Loading ...
Sorry, an error occurred while loading the content.

22733Re: Rocket Tracking

Expand Messages
  • ajmitchell91
    Apr 24, 2013
    • 0 Attachment
      I have done some more testing and come back with more questions. I am currently testing with a 2m Beeline transmitter from BigRedBee. My radio is a TH-D72A.

      APRSIS seems to only pick up the packets received by the Kenwood when I have the Kenwood TNC in PACKET12 mode rather than APRS12 mode. However in PACKET12 mode the packets are no saved at all on the Kenwood which makes me a little worried.

      I have managed to receive a few packets from the BigRedBee, which are plotted on the map perfectly. I then used MultiTrack on the BRB station, which opened another window, but despite more pings coming in no GPX file has been saved. Also in the sidebar not "Save Track" option is available for these packets. Is they in a format that does not allow them to be saved? Is there anywhere I can go to get this data (Lon. Lat. and Alt.).

      Any help would be greatly appreciated.

      Thank you,

      PS: Bonus question, I also have a 70m BRB unit, is it possible to receive packets from that unit on my radio and have them processed by APRSIS?

      --- In aprsisce@yahoogroups.com, "Steve Daniels" <steve@...> wrote:
      > You might want to look at some of the big red bee trackers, I have a high
      > power 2M on that not only outputs APRS but also has a built in data logged
      > with 1000 entry storage, you can set the APRS and data logger times
      > separately
      > Greg's trackers are designed for use on Rockets
      > Steve Daniels
      > Amateur Radio Callsign G6UIM
      > Torbay Freecycle Owner
      > http://uk.groups.yahoo.com/group/torbay_freecycle
      > APRSISCE/32 Beta tester and WIKI editor http://aprsisce.wikidot.com
      > _____
      > From: aprsisce@yahoogroups.com [mailto:aprsisce@yahoogroups.com] On Behalf
      > Of Greg Depew
      > Sent: 09 April 2013 01:03
      > To: aprsisce@yahoogroups.com ; ajmitche@...
      > Subject: Re: [aprsisce] Rocket Tracking
      > Hi Aaron, the best method of tracking a station is to multitrack it. This is
      > done by either clicking on the station and then multitrack or up in the menu
      > under follow. Once that's done it will "record" the track and you can then
      > save as a gpx file for exporting. KB3KBR Greg Sent from my Droid Charge on
      > Verizon 4G LTE
      > -----Original Message-----
      > From: ajmitchell91
      > Sent: 4/8/2013 11:47:32 PM
      > To: aprsisce@yahoogroups.com
      > Subject: [aprsisce] Rocket Tracking
      > Hello,
      > I am new to this group so I apologize if I am not posting in the right
      > format. I have a pretty open-ended question about tracking a single station.
      > First let me explain the problem. The student group I am a part of, the USC
      > Rocket Lab (uscrpl.com) builds and launches medium to large amateur rockets.
      > We track the rockets with GPS transmitters specifically designed for rockets
      > or air-balloons. I receive the beacons on my Kenwood TH-D72A (since I'm the
      > one that's licensed) and as long as we receive a few pings it makes finding
      > the rocket much easier. The problem is that the Kenwood only holds one ping
      > in memory for each of the last 30 stations it has received from. Since we
      > receive pings about once ever 15 seconds during flight, it can be difficult
      > to copy all of the relevant information down on paper fast enough before the
      > next ping comes in and replaces it. No to mention it all then has to be
      > input into Google Earth manually before we can begin looking for the rocket,
      > which usually burns valuable daylight at our launch site in the desert. Also
      > I should mention I am aware of the PC software that comes with the Kenwood
      > (MCP-4A) but as far as I can tell it does not have the capability we need.
      > What I know about APRSISCE so far. From playing around with it and reading
      > the wiki I've gotten my Kenwood talking to APRSISCE no problem. I've also
      > received pings and know I can click on them in the list on the left to show
      > the relevant GPS information. This is already a huge improvement since these
      > appear to be saved until memory is cleared. I tried the record feature but
      > what it recorded seemed like mostly gibberish to me.
      > My question is what would be the best way to isolate the station I would
      > like to track, and then subsequently record the GPS information in a file?
      > Preferably one that can be input into a program like Google Earth. It helps
      > a lot to see the trajectory in 3D when trying to figure out where it landed.
      > Thank you very much in advance! I promise I don't always make gigantic
      > posts!
      > -Aaron
      > KF7RJL
    • Show all 8 messages in this topic