Loading ...
Sorry, an error occurred while loading the content.

22454Re: [aprsisce] Re: Temporary digi

Expand Messages
  • Adam Mahnke
    Mar 2, 2013
    • 0 Attachment
      Got it, which is why I use the D710 in native APRS mode as much as possible.

      Adam
      KC2ANT

      -----Original Message-----

      From: Lynn W Deffenbaugh (Mr)
      Sent: 3 Mar 2013 00:04:21 GMT
      To: aprsisce@yahoogroups.com
      Subject: Re: [aprsisce] Re: Temporary digi

       

      The D710 in APRS mode supports digipeating all by itself.  And APRSISCE/32 can co-exist in that mode using the KWD710(APRS) port type.

      If you want APRSISCE/32 to control the digipeating, it'll have to be a KISS-type port, regardless of the radio/TNC.  The AGW interface even uses raw AX.25 packets similar to KISS.

      Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

      On 3/2/2013 6:30 PM, Adam Mahnke wrote:
      DOH, and that's why you get paid the big bucks for development *grin*

      so if/when Digi is required via the D710, it'll have to be a KISS port? or does the D710 just not support it at all? 

      Adam
      KC2ANT


      To: aprsisce@yahoogroups.com
      From: kj4erj@...
      Date: Sat, 2 Mar 2013 18:22:11 -0500
      Subject: Re: [aprsisce] Re: Temporary digi

       

      On 3/2/2013 6:19 PM, Adam Mahnke wrote:
      You'll need to set up a new port to the D710 using the KWD710(PKT) port type. From there I suggest following

      http://aprsisce.wikidot.com/port-configuration  (Highly recommend you watch this video anyway if you've never set up APRSIS32 at all in the past.)

      The video discusses radio ports around the 2 minute mark, just choose the KWD710(PKT) instead of KISS

      Almost.  KWD710(PKT) doesn't support digipeating because the CONVerse interface of this mode doesn't support transmitting a "used" bit in the path which is required for digipeated packets.  Digipeating will ONLY work with a KISS-type interface as this is the only mode that gives APRSISCE/32 direct access to all of the bits of the AX.25 packet header including the "used" (*) bit in the path components.

      Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32




    • Show all 18 messages in this topic