Loading ...
Sorry, an error occurred while loading the content.

22480Re: [aprsisce] Re: Temporary digi

Expand Messages
  • Lynn W Deffenbaugh (Mr)
    Mar 10, 2013
    • 0 Attachment
      I believe Julian meant APRSISCE/32 controlled digipeatingin via a
      Kwd710(APRS) type port.

      In any of the non-KISS modes (aka CONVerse modes), the UNPROTO x VIA y
      doesn't support flagging a path component as "used" (*) which is a
      digipeating requirement.

      Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

      On 3/10/2013 2:17 PM, Robert Bruninga wrote:
      > Clarification:
      >
      >> I know digipeating isn't supported in APRS mode...
      > Yes it is. Just use the menu to set UIFLOOD and UITRACE commands.
      >
      > Bob, WB4aPR
      >
      >> Julian, G4ILO
      >>
      >> --- In aprsisce@yahoogroups.com, "Lynn W Deffenbaugh (Mr)" <kj4erj@...> wrote:
      >>> Almost. KWD710(PKT) doesn't support digipeating because the CONVerse
      >>> interface of this mode doesn't support transmitting a "used" bit in the
      >>> path which is required for digipeated packets. Digipeating will ONLY
      >>> work with a KISS-type interface as this is the only mode that gives
      >>> APRSISCE/32 direct access to all of the bits of the AX.25 packet header
      >>> including the "used" (*) bit in the path components.
      >>>
      >>> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
      >>>
      >>
      >>
      >>
      >> ------------------------------------
      >>
      >> Yahoo! Groups Links
      >>
      >>
      >>
      >
      > ------------------------------------
      >
      > Yahoo! Groups Links
      >
      >
      >
      >
    • Show all 18 messages in this topic