM ON</OpenCmd>
      <OpenCmd>MS OFF</OpenCmd>
      <OpenCmd>CONO OFF</OpenCmd>
      <OpenCmd>P 250</OpenCmd>
      <OpenCmd>UI OFF</OpenCmd>
      <OpenCmd>UIF NOID</OpenCmd>
      <OpenCmd>UIT %</OpenCmd>
      <OpenCmd>X OFF</OpenCmd>
      <OpenCmd>HEADER OFF</OpenCmd>
      <OpenCmd>NE ON</OpenCmd>
      <OpenCmd>NO OFF</OpenCmd>
      <OpenCmd>ECHO OFF!cmd:!1.0</OpenCmd>
      <OpenCmd>BEACON EVERY 30!cmd:!1.0</OpenCmd>
      <OpenCmd>ECHO OFF!cmd:!1.00</OpenCmd>
      <OpenCmd>BEACON EVERY 0!cmd:!1.00</OpenCmd>
      <OpenCmd>TC 1!?EH!1</OpenCmd>
      <OpenCmd>TC 1!TS 1!1.00</OpenCmd>
      <CloseCmd>TC 0!!0.050</CloseCmd>
      <CloseCmd>^M!cmd:!1</CloseCmd>
      <CloseCmd>LTM 0</CloseCmd>
      <CloseCmd>TC 1!?EH!1</CloseCmd>
      <CloseCmd>TC 1!TS 1</CloseCmd>
      <CloseCmd>TN 0,0!TN 0,0</CloseCmd>
      <QuietTime>0</QuietTime>
      <Enabled>0</Enabled>
      <XmitEnabled>1</XmitEnabled>
      <ProvidesNMEA>0</ProvidesNMEA>
      <RFtoISEnabled>1</RFtoISEnabled>
      <IStoRFEnabled>1</IStoRFEnabled>
      <MyCallNot3rd>1</MyCallNot3rd>
      <BeaconingEnabled>1</BeaconingEnabled>
      <BeaconPath></BeaconPath>
      <BulletinObjectEnabled>1</BulletinObjectEnabled>
      <MessagesEnabled>1</MessagesEnabled>
      <MessagePath></MessagePath>
      <TelemetryEnabled>0</TelemetryEnabled>
      <TelemetryPath></TelemetryPath>
      <!--DigiXform-->
      </RFPort>
       
       
       
      <RFPort Name="D710 PKT">
      <Protocol>KWD710(Pkt)</Protocol>
      <Device>COM3:57600,N,8,1</Device>
      <RfBaud>1200</RfBaud>
      <OpenCmd>^C^C^C~!!0</OpenCmd>
      <OpenCmd>TC 1!?</OpenCmd>
      <OpenCmd>TC 1!TS 1</OpenCmd>
      <OpenCmd>TN 2,1!TN 2,1</OpenCmd>
      <OpenCmd>^M!cmd:!5</OpenCmd>
      <OpenCmd>DIG OFF</OpenCmd>
      <OpenCmd>GB 4800</OpenCmd>
      <OpenCmd>HB 1200</OpenCmd>
      <OpenCmd>GPST $GPRMC</OpenCmd>
      <OpenCmd>LTM 10</OpenCmd>
      <OpenCmd>LTMH OFF</OpenCmd>
      <OpenCmd>LOC E 0</OpenCmd>
      <OpenCmd>M ON</OpenCmd>
      <OpenCmd>MCOM ON</OpenCmd>
      <OpenCmd>MS OFF</OpenCmd>
      <OpenCmd>CONO OFF</OpenCmd>
      <OpenCmd>P 250</OpenCmd>
      <OpenCmd>UI OFF</OpenCmd>
      <OpenCmd>UIF NOID</OpenCmd>
      <OpenCmd>UIT %</OpenCmd>
      <OpenCmd>X OFF</OpenCmd>
      <OpenCmd>HEADER OFF</OpenCmd>
      <OpenCmd>NE ON</OpenCmd>
      <OpenCmd>NO OFF</OpenCmd>
      <OpenCmd>ECHO OFF!cmd:!1.0</OpenCmd>
      <OpenCmd>BEACON EVERY 0!cmd:!1.0</OpenCmd>
      <OpenCmd>ECHO OFF!cmd:!1.00</OpenCmd>
      <OpenCmd>BEACON EVERY 0!cmd:!1.00</OpenCmd>
      <OpenCmd>^C^C^C~!!0</OpenCmd>
      <CloseCmd>^M!cmd:!1</CloseCmd>
      <CloseCmd>LTM 0</CloseCmd>
      <CloseCmd>TC 1!TS 1</CloseCmd>
      <CloseCmd>TN 0,0!TN 0,0</CloseCmd>
      <QuietTime>0</QuietTime>
      <Enabled>1</Enabled>
      <XmitEnabled>1</XmitEnabled>
      <ProvidesNMEA>0</ProvidesNMEA>
      <RFtoISEnabled>1</RFtoISEnabled>
      <IStoRFEnabled>1</IStoRFEnabled>
      <MyCallNot3rd>1</MyCallNot3rd>
      <BeaconingEnabled>1</BeaconingEnabled>
      <BeaconPath></BeaconPath>
      <BulletinObjectEnabled>1</BulletinObjectEnabled>
      <MessagesEnabled>1</MessagesEnabled>
      <MessagePath></MessagePath>
      <TelemetryEnabled>0</TelemetryEnabled>
      <TelemetryPath></TelemetryPath>
      <!--DigiXform-->
      </RFPort>
       
       
      73 Mark MM1MPB
    Your message has been successfully submitted and would be delivered to recipients shortly.