Loading ...
Sorry, an error occurred while loading the content.

23689Re: DR-135T with GPS Connected

Expand Messages
  • Bill
    Aug 24 4:06 PM
    • 0 Attachment
      Confirmed. Upon a radio reset, I'm back to just the APRS packets in putty. I guess I'll look into options to connect the GPS to the laptop...

      Thanks for the help with confirming this. I do have an email into the Argent folks asking if their v3 TNC for the DR-135 supports GPS pass-through.

      --- In aprsisce@yahoogroups.com, "Lynn W Deffenbaugh (Mr)" <kj4erj@...> wrote:
      >
      > I suspect you need a reset or something to have the KISS actually take
      > effect. If it was truly in KISS mode, you would not be able to read the
      > headers of the packets, but just the payloads. The headers should be
      > bit-shifted ASCII which guarantees them to be non-printable.
      >
      > Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
      >
      > On 8/23/2013 2:17 PM, Bill wrote:
      > > Ok, so here's a capture after issues the KISS ON command. You can see that the TNC ACKs it and the GPS data appears to still be coming through. This is just short capture, but if you need more, I'm happy to collect it.
      > >
      > > cmd:$GPRMC,181549.000,A,3950.6192,N,08616.9498,W,0.06,104.89,230813,,,A*73
      > > KB9CIZ-2>SYPY7S,WB9FIU,WIDE1,W9ICE-10*,WIDE2-1:`qLdm4_k2"61}
      > > kiss $GPRMC,181559.000,A,3950.6195,N,08616.9498,W,0.02,25.43,230813,,,A*45
      > > on
      > > KISS was OFF
      > > cmd:$GPRMC,181609.000,A,3950.6195,N,08616.9498,W,0.03,70.10,230813,,,A*44
      > > KC9MVQ>APN382,W9GO-3,W9NWN,W9ICE-10,WIDE3*:!4053.92N8621.32W#LUCERNE+KC9MVQ-1
      > >
      > > K9APR-3>APN382,W9ICE-10*,WIDE2-1:!4011.59NS08541.11W#PHG6460/W3,INn Linwood,IN.
      > >
      > > $GPRMC,181619.000,A,3950.6195,N,08616.9498,W,0.23,293.42,230813,,,A*7F
      > >
      > >
      > > --- In aprsisce@yahoogroups.com, "Lynn W Deffenbaugh (Mr)" <kj4erj@> wrote:
      > >> Ok, with KISS, I'm pretty certain that the GPS strings will quit coming
      > >> through.
      > >>
      > >> To prove this, can you put the EJ into KISS mode within your putty
      > >> session and watch the output? A KISS packet has an unreadable header,
      > >> but the payloads should be legible. And I suspect you'll quit seeing
      > >> the NMEA sentences, but only received APRS packets.
      > >>
      > >> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
      > >>
      > >> On 8/23/2013 1:22 PM, Bill wrote:
      > >>> Sorry, I omitted that. I have it configured as a KISS port, with COM1 attached as the device. Does that meet your needs? I can give you specifics on what I have checked or unchecked if needed.
      > >>>
      > >>> I can't speak for the D700, but in my case, I have a single the TX line from my GPS connected to the center tip of my three-conductor stereo plug. I'm powering the GPS from a voltage regulator as I couldn't seem to get it to power off of that front data port, although some sources seem to indicate that should work.
      > >>>
      > >>> Anyway, I'm happy to help you out or provide you with whatever you need. Just let me know. Thanks!
      > >>>
      > >>> --- In aprsisce@yahoogroups.com, "Lynn W Deffenbaugh (Mr)" <kj4erj@> wrote:
      > >>>> On 8/23/2013 10:39 AM, Bill wrote:
      > >>>>> So I guess it comes down to the question of, "Will APRSISCE/32 handle both GPS and APRS data on the same port?" Otherwise, it really doesn't make much difference if I was hallucinating or not, right?
      > >>>> That's why I need to know what port type you have configured in
      > >>>> APRSISCE/32. I want to double-check that the NMEA/GPS checkbox applies
      > >>>> to that port type, and if not, I'll make it work if you can provide a
      > >>>> capture of what the data stream looks like from the EJ.
      > >>>>
      > >>>> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
      > >>>>
      > >>>> PS. I don't think I've got a GPS wired for feeding through the front of
      > >>>> an Alinco right now. That's a different connection than what feeds into
      > >>>> a D700, isn't it?
      > >>>>
      > >>>
      > >>>
      > >>> ------------------------------------
      > >>>
      > >>> Yahoo! Groups Links
      > >>>
      > >>>
      > >>>
      > >>>
      > >
      > >
      > >
      > > ------------------------------------
      > >
      > > Yahoo! Groups Links
      > >
      > >
      > >
      > >
      >
    • Show all 18 messages in this topic