Loading ...
Sorry, an error occurred while loading the content.

22490Re: Temporary digi

Expand Messages
  • g4ilo
    Mar 11, 2013
    • 0 Attachment
      Yes that is indeed what I meant. I erroneously thought the D710 in Packet mode was a KISS TNC.

      Julian, G4ILO

      --- In aprsisce@yahoogroups.com, "Lynn W Deffenbaugh (Mr)" <kj4erj@...> wrote:
      >
      > I believe Julian meant APRSISCE/32 controlled digipeatingin via a
      > Kwd710(APRS) type port.
      >
      > In any of the non-KISS modes (aka CONVerse modes), the UNPROTO x VIA y
      > doesn't support flagging a path component as "used" (*) which is a
      > digipeating requirement.
      >
      > Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
      >
      > On 3/10/2013 2:17 PM, Robert Bruninga wrote:
      > > Clarification:
      > >
      > >> I know digipeating isn't supported in APRS mode...
      > > Yes it is. Just use the menu to set UIFLOOD and UITRACE commands.
      > >
      > > Bob, WB4aPR
      > >
      > >> Julian, G4ILO
      > >>
      > >> --- In aprsisce@yahoogroups.com, "Lynn W Deffenbaugh (Mr)" <kj4erj@> wrote:
      > >>> Almost. KWD710(PKT) doesn't support digipeating because the CONVerse
      > >>> interface of this mode doesn't support transmitting a "used" bit in the
      > >>> path which is required for digipeated packets. Digipeating will ONLY
      > >>> work with a KISS-type interface as this is the only mode that gives
      > >>> APRSISCE/32 direct access to all of the bits of the AX.25 packet header
      > >>> including the "used" (*) bit in the path components.
      > >>>
      > >>> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
      > >>>
      > >>
      > >>
      > >>
      > >> ------------------------------------
      > >>
      > >> Yahoo! Groups Links
      > >>
      > >>
      > >>
      > >
      > > ------------------------------------
      > >
      > > Yahoo! Groups Links
      > >
      > >
      > >
      > >
      >
    • Show all 18 messages in this topic