If you had been reading previous posts then the thinking will be minimal. It
may not even produce smoke from the ears. :)
I will tell you it works great. I have no SIM card in my phone so it is now
only a mobile platform. I turned off W-Fi since I am never really using it
near my network. That cured my BT/Wi-Fi contention. BT lost!
I am using the Roving Networks RN-240M but I think Lynn is using a IOGear
Bluetooth module. I was ordering other stuff from mouser so I added it.
The GPS on the mobile platform works so another GPS is not really needed.
The TNC only needs KISS.
The Tilt does have a GPS antenna port but I have not found the HTC antenna
or looked for a 3rd party antenna. Inside a car, on the roads I have
traveled so far, reception has not been an issue. I do not have heavy woods
with rain testing in yet. It does appear to shut off if I don't hit a key
but I may have caused that by changing a setting.
The thick tree cover wet with rain is the reason I picked up an amplified
antenna for my usual GPS. FIXes are fixed now!
APRSISCE is not GPS software, so I for now I will still use my usual GPS.
The usual GPS does all the normal stuff a GPS is good for. Waypoints and
tracking are two items that I depend on. Yeah, I know that waypoints can be
APRSISCE non-RF objects and I have played with that a bit. APRSISCE will
also record a track but not what I desire. This not an issue since the usual
GPS does that just fine.
Although, I found MapWM which will record a track which can be later
uploaded directly to their web site. It can be downloaded in a couple of
different formats later. A GPX file is one format made available which is
what I use. This last weekend I was on a road that was not in the OSM
database. I will attempt to update using the MapWM output after I edit it a
bit. There may be other GPS software that will emulate my Garmin. I haven't
looked very hard for it yet. Between APRSISCE with objects and MapWM for
track recording, the usual GPS could stay home. Nah!
APRSISCE and MapWM can access the Mobile Platform GPS concurrently. This is
nice! From what I can tell, a BT GPS could also be used and shared the same
way. I have not been successful nor tried for more than a couple of minutes.
I was actually using my Garmin connected to my BT module. I may get back it
to it later but for now, the GPS in the Mobile Platform works fine. WinMo
has to be adjusted for the external GPS and I did not have it set correctly.
I picked up an 8GB uSD card and set the tile structure very similar to my
desktop machine. The quickest way I found is to put the SD card into the
desktop and load it, but other options will work. I may add a 32GB card in
the future. Not that it is needed for maps unless...
I use the Active Sync software from Microsoft. When that connection is
running, tiles can be loaded through the desktop directly using APRSISCE.
] On Behalf
Sent: Wednesday, June 01, 2011 09:45
Subject: [aprsisce] Re: Aprsisce digi capable..
I was simply thinking that if I can pick up a windows phone on the cheap,
use GPS and blue tooth to connect it to a TNC hooked to a radio, it might
make one of my dumb trackers for an event into something a little more two
way. If I've got it hooked to RF, I don't really need it to hit the IS
Really just thinking outloud, wonder how APRSISCE would work on a phone that
has no network connectivity... thinking I'd have to load an SD card with the
maps already from another source though....
--- In email@example.com
> , "Fred
Hillhouse" <fmhillhouse@...> wrote:
> A Bluetooth module will work. I have one running. The Tilt has a serial
> on the USBEXT connector but I have not determined how or if it is possible
> to access it except for updating a ROM.
> My Tilt doesn't like Wi-Fi and BT running concurrently. So as an I-Gate
> this particular unit using BT for theTNC connection and W-FI for the
> connection will not work, hence the search for more USBEXT use data. It
> make for a great digipeater.
> Best regards,
> Fred, N7FMH
> From: firstname.lastname@example.org
> ] On
> Of apenadragon
> Sent: Wednesday, June 01, 2011 09:24
> To: email@example.com
> Subject: [aprsisce] Re: Aprsisce digi capable..
> I'm curious as to what it takes exactly to connect one of these silly cell
> phones to an external TNC.
> and just so I'm clear, you have a windows phone, that's not being used as
> phone, hooked to a TNC/Radio for useing APRSISCE?
> --- In firstname.lastname@example.org
> , "Fred
> Hillhouse" <fmhillhouse@> wrote:
> > James,
> > I picked up one of those "silly little cellphones" at NEAR-FEST this
> > for $10. The silly little phone portion works according to the previous
> > owner but I have not yet tested nor plan to. I was thinking that an
> > KPC3, not my 3+V8.3 unless the delay issue is solved, would make a great
> > DIGI and hope to do that at some point. Actually, just about any KISS
> > will work.
> > I am now on the hunt for another cheap silly little cellphone. I am
> > forward to the updated digi functions Lynn will be adding.
> > Leave off the duct tape, it makes a mess when it does come off.
> > hook and loop is pretty good. I haven't figured out how to remove old
> > residue yet. Goop-off doesn't work.
> > I currently have the APRS Mobile Platform, formally known as "silly
> > cellphone", connected to a T2-301. Quite a nice setup!
> > Best regards,
> > Fred, N7FMH