aprsisce doesn't need to see the soundcard, just agw.
Go to Configure > Ports > New Ports
In the Type drop-down box, choose AGW. then give it a unique name, such as Local AGW if AGW is running on your local pc.
Once you click "Create", a popup dialog will appear asking you to Select Port Type. Click TCP/IP.
The TCP config dialog will appear. Enter localhost as the IP/DNS if AGW is running on the same machine as APRSISCE. Make sure you set the port to 8000 or else it won't be able to connect to AGW.
Click OK and now you are at the Port Configuration dialog for the port you created.
The default values should be fine, so just click Accept.
You should see the name you gave that port flashing with Delay as it is attempting to connnect, and OK once it is connected. After you see it saying Local AGW OK, you should start seeing stations.
You can run APRSISCE and UI-view concurrently like this and see the data on both. I do this, but have my AGW machine in the garage and server up the data via my Wifi AP.
On Sun, Aug 28, 2011 at 10:53 PM, reicamann <reicamann@...>
--- In email@example.com
, "Lynn W Deffenbaugh (Mr)" <kj4erj@...> wrote:
> Short answer: yes
> Longer answer: From http://aprsisce.wikidot.com/port-configuration
> > The AGW interface only support TCP/IP connections to AGWPE. The TCP
> > Configuration dialog prompts for an IP address or DNS name of the host
> > where AGEPE is executing. Port 8000 is the default for AGW and should
> > not be changed unless you know what you're doing.
> Read the remainder of the page for how to set up a port, but you
> definitely need to know about port 8000. Also, APRSISCE/32 currently
> only supports the first port within AGW PE(pro).
> Lynn (D) - KJ4ERJ - Author of APRSISCE for windows Mobile and Win32
> On 8/28/2011 9:04 PM, reicamann wrote:
> > Is it possible to set up aprsis32 with soundcard and agwpe?
This is what it says on the wikidot page:
Welcome to APRSISCE/32 » Menus » Configure Menu » Port Configuration » port-KISS
which is not much help.
I have UIView working with agwpe as host in Kiss mode with soundcard.
Trying to make Aprsisce to see the soundcard is the problem.
The configuration of a new port neither gives access to Kiss nor soundcard. I am at a loss...where is the solution?