Loading ...
Sorry, an error occurred while loading the content.

21414RE: [aprsisce] APRIS32 Transmit stops Kenwood D710 from decoding packets.

Expand Messages
  • Tony VE6MVP
    Dec 19, 2012
    • 0 Attachment
      At 05:08 AM 2012-12-19, Adam Mahnke wrote:

      Which of the 2 D710 ports are you using?

      The APRS one allows the D710 to stay in it's native APRS mode and still send packets to aprsisce/32 for display.

      The packet mode turns the D710 into a radio with TNC and the D710 won't decode anything.

      Which two parts are you talking about?    The physical ports one of which is in the radio body and used to program the memory channels and the other which is in the head and is the TNC?    If so I'm hooked up to the TNC port in the head. 

      Or do you mean there are two COM ports in Windws?   Which there aren't.

      Or do you mean something else?

      Can you share your radio settings at start,

      So you want me to go through every menu item on the D710 and write them down?

      your port configuration choices for aprsisce32, to include the kwdD710 port style you've chosen.

      9600 bps and 8N1 if that's what you mean.

      And then what is displayed on the radio face after transmit with aprsisce32

      Which if the 100 or so icons are you specifically interested in?

      Tony

      -----Original Message-----

      From: Tony VE6MVP
      Sent: 19 Dec 2012 07:43:37 GMT
      To: aprsisce@yahoogroups.com
      Subject: [aprsisce] APRIS32 Transmit stops Kenwood D710 from decoding packets.

       

      Folks

      When I click on Transmit in APRSIS32 I see the following in the port log.    Then the Kenwood  D710 TNC stops decoding packets on the D710 display until I do a power off/on cycle on the D710 radio.  Whereupon the D710 starts decoding packets and sending them to APRSIS32.

      Port(KwdD710):2012-12-19T07:21:39.590 Kenwood[85]:INSFRE>APOT30,ELKPNT,VERMLN,WIDE2*:!5322.58NS11131.71W#PHG3530\W2,AB7,Innisfree VA6BF
      Port(KwdD710):2012-12-19T07:21:41.836 Kenwood[79]:INSFRE>APOT30,LLOYD*,WIDE2-1:!5322.58NS11131.71W#PHG3530\W2,AB7,Innisfree VA6BF
      >>>>   I hit the transmit menu item.
      Port(KwdD710):2012-12-19T07:22:36.436 Command[4]:TC 0
      Port(KwdD710):2012-12-19T07:22:36.436 Output[5]:TC 0<0D>
      Port(KwdD710):2012-12-19T07:22:36.499 Command[3]:^M~
      Port(KwdD710):2012-12-19T07:22:36.499 Output[1]:<0D>
      Port(KwdD710):2012-12-19T07:22:37.513 Missed Expected Response(cmd:) From Command(^M~!cmd:!1)
      Port(KwdD710):2012-12-19T07:23:56.651 Kenwood[14]:KWXIMON  was 0
      >>>>> Several packets were received but not displayed on the D710 or received by APRSIS32
      >>>>> power cycle D710
      Port(KwdD710):2012-12-19T07:24:06.402 Kenwood[98]:VE6RHS>APWW10,CHPMAN,INSFRE,WIDE2*:/002400h5331.82N/11326.74W_031/000g000t-00r000p002P000h66b00000
      Port(KwdD710):2012-12-19T07:24:12.096 Kenwood[94]:BICHE>APOT21,ELKPNT,WIDE2*:!5446.95NS11213.12W#CNT00000 PHG4530/W2,  ABn,  Lac La Biche VE6SRV

      I have hit the Transmit button a number of times in the past few months and the local digis have happily sent back my beacon.    But not now.  This also happens when I go to send an APRS message which I've done lots of although not in the past few weeks.   Restarting APRSIS 32 does not help and there is a very similar if not identical message at the bottom of the port log.

      Any ideas what I might be doing wrong?

      Tony
    • Show all 20 messages in this topic