2716RE: [aprsisce] TT4 setup
- Aug 23, 2010In addition, I would probably get a USB hub and run both ports through it. Put the hub somewhere in the car that way only one connection has to be made when the laptop is removed.
From: firstname.lastname@example.org [mailto:email@example.com] On Behalf Of kd4dra
Sent: Monday, August 23, 2010 14:48
Subject: Re: [aprsisce] TT4 setupOK that makes sense
From: Fred Hillhouse <fmhillhouse@...>
Sent: Mon, August 23, 2010 2:40:24 PM
Subject: RE: [aprsisce] TT4 setup
Hmm, I must have deleted something...
This is what the first thing is:
APRSIS32 COM-port <=KISS-Serial=> TT4 <=radio_port=> RADIO
APRSIS32 COM-port <=NMEA-Serial=> GPS
I also edited the previous sent message.
From: firstname.lastname@example.org [mailto:email@example.com] On Behalf
Of Fred Hillhouse
There are two ways to do this at least.
First, use APRSIS32 with a port set to KISS and connect to the TT4. Also,
use APRSIS32 and connect to the GPS.
There is KISS only firmware that will run in the TT4. It may be useful.
Second, would be to connect the GPS to the TT4 and laptop through a y-cable.
The TT4 may then beacon on its own and APRSIS32 will beacon. My OT2 is
running that way (when it is running)
I think the first way is reasonable and I will probably do that with my TT4
when I get the TT4 going again.
[mailto:firstname.lastname@example.org] On Behalf Of Rick
Sent: Monday, August 23, 2010 13:59
Subject: [aprsisce] TT4 setup
I know this has been ask before, I want to set up my APRSIS
in my Van
that is now running with a TT4 alpha, Do I use the GPS that
I got from
Byon, connected with the Y cable also from Byon, will aprsis
or would I have to have a seperate one running thru the
And what would the settings be in the TT4, I think I'm
letting the software control the transmits????
Thanks I believe thats all the Questions but if you think of
something I missed, "HELP"
Rick / kd4dra
- << Previous post in topic Next post in topic >>