22457RE: [aprsisce] Re: Temporary digi
- Mar 2, 2013APRSIS32 still makes a great display medium for events, don't give up on it for that aspect.
Sent: 3 Mar 2013 02:05:49 GMT
Subject: [aprsisce] Re: Temporary digi
Thanks to all for the assistance. All set. I'll leave APRSIS out of the digipeating picture and rely only on the TM-D710 to be the WIDE1-1 digi. No further comments from me.
--- In email@example.com, James Ewen wrote:
> On Sat, Mar 2, 2013 at 4:19 PM, Adam Mahnke wrote:
> > As James has said you'll need to work with the D710 Manual for Menu
> > 618-620 for the digipeat settings.
> Nope, I said Menu 620... not 618 nor 619.
> > I recommend the following
> > 618 UIDIGI On Alias WIDE1-1
> > 619 UIFLOOD Off
> > 620 UITRACE On Alias WIDE
> 618 is a simple alias substitution routine, and should be left off if
> you are going to enable 620 on WIDE.
> 620 will enable WIDEn-N digipeating for any combination of values of n
> and N. There is no need to play with menu 618 in this case.
> If you are looking to only act as a fill-in digipeater (ie. only act
> upon WIDE1-1), then leave menu 620 off, and enable Menu 618 as
> indicated above.
> Be aware that menu 618 and 620 act upon the packet differently. 618
> will simply replace the alias with the station callsign, whereas 620
> will insert the station callsign, and then decrement the SSID. In both
> cases the station callsign will be marked as used up, and if the SSID
> of the alias is zero, it too will be marked as used up.
> Both settings will work, and packets will be digipeated, but the
> subsequent packets will look different if anyone is analyzing the raw
- << Previous post in topic Next post in topic >>