Loading ...
Sorry, an error occurred while loading the content.

6239RE: [aprsisce] Re: Shapes / ShowMe! (Dev 2011/02/01 00:44)

Expand Messages
  • Mike Besemer (WM4B)
    Feb 1, 2011
    • 0 Attachment

      Are you putting them into the same directory as the .exe file?  Mine are in a subdirectory.

       

       

      Mike

      WM4B

       

      From: aprsisce@yahoogroups.com [mailto:aprsisce@yahoogroups.com] On Behalf Of Fred Hillhouse
      Sent: Tuesday, February 01, 2011 4:28 PM
      To: aprsisce@yahoogroups.com
      Subject: RE: [aprsisce] Re: Shapes / ShowMe! (Dev 2011/02/01 00:44)

       

       

      Hi Mike,

       

      If you haven't, unzip all files into your folder. That fixed it for me. I had only the SHP and DBF files but added the SHX and PRJ.

       

      Best regards,

      Fred

       

       


      From: aprsisce@yahoogroups.com [mailto:aprsisce@yahoogroups.com] On Behalf Of Mike Besemer (WM4B)
      Sent: Tuesday, February 01, 2011 16:24
      To: aprsisce@yahoogroups.com
      Subject: RE: [aprsisce] Re: Shapes / ShowMe! (Dev 2011/02/01 00:44)

       

      Same here, Lynn. 

      I’ll send my XML file direct.

      73,

      Mike

      WM4B

      From: aprsisce@yahoogroups.com [mailto:aprsisce@yahoogroups.com] On Behalf Of Fred Hillhouse
      Sent: Tuesday, February 01, 2011 9:08 AM
      To: aprsisce@yahoogroups.com
      Subject: RE: [aprsisce] Re: Shapes / ShowMe! (Dev 2011/02/01 00:44)

       

      "Show Me" shuts down APSRISI32. When I restart it, the ALL is checked.

      Best regards,

      Fred


      From: aprsisce@yahoogroups.com [mailto:aprsisce@yahoogroups.com] On Behalf Of n1naz
      Sent: Tuesday, February 01, 2011 06:38
      To: aprsisce@yahoogroups.com
      Subject: [aprsisce] Re: Shapes / ShowMe! (Dev 2011/02/01 00:44)

       

      Also be aware that if you do a "show me", the NWS/All gets checked, be sure to un-check when your done(if you want to).

      --- In aprsisce@yahoogroups.com, "Lynn W Deffenbaugh (Mr)" <kj4erj@...> wrote:
      >
      > Ok, so I went and did it. Here's another Development release with lots
      > of NWS and Shapefile stuff to play with. You can read the details
      > below, but personally I think the Configure / NWS Shapes / ShowMe is the
      > coolest one. If you have shapefiles loaded, then center the main map
      > somewhere and hit that menu option. Not only will one or more
      > MultiTrack windows open for each shape that might involve the screen
      > center point, but they'll also auto-zoom to show the entire shape! And
      > the shapes come with nice bold borders now too.
      >
      > Don't be surprise, however, to see the shapes go pale gray in a short
      > time. That's when my internally-generated object hits its expiration
      > time and goes to a Killed status. If it's not still centered somewhere,
      > the entire object will disappear. But it will remain in gray in the
      > popup that had it until you either close that MultiTrack or start
      > following some other station.
      >
      > This same auto-zoom feature is now the default behavior for Configure /
      > NWS / Popup MultiTrack windows as well. And you can now choose what
      > pops up based on Always, Only New and suppress any that don't include a
      > defined area (shape or multiline). You can also now suppress
      > notifications (message or MultiTrack) at the NWS Product level in
      > Configure / NWS / Notify Products. In that menu you also get a sneak
      > peek at the symbol used for the product as well as the "line code" which
      > currently sets the color and line style as described at
      > http://www.aprs-is.net/WX/MultilineProtocol.aspx.
      >
      > Don't panic if the filled areas disappear when you pan the map. This is
      > by design and brings panning performance back to where I'm comfortable
      > with it. As soon as you stop panning (release the mouse button), the
      > shapes will reappear.
      >
      > There's some other stuff below, some of which is protecting the program
      > from people that down-grade (go back to earlier versions) which can
      > introduce issues due to automatic XML format upgrades. This release
      > does LOTS of that, but it now also automatically saves the previous
      > version .XML file similar to how the About updater saves the previous .EXE.
      >
      > Let me know if you find any bugs in this pretty quickly as I'd like to
      > get it committed and out to the General Release because of the filter
      > bug that is fixed within it. Besides, the Release Notes is already
      > quite substantial in such a short time.
      >
      > Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
      >
      > Define APDUxx as U2APRS for Android
      > (http://aobajoke.no-ip.org/~ja7ude/japanese/u2aprs10/indexe.html)
      >
      > Mark NWS objects Killed rather than simply purging them away on expiration.
      >
      > Correct bust that allowed followed killed objects to disappear rather
      > substantially fade until they're no longer needed.
      >
      > Shaped areas that are killed but centered in a MultiTrack will turn
      > light gray until they're not centered anymore. If you look at the
      > station info popup, it will say "KILLED OBJECT".
      >
      > NWS shapes are now included in Station popup menu
      >
      > Corrected black on black station in scrolling station logs when NWS
      > alerts are processed. (Recursion is such an ugly word, especially when
      > it's unexpected)
      >
      > If too many MultiTracks are open when an NWS alert is received and
      > Configure / NWS / Popup MultiTrack is checked, it just quietly ignores
      > the problem. It used to complain for every one generating LOTS of
      > message boxes overnight.
      >
      > When manually panning a window, remove the multiline objects to
      > (dramatically) improve pan responsiveness. Area fills will re-appear
      > when the pan operation is complete (ie. when you release the mouse button).
      >
      > Fixed Configure / Ports / APRS-IS to actually use the Enable, QuietTime,
      > Callsign and Comment (even though the latter two are non-changeable)
      >
      > Change station info popup relative distance/bearing to FromCtr and
      > FromME instead of opposite (Julian G4ILO)
      >
      > Add outline to the shapes so that I can see if some of them are actually
      > TOO transparent. Please let me know the object ID if you see one like
      > that, particularly Australia's Flood areas.
      >
      > Configure / NWS Shapes / ShowMe will popup individual shapes that
      > include, or are near, the screen center of the main window when the menu
      > option is selected.
      >
      > Replace Track(ObjectID) with the description of the shape for test
      > shapes and better describe shape-expanded NWS objects.
      >
      > Title of windows "following" an NWS object (like the tests and
      > auto-popups from Configure / NWS / Popup MultiTrack) are more informative.
      >
      > Configure / NWS Shapes now supports unchecking individual files. I need
      > to add a prompt to ask if you're only disabling or would like to remove
      > the file from the list.
      >
      > Whenever a version change is detected, the pre-upgraded XML files is
      > saved as .XML.yyyymmddhhmm where yyyymmddhhmm is the previous version
      > string that should match a saved .EXE.yyyymmddhhmm.
      >
      > If the program detects a version downgrade, it will warn you that some
      > settings may be lost. This is due to the non-downgrade-compatible XML
      > configuration upgrades that may have occurred. Proceed at your own risk.
      >
      > Corrected bust in shape optimizer that was causing not all of the
      > "rings" to draw. This was particularly evident in QLC111. You should
      > see lots more detail in AUS shapes now.
      >
      > Don't pop up an already-expired NWS object. WXSVR-AU does LOTS of these
      > for some reason. I'm not sure how long they keep transmitting the
      > NWS-CANCLs.
      >
      > Force a filter of m/0 if no other filter is required (Julian G4ILO)
      > (Adam KB8VOM)
      >
      > Configure / NWS / Popup MultiTrack now has Always and New options.
      > "Always" will create or focus MultiTracks for NWS objects. "New" will
      > only do this for a newly created object.
      >
      > Support suppressing NWS Popups unless they describe an Area (multiline
      > or shapefile). This avoids consuming a bunch of redundant MultiTracks
      > for single point objects.
      >
      > New (possibly temporary) Packets(Internal) trace log as well as INT (vs
      > RF or IS) flagging in both the Transmit and Packets logs. This will
      > make identification of internally-generated packets a bit easier, in
      > case I ever need to know such a distinction.
      >
      > Transmit when "T" is pressed on the keyboard (assuming the main map
      > window is focused, otherwise Windows won't tell me you even hit a key).
      > (Alan N6VUD)
      >
      > New Configure / NWS / Notify Products to individually disable the
      > various known NWS Products (http://www.aprs-is.net/WX/ProdCodes.aspx and
      > http://wxsvr.aprs.net.au/products.php) from triggering message
      > notifications and MultiTrack popups. Eventually you'll be able to
      > configure more stuff on each Product than just the enable like color,
      > line style, symbol, -IS to RF IGate...
      >

    • Show all 50 messages in this topic