Loading ...
Sorry, an error occurred while loading the content.

25740Re: [aprsisce] Problem connecting KamPlus

Expand Messages
  • Joseph LaFerla
    Jun 5, 2014
    • 0 Attachment
      The kam was on the correct port but would not go into kiss mode properly.  Although I typed intface kiss, it still kept giving me the cmd: prompt.  Then I rebooted it and it went into kiss mode and now all Is working fine again.  Thanks all for your help.

      Joe
      VA3JLF


      Sent from Windows Mail

      From: 'kb8rco@...' kb8rco@... [aprsisce]
      Sent: ‎Thursday‎, ‎June‎ ‎5‎, ‎2014 ‎11‎:‎11‎ ‎AM
      To: 'kb8rco@...' kb8rco@... [aprsisce]

       

      Are you sure the KAM is still connected to COM4 and was it truly at 2400 baud?  Whatever is connected there sent a bunch of <CR> (ASCII 13) in to APRSIS32 and nothing after that.

      Connect to COM4 from a terminal program and monitor for a received packet.  The header will be non-printable, but the payload should be readable for all received packets, even in KISS mode.  If the header is readable, then the KAM is no longer in KISS.  If you don't see anything in the terminal program when you power up the KAM and/or receive a packet, then I suspect the port is no longer COM4.


      Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32



      On 6/5/2014 10:04 AM, Joseph LaFerla joe@... [aprsisce] wrote:
      Hi

      I have had my kam plus working fine with aprsis for a long time.  Yesterday I had a comport problem and I cannot get aprsis working again.  I have the port set up as simply kiss.  Attached is the log.  It looks like something is missing in the port config but I cannot figure it out.  Thanks for any help.

      Joe
      VA3JLF



      WinMain:2014-06-05T14:01:48.568 Starting Port(KamPlus)
      Port(KamPlus):2014-06-05T14:01:48.568 CpReader Running on COM4:2400,N,8,1 (1 OpenCmds, 1 CloseCmds)
      Port(KamPlus):2014-06-05T14:01:48.568 Opening COM4:2400,N,8,1
      Port(KamPlus):2014-06-05T14:01:48.568 Opening COM4 with 4 Args
      Port(KamPlus):2014-06-05T14:01:48.568 COM4:Packet Length 64 Version 2
      Port(KamPlus):2014-06-05T14:01:48.568 COM4:ServiceMask 0x1 Reserved1 0x0
      Port(KamPlus):2014-06-05T14:01:48.568 COM4:MaxQueue Tx 0 Rx 0 Baud 268435456
      Port(KamPlus):2014-06-05T14:01:48.568 COM4:Provider SubType 1 Capabilities 0xFF
      Port(KamPlus):2014-06-05T14:01:48.568 COM4:Settable Params 127 Baud 0x1006FFFF Data 0xF StopParity 0x1F07
      Port(KamPlus):2014-06-05T14:01:48.568 COM4:Current Queue Tx 0 Rx 4096
      Port(KamPlus):2014-06-05T14:01:48.568 COM4:Provider Specifics 0x0 0x0
      Port(KamPlus):2014-06-05T14:01:48.568 CpOpen:Port COM4 2400,N,8,1 !CTSFlow !DSRFlow !OutXon(2048) !InXoff(512) DTR_ENABLE !DSRSense RTS_ENABLE
      Port(KamPlus):2014-06-05T14:01:48.568 Opened COM4:2400,N,8,1, Flushing 0 in TransmitQueue, Sending 1 OpenCmds
      Port(KamPlus):2014-06-05T14:01:48.568 Command[1]:~
      Port(KamPlus):2014-06-05T14:02:23.710 Sent[84]:<C0 00 82 A0 AE AE>b`<E0 AC 82>f<94 98 8C>`<AE 92 88 8A>b@b<AE 92 88 8A>d@c<03 F0>@140223h4356.06N/07709.61W-PHG2200APRS-IS for Win32<C0>
      Port(KamPlus):2014-06-05T14:02:23.785 KISS:Missing Leading C0[83]:<13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13>


      Sent from Windows Mail



    • Show all 3 messages in this topic