Loading ...
Sorry, an error occurred while loading the content.

22822Re: [aprsisce] KWD710(APRS) mode

Expand Messages
  • adam_kc2ant
    May 6, 2013

      I don't remember doing that.

      I know that my D710 appears to work in native APRS mode as long as aprsis32 is only transmitting messages, not beacons.

      I can send my D710 port info from my xml file with what i'm running if you like. I don't recall editing it.

      I did attempt to run the D710 in aprs mode, but receive only with aprsis32 controlling beacons, but the TNC seems unhappy with that so I have stopped using it that way.

      I know that my aprsis32 takes a long time to start pulling GPS data through the port, but I've never had the radio need to be cycled.


      --- Original Message ---

      From: "James Ewen" <ve6srv@...>
      Sent: May 6, 2013 11:21 AM
      To: aprsisce@yahoogroups.com
      Subject: Re: [aprsisce] KWD710(APRS) mode


      On Mon, May 6, 2013 at 7:16 AM, Fred Hillhouse <fmhillhouse@...> wrote:

      > I am not the correct Fred.
      > Will the others Fred's speak up? :)

      That might be why I can't find it... maybe is wasn't a Fred, maybe an
      Adam... grrr old age and faulty memories are creeping up on me. I had
      to admit that my wife was right 3 times last month! AUGGHHHH!!!


    • Show all 6 messages in this topic