Loading ...
Sorry, an error occurred while loading the content.

25865RE: [aprsisce] Feature Request

Expand Messages
  • Steve
    Jun 29, 2014
    • 0 Attachment

      I just found software that does what I want

      Habrotate pulls info from the Habitat database and feeds to pstRotator and pstRotator has an APRS option.

      Have just paid for pstRotator and waiting for a registration code was only 15 Euro

      When it arrives will test it all out and report back


      Still think it would be nice to have in APRSIS32 though



      https://github.com/philcrump/habrotate source

      https://www.philcrump.co.uk/Habrotate Windows compile








      From: aprsisce@yahoogroups.com [mailto: aprsisce@yahoogroups.com ]
      Sent: 27 June 2014 23:44
      To: aprsisce@yahoogroups.com
      Subject: [aprsisce] Feature Request



      Just received my rotator control unit an ERC-M unit only got the USB option I do wonder if the Lan option might be handy as well.

      What I would like when Lynn gets the time is the ability to follow a station and have the rotator system track that station.

      For me this is mainly for use with Lynn ’s habitat to APRS system for tracking balloons. But also ships in the channel. But it’s obviously useful for tracking anything moving.

      So whats needed is a rotator port type the usual TCP/IP, USB, Com.

      The software already does bearing so elevation added. Following a station with rotator enabled auto tracks that station.

      My control box uses Yaesu GS232A and B protocols which seem standard across various rotators and software

      Yaesu GS232 A and B

      The only difference in A and B is the format how a position is returned from the ERC

      Note 1): This command was added by the Dual-AZ protocol by VE2DX and used to drive 2 AZ-rotators with a 2-axis interface

      Command to ERC                Description                                            Returned from ERC

      A<cr>                                      Stop rotation azimuth                            <cr>

      B<cr> (in GS232A-mode)      Request position elevation                  +0eee<cr><lf>

      B<cr> (in GS232B-mode)      Request position elevation                  EL=eee<cr><lf>

      C<cr> (in GS232A-mode)     Request position azimuth                     +0aaa<cr><lf>

      C<cr> (in GS232B-mode)     Request position azimuth                     AZ=aaa<cr><lf>

      C2<cr> (in GS232A-mode)   Request position azimuth + elevation +0aaa+0eee<cr><lf>

      C2<cr> (in GS232B-mode)   Request position azimuth + elevation AZ=aaa<s><s>EL=eee<cr><lf>

      D<cr>                                      Rotate DOWN or CCW 2nd axis            <cr>

      E<cr>                                      Stop rotation elevation                         <cr>

      L<cr>                                       Rotate CCW 1st axis                              <cr>

      Maaa<cr>                                Rotate azimuth to aaa                            <cr>

      MBeee<cr>                             1) Rotate elevation to eee                     <cr>

      R<cr>                                      Rotate CW 1st axis                                 <cr>

      S<cr>                                      Stops rotation both axis                       <cr>

      U<cr>                                      Rotate UP or CW 2nd axis                      <cr>

      Waaa eee<cr>                        Rotate azimuth to aaa and Rotate elevation to eee<cr>


      I think A,B,C,E,M and MB, I don’t see a need for D,L,R,S,U





    • Show all 69 messages in this topic